• 0

Definitive Best Defragmenter 2008


Definitive Best Defragmenter  

866 members have voted

  1. 1. Your choice?

    • Auslogics
      54
    • DirMS/Buzzsaw
      1
    • Diskeeper
      184
    • JKDefrag
      101
    • Norton Speed Disk
      5
    • O&O Defrag
      119
    • PageDefrag
      1
    • PerfectDisk
      224
    • Vopt
      5
    • Windows Defrag
      97
    • Other (please specify below)
      75


Question

Recommended Posts

  • 0

Diskeeper for me. All other defragmenters have below par intelligent, automatic background defrgmentation. PerfectDisk comes close, but it isn't efficient in the sense, it uses too much resources over too little time, thus making performance dips quite obvious. With Diskeeper, you won't notice a preformance drop while a defrag is going on, even on very low end PCs. (I've been running Diskeeper for years on my old 450 Mhz box quite comfortably)

Sure, if you do a manual run, you may find PerfectDisk / O&O / UltimateDefrag to be better, but Diskeeper isn't designed to be run manually.

All those benchmarks that are available at present only tests the defragmenters for a single or atmost two sessions or runs. Those tests only show which defragmenter works the best on manual defrags.

Automatic, background defragmentation tests should be conducted over a period of time, like a week or a month; only then can we know which automatic defragmenter is the most efficient. Note that the keyword here is efficient - meaning delivering maximum performance while using the least amount of resources.

Although, fragmentation is highly overrated these days. With large harddrives becoming cheaper and large media files occupying the maximum space, fragmentation isn't much of a problem once your system is well setup. Again, this is highly subject to your enviromnent and your requirements. Database servers might benefit from Diskeeper w.r.t the performance aspect, but home users might find Diskeeper to be overpriced for their general needs.

Personally, I use UltimateDefrag immediately after a fresh format+install. I manually edit the layout.ini to add ntldr, boot.ini and ntdetect.com at the top of the list. (Why doesn't windows add it in the first place?!) Then I go on about adding files that I don't use frequently to the bottom of the drive (driver.cab, sp2.cab, help files, dllcache, and so on), while I move programs that autostart with windows to the top of the drive. Sometimes, I take the assistance of bootvis to figure out the program loading sequence.

Once the manual drive layout optimization is done UltimateDefrag finishes all tasks, I quit it for good and enable Diskeeper. And that's the last time I'll be opening a defragmenter again, untill the next format cycle comes along :)

My personal advice to all readers: Please don't go blindly by the results of this poll. First, asses your situation and decide whether you would *really* benefit from a dedicated third-party defragmenter. Vista users have their work cut out thanks to the builtin automatic defragmenter, but first asses whether it's working well for *you*. Check your fragmentation levels. Are they low on an average or tend to shoot up every time you install something? Do the drives you use frequently have more than sufficient free space? (If so, fragmentation won't be a problem for you.) Fragmentation of audio/video files isn't a big deal since they're always read (played) at a constant speed. 3 or 4 fragments of a 700 MB movie file wont affect your playback experience. Unless of course, you have some other files, like programs installed in the same partition. Then again, it's never a good idea to keep your programs and media on the same partition, for the above and many other reasons. If program loading time is your main concern, then invest in a good flash drive and make use of ReadyBoost. (eBoostr, for Windows XP users.) If low startup time is what you seek, then disable unnecessary startup programs/services and make use of the Sleep / Hibernate features.

Defragmenters can only take you a certain distance in the journey to optimizing your computer.

Don't just jump to conclusions based on some xyz benchmark or personal opinions. Decide for yourself what would suit your scenario the best. On that note, I'd like to say that there is no such thing as a "Definitive Best Defragmenter", just as there is no "Definitive Best Car".

Edited by [deXter]
  • 0

Normally I would choose PerfectDisk but I chose "Other" this year. I'll explain, even though it won't quite make sense...

PerfectDisk from a safety and reliability standpoint has been the best defragger I've ever used, bar-none. Everything I do with it is a cake-walk and the interface is great. BUT, I don't notice performance gains that are that significant.

People tend to look for that defragger that makes things feel faster. That's where my "Other" choice comes in: Ultimate Defrag from DiskTrix

Now, let me be the first to say that I didn't go through all the normal BS with making an image, running PD, then measuring performance, reimaging, running UD, measuring performance, etc. So basically people who are looking for that proof can just stop reading because I have no real benchmarks to measure anything. I'm being honest here...

