• 0

Definitive Best Defragmenter 2008


Definitive Best Defragmenter  

866 members have voted

  1. 1. Your choice?

    • Auslogics
      54
    • DirMS/Buzzsaw
      1
    • Diskeeper
      184
    • JKDefrag
      101
    • Norton Speed Disk
      5
    • O&O Defrag
      119
    • PageDefrag
      1
    • PerfectDisk
      224
    • Vopt
      5
    • Windows Defrag
      97
    • Other (please specify below)
      75


Question

Recommended Posts

  • 0

Diskeeper for me. All other defragmenters have below par intelligent, automatic background defrgmentation. PerfectDisk comes close, but it isn't efficient in the sense, it uses too much resources over too little time, thus making performance dips quite obvious. With Diskeeper, you won't notice a preformance drop while a defrag is going on, even on very low end PCs. (I've been running Diskeeper for years on my old 450 Mhz box quite comfortably)

Sure, if you do a manual run, you may find PerfectDisk / O&O / UltimateDefrag to be better, but Diskeeper isn't designed to be run manually.

All those benchmarks that are available at present only tests the defragmenters for a single or atmost two sessions or runs. Those tests only show which defragmenter works the best on manual defrags.

Automatic, background defragmentation tests should be conducted over a period of time, like a week or a month; only then can we know which automatic defragmenter is the most efficient. Note that the keyword here is efficient - meaning delivering maximum performance while using the least amount of resources.

Although, fragmentation is highly overrated these days. With large harddrives becoming cheaper and large media files occupying the maximum space, fragmentation isn't much of a problem once your system is well setup. Again, this is highly subject to your enviromnent and your requirements. Database servers might benefit from Diskeeper w.r.t the performance aspect, but home users might find Diskeeper to be overpriced for their general needs.

Personally, I use UltimateDefrag immediately after a fresh format+install. I manually edit the layout.ini to add ntldr, boot.ini and ntdetect.com at the top of the list. (Why doesn't windows add it in the first place?!) Then I go on about adding files that I don't use frequently to the bottom of the drive (driver.cab, sp2.cab, help files, dllcache, and so on), while I move programs that autostart with windows to the top of the drive. Sometimes, I take the assistance of bootvis to figure out the program loading sequence.

Once the manual drive layout optimization is done UltimateDefrag finishes all tasks, I quit it for good and enable Diskeeper. And that's the last time I'll be opening a defragmenter again, untill the next format cycle comes along :)

My personal advice to all readers: Please don't go blindly by the results of this poll. First, assess your situation and decide whether you would *really* benefit from a dedicated third-party defragmenter. Vista users have their work cut out thanks to the builtin automatic defragmenter, but first assess whether it's working well for *you*. Check your fragmentation levels. Are they low on an average or tend to shoot up every time you install something? Do the drives you use frequently have more than sufficient free space? (If so, fragmentation won't be a problem for you.) Fragmentation of audio/video files isn't a big deal since they're always read (played) at a constant speed. 3 or 4 fragments of a 700 MB movie file wont affect your playback experience. Unless of course, you have some other files, like programs installed in the same partition. Then again, it's never a good idea to keep your programs and media on the same partition, for the above and many other reasons. If program loading time is your main concern, then invest in a good flash drive and make use of ReadyBoost. (eBoostr, for Windows XP users.) If low startup time is what you seek, then disable unnecessary startup programs/services and make use of the Sleep / Hibernate features.

Defragmenters can only take you a certain distance in the journey to optimizing your computer.

Don't just jump to conclusions based on some xyz benchmark or personal opinions. Decide for yourself what would suit your scenario the best. On that note, I'd like to say that there is no such thing as a "Definitive Best Defragmenter", just as there is no "Definitive Best Car".

Great post, there is a lot of solid information in there that a lot people don't even consider nowadays.

I also fixed your post (in bold) that kept me laughing as well. :D

I use the normal Windows XP defragmenter.

