Serious flaw discovered in Windows Vista's Explorer


Recommended Posts

Instead of admitting that you blew it way out of proportion you choose to call everybody else fanboys? Comon, you could do better than that.

I've edited the original post. As far as the title, I posted this very late last night. Yes, I agree, the title could have been better worded, but the amount of disrespect is uncalled for. This isn't a personal attack on you, or anyone else, this is a general comment to the state of what has transpired. I don't want any more flaming to go on, it's a shame to see this happen on one of Microsoft's featured communities.

At this point, I'd like to ask a moderator to delete this thread.

I've edited the original post. As far as the title, I posted this very late last night. Yes, I agree, the title could have been better worded, but the amount of disrespect is uncalled for. This isn't a personal attack on you, or anyone else, this is a general comment to the state of what has transpired. I don't want any more flaming to go on, it's a shame to see this happen on one of Microsoft's featured communities.

At this point, I'd like to ask a moderator to delete this thread.

Why delete the thread if the information is accurate? Do you just prefer it gone for the flaming you are receiving? I personally don't see the seriousness of the flaw nor understand if using a NOT boolean argument in a search was such a common practice that it wasn't found until now. If explorer.exe terminates unexpectly and immediately reboots it's just like any other explorer.exe crash so where's the big issue? :blink:

Was that a joke? What's the big issue? Kristan is trying to make Windows better. You obviously could not care less for it. "what's the big issue" It is an explorer crash! I mean FFS! Are you going to claim to be part of the Windows Communitiy with a mindset like that? I would think one of the ohhh maybe top 3 resposibilites of a member of the Windows Community/ Windows enthusiast would be trying to make Windows better... It seems with you that you have given up on Windows and say "Hah Windows sucks, it crashes all the time."

As an experienced forum admin I would like to offer the following advice

@iCeFuSiOn....when posting on a forum where the average member age appears to be 14 and the average member iq appears to be 0, be careful how you word your posts.

@email flamers....if you have'nt got the guts to speak out publicly and instead resort to flaming in private, you need to reexamine your values.

It seems that you posted with a sensationalist headline in order to "rouse the community". It sounds like your intention was for Microsoft to receive negative attention - a small price to pay, no doubt, for raising awareness of the issue at hand - and found out the hard way that sensationalism is a double-edged sword.

Its unfortunate that you were the unwitting victim of your own devices here, but I think there was a lesson to learn, and it hasn't been picked up. How could the initial situation have been handled better?

You could very easily have written an objective post detailing the discovery of a bug in the usage of boolean operators which appears to lead to crashes of the shell under certain circumstances. Instead, you chose to flag this as a "serious flaw" and tried to spark off an emotional response in your readers to go yell at Microsoft for being a bunch of lazy *uckups. You've also wiped the original post, and source. Great job with the running away, but not an entirely laudable thing to do.

You could have followed up with more details of Microsoft's alleged irresponsibility in patching bugs commonly experienced by users of pre-SP1, and not addressed in SP1. But you choose not to take time to do that, and instead published with one bug example (which was contradicted by other users of SP1 RC shortly afterwards). Please understand that this weakened your point of how Microsoft will overlook user reported issues (and I agree, they do, and they need to reassess their user experience quality).

Now you've made some mistakes, drew fire on an obviously controversial topic (although you intended Microsoft to receive most of the flak from your article), and still you persist in non-objective responses, trying to arouse sympathy within the community. Well, I can be partially sympathetic, but really, you were the one playing with matches in a field of dry straw, and instead of burning down Neighbor Bill's farm, you burned down your own. But please don't try and erase your mistakes. You've acknowledged that you didn't handle things as well as you could have, and that's a great first step, but don't erase the dialogue that has been generated from all this. You've received childish responses. That's fine. Ignore them. When folks raise valid points, address them, and let them contribute to the dialogue. You're still raising awareness within the community when you're doing this, unlike when you just give up, wipe everything, and run away.

I've edited the original post. As far as the title, I posted this very late last night. Yes, I agree, the title could have been better worded, but the amount of disrespect is uncalled for. This isn't a personal attack on you, or anyone else, this is a general comment to the state of what has transpired. I don't want any more flaming to go on, it's a shame to see this happen on one of Microsoft's featured communities.

At this point, I'd like to ask a moderator to delete this thread.

I didn't see much problems as far as your original post goes, but I have to say I was indeed pretty frustrated that the title led me to believe there's actually a "serious flaw", and by that I (and I presume most people) assumed it was a security flaw.

