Optimize XP for Dual Core


Recommended Posts

I thought i would create a little guide about optimizing dual core for Windows XP. As i just got one (core 2), I was doing research on how to make XP run as fast as possible with my new CPU. As many probably know that Windows XP does support dual core processors but it doesn't really optimize the operating system for it, nor does it really take advantage of the extra speed. But with a few steps, you can make sure you get the most of your multi core setups (as well as the Pentium 4's with Hyper Threading). There are separate things you must do.

1. For Intels

Little less work for us Intel users. All you had to do is download the hotfix from Microsoft which you can download here. This fix is not an automatic download via windows update.

Other languages can be found here.

German (DEU) - http://www.laptopvideo2go.com/drivers/ms_k...-v3-x86-deu.exe

English (ENU)- http://www.laptopvideo2go.com/drivers/ms_k...-v3-x86-enu.exe

Spanish (ESN)- http://www.laptopvideo2go.com/drivers/ms_k...-v3-x86-esn.exe

Portuguese (PTB)- http://www.fileplanet.com/172060/170000/fi...Brazilian-Patch

French (FRA) - http://www.laptopvideo2go.com/drivers/ms_k...-v3-x86-fra.exe

Italian (ITA)- http://www.laptopvideo2go.com/drivers/ms_k...-v3-x86-ita.exe

Dutch (DUT) - http://www.laptopvideo2go.com/drivers/ms_k...-v3-x86-dut.exe

Turkish (TRK)- http://www.laptopvideo2go.com/drivers/ms_k...-v3-x86-trk.exe

1. For AMD users

AMD users have two options. First though, they must get the driver for their cpu, which can be found here. One you download that, make sure you restart your comp. Once that is installed you can install the microsoft hotfix from above or it is recommended you use the dual core optimizer from AMD, as this will later let you skip a step where you get dirty with the boot.ini file. The dual core optimizer can be downloaded from here. DO NOT DOWNLOAD AND USE both the Microsoft fix and the AMD dual core optimizer, reports say that it'll make your comp blue screen like crazy. Do either or, but do the AMD solution first. If the AMD solution gives you blue screens, go into safe mode (hit F8 during boot up) and uninstall it, then install the Microsoft hotfix.

After you do any of these updates (other then the AMD cpu one) DO NOT RESTART THE COMP, we have to do a couple of things first. So now it's time to get a little dirty.

2. Registry Tweaking

(k let's make this clear, the next two steps i take no responsibility, if you eff up your system that is your problem, but this DOES work, make sure you do exactly as I tell you)

Go to the registry edit via the run command. (Windows key + R---> type in "regedit"). Look for this HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager and then look for the key (or folder) named Throttle. If it's not there, right click Session Manager, go new and then Key. Name it Throttle. In there there should be a DWORD called PerfEnablePackageIdle make sure the value = 1. If not, make it say 1. If the key is not there, create it. Right click an area in that box, and go new DWORD. This will increase performance A LOT.

3. Boot.ini File

If you are AMD user and you used the AMD Dual Core optimizer this step is done for you :cool:. (lucky buggers) But for us intel guys, time to get a little dirtier.

We need to add /usepmtimer to end of the your boot value.

(note your boot value make look different from mine mainly because i have done changes to mine, but no matter what, make sure that value is there somewhere, mines in the middle of it by default, but for the sake of this tutorial i put it at the end)

To get to your boot.ini file right click "My Computer"--->Properties--->Advanced--->Settings(under Startup and Recovery)--->Edit

  Quote
[boot loader]

timeout=0

default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /TUTag=GEKOSS /Kernel=TUKernel.exe /usepmtimer

So do it like that. Now restart your computer and you'll be good to go :).

