• 0

Definitive Best Defragmenter 2008


Definitive Best Defragmenter  

866 members have voted

  1. 1. Your choice?

    • Auslogics
      54
    • DirMS/Buzzsaw
      1
    • Diskeeper
      184
    • JKDefrag
      101
    • Norton Speed Disk
      5
    • O&O Defrag
      119
    • PageDefrag
      1
    • PerfectDisk
      224
    • Vopt
      5
    • Windows Defrag
      97
    • Other (please specify below)
      75


Question

Recommended Posts

  • 0

Diskeeper for me. All other defragmenters have below par intelligent, automatic background defrgmentation. PerfectDisk comes close, but it isn't efficient in the sense, it uses too much resources over too little time, thus making performance dips quite obvious. With Diskeeper, you won't notice a preformance drop while a defrag is going on, even on very low end PCs. (I've been running Diskeeper for years on my old 450 Mhz box quite comfortably)

Sure, if you do a manual run, you may find PerfectDisk / O&O / UltimateDefrag to be better, but Diskeeper isn't designed to be run manually.

All those benchmarks that are available at present only tests the defragmenters for a single or atmost two sessions or runs. Those tests only show which defragmenter works the best on manual defrags.

Automatic, background defragmentation tests should be conducted over a period of time, like a week or a month; only then can we know which automatic defragmenter is the most efficient. Note that the keyword here is efficient - meaning delivering maximum performance while using the least amount of resources.

Although, fragmentation is highly overrated these days. With large harddrives becoming cheaper and large media files occupying the maximum space, fragmentation isn't much of a problem once your system is well setup. Again, this is highly subject to your enviromnent and your requirements. Database servers might benefit from Diskeeper w.r.t the performance aspect, but home users might find Diskeeper to be overpriced for their general needs.

Personally, I use UltimateDefrag immediately after a fresh format+install. I manually edit the layout.ini to add ntldr, boot.ini and ntdetect.com at the top of the list. (Why doesn't windows add it in the first place?!) Then I go on about adding files that I don't use frequently to the bottom of the drive (driver.cab, sp2.cab, help files, dllcache, and so on), while I move programs that autostart with windows to the top of the drive. Sometimes, I take the assistance of bootvis to figure out the program loading sequence.

Once the manual drive layout optimization is done UltimateDefrag finishes all tasks, I quit it for good and enable Diskeeper. And that's the last time I'll be opening a defragmenter again, untill the next format cycle comes along :)

My personal advice to all readers: Please don't go blindly by the results of this poll. First, assess your situation and decide whether you would *really* benefit from a dedicated third-party defragmenter. Vista users have their work cut out thanks to the builtin automatic defragmenter, but first assess whether it's working well for *you*. Check your fragmentation levels. Are they low on an average or tend to shoot up every time you install something? Do the drives you use frequently have more than sufficient free space? (If so, fragmentation won't be a problem for you.) Fragmentation of audio/video files isn't a big deal since they're always read (played) at a constant speed. 3 or 4 fragments of a 700 MB movie file wont affect your playback experience. Unless of course, you have some other files, like programs installed in the same partition. Then again, it's never a good idea to keep your programs and media on the same partition, for the above and many other reasons. If program loading time is your main concern, then invest in a good flash drive and make use of ReadyBoost. (eBoostr, for Windows XP users.) If low startup time is what you seek, then disable unnecessary startup programs/services and make use of the Sleep / Hibernate features.

Defragmenters can only take you a certain distance in the journey to optimizing your computer.

Don't just jump to conclusions based on some xyz benchmark or personal opinions. Decide for yourself what would suit your scenario the best. On that note, I'd like to say that there is no such thing as a "Definitive Best Defragmenter", just as there is no "Definitive Best Car".

Great post, there is a lot of solid information in there that a lot people don't even consider nowadays.

I also fixed your post (in bold) that kept me laughing as well. :D

I use the normal Windows XP defragmenter.

