Make your Vista's admin account acts like in XP


Recommended Posts

Wonderful guide.

Curious though, is there any way to remove the "run as administrator" function on context menus, since there's no longer any use for it(Or is there)?

If It involves resource hacking, it doesn't matter. I want to leave my Vista 'un-hacked'. >.>

@bradavon: I still can't figure out how to do that too. I added the bit about IE7 to the first post, I didn't notice it since I don't use IE :D thanks a lot.

@neospyce: Thanks for the link!

@Sniper101 & jamesyfx: You're welcome! :) I don't think there's a way to remove "Run as admin", but if you found a way let us know ;)

Wonderful guide.

Curious though, is there any way to remove the "run as administrator" function on context menus, since there's no longer any use for it(Or is there)?

If It involves resource hacking, it doesn't matter. I want to leave my Vista 'un-hacked'. >.>

Merge "RunAsAdmin_Exe-.reg" to remove the "Run as Administrator" Context Menu Item from all exe files.

Merge "RunAsAdmin_Exe+.reg" if you want to restore the "Run as Administrator" Context Menu Item.

RunAsAdmin.zip

I created these regfiles for the Take Ownership Context Menu Item.

? ? TakeOwn.png

More info @ Vista - Tips, Tricks & Tweaks:):)

Merge "RunAsAdmin_Exe-.reg" to remove the "Run as Administrator" Context Menu Item from all exe files.

Merge "RunAsAdmin_Exe+.reg" if you want to restore the "Run as Administrator" Context Menu Item.

RunAsAdmin.zip

I created these regfiles for the Take Ownership Context Menu Item.

TakeOwn.png

More info @ Vista - Tips, Tricks & Tweaks. :)

Sweet.

Heres a nice little tool:

http://www.tweak-uac.com/

  • 2 weeks later...
  • 3 weeks later...
@bradavon: I still can't figure out how to do that too. I added the bit about IE7 to the first post, I didn't notice it since I don't use IE :D thanks a lot.

No worries, glad I could help. If you like you can delete my ramblings above the main point of my post. The important part is when I discuss DropMyRights.

I too don't use IE but on occasion you have to when the site isn't FF compatible, or the you come across the odd site that uses ActiveX.

Is there a way to REVERSE this ?

I must admit, I've rarely used the "Administrator" log in, and only then by accident.

I'd like to go straight to my Phil K account.

How do I get shot of this ?

Yes there's!

1- Click Start, and type "cmd" in the search area, right click on "Command Prompt" and select 'Run as Administrator".

2- In the command prompt type "net users Administrator /active:no" (Note the capital "A" in Administrator) and press Enter, you will get a confirmation as "The command completed successfully".

Reboot and it'll go to the active account directly :)

Welcome everyone.

Yes there's!

1- Click Start, and type "cmd" in the search area, right click on "Command Prompt" and select 'Run as Administrator".

2- In the command prompt type "net users Administrator /active:no" (Note the capital "A" in Administrator) and press Enter, you will get a confirmation as "The command completed successfully".

Reboot and it'll go to the active account directly :)

Welcome everyone.

Cool. New little bit there.

Yes there's!

1- Click Start, and type "cmd" in the search area, right click on "Command Prompt" and select 'Run as Administrator".

2- In the command prompt type "net users Administrator /active:no" (Note the capital "A" in Administrator) and press Enter, you will get a confirmation as "The command completed successfully".

Reboot and it'll go to the active account directly :)

Welcome everyone.

Worked beautifully.

Thanks !

  • 1 month later...
maybe someone could post some reg tweaks for the above keys, so that we can just copy and paste them into notepad and save them as .reg files, would be very handy:)!

I know that the point of this tutorial is to move the annoying messages that warn you about almost every top level action you attempt, but after careful consideration, I think it's a good idea to be warned. Windows XP (mostly before SP2), was a completely in-secure file system with regards to administrative permissions. User accounts in both the Home and Professional editions of Windows XP were by default given administrative permissions over the system they presided in.

I think Microsoft has made a smart move by ensuring that users aren't able to harm them-selves. I understand there are those of you out there who are obviously careful and cautious enough to be able to take care of yourselves, but the majority is often the dumber fraction. ;)

  • 1 month later...
  • 3 weeks later...

Hey :)

This doesnt seem to work very well. Everytime I try to copy and then paste something in Program Files it never allows me even if I say yes to the UAC prompt. While in my original admin account when I installed Vista, I could.

Why?

  • 8 months later...
Hello Tantawi, thanks for the welcome.

Thanks for that reg fix. It looks like it adds a context menu which dumps you at a DOS command prompt. It's a start but I'd prefer a Full Admin account like XP.

Even if I didn't use it all the time it would be nice to know it's possible. For example I've not worked out how to be able to rename files in the WINDOWS\SYSTEM32 folder (unless I take ownership of that too) which you may need to do if you need to delete/rename a system file.

Has anyone worked how to do this? Surely it's possible. I believe the difference here is the Administrator account (the proper one) in Vista still doesn't own certain folders, they're owned by the SYSTEM account (which cannot logged in with) as opposed XP where you own each and every folder.

That thread is great though, it's chocker block with goodies. I'll have to get reading :D

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Can I suggest you add a disclaimer to your first post explaining disabling UAC takes Vista's IE7 Protected Mode with it.

This basically lowers IE7 to a Limited User (lower than the Semi-Admin you're logged in with). This is something IE7 users may not be aware of, even if you enable Protected Mode from Internet Options it stays disabled (just like UAC). There is a fix however.

