Halo 03 |News & General| OFFICIAL


Recommended Posts

The AI really does suck when it comes to driving I have to say. More often than not I'd be sat in the back of the warthog and the driver wouldn't move. The only way to move again was to get out and drive myself (N)

Or the driver will drive back to the start of the level and start going around in circles :angry:

*Waits for the first ever truly-elite experience. Ayepecks:The Videogame That Is Better Than The Rest*

You are a complainer and nothing more. Every time you talk about something, it's always design flaws and never what you actually enjoy.

You couldn't be further from the truth. Read all my posts, pal.

And stop putting words in my mouth, people. If you want to say something dumb, don't attribute it to me if you're going to say it -- attribute it to yourself. Nowhere did I say allies should be "omg uber k1ll3rz!!!111 d13 c0ven@ntttt!!!111", so stop pretending I did. I said it'd be nice if they were even remotely useful on Heroic and Legendary -- more than taking 2 shots and dying. I don't want them to do the work -- I just want them to help out and add to the story instead of dying in 3 seconds.

And I never said I was bad at the game, so stop implying that I did and finding cute little ways to act like I said it (this part is aimed primarily at magik and his God complex).

Ayepecks, I disagree with some of your complaints but I'm not going to be a baby about it like some of the others here. I think you made your point well enough. There's no reason to get into a fanboy tizzy over your opinion- especially when you stated it wasn't a bad game to begin with.

You had asked about the terminals. You need to wait for them to switch to their second message for the achievement to unlock. After about ten seconds of activating one, it will distort and the letters will change. Maybe that was the problem?

anyone clearify what the meta-games are?

http://www.bungie.net/News/content.aspx?ty...link=h3campaign

I'm looking to beat all the levels on meta-game if anyone wants to. The link above pretty much explains how to get all the points. You need 15,000 on each level to get the achievement

You had asked about the terminals. You need to wait for them to switch to their second message for the achievement to unlock. After about ten seconds of activating one, it will distort and the letters will change. Maybe that was the problem?

Yup, you're correct :) I tried that yesterday and it worked.

Mark Rein Says Bungie "Nailed It"

Monday 1-Oct-2007 1:03 PM Epic boss says Halo ushered in the shooter console revolution

Mark Rein, vice president of Gears of War developer Epic Games, has been talking about the success of the Halo franchise and says it's all down to its execution more than anything else.

The latest issue of OXM in the UK features an article about the effect of the Halo series, and why it's become so popular after just three games. Rein is quoted as saying, "I don't look at Halo and go, 'That's the greatest graphics'. I don't look at Halo and go, 'Wow those are the coolest enemies ever'. I look at Halo and go 'They nailed it'. This game is so fun to play, everything works just right."

He continued, "It was the game that pretty much defined - I'm not going to say 100 percent because there were other games, Medal of Honor and games like that, that did such a good job as well. For me Halo ushered in the shooter console revolution. In other words, it showed everybody that, if you made a perfect shooter for the console, you would sell tons. So we owe Halo a lot."

Rein also believes that Bungie's shooter has done wonders for Epic's game engine licensing business too. "It's helped us move to console. It's helped our licensing business because we make an engine that a lot of shooters are made on.

"Halo to me is just perfectly executed. Halo 2? Same thing. Again, great execution. They took it and made it a little bit better and they set a new storyline... same thing, perfect execution."

Gavin Ogden

Source: CVG

I definitely agree with Rein, at least as far as Halo 3 goes. I wasn't a huge fan of the first two -- they were alright -- but Halo 3's pretty fun. You're not going to really be "wowed" by the graphics or certain features, but it's just fun.

The Halo Effect

Rob Fahey 08:00 (BST) 28/09/2007

Microsoft's media strategy drives Bungie's latest into the headlines.

There's almost a sense of festival around the launch of Bungie's long-awaited Xbox 360 iteration of the Halo franchise. We won't see official sales figures for the UK (or, indeed, most other territories) until next week, but Microsoft's Shane Kim already seems on the verge of exploding with joy over $170 million first day sales in the USA, with various retailers also being rolled out to express how ecstatic they are over the figures.

Suffice it to say, then, that Halo 3 has done really rather well - critically, it has scored over 90% from almost every specialist publication in the Western world, and commercially, it seems certain that its launch day is the biggest ever recorded by a videogame.

