[Foobar] Foo AvA by dawxxx666

By dawxxx666
in Tips, Tweaks & Customization

 Share

Recommended Posts

Neowinian

nbanyan

Posted
Posted
I have another problem, every time you play music from a DVD. I get this window.

dibujoir0.jpg

This is probably caused by the Play Count Mod attempting to add it's tags to the audio file. Play Count Mod settings are found under Tools in foobar preferences.

If you don't use the play count info, you can set the "Skip tracks NOT in DB by filetype:" to *

That should make Play Count ignore all files that aren't in you Media Library (I'm assuming that's the DB they're talking about; I could be wrong though)

Neowinian

nbanyan

Posted
Posted
channelspectrumshot2qq1.jpg

I can't get it to align with the reflect, no matter how I resize the foobar window, what could be the problem? It was normal on my first installation.

In the code for the album art panel (rightclick on the panel and choose settings), about half way down is the code for placing the reflected spectrum. Probably the easiest way to find it is to copy the entire page of code into notepad and search for vis.reflect

The lines you're looking fore are:

$panel(Spectrum analyser4,Channel spectrum panel,1,$sub(%_height%,122),$eval({%_width%}/2+3),35,)
$panel(Spectrum analyser14,Channel spectrum panel,2,$sub(%_height%,86),$eval({%_width%}/2+3),25,)

Notice the 1 and the 2 after "Channel spectrum panel". Those are the horizontal position.

To make them align change the 2 to 1 or the 1 to 2 so they're the same.

There are a few other spectrum analyser blocks on this page of code. You can take a look at those and make minor changes there also to see if it changes what you want.

Always good to have a backup of the code in notepad or elsewhere in case you can't figure out how to get back to where it works if you broke something.

Personally, I usually leave the spectrum off because of the extraordinary amount of CPU time it demands (added my own $ifequal($getpvar(vis.reflect),1, at the around the spectrum blocks so I could use the reflect option in settings to turn it on and off)

Rookie

Marfere

Posted
Posted
In the code for the album art panel (rightclick on the panel and choose settings), about half way down is the code for placing the reflected spectrum. Probably the easiest way to find it is to copy the entire page of code into notepad and search for vis.reflect

The lines you're looking fore are:

$panel(Spectrum analyser4,Channel spectrum panel,1,$sub(%_height%,122),$eval({%_width%}/2+3),35,)
$panel(Spectrum analyser14,Channel spectrum panel,2,$sub(%_height%,86),$eval({%_width%}/2+3),25,)

Notice the 1 and the 2 after "Channel spectrum panel". Those are the horizontal position.

To make them align change the 2 to 1 or the 1 to 2 so they're the same.

There are a few other spectrum analyser blocks on this page of code. You can take a look at those and make minor changes there also to see if it changes what you want.

Always good to have a backup of the code in notepad or elsewhere in case you can't figure out how to get back to where it works if you broke something.

Personally, I usually leave the spectrum off because of the extraordinary amount of CPU time it demands (added my own $ifequal($getpvar(vis.reflect),1, at the around the spectrum blocks so I could use the reflect option in settings to turn it on and off)

Thanks for your reply and very informative help :)

Though I don't even seem to have that specific piece of code in the album art code (I right-clicked on the cover art and chosed settings). I did a search in notepad for "vis.reflect" and "Spectrum" but they gave me no results. Can I put in the code manually?

Thank you once again for taking time to help me :)

Neowinian

nbanyan

Posted
Posted 

//////////////////////////////////////////////////////////////////
//										//
//	  FOOAvA by Dawid Szypulski (dawxxx666)		//
//	1.04									//
//	www.dawxxx666.neostrada.pl				//
//										//
//////////////////////////////////////////////////////////////////

//////////////////////////////////////////////
// Global
//$setpvar(first.boot,0)
//Mini mode on/off
$ifgreater(%_height%,119,
	$setpvar(MiniMode,0)
,
	$setpvar(MiniMode,1)
)
// First boot
$ifequal($getpvar(first.boot),0,
$setpvar(first.boot,0)
,
$setpvar(first.boot,1)
)
// Colurs
$select($getpvar(set.colour),
$setpvar(colour,0-140-220)
,
$setpvar(colour,250-50-50)
,
$setpvar(colour,41-185-92)
)

// Hide scrollbar function
$ifgreater($getpvar(playlist_width),$eval({%_width%}/2-6+10),
	$setpvar(scrollbar,1)
,
$ifequal($getpvar(playlist_width),$eval({%_width%}/2-6),	
	$setpvar(scrollbar,1)
,
	$setpvar(scrollbar,0)
))

$ifgreater($getpvar(playlist_width),$eval({%_width%}-2+10),
	$setpvar(scrollbar3,1)
,
$ifequal($getpvar(playlist_width),$eval({%_width%}-2),
	$setpvar(scrollbar3,1)
,
	$setpvar(scrollbar3,0)
))

//-end of Global/////////////////////////////

This is what's at the top of the code. I guess it's the first code page you see when you go to Preferences > Panel UI > Edit Layout.

Neowinian

dongolo

Posted
Posted

im noob on foobar ...... and i have a question whow we save the changes in this foobar skin ... i change the color of the bars, change background and put Cd cover to show.