As far as I could see all the angry posts were directed at your choice of title, not much (if any) were directed at you personally, so I'm not sure what you have to be so sensitive about.

And I'd think that it's not much of an expectation from the general public that these kinds of reports are accurate in both information and magnitude, what's to be surprised about when a gross exaggeration is met with negative attitudes?

It seems that you posted with a sensationalist headline in order to "rouse the community". It sounds like your intention was for Microsoft to receive negative attention - a small price to pay, no doubt, for raising awareness of the issue at hand - and found out the hard way that sensationalism is a double-edged sword.

Its unfortunate that you were the unwitting victim of your own devices here, but I think there was a lesson to learn, and it hasn't been picked up. How could the initial situation have been handled better?

You could very easily have written an objective post detailing the discovery of a bug in the usage of boolean operators which appears to lead to crashes of the shell under certain circumstances. Instead, you chose to flag this as a "serious flaw" and tried to spark off an emotional response in your readers to go yell at Microsoft for being a bunch of lazy *uckups. You've also wiped the original post, and source. Great job with the running away, but not an entirely laudable thing to do.

You could have followed up with more details of Microsoft's alleged irresponsibility in patching bugs commonly experienced by users of pre-SP1, and not addressed in SP1. But you choose not to take time to do that, and instead published with one bug example (which was contradicted by other users of SP1 RC shortly afterwards). Please understand that this weakened your point of how Microsoft will overlook user reported issues (and I agree, they do, and they need to reassess their user experience quality).

Now you've made some mistakes, drew fire on an obviously controversial topic (although you intended Microsoft to receive most of the flak from your article), and still you persist in non-objective responses, trying to arouse sympathy within the community. Well, I can be partially sympathetic, but really, you were the one playing with matches in a field of dry straw, and instead of burning down Neighbor Bill's farm, you burned down your own. But please don't try and erase your mistakes. You've acknowledged that you didn't handle things as well as you could have, and that's a great first step, but don't erase the dialogue that has been generated from all this. You've received childish responses. That's fine. Ignore them. When folks raise valid points, address them, and let them contribute to the dialogue. You're still raising awareness within the community when you're doing this, unlike when you just give up, wipe everything, and run away.

I was going to comment on this affair but this post said everything I wanted to say.

Fanboyism is nothing new, it has been part of the internet for years, and will always continue to be part of the internet. Without making this sound rude, a lot of sceners seem to be falling in on their own egos and believing their own self-hype, and the problem is that if you write sensationalist articles like this, you are bound to draw some criticism from people, that is what the internet is like, and it has to be something you are willing to accept if you are going to blog about these kind of matters. I would also like to point out that including your personal email address in any blog post is also inveterantly stupid, and is really just asking for trouble, because at the end of the day that is what comments are there for.

I value everyone's contributions from the scene, but if people can't take the heat of what they post then I personally have no sympathy for them, it is a simple fact that no matter what your opinion is someone IS gonna flame you for it because the internet is a wide bed of such diverse opinions.

actually serious flaw is $400 off the bank account due to an 'ultimate POS' that is full of flaws/bugs/annoyances and ultimately is obfuscated by its 6 years old predecessor... great pos.... we all should be wow'ed

edit: wow bold

Edited by Jock Horror

This is a fluke on certain people's systems. I've tried it on three different systems, two that don't have SP1 and one that does and it only happened once. I don't see why anyone would be trying to search for everything on their system that isn't a shortcut in the first place.

This thread is going no where and only serves the purpose for those who hate Vista to bash Vista and for those who love Vista to bash those who don't.