  • 0

Diskeeper for me. All other defragmenters have below par intelligent, automatic background defrgmentation. PerfectDisk comes close, but it isn't efficient in the sense, it uses too much resources over too little time, thus making performance dips quite obvious. With Diskeeper, you won't notice a preformance drop while a defrag is going on, even on very low end PCs. (I've been running Diskeeper for years on my old 450 Mhz box quite comfortably)

Sure, if you do a manual run, you may find PerfectDisk / O&O / UltimateDefrag to be better, but Diskeeper isn't designed to be run manually.

All those benchmarks that are available at present only tests the defragmenters for a single or atmost two sessions or runs. Those tests only show which defragmenter works the best on manual defrags.

Automatic, background defragmentation tests should be conducted over a period of time, like a week or a month; only then can we know which automatic defragmenter is the most efficient. Note that the keyword here is efficient - meaning delivering maximum performance while using the least amount of resources.

Although, fragmentation is highly overrated these days. With large harddrives becoming cheaper and large media files occupying the maximum space, fragmentation isn't much of a problem once your system is well setup. Again, this is highly subject to your enviromnent and your requirements. Database servers might benefit from Diskeeper w.r.t the performance aspect, but home users might find Diskeeper to be overpriced for their general needs.

Personally, I use UltimateDefrag immediately after a fresh format+install. I manually edit the layout.ini to add ntldr, boot.ini and ntdetect.com at the top of the list. (Why doesn't windows add it in the first place?!) Then I go on about adding files that I don't use frequently to the bottom of the drive (driver.cab, sp2.cab, help files, dllcache, and so on), while I move programs that autostart with windows to the top of the drive. Sometimes, I take the assistance of bootvis to figure out the program loading sequence.

Once the manual drive layout optimization is done UltimateDefrag finishes all tasks, I quit it for good and enable Diskeeper. And that's the last time I'll be opening a defragmenter again, untill the next format cycle comes along :)

My personal advice to all readers: Please don't go blindly by the results of this poll. First, asses your situation and decide whether you would *really* benefit from a dedicated third-party defragmenter. Vista users have their work cut out thanks to the builtin automatic defragmenter, but first asses whether it's working well for *you*. Check your fragmentation levels. Are they low on an average or tend to shoot up every time you install something? Do the drives you use frequently have more than sufficient free space? (If so, fragmentation won't be a problem for you.) Fragmentation of audio/video files isn't a big deal since they're always read (played) at a constant speed. 3 or 4 fragments of a 700 MB movie file wont affect your playback experience. Unless of course, you have some other files, like programs installed in the same partition. Then again, it's never a good idea to keep your programs and media on the same partition, for the above and many other reasons. If program loading time is your main concern, then invest in a good flash drive and make use of ReadyBoost. (eBoostr, for Windows XP users.) If low startup time is what you seek, then disable unnecessary startup programs/services and make use of the Sleep / Hibernate features.

Defragmenters can only take you a certain distance in the journey to optimizing your computer.

Don't just jump to conclusions based on some xyz benchmark or personal opinions. Decide for yourself what would suit your scenario the best. On that note, I'd like to say that there is no such thing as a "Definitive Best Defragmenter", just as there is no "Definitive Best Car".

Well said. I use Diskeeper, I have been for 6 months and it works outstanding.

  • 0

JKDefrag

i add / delete / move around a ton of large files all day long (no not pirated movies :p ) JK being 64-bit helps the speed quite a bit when defraging

and when i use it on my C: i notice huge increases in speed when windows boots and logs on

as well it has lots of different types of defraging and options of what and how to defrag stuff

  • 0

Tried several of the free variants and most were adequate but I found none of them really made much difference but then I tried PerfectDisk 8 and wow!......boot up time and the general responsiveness of my XP machine improved dramatically. Great product and would recommend anyone try the 30 day free trial to see if they notice the difference too. Good to hear version 9 will be here soon too. :)

  • 0

Diskeeper for me. All other defragmenters have below par intelligent, automatic background defrgmentation. PerfectDisk comes close, but it isn't efficient in the sense, it uses too much resources over too little time, thus making performance dips quite obvious. With Diskeeper, you won't notice a preformance drop while a defrag is going on, even on very low end PCs. (I've been running Diskeeper for years on my old 450 Mhz box quite comfortably)

That why I use it. Its just excellent in this regard.