Consequentially, it may well be the biggest launch day for any media product in history - although the caveat here is that this applies only to the dollar figure. Halo 3's comparisons with other videogame products are eminently valid, but the success of the game in comparison with products in other mediums is inflated by the high price-tag of videogames.

Bring it back to actual unit sales, or the basic number of people who engage with the product on day one, and the figures don't hold up. It's wonderful that so many people are willing to go out and pay a large amount of money for a great game - but while back-slapping is certainly in order, let's not kid ourselves that this represents a "mass-market" phenomenon on the same scale as a huge movie or music release.

This is where the Halo message gets slightly confused. The game sits on a peculiar middle ground between Microsoft's two key ambitions for the Xbox platform. On one hand, the game itself is quite clearly a hardcore gamer's dream - wonderfully polished, crafted and presented it may be, but at heart it is still a heavily multiplayer focused first-person shooter where you play a space marine taking on an alien invasion. For the core audience of Xbox 360 owners, there couldn't be a finer product.

On the other hand, the "media event" status which Microsoft has carefully crafted for Halo 3 speaks volumes about the firm's desperation to break out to a more mainstream audience. Months of forward planning by the company's PR and marketing divisions has seen Halo 3 being widely reported upon in the mainstream press, with television, radio and newspaper reports focusing on launch events around the world.

In London and elsewhere, launch parties were arranged with a coterie of "celebrities" for the tabloid papers to take pictures of. The queues outside retailers were the subject of news reports, and major news outlets cast the net far and wide to try and find anyone who could explain something about the game on air. My own Halo 3 launch day started at 5am with an interview on the BBC's World Business Report - which ended with the rather bemused presenter asking earnestly (and, frankly, somewhat hopefully) whether videogames were "just a fad".

That, in a nutshell, is where the cracks start to show in the Halo 3 phenomenon. This is not a game for the mass market; it's not the kind of game that will encourage casual players or non-gamers to engage with the Xbox 360 or even with gaming in general. In fact, fantastic though it may be, it's not even really a game that will appeal to anyone who doesn't specifically enjoy the first-person shooter genre.

It is annoying, certainly, the much of the mass media has approached the launch of such an anticipated game with a "look at the crazy gamers!" tone in its coverage. It is frustrating to see features on the London launch which focus on the fact that Pharrell Williams looked "bored" rather than on the excitement of the gamers who turned up, referring to them only in condescending terms.

However, it's not surprising to see this reaction. Unlike last year's media frenzy around the Wii, the Halo 3 launch isn't something that can be easily expressed to the non-gamers who cover this subject for the mass media. The Wii is a genuinely mass-appeal product, simply because its appeal can be summed up in simple anecdotes that easily sell the features of the system to a wide audience. Halo 3, however, is a gamers' game; a refinement of a genre whose appeal is almost exclusively to existing players.

Continues..

I liked it a lot. And it's true what Rain sais, to a point that I didn't pay any attention to graphics, or framerates, technical stuff like that. What I really loved was how much fun I have playing all three games. I've played them over and over again without getting bored.

Can't wait for Halo Wars, anyone know how that game is going???

well after playing halo 3 since the 28th im gonna be trading that game in asap not even worth having in my house anymore almost all the people i know is trading the game in anywho im not dissing the game i just can not get into the game at all

Sci-Fi, Serendipity Spawn Halo 3's New Weapons

By Clive Thompson 10.01.07 | 12:00 AM

"Lemme pull out the big gun," says Tom Doyle, a weapon designer for the videogame Halo 3.

On the LCD screen on his desk he's playing an early copy of Halo 3, and the main character, the Master Chief, is hefting a huge tubular weapon. Doyle presses the trigger, and it generates a thin ray of red laser light on a nearby vehicle -- which abruptly transforms into a searing bolt of power that leaves the vehicle a smoking wreck.

"The Spartan Laser," he says with satisfaction. "One shot is all it takes."

The weapon may be fantastical, but like many Halo 3 weapons, the designers at Bungie Studios -- the company that makes Halo -- actually based it on a real-world object: The Galilean telescope beam expander. Doyle and his colleagues happened upon the Galilean laser while reading journals devoted to upcoming military weapons, and watching shows like FutureWeapons on the Discovery Channel. The research, he says, is intended to guide their design by making sure that the weapons are sci-fi but also vaguely plausible according to the laws of physics.