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

For your sceptics out there, check out this review of a sager laptop with the fix applied. Not only does it fix the games in this review, but a lot of the newer ones (such as HL2 or GRAW and the upcoming unreal tournament 3) this will give you a nice boost in performance.

http://www.notebookreview.com/default.asp?...view=Sager+5760

Good Luck

Link to comment
https://www.neowin.net/forum/topic/545980-optimize-xp-for-dual-core/
Share on other sites

I just did it on my machine w/ HT, and it kinda a mixed results, Its not Slower, but the UI speed up and so did the order of programs loading.

It used to load say: 1/2/3/4 now it will load, 2/4/1/3 I guess it had to do with how CPU intensive the program is.

since i'm an AMD user my boot.ini looks different than what you posted

[boot loader]

timeout=3

default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /usepmtimer

is that normal for AMD or do I need to modify it according to what you show?

matt

  AltecXP said:
I just did it on my machine w/ HT, and it kinda a mixed results, Its not Slower, but the UI speed up and so did the order of programs loading.

It used to load say: 1/2/3/4 now it will load, 2/4/1/3 I guess it had to do with how CPU intensive the program is.

Just with the patch the UI Speeds up for me so theres no gaming performance or havnt tried gaming yet?

  matty13 said:
Just with the patch the UI Speeds up for me so theres no gaming performance or havnt tried gaming yet?

I don't Game.

  gable said:
since i'm an AMD user my boot.ini looks different than what you posted

[boot loader]

timeout=3

default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /usepmtimer

is that normal for AMD or do I need to modify it according to what you show?

matt

You already have what he shows....

  gable said:
since i'm an AMD user my boot.ini looks different than what you posted

[boot loader]

timeout=3

default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /usepmtimer

is that normal for AMD or do I need to modify it according to what you show?

matt

every boot file is different, just make sure you have the "/usepmtimer" at the end

  digitalnemesis said:
There is no point installing the hotfix for intel users. It is only supposed to solve the problem with AMD cpus that drop the multiplier to save power and causing a performance decrease when it doesn't increase the multiplier when needed.

the hotfix does help for intel users.

and yes this helps cpus with Hyperthreading as well

  digitalnemesis said:
There is no point installing the hotfix for intel users. It is only supposed to solve the problem with AMD cpus that drop the multiplier to save power and causing a performance decrease when it doesn't increase the multiplier when needed.

Intel's do that.

Anyway, i could notice a performance increase with it installed, after i reformatted i noticed windows was favouring one core over the other (e.g. one app is using 99% of one core, but it continues to run apps on that core, slowing them down)

  The_Decryptor said:
Intel's do that.

Anyway, i could notice a performance increase with it installed, after i reformatted i noticed windows was favouring one core over the other (e.g. one app is using 99% of one core, but it continues to run apps on that core, slowing them down)

Yes, I know intel's do that. I have a core 2 duo e6600 cpu.

What I am saying is that the AMD cpus that drop the multiplier do not efficiently increase the multiplier once needed again, thus decreasing performance in some cases. This hotfix ensures the multiplier will increase immediately, instead of incrementally

  hotdog963al said:
Has anyone else actually done this? Does it make a difference?

Last time I installed the AMD Dual core drivers my system BSOD'd on boot, so I'm quite reluctant to test it out.

I installed it at work for an X2 4600 I believe and it didn't seem to make much of a difference. But it didn't seem to crash the computer. From what I read at the link at the top of the page, BSOD's only really occurred if you installed the MS patch as well as AMD patch (not optimizer). So I would install the AMD patch and then the optimizer (as long as you are sure the MS patch hasn't been installed).

I am going to try this on my gaming pc and report back.

Hmmm. Dual core Pentium D here. Already installed the hotfix months ago, and my XP is pretty well tweaked and really flys, so wasn't expecting any discernible difference at all from steps 2 and 3, but, hmmm, maybe just my imagination, but I'm pretty sure a good second or two just got shaved off my bootup, and everything does seem just a little bit snappier now. Sweet. Thanks!

  • 2 weeks later...
  iCeFuSiOn said:
Just FYI, the reliability update that is being pushed to Windows Update for Windows XP users now that resolves 0xA and 0x1 blue screen errors includes a newer kernel than the one used in KB896256.