thread closed

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AI is the justification that company administrators use to lay people off; it is not the end all, be all touted in the media (many of whom can't tell a microchip from a potato chip). Greed is main driving factor behind its adoption; the other is remaining relevant in the face of competition from other entities.
    • Firefox 152.0.2 is out with fixes for performance, translation, and cloud storage services by Taras Buria A new bug-fixing update is now rolling out to Firefox users in the Release Channel. Less than a week ago, Mozilla fixed crashes on Intel Raptor Lake processors with version 152.0.1. Now, Mozilla has prepared yet another set of fixes that address problems with localization, playback issues of certain MP4 files, and performance issues on website that perform various encryption operations at once. Here is the full changelog: Firefox 152.0.2 is now available for download from Mozilla's FTP. Existing installations will get the update over the next several hours. The latest version will also be available soon on the official website, the Microsoft Store, and Neowin's Software page. You can find Firefox 152.0.2 release notes in the official documentation. In case you missed it, Mozilla released Firefox 152 earlier this month. The latest feature update brought reworked settings with a more streamlined user interface, JPEG XL support, new features for Private mode, a new way to mute a tab (just type "mute" in the address bar), and many more. You can find the complete changelog here. In other Firefox news, Mozilla recently published its roadmap, where the company detailed the upcoming Nova redesign and other features it plans to implement. Mozilla wants to make the new user interface easier to navigate and more modern, with a heavy focus on its privacy tools, such as its built-in VPN. If you are curious, you can already enable the new UI as described here.
    • Liene PixCut S1 Starter Kit gets a whopping 31% discount on Prime Day by Steven Parker Liene reached out to us to share another Prime Day exclusive deal that starts today on Amazon. It gives buyers a massive 31% off on the cost of this color sticker printer and cutting machine. It's basically an all-in-one sticker maker for DIY crafts, custom labels and gifts. It utilizes thermal dye-sublimation at 300 dpi, and offers precise "AI" auto-cutting. Here are some more of its highlights: All-in-One Convenience - Print and Cut in One Step. Say goodbye to the hassle of using separate machines. The PixCut S1 seamlessly integrates high-resolution photo printing and precise die cutting into one streamlined device. With just a few clicks on the user-friendly app, you can edit, print, and cut directly from your smartphone via Bluetooth. Create stickers in just 2 minutes! This all-in-one solution saves you time and effort, making your creative projects more enjoyable and efficient. AI Image Extraction & Precision Cutting - Unleash your creativity with the AI image extraction feature that automatically recognizes and extracts subjects from your photos. Then watch as the high-precision cutting system, guided by the same AI technology, perfectly follows every edge with pinpoint accuracy. This seamless AI-to-cut workflow ensures flawless results every time. Turn any moment into custom stickers with professional edges in minutes - just masterpieces made simple. High-Resolution Prints - Vivid and True-to-Life Colors. Utilizing thermal dye-sublimation technology, the PixCut S1 delivers stunning 300 dpi high-resolution prints with 16.7 million colors. Whether you're printing photos, stickers, or labels, you can expect vibrant, true-to-life color effects that make your creations stand out. Every detail is captured with precision, providing professional-quality results every time. AI Lab - Bring Your Imagination to Life. Upload a photo, pick a style from the Liene Photo App, and watch AI bring your vision to life instantly. Turn selfies into an anime character, a fantasy hero, or a festive holiday illustration — all with stunning realism. One style, endless versions of you. Print your AI art as custom stickers, unique gifts, or social media posts — perfect for avatars and DIY projects. No design experience required. Your creativity is just one click away from magic. Durable Stickers - Create Long-Lasting Creations .Thanks to the four-layer thermal dye-sublimation technology, the photopaper is automatically laminated during printing. Stickers produced by PixCut S1 are durable, waterproof and scratch-resistant, ensuring they remain vibrant and intactover time. Perfect for creating custom stickers, labels, and more that last. No Subscription. Just Pure Creativity. With the Liene app, available on mobile, tablet, and desktop. Unlock 40,000+ free images, fonts & elements (and growing), plus 2000+ ready-to-use templates for phone skins, lens stickers, ID cards, labels, name tags, journaling, and more. No paywalls, no hidden fees, just pure creativity. Turn any idea into a custom creation in minutes. Your imagination has no limits, neither should your software. This deal is for the Starter Kit, so what do you get? What's in the box PixCut S1 Photo Sticker Printer and Cutter x 1 Photo Sticker Cutter Ink Cartridge x 1 (36 sheets) Photo Paper 4"x6" (18 sheets) Sticker Paper 4"x7" (White) x 18 sheets Blade x 1 (Pre-installed) So in short everything you need to get printing and cutting. The Liene PixCut S1 has a 4.3 star rating after more than 1,000 reviews from customers, but we can't promise the landing page always sold this particular model, so do check out the reviews before purchasing. In any case Prime members are covered with a 30 day return or replacement should things not work out so great. Liene Pixcut S1 for $205.99 (was $299.99) 31% off Use code 15PIXCUT6 during checkout Although this is a Prime Day discount, the above code will stay live until June 30. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • https://www.tenforums.com/tuto...b-results-windows-10-a.html Check the comment dates. Some of them are as old as 2016.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      478
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      100
    4. 4
      Michael Scrip
      88
    5. 5
      neufuse
      70
  • Tell a friend

    Love Neowin? Tell a friend!