  • 0

Diskeeper for me. All other defragmenters have below par intelligent, automatic background defrgmentation. PerfectDisk comes close, but it isn't efficient in the sense, it uses too much resources over too little time, thus making performance dips quite obvious. With Diskeeper, you won't notice a preformance drop while a defrag is going on, even on very low end PCs. (I've been running Diskeeper for years on my old 450 Mhz box quite comfortably)

Sure, if you do a manual run, you may find PerfectDisk / O&O / UltimateDefrag to be better, but Diskeeper isn't designed to be run manually.

All those benchmarks that are available at present only tests the defragmenters for a single or atmost two sessions or runs. Those tests only show which defragmenter works the best on manual defrags.

Automatic, background defragmentation tests should be conducted over a period of time, like a week or a month; only then can we know which automatic defragmenter is the most efficient. Note that the keyword here is efficient - meaning delivering maximum performance while using the least amount of resources.

Although, fragmentation is highly overrated these days. With large harddrives becoming cheaper and large media files occupying the maximum space, fragmentation isn't much of a problem once your system is well setup. Again, this is highly subject to your enviromnent and your requirements. Database servers might benefit from Diskeeper w.r.t the performance aspect, but home users might find Diskeeper to be overpriced for their general needs.

Personally, I use UltimateDefrag immediately after a fresh format+install. I manually edit the layout.ini to add ntldr, boot.ini and ntdetect.com at the top of the list. (Why doesn't windows add it in the first place?!) Then I go on about adding files that I don't use frequently to the bottom of the drive (driver.cab, sp2.cab, help files, dllcache, and so on), while I move programs that autostart with windows to the top of the drive. Sometimes, I take the assistance of bootvis to figure out the program loading sequence.

Once the manual drive layout optimization is done UltimateDefrag finishes all tasks, I quit it for good and enable Diskeeper. And that's the last time I'll be opening a defragmenter again, untill the next format cycle comes along :)

My personal advice to all readers: Please don't go blindly by the results of this poll. First, asses your situation and decide whether you would *really* benefit from a dedicated third-party defragmenter. Vista users have their work cut out thanks to the builtin automatic defragmenter, but first asses whether it's working well for *you*. Check your fragmentation levels. Are they low on an average or tend to shoot up every time you install something? Do the drives you use frequently have more than sufficient free space? (If so, fragmentation won't be a problem for you.) Fragmentation of audio/video files isn't a big deal since they're always read (played) at a constant speed. 3 or 4 fragments of a 700 MB movie file wont affect your playback experience. Unless of course, you have some other files, like programs installed in the same partition. Then again, it's never a good idea to keep your programs and media on the same partition, for the above and many other reasons. If program loading time is your main concern, then invest in a good flash drive and make use of ReadyBoost. (eBoostr, for Windows XP users.) If low startup time is what you seek, then disable unnecessary startup programs/services and make use of the Sleep / Hibernate features.

Defragmenters can only take you a certain distance in the journey to optimizing your computer.

Don't just jump to conclusions based on some xyz benchmark or personal opinions. Decide for yourself what would suit your scenario the best. On that note, I'd like to say that there is no such thing as a "Definitive Best Defragmenter", just as there is no "Definitive Best Car".

Well said. I use Diskeeper, I have been for 6 months and it works outstanding.

  • 0

JKDefrag

i add / delete / move around a ton of large files all day long (no not pirated movies :p ) JK being 64-bit helps the speed quite a bit when defraging

and when i use it on my C: i notice huge increases in speed when windows boots and logs on

as well it has lots of different types of defraging and options of what and how to defrag stuff

  • 0

Tried several of the free variants and most were adequate but I found none of them really made much difference but then I tried PerfectDisk 8 and wow!......boot up time and the general responsiveness of my XP machine improved dramatically. Great product and would recommend anyone try the 30 day free trial to see if they notice the difference too. Good to hear version 9 will be here soon too. :)

  • 0

Diskeeper for me. All other defragmenters have below par intelligent, automatic background defrgmentation. PerfectDisk comes close, but it isn't efficient in the sense, it uses too much resources over too little time, thus making performance dips quite obvious. With Diskeeper, you won't notice a preformance drop while a defrag is going on, even on very low end PCs. (I've been running Diskeeper for years on my old 450 Mhz box quite comfortably)

That why I use it. Its just excellent in this regard.