  • 0

The first time I used JKDefrag I thought to myself why would anyone make something with a UI that bad? A year later I tried JKDefrag again and just amaze with the program. Now all my computers are defrag using this program. It's best to run in Safe Mode; in this situation the computer can't be used for anything so there is no point to even sit there and look at the UI to see how ugly it's. The program is simple to use, light, does what it suppose to do without doing anything extra. Definitely one of the best freeware and must have program out there.

  • 0

Voted for Perfectdisk 8... waiting impatiently for 9 to see the changes.

Two weeks ago, I ran a manual defrag with PerfectDisk 8. I had about 56 fragments left, I started up Diskeeper right after and turned on auto-defrag, and fragshield. Currently, Diskeeper 2008 is still running, but I've checked on a daily basis with Diskeeper that the amount of fragments on my computer's still going up. I have almost 2000 fragments... which I suppose is ok... but slightly disappointed that it wasn't able to deter fragments on my computer. Also, the constant "defrag" on my harddrive is slightly annoying, it constantly read/writes to my harddrive so my harddrive constantly makes noise. I will continue to use Diskeeper until my trial is over, then I will make a final decision whether I want PD9 or DK.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • BleachBit 6.0.1 Beta by Razvan Serea When your computer is getting full, BleachBit quickly frees disk space. When your information is only your business, BleachBit guards your privacy. With BleachBit you can free cache, delete cookies, clear Internet history, shred temporary files, delete logs, and discard junk you didn't know was there. Designed for Linux and Windows systems, it wipes clean thousands of applications including Firefox, Microsoft Edge, Google Chrome, Opera, Safari, and more. Beyond simply deleting files, BleachBit includes advanced features such as shredding files to prevent recovery, wiping free disk space to hide traces of files deleted by other applications, and vacuuming Firefox to make it faster. Better than free, BleachBit is open source. BleachBit has many useful features: Delete your private files so completely that "even God can't read them" according to South Carolina Representative Trey Gowdy. Simple operation: read the descriptions, check the boxes you want, click preview, and click delete. Multi-platform: Linux and Windows Free of charge and no money trail Free to share, learn, and modify (open source) No adware, spyware, malware, browser toolbars, or "value-added software" Translated to 64 languages besides American English Shred files to hide their contents and prevent data recovery Shred any file (such as a spreadsheet on your desktop) Overwrite free disk space to hide previously deleted files Portable app for Windows: run without installation Command line interface for scripting and automation CleanerML allows anyone to write a new cleaner using XML Automatically import and update winapp2.ini cleaner files (a separate download) giving Windows users access to 2500+ additional cleaners Frequent software updates with new features Going beyond standard deletion of files, BleachBit has several advanced cleaners: Clear the memory and swap on Linux Delete broken shortcuts on Linux Delete the Firefox URL history without deleting the whole file—with optional shredding Delete Linux localizations: delete languages you don't use. More powerful than localepurge and available on more Linux distributions. Clean APT for Debian, Ubuntu, Kubuntu, Xubuntu, and Linux Mint Find widely-scattered junk such as Thumbs.db and .DS_Store files. Execute yum clean for CentOS, Fedora, and Red Hat to remove cached package data Delete Windows registry keys—often where MRU (most recently used) lists are stored Delete the OpenOffice.org recent documents list without deleting the whole Common.xcu file Overwrite free disk space to hide previously files Vacuum Firefox, Google Chrome, Liferea, Thunderbird, and Yum databases: shrink files without removing data to save space and improve speed Surgically remove private information from .ini and JSON configuration files and SQLite3 databases without deleting the whole file Overwrite data in SQLite3 before deleting it to prevent recovery (optional) BleachBit 6.0.1 Beta release notes: BleachBit 6.0.1 beta is