Version 5.1 (Build 2600.xpsp_sp2_qfe.061219-0311 : Service Pack 2)

Hmm. So if I plug a fresh installed XP SP2 PC into the net, download all available updates on WU, then I won't need to apply this fix?

I'm somewhat confused as to whether I need to or not. I have a Core 2 Duo.

Been reading loads of stuff on the net about it, but the fact is, I can't determine whether or not I need to do some or all of the following:

1. Install KB896256 patch

2. Set "PerfEnablePackageIdle" to 1 in registry

3. Add /usepmtimer to Boot.ini

There doesn't seem to be a decisive answer, and some of the discussions go back to 2005. Especially with the latest kernel build now being higher on an uptodate XP box compared to one with KB896256 applied.

Confused :s

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Save 90% on a 12min Premium lifetime subscription, and power through books by Steven Parker Today's highlighted deal comes via our Apps + Software section of the Neowin Deals store, where you can save 90% on a lifetime premium subscription to 12min Micro Book Library. Power through important books and interesting topics in just 12 minutes each. 12min gives you access to hundreds of micro books in text and narrative form for you to explore. Every month, you'll get 30 new titles that are designed to be read and digested in just 12 minutes so you can learn on the go. Search for any book title in the extensive library or suggest new breakdowns to the 12min experts and they'll add it to the library. You can choose micro books from many different genres, send them to your Kindle Account, and enjoy reading them even while not having internet access. Expand your knowledge despite a busy schedule by reading micro books from different topics Select a book that you want & the 12min team will synthesize it into a short but comprehensive micro book Access micro books in text or audio forms Read anywhere with or without internet connection Good to know Length of access: lifetime This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Note: Offer must be redeemed on desktop before being useable on mobile A Premium subscription to 12min normally costs $399.90, but you can pick this up for just $39.99 for a limited time. For a full description, terms and license click the link below. Get a 12min Premium lifetime subscription for just $39.99 (90% off) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • The $100 million mark was rejected a couple of days ago.
    • This super-powerful GaN charger with four ports is 50% off by Taras Buria Some time ago, I reviewed the Cuktech 10, a powerful 100W GaN charger with three ports. It left positive impressions, and since then, it has served me as my primary charger for my phone, watch, laptop, and tablet. Recently, Cuktech offered me the opportunity to take a look at the model 15, a more powerful 140W GaN charger, this time, with four ports. Right now, this powerful charger is available with a massive discount at just $50.99 (with coupon applied). The Cuktech 15 is the same as the Cuktech 10, just slightly bigger, more powerful, and with one extra port. It has a light metallic finish, but overall, it retains the brand's identity and features. The four ports are well spaced out, and the black plastic insert with a cyan rim has a ribbed texture for better grips. Although I live in Europe, Cuktech sent me a US variant with a retractable plug. Okay, I guess. The ability to retract the plug makes it extra portable, which is nice. A high-power 240W five-foot cable is also included. The charger measures 3.11 x 2.56 x 1.26 inches and weighs 0.737 lbs. The Cuktech 15 has four ports: two high-power Type-C ports, one Type-C port with a lower output, and one Type-A port. The first two Type-C ports can deliver a full 140W in single-port mode (PD 3.1 supported), which is nice—no asterisk or caveats here with combined power or something. If you need the full 140W for one device, you get it. Ports are capable of working in the following modes: Single-port Type-C1 / C2: 140W max 5V 2A, 5V 3A, 9V 3A, 11V 6.1A, 12V 3A, 15V 3A, 20V 5A, 28V 5A Type-C3: 33W max 5V 2A, 5V 2.4A, 9V 2A, 12V 1.5A, 11V 3A Type-A: 18W max 5V 2A, 5V 3A, 9V 2A, 12V 1.5A Multi-Port Type-C1 + C2: 100W + 33W or 65W + 65W Type-C1/C2 + Type-C3: 100W + 33W Type-C1/C2 + Type-A: 100W + 18W Type-C1 + Type-C2 + Type-C3: 65W + 60W + 7.5W or 45W + 45W + 18W Type-C1 + Type-C2 + Type-C3 + Type-A: 65W + 60W + 7.5W As you can see, the charger is pretty robust, and it can power two pretty powerful laptops at once and even have enough oomph to charge a smartphone, albeit at a lower power. Another thing worth mentioning is that the Cuktech 15 delivers "clean" power with pretty low pulsations at about 25-50 mV. The rule of thumb is that the lower the pulsations, the better the charger is for your device's battery health. In this area, Cuktech's charger does not disappoint, and they deliver way better results than 100 mV, which is considered a standard for a good charger. Cuktech uses gallium nitride technology, which enables smaller, more powerful and efficient charging. Speaking of efficiency, the charger is rated for 78% average or 64% at a 10% load. When charging at 120W, I received an average of 80-85%, which is good. Of course, when charging at peak power, it gets hot, but not too much. The Cuktech 15 140W usually costs $99.99, which is undoubtedly not cheap. However, right now, you can get it for half the price, which is a very good deal, considering you get a high-quality charger with plenty of ports and very high power output. Like with the Cuktech 10, you cannot go wrong with this one. CUKTECH 15 140W four-port GaN charger - $50.99 | 30% off + a 20% off coupon As an Amazon Associate, we earn from qualifying purchases.
    • Awesome book, just hope they don't screw up Rocky and the story
    • KDE's KClock is getting Wayland Picture-In-Picture support by David Uzondu The KClock app for KDE Plasma over the years has received a number of updates, like better integration with KRunner and a dedicated background service (kclockd) for managing alarms. Now, it looks like KDE devs want to add something cool: pop-out timers using the new Picture-in-Picture protocol for Wayland. Image: Kai Uwe Broulik This all started from a simple observation. Kai Uwe Broulik, a KDE developer, saw someone using a small timer window during a presentation and thought it was a good idea. The problem is that achieving this kind of "always on top" behavior is handled differently between the old X11 display server and the newer Wayland. With X11, an application could pretty much do whatever it wanted. If a program wanted to draw a drop-down menu, it would just create a borderless window, place it in a specific spot, and grab all user input. Wayland operates on a different philosophy. As Broulik notes, under Wayland, the application describes what it wants, and the compositor gets to decide how to handle it. A drop-down menu is an XDG Popup. The application tells the compositor which button spawned it, and the compositor handles the placement and behavior. This is much more secure and consistent. It also means an application cannot just decide to keep its window on top of everything else. This restriction prevents a web browser from implementing an overlay video player under Wayland. To get around this in a standardized way, a proper Wayland support model for Picture-in-Picture, or PiP, was needed. Enter the xx-pip-v1 protocol. It is a new protocol designed specifically for creating floating PiP windows, and KWin, Plasma's compositor, recently gained support for it. Because it is an experimental protocol, its use is gated behind an environment variable, KWIN_WAYLAND_SUPPORT_XX_PIP_V1. A new protocol is fine for demos, but it needs a real application to find its weaknesses. So Broulik implemented it in KClock. This work allows KClock to offer pop-out timers and even a pop-out stopwatch in a small PiP window. The user could get system-wide options to control where the PiP window appears, or if it appears at all, and have that setting apply to every single application that uses the protocol. You can check out the merge request on GitLab for more technical details about this feature.
  • Recent Achievements

    • One Month Later
      CHUNWEI earned a badge
      One Month Later
    • Week One Done
      TIGOSS earned a badge
      Week One Done
    • First Post
      henryj earned a badge
      First Post
    • First Post
      CarolynHelen earned a badge
      First Post
    • Reacting Well
      henryj earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      475
    2. 2
      +FloatingFatMan
      195
    3. 3
      ATLien_0
      163
    4. 4
      Xenon
      80
    5. 5
      Som
      76
  • Tell a friend

    Love Neowin? Tell a friend!