  • 0

The first time I used JKDefrag I thought to myself why would anyone make something with a UI that bad? A year later I tried JKDefrag again and just amaze with the program. Now all my computers are defrag using this program. It's best to run in Safe Mode; in this situation the computer can't be used for anything so there is no point to even sit there and look at the UI to see how ugly it's. The program is simple to use, light, does what it suppose to do without doing anything extra. Definitely one of the best freeware and must have program out there.

  • 0

Voted for Perfectdisk 8... waiting impatiently for 9 to see the changes.

Two weeks ago, I ran a manual defrag with PerfectDisk 8. I had about 56 fragments left, I started up Diskeeper right after and turned on auto-defrag, and fragshield. Currently, Diskeeper 2008 is still running, but I've checked on a daily basis with Diskeeper that the amount of fragments on my computer's still going up. I have almost 2000 fragments... which I suppose is ok... but slightly disappointed that it wasn't able to deter fragments on my computer. Also, the constant "defrag" on my harddrive is slightly annoying, it constantly read/writes to my harddrive so my harddrive constantly makes noise. I will continue to use Diskeeper until my trial is over, then I will make a final decision whether I want PD9 or DK.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • BrowserOS 0.46.0 by Razvan Serea BrowserOS is a free, open-source Chromium-based browser that runs AI agents natively, offering a smarter, more productive browsing experience. It supports Chrome extensions and integrates AI agents to automate tasks, fill forms, and streamline workflows. Your data stays on your computer: you can use your own API keys or run local models via Ollama, making it a privacy-first alternative to tools like Perplexity, Comet, or Dia. With built-in productivity tools and app integrations, BrowserOS boosts efficiency while keeping control firmly in your hands. Being Chromium-based, BrowserOS lets you effortlessly import your bookmarks, passwords, and Chrome extensions in just a few clicks. BrowserOS works with OpenAI GPT models, Anthropic Claude, Google Gemini, and local AI models via Ollama or LMStudio. You can use your own API keys and effortlessly switch between providers. BrowserOS Agent Your AI productivity assistant that organizes and manages your browsing effortlessly Quickly list, group, or close tabs Save and resume browsing sessions Search your history and organize bookmarks Switch instantly to the tab you need BrowserOS Navigator – Automate web tasks with ease Navigate websites and search automatically Interact with pages without manual effort Handle repetitive tasks in seconds What makes BrowserOS special Feels like home - same familiar interface as Google Chrome, works with all your extensions AI agents that run on YOUR browser, not in the cloud Privacy first - bring your own keys or use local models with Ollama. Your browsing history stays on your computer Open source and community driven - see exactly what's happening under the hood MCP store to one-click install popular MCPs and use them directly in the browser bar (coming soon) Built-in AI ad blocker that works across more scenarios! BrowserOS 0.46.0 changelog: Run Claude Code & Codex right in your browser — We've extended the agent harness to bring full coding agents into BrowserOS. Claude Code and Codex now come bundled and plug straight into the assistant, so you can drive your browser with the agent — and the subscription — you already use. A brand new experience — A redesigned new tab, a calmer composer, and a rebuilt command center for switching between agents. The whole assistant is cleaner, faster to reach, and easier to live in. New MCP tools — We rebuilt the browser tool surface from the ground up — a tighter, more reliable set of tools for agents to drive the browser. Plus one-click install of BrowserOS as an MCP server into the agents you already run, with automatic URL sync. Chromium 148 — Updated to the latest Chromium base with all recent upstream fixes and security patches. Streamlined — We've pulled back a few features that weren't getting much use — Skills, Soul, and Memory — so we can focus and ship better versions of them soon. Download: BrowserOS 0.46.0 | 181.0 MB (Open Source) Download: BrowserOS for macOS | 485.0 MB Links: BrowserOS Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      590
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!