But every time i close foobar and open .... the foobar loads the Defaut skin

my question is what i have to do for foobar save the changes e made in the skin so i dont have to change it every time i open foobar

cumps

  • 2 weeks later...
Rookie

freeloader105

Posted
Posted

Hey guys,

I just got this script installed but there's one thing I can't figure out: why the library isn't working. I went into Setttings>Media Library and added my the root folder of my music library, yet when I click the 'A' on the bottom right for 'Album List', it only displays the album that I'm currently playing, like so:

19nk88.jpg

What am I doing wrong? Also, what is quick search and how do I access it?

Neowinian

blunt3d

Posted
Posted
Hey guys,

I just got this script installed but there's one thing I can't figure out: why the library isn't working. I went into Setttings>Media Library and added my the root folder of my music library, yet when I click the 'A' on the bottom right for 'Album List', it only displays the album that I'm currently playing, like so:

19nk88.jpg

What am I doing wrong? Also, what is quick search and how do I access it?

Similar problem, is coverflow working for you. I get a text error or something

Rookie

freeloader105

Posted
Posted
Similar problem, is coverflow working for you. I get a text error or something

By coverflow you mean does it show album covers properly? I don't get any text errors, but it still doesn't work right. For example, when start the playback of an album (through the default ugly album browser, since the graphical one doesn't work), it momentarily flashes the correct album cover and goes to 'no cover art' right afterwards.

Rookie

freeloader105

Posted
Posted
Graphical Browser displays active playlist only. This is how foo_uie_graphical_browser works. Covers for Chronflow should be called "folder.jpg", you can change it in Preferences->Display->Chronflow->Album Source->Sources

So what you're saying is that FooAva doesn't allow for a sexy album library browsing interface, only for the current/active playlist?

Neowinian

Nizmox

Posted
Posted

I have the exact same issue with Coverflow.

I've downloaded and installed the Windows Script Control that is required.

I love the skin, but the one thing I think is really lacking is the scroll bars not being coloured. They just look out of place compared to the rest of the skin!

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Valve finally confirms Steam Machine prices, starts at $1049 for 512GB option

      By macoman · Posted

      Death on Arrival
    • Valve finally confirms Steam Machine prices, starts at $1049 for 512GB option

      By LoneWolfSL · Posted

      Valve finally confirms Steam Machine prices, starts at $1049 for 512GB option by Pulasthi Ariyasinghe The $1,428 option The Steam Hardware lineup that Valve announced last year is slowly starting to roll out. Following the recent Steam Controller launch, Valve has now confirmed the price of the Steam Machine, its all-in-one console-like solution for PC gaming in the living room. There are currently four variants being presented, with only the storage and the included controller being the biggest differences. All of the Steam Machines have the same internals consisting of a semi-custom AMD Zen 4 CPU with six cores and 12 threads, an RDNA 3 28CU GPU, 16GB of DDR5 memory, and 8GB of GDDR6 VRAM, all inside the familiar box Valve has been showing off for months now. The Steam Machine base model starts at $1,049. This has a 512GB NVMe SSD but does not come with a Steam Controller. Keep in mind that storage can be expanded with the microSD card slot too. Next, the $1,128 model has the exact same storage as the previous one but it does come with the new Steam Controller. If you need the Steam Machine to have more storage for games and apps than that, then the 2TB tiers are also available. The $1,349 Steam Machine has no controller once again, but it does ship with two extra faceplates (red fabric and solid walnut) to replace the standard black one. The final option costs $1,428, and it adds the controller back into the bundle. The Steam Machine ships with the Linux-based SteamOS. The box has a 1 Gigabit Ethernet port, DisplayPort 1.4, and HDMI 2.0, as well as one USB-C and four USB-A ports. Keep in mind that when purchasing standalone, the Steam Controller has a $100 price tag. With the above bundles, that drops to $80. It's a rather expensive machine for the internals it is touting, though the design and small form factor do help it somewhat. However, at the same time, the lack of upgradability hurts it. Valve says the ongoing parts shortages and massive price hikes for memory were the leading causes for this price. "The overall effect is that our original goal for the price of Steam Machine is no longer viable," added the company. "So the prices we're sharing today reflect the state of the world for manufacturing; or, more accurately, it reflects the price of the components as we've secured them over the past 6 months." Valve wants interested gamers to reserve it now to get the chance to pre-order a Steam Machine starting June 25, with shipping starting on June 29. Head here to sign up. The invites to buy it will be sent in a randomized order.
    • Microsoft is building an AI datacenter that "uses less water than a fast food restaurant"

      By +TRS-80 · Posted

      What the press release doesn’t mention, however, is how much water the natural gas plant itself will consume, Natural gas plants use about 2,803 gallons of water per megawatt-hour produced, which is significantly less than coal-fired plants that use around 19,185 gallons per megawatt-hour. Overall, natural gas plants are more water-efficient, using 584% less water than traditional power plants on average. AI generated
    • AMD 26.6.2 driver brings FSR 4.1 support to RDNA 3 RX 7000 series graphics cards

      By Steven P. · Posted

      /me wonders if I should run 7800 XT tests again.
    • Politically funny images of the World

      By +primortal · Posted

  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In

  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      203
    3. 3
      PsYcHoKiLLa
      97
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      67
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!