"A lot of our stuff actually is moored in reality," Doyle says. "It's like Star Trek -- it's pseudoscience."

Halo 3 is well on its way to becoming a top-selling game -- pushing more than $170 million in copies on its very first day. That's partly due to the attractive new array of weapons in the game. Halo's gameplay has always been centered around making strategic decisions on the fly -- figuring out what gun will best win a fight. When Wired visited Bungie this summer, the designers were frantically putting the final tweaks on a sizable task: creating twice as many weapons as in the previous Halo.

"For us, the question was, how do you make it new and fresh for people who have been playing Halo 2 for three years now?" said Jamie Griesemer, Bungie's lead gameplay designer.

For Halo 3, Griesemer said, they made several central decisions. Many of the new weapons have costs associated with their benefits: The Spartan Laser may pack a punch, but it takes a few seconds to charge, which leaves the wielder vulnerable.

Griesemer also decided to reduce the clip size on many guns, so that players will have to more quickly dispose of weapons and try out new ones. This, in particular, will shake up the multiplayer online games, which previously suffered when a single, talented player picked up a gun with a huge ammo clip and executed dozens of players before running out of bullets.

Bungie's designers also decided to insert equipment that didn't kill enemies, but simply changed the way a battle played out. That included "power drains," which suck away the defenses of anyone who strays near, and gravity lifts that let players bounce up to higher levels.

Some of the equipment came about through happy accident. One of the most popular new tools -- the "bubble shield," a pocket of temporary protection from weapons -- nearly didn't make it into the game. Bungie's designers had been bandying it about as a concept, but didn't fully commit to developing it for the game until it was featured in a TV advertisement last December. The ad showed the Master Chief throwing down a bubble shield -- with its distinctive, honeycombed shape -- to survive a missile attack.

It looked so cool that Bungie's employees immediately were sold on it. "Everybody went, 'Hey, hmm, that bubble shield is really awesome," said John Staten, Bungie's cinematic director.

The ultimate goal, Griesemer said, is to give players such a range of options that they develop fighting techniques the Bungie designers themselves could never predict.

This summer, the Bungie guys saw it happen. They were playing a game of "capture the flag" on a multiplayer map, and their favorite technique was to use a gravity lift to bounce over the ramparts into the building containing the flag.

But then a journalist came over to play and figured out a new trick: He shot his way into the building, grabbed the flag and used a gravity lift to bounce his way out. The Bungie crew all stared in surprise.

"Then we were all like, 'Of course, no ****! It totally makes sense!'" said Brian Jarrard, Bungie's head of community relations. "But in all those hours of playing, we'd never thought of it ourselves."

Source: Wired

Well I gave in and got the collectors edition today, as expected the game disc was loose inside but it's not scratched as much as I feared. Dunno whether to get a replacement disc or not :unsure:

I'll start playing now :D

Screw it I'll send in the scratched disc to be replaced, when sending it to Microsoft will a CD case in a padded envelope suffice?

The Top 7... Unanswered Questions in Halo 3

Make no mistake - Games Radar loves Halo 3. But while the game may have excellent graphics, music, missions, multiplayer, coop and editing tools, it fails to deliver one crucial element. Closure.

This may have been the end of a trilogy, but it certainly did not feel like the end of Halo. Plot threads remained loose, characters were left in limbo and the fight did not seem entirely finished. With no more sequels announced (yet), what's a puzzled and perplexed fan to do?

Source: http://n4g.com/xbox360/News-71548.aspx

I beat the game yesterday and I think it was way too short and there will be another Halo. :)

The game, on a good difficulty level, is about 12 hours. That's too short for an FPS? I though Half-Life 2 was shorter. :p

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Neowin is saying these are good prices? Thats crazy. As others have said they are just ######. Time for big tech to bring down the prices for real not this fake crap.
    • The iFlyTek AINote 2 is among the thinnest E-Ink tablets. It has an EMR stylus, a built-in fingerprint reader, and plenty of built-in AI features. You had me until "and plenty of built-in AI features." That and any company that still does the iProduct naming trope is an immediate pass. It suggests the company isn't very imaginative or creative and is trying to piggyback off another company's success. Extremely lame. Also kind of expensive. Better choices at lower prices out there.
    • These are not "great" prices... just "less awful". Apparently "Those who forget the past are doomed to pay higher prices and think they've won."
    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      487
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!