Question About Lens Storage


Recommended Posts

Still settling into the realm of DSLRs, so here's the situation: I've only got one lens for the moment; the kit lens that came with my EOS 350D. Now, the question (to which I don't really know if there's a definitive answer), is whether it's a bad idea to keep the lens attached to the camera for a period of a week or two, wherein I won't be using the camera whatsoever. Should I remove the lens and cap both the lens and body, or is it really not a big deal (and its just me making something of nothing here)?

Link to comment
https://www.neowin.net/forum/topic/611774-question-about-lens-storage/
Share on other sites

You're making something of nothing. Either way is fine. I'd just leave the lens on. Saves on unnecessary wear, and even then SLRs are made to switch lens constantly so that isn't much of an issue either. If you do decide to take the lens of, do be sure to cap it and the camera. Dust is your enemy. =)

Now here's an actual useful tip. Store your camera (lens or no lens) facing downwards. This helps to cause whatever dust may have gotten in there, to settle away from the censor as much as possible. It won't guarantee a dust-free censor, but it will help.

as stated by TTamNedlog, there is no damage from leaving your lens attached, and in fact, proves beneficial because you won't get dust in your body from taking the lens on and off all the time. While storing it upside down doesn't do much good if the lens is attached, changing your lenses by holding the camera lens-down will help keep dust out when changing lenses during shooting. I'd still advise getting a sensor cleaning kit however.

If you take a lens off the camera, put another lens on, or the body cap right away, or dust will settle. That said, I've had my D50 for almost two years (not exactly sure when I got it anymore) and have never NOT had a lens on it
People normally leave a lens on methinks. Anyways, everyone I've seen has, and so have I.

+1 Never have it without a lense, to much of a hassle and it's prevents dust getting in as others have said.

Yeah, just wanna agree on what everyone else has said: leave the lens on. It's not like AA batteries where if you leave the thing inside it could melt and OMG MY CAMERA MELTED!

Furthermore, avoid changing or taking off the lens; not because you might wear out the lens thread, but because dust is everywhere whether we like it or not.

Yeah, just wanna agree on what everyone else has said: leave the lens on. It's not like AA batteries where if you leave the thing inside it could melt and OMG MY CAMERA MELTED!

Furthermore, avoid changing or taking off the lens; not because you might wear out the lens thread, but because dust is everywhere whether we like it or not.

No modern lens system is a screw mount. All of them are bayonet mounts. Theres no thread to wear out.

  • 3 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • About bloody time. I have got PRs with hundred of files and the Web UI just struggling to even load the pages.
    • I wonder if it was applying secure boot certificates/dbx files?
    • I recently tried edge. It seems a lot better. A lot of the junk in it is gone. It seems less bloated and snappy.
    • Lethal fake phone chargers are still being sold on Amazon and eBay, UK watchdog warns by Paul Hill Credit: Pexels The UK consumer rights organization, Which?, is claiming that “potentially lethal knock-off chargers” are still being sold on online marketplaces seven years after it exposed the danger of these chargers. In its latest investigation, it bought 15 USB phone chargers from several online marketplaces and found they were missing key information, meaning they cannot be legally sold in the UK. Which? bought the 15 chargers from seven online marketplaces. These were Amazon (including Amazon Haul), AliExpress, B&Q Marketplace, Debenhams Marketplace, and eBay. It said that the chargers were so badly made that anyone using them was at risk of electric shock. Over half the chargers also posed fire and explosion risks. Of the chargers purchased, one was a fake Apple USB-C 35W power adaptor charger. To confuse buyers, the box was branded with an Apple logo, but testing found it to be a fake. Further testing picked up arcing sounds after 10 seconds of use, where a current jumps between two parts of the electrical circuit, which can cause fires, explosions, or electric shock. The manufacturers of this particular charger also put modeling clay inside it to make it feel more weighty, robust, and genuine. Not all of the chargers were technically faulty; however, some were missing key packaging, markings, and documentation, meaning they can’t be sold in the UK legally. Which? said that it is now campaigning alongside a coalition of safety groups and businesses for new laws that make online marketplaces responsible for ensuring the safety of products that they choose to list on their websites. It also said the government needs to start using powers under the Product Regulation and Metrology Act, which was adopted last July, to impose safety requirements on online marketplaces via secondary legislation, but so far, there have been delays. No matter what country you are in, be sure to properly research what you are buying and only buy authentic chargers to prevent fires. You can read more about Which?’s research here.
    • Visual Studio finally gets long-awaited feature that developers will love by Usama Jawad Visual Studio Code is Microsoft's popular, lightweight, open-source code editor, it is actually Visual Studio that is the company's flagship integrated development environment (IDE). Although the IDE already offers a boatload of useful features for developers, Microsoft has finally introduced a long-requested capability that will be loved by many. While developers have already been able to create Git pull requests (PRs) directly within Visual Studio for the past couple of years, it had not been possible to review a PR without switching to the browser, until now. Microsoft revealed in December 2025 that it is working on UX that enables developers to do just that, and fast-forward to June 2026, and Visual Studio finally has native capabilities to open and inspect a PR, discuss feedback, and wrap up the review, all without switching to the browser. This integration works for both GitHub and Azure DevOps (including on-prem). Developers have access to multiple surfaces to open a PR, including Git Repository, Git Changes, and the Git menu in Visual Studio. Once you open a PR, all the important details will be immediately visible to you, from where you can navigate to various levels of granularity and branch states, depending on the reviews that you are engaged in. As you would expect, you also get a diff view that enables you to see code changes inline or side-by-side in a separate panel. You can also review commit-by-commit. Additionally, this UX fosters collaboration as you can leave comments, reply to threads, and resolve conversations easily. Naturally, you can also leverage Copilot to apply a code suggestion to fix a potential issue. When you are done, you have the ability to approve, complete, and merge the PR. This is a pretty major feature as it has been requested heavily for the past few years. You can try it out in Visual Studio 2026 version 18.7, made available here recently. Microsoft plans to enhance this experience further in future releases with comment filtering, a timeline of PR activity, and more.
  • Recent Achievements

    • Week One Done
      Timaximus earned a badge
      Week One Done
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
    • Week One Done
      davidbazooked earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      PsYcHoKiLLa
      174
    3. 3
      +Edouard
      160
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!