BUT, from a performance standpoint, I can feel the system respond faster. Things open quicker, WoW loads much faster, programs open quicker. With PD I don't feel like it's any quicker, but with UD I do notice it, and that's what attracts me to the app. It's small, very very fast and defrags and gives me a nice performance boost.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • If someone chooses to continue using SB and therefore goes through the manual intervention in the thread, afterwards the BSOD problem is gone. Whether they then re-enable the task doesn't matter, they're done, though on such machines it might pay to keep it disabled in case the next update (if there is a next) causes the same problem. OTOH, if someone disables SB in the BIOS, the problem is also gone. Incidentally, I noticed that this task exists even on machines that don't support SB. It's just installed across the board...and runs. Doing what on such machines is a little hazy.
    • qBittorrent 5.2.2 by Razvan Serea The qBittorrent project aims to provide a Free Software alternative to µtorrent. qBittorrent is an advanced and multi-platform BitTorrent client with a nice user interface as well as a Web UI for remote control and an integrated search engine. qBittorrent aims to meet the needs of most users while using as little CPU and memory as possible. qBittorrent is a truly Open Source project, and as such, anyone can and should contribute to it. qBittorrent features: Polished µTorrent-like User Interface Well-integrated and extensible Search Engine Simultaneous search in most famous BitTorrent search sites Per-category-specific search requests (e.g. Books, Music, Movies) All Bittorrent extensions DHT, Peer Exchange, Full encryption, Magnet/BitComet URIs, ... Remote control through a Web user interface Nearly identical to the regular UI, all in Ajax Advanced control over trackers, peers and torrents Torrents queueing and prioritizing Torrent content selection and prioritizing UPnP / NAT-PMP port forwarding support Available in ~25 languages (Unicode support) Torrent creation tool Advanced RSS support with download filters (inc. regex) Bandwidth scheduler IP Filtering (eMule and PeerGuardian compatible) IPv6 compliant Available on most platforms: Linux, Mac OS X, Windows, OS/2, FreeBSD qBittorrent 5.2.2 changelog: FEATURE: Use D-Bus to show file in file managers (Chocobo1) #24340 BUGFIX: Fix friendlyUnitCompact precision calculation (vafada) #24323 BUGFIX: Remove all top-level folders (glassez) #24333 BUGFIX: Use proper API for checking exit status (Chocobo1) #24349 BUGFIX: Delete stale lockfile when hostname mismatch (TurboTheTurtle, glassez) #24363 BUGFIX: Fix wrong removal procedure of watched folder paths (Chocobo1) #24413 BUGFIX: Don't reannounce before interface changes are applied (glassez) #24447 BUGFIX: Use Latin script for Bosnian locale name (Andy Ye) #24342 WEBUI: Fix performance of global checkbox toggling (tehcneko) #24316 WEBUI: Fix Safari transfer list header misalignment (Piccirello) #24377 WEBUI: Fix error when submitting magnet before metadata loads (Piccirello) #24378 WEBUI: Use correct row id when updating Rss Downloader feed selection (Chocobo1) #24402 WEBUI: Use SameSite=Lax for session cookie to fix cross-site login (Piccirello) #24422 WEBUI: Bring back properties panel expand/collapse button (vafada) #24430 WEBAPI: Only use X-Forwarded-Host header when reverse proxy support is enabled (Chocobo1) #24457 RSSS: Fix "RSS Smart Episode Filter" RegEx (nathanon-akk, glassez) #24398 RSS: Fix previously matched episode format (glassez) #24452 WINDOWS: Fix Python fallback search path (TurboTheTurtle) #24325 WINDOWS: NSIS: Allow to install x64 binary on ARM64 (Chocobo1) #24358 Download: qBittorrent 5.2.2 | 41.1 MB (Open Source) Download: qBittorrent 64-bit installer (qt6) | 43.6 MB Links: qBittorrent Home page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Weechat. https://weechat.org/
    • they should stop making bad games that no one asked for
  • Recent Achievements

    • Veteran
      branfont went up a rank
      Veteran
    • Reacting Well
      Almohandis earned a badge
      Reacting Well
    • First Post
      Cosminus earned a badge
      First Post
    • One Year In
      ThatGuyOnline earned a badge
      One Year In
    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      483
    2. 2
      +Edouard
      183
    3. 3
      PsYcHoKiLLa
      123
    4. 4
      Steven P.
      87
    5. 5
      neufuse
      72
  • Tell a friend

    Love Neowin? Tell a friend!