If you want UAC disabled but Protected Mode on use DropMyRights which was written for XP but works just the same in Vista (I tested it last night), not only that but using it actually turns Protected Mode back on (i.e - instead of saying Protected Mode: Off it will say On). Therefore proving Protected Mode and DropMyRights are on and the same thing.

What is DropMyRights I hear you say, read on: http://msdn2.microsoft.com/en-us/library/ms972827.aspx

It was written by a Microsoft bloke but isn't officially supported. I use the /c switch to make it even more secure. I've been using it for months and bar ActiveX installs (which need admin rights) not one website has fallen over. You can prove it works by trying to save a file into the SYSTEM32 folder, it won't let you.

The great thing is it's completely seamless, works on XP or Vista (probably 2000 too) and lets you get the good bits out of UAC without the bad. Just set the shortcut for each Internet enabled program to use it and make sure you choose Open "Minimised" and it's seamless.

I tried this but it always gives me a invalid path....

it says C:\programs doesnt exist.

  • 2 weeks later...

yeah currently I use a real admin account with no UAC at all however I think UAC is a good idea as it follows the unix motto of trying to keep things running in limited priviledge mode. So I do plan at some point to move back to a UAC environment on my vista box and work around the non admin mode problems I had.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello police? I'd like to report a murder.
    • Ventoy 1.1.15 is out.
    • Win11Debloat 06.24.2026 by Razvan Serea Win11Debloat is a lightweight, easy to use PowerShell script that allows you to quickly declutter and customize your Windows experience. It can remove pre-installed bloatware apps, disable telemetry, remove intrusive interface elements and much more. The script also includes many features that system administrators and power users will enjoy. Such as a powerful command-line interface, support for Windows Audit mode and the option to make changes to other Windows users. All changes made by Win11Debloat can be easily reversed, and most removed apps can be restored via the Microsoft Store. A full guide on how to undo the changes is available here. Win11Debloat features: Below is an overview of the key features and functionality offered by Win11Debloat. Please refer to the wiki for more information about the default settings preset. Remove a wide variety of preinstalled apps. Click here for more info. Disable telemetry, diagnostic data, activity history, app-launch tracking & targeted ads. Disable tips, tricks, suggestions & ads across Windows. Disable Windows location services & app location access. Disable Find My Device location tracking. Disable 'Windows Spotlight' and tips & tricks on the lock screen. Disable 'Windows Spotlight' desktop background option. Disable ads, suggestions and the MSN news feed in Microsoft Edge. Hide Microsoft 365 ads on the Settings 'Home' page, or hide the 'Home' page entirely. Disable & remove Microsoft Copilot. Disable Windows Recall. Disable Click to Do, AI text & image analysis tool. Prevent AI service (WSAIFabricSvc) from starting automatically. Disable AI Features in Edge. Disable AI Features in Paint. Disable AI Features in Notepad. Disable the Drag Tray for sharing & moving files. Restore the old Windows 10 style context menu. Turn off Enhance Pointer Precision, also known as mouse acceleration. Disable the Sticky Keys keyboard shortcut. Disable Storage Sense automatic disk cleanup. Disable fast start-up to ensure a full shutdown. ...and more. Once you’ve downloaded the Win11Debloat file (Get.ps1), just follow these quick steps: Locate the Get.ps1 script file. Right-click the file and select Run with PowerShell from the context menu. If prompted by User Account Control (UAC), select Yes to grant the script the necessary administrative permissions. Win11Debloat 06.24.2026 changelog: With this release, the legacy app list generator and CustomAppsList file support is removed. This only affects users using legacy command-line methods. More info here: #664 Features & Improvements Clean up styling to better match Windows fluent design guidelines by @Raphire in #638 Add GPO override warning alert and WhatIf dry-run previews by @HetCreep in #611 Disable telemetry-related scheduled tasks under Microsoft\Windows by @HetCreep in #615 Guard against loading, saving & executing undefined features by @Raphire in #665 Simplify Window management & update minimum window sizes by @Raphire in #671 Update start menu backup/restore with timestamped filenames by @Raphire in #672 Clean up feature execution logic for readability by @Raphire in #641 Clean up & improve app removal methods, remove legacy CLI app removal methods by @Raphire in #662 Remove support for CustomAppsList file format, including -RemoveAppsCustom and -RunAppsListGenerator parameters Update CLI app removal to use newer app removal methods Drop support for sunset apps (Fitbit, Shazam, Twitter, Viber, Wunderlist, XING) and Plex Fix removal of Microsoft Copilot Fixes Fix: Replace P/Invoke dynamic DLL imports with WPF native methods to fix temp DLL access-denied errors by @Raphire in #661 Fix Start Menu apps not being set correctly for all users when running script for other user by @Raphire in #637 Fix store suggestions not getting disabled correctly for all users when running as other user by @Raphire in #642 Fix: Respect Feature min/max version for comboboxes by @Raphire in #639 Fix: Don't treat AllUsers/CurrentUser as a username at startup by @HetCreep in #647 Fix: treat dismissed unsafe-removal confirmation as decline by @HetCreep in #651 Fix: Surface runspace errors instead of swallowing them in GUI mode by @HetCreep in #655 Fix: Correct sub-key path matching in backup allow-list validation by @HetCreep in #645* Fix: Detect WinGet uninstall failures by exit code, not English text by @HetCreep in #658 Fix: Detect installed OneDrive in the "Only show installed" filter by @HetCreep in #656 Download: Win11Debloat 06.24.2026 | Open Source View: Win11Debloat Home Page | Screenshots 1| 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Age of Empires Mobile PC Version The Band The Show The Movie
  • Recent Achievements

    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      416
    2. 2
      +Edouard
      173
    3. 3
      PsYcHoKiLLa
      125
    4. 4
      Michael Scrip
      77
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!