now available for testing. This maintenance-focused release includes bug fixes, updated translations, and a range of safe enhancements. This release fixes a Windows security issue that could allow arbitrary file deletion during privileged cleaning (reported by Zeze with TeamT5). It also adds new cleaners (including a DNS cache cleaner, Claude Code, and Visual Studio Code forks), support for multiple Chrome and Edge profiles, new deep scan options for developer directories like node_modules and venv, and safer, faster file shredding. All Platforms Added cleaners for Claude Code, DNS cache, and many Visual Studio Code forks. Added support for multiple Chrome and Edge profiles. Chrome can now clean downloaded AI models. Deep Scan can optionally remove venv, __pycache__, node_modules, and .angular directories. Deep Scan is faster by skipping directories on the keep list. File shredding is safer, faster, and leaves fewer recoverable traces. Improved handling of cookies, symlinks, Unicode filenames, external processes, and configuration files. Improved Expert Mode warnings and long warning dialogs. Fixed crashes related to cleaner detection, invalid Unicode, and malformed cleaner data. Clipboard is now cleared automatically after shredding files via paste operations. Linux Added AppImage support. Added cleaners for Visual Studio Code, Codeium, Librewolf (.deb), Transmission (Flatpak), and Profanity. Improved Linux trash detection, including Snap-installed applications and mounted drives. Fixed Wayland root CLI issues and several Snap-related problems. Improved package dependencies, AppStream metadata, and desktop file handling. Fixed startup crashes when Python Requests is unavailable. Windows Fixed a security vulnerability that could allow arbitrary file deletion when cleaning with elevated privileges. Added %WindowsSystem% variable support. Improved clipboard clearing using native Windows APIs. Improved installer experience on unsupported Windows versions. Reduced installer size and improved application robustness. Fixed Unicode handling, filename anonymization, Git revision reporting, and splash screen stability. [full release notes] Download: BleachBit 6.0 | Portable | ~20.0 MB (Open Source) View: BleachBit Home page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DriversCloud 12.1.6 by Razvan Serea With DriversCloud (formerly My-Config.com), you can explore your computer easily, safely and free. The application quickly scans your PC and identifies the hardware and software components. DriversCloud then establishes a list of the different drivers compatible with your OS and hardware. Download the drivers needed for the proper functioning of your computer. To detect your drivers, DriversCloud also displays a detailed summary of your hardware and software configuration, analyzes your BSOD, monitors in real-time your PC voltages and temperatures and lets you share your configuration online. Once the hardware components have been detected, you will be able to obtain with just a few clicks the latest drivers corresponding to the identified hardware. You can record your configuration on the site for free, and can get the corresponding URL to post the configuration to technical forums, e-mail and social networks. You can also download the detection result (the configuration) as a PDF file. To protect the user's privacy and data confidentiality, a 4-level confidentiality system was created that filters the XML marks and gives control to the user. The default level can be modified in the preferences. Using the maximum level will prevent the user from publishing his configuration and generating a corresponding PDF file. In non-connected mode, each XML configuration is stored on the server for one day (for practical reasons). However, you are given the opportunity to manually delete it. Created in 2004, and continually improved, My-Config.com has established itself on the web as a free service to PC users running Windows and Linux operating systems. The service is designed to work with the most common Internet browsers (Edge, Firefox, Chrome, Safari). Download: DriversCloud 64-bit | 20.0 MB (Freeware) Download: DriversCloud 32-bit | 18.9 MB Link: DriversCloud Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      193
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      ATLien_0
      96
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!