Recommended Posts

  • 3 weeks later...

1.40.1-SB46:

* Synchronised with official r841 from r820 (changelog)

* Updated MEncoder to SB14 from SB13 (changelog)

* Updated MediaInfo to 0.7.50 from 0.7.48 (changelog)

* Updated FFmpeg to r32754 from r31564

* Added Samsung Allshare 1.3.1 from here (thanks, djfred)

* Updated libs (commons-configuration, jgoodies and slf4j)

* Try to fix #85 (Maximum bandwith option appears not to be working)

* Possible fix for AC3 Passthrough (patch from #1069 by mario.ffranco)

Windows Build / Linux Bild

Official Build

In the newest build there is an option that explicitly states "bypass cinavia protection"

http://www.ps3mediaserver.org/forum/viewtopic.php?f=14&t=8883

Someone might want to try it, under transcoding settings.

  • 1 month later...

PS3 Media Server (SubJunk Build) 1.50.0-SB55 released

1.50.0-SB55:

* Synchronised with official r982 from r979, changelog: https://code.google.com/p/ps3mediaserver/source/list?num=3&start=982

1.50.0-SB54:

* Synchronised with official r979 from r957, changelog: https://code.google.com/p/ps3mediaserver/source/list?num=22&start=979

1.50.0-SB54:

* Synchronised with official r979 from r957, changelog: https://code.google.com/p/ps3mediaserver/source/list?num=22&start=979

1.50.0-SB53:

* Synchronised with official r957 from r951, changelog: https://code.google.com/p/ps3mediaserver/source/list?num=6&start=957

1.50.0-SB52:

* Synchronised with official r951 from r930, changelog: https://code.google.com/p/ps3mediaserver/source/list?num=21&start=951

* Updated MPlayer and MEncoder to SB16 from SB15, changelog: http://www.spirton.com/mplayer-mencoder-sb16-released/

1.50.0-SB51:

* Synchronised with official r930 from r910, changelog: https://code.google.com/p/ps3mediaserver/source/list?num=20&start=930

1.50.0-SB50:

* Synchronised with official r910 from r856, changelog: https://code.google.com/p/ps3mediaserver/source/list?num=54&start=910

* Modified Status tab to display a tick when any renderer is found, instead of either the PS3 or warning message.

* Language improvements

Tried using this to stream 3D films to my machine and again getting timeout issues. Certainly shouldn't be a PC issue as running specs in signature. PC however is connected wirelessly to the network, it goes NAS > PC > PS3 so I'm guessing something is stalling along the first part of the route. NAS is wired in to hub, PC wireless, PS3 wired.

I would say it is definitely the wireless AT. I had major issues using PS3 Media Server with wireless, and my home network is pretty damn fast. As soon as I switched over to wired, no issues at all. This was with files over 4+ GB in size keep in mind.

And damn, I am WAAAY behind with the SubJunk Build, but this is one of those apps I have learned to accept "if it ain't broke, don't fix it." I am sticking to SB37, for whatever reason others gave me issues, but with 37 all good, especially DTS sound, which is what I personally like the most out of all the options.

And damn, I am WAAAY behind with the SubJunk Build, but this is one of those apps I have learned to accept "if it ain't broke, don't fix it." I am sticking to SB37, for whatever reason others gave me issues, but with 37 all good, especially DTS sound, which is what I personally like the most out of all the options.

I've learned I pretty much have to update daily because anime encoders love to jump the gun and immediately switch to new versions of codecs. :(

' timestamp='1321481812' post='594458169']

3D films use a higher bitrate than normal movies

you may be losing on the wireless connection. try a complete wired connection first

I would say it is definitely the wireless AT. I had major issues using PS3 Media Server with wireless, and my home network is pretty damn fast. As soon as I switched over to wired, no issues at all. This was with files over 4+ GB in size keep in mind.

And damn, I am WAAAY behind with the SubJunk Build, but this is one of those apps I have learned to accept "if it ain't broke, don't fix it." I am sticking to SB37, for whatever reason others gave me issues, but with 37 all good, especially DTS sound, which is what I personally like the most out of all the options.

Yeah will have to find a way to wire in the PC otherwise it will just be a case of running the MKV through MKV2VOB and leaving on the NAS for easier streaming.

I would say it is definitely the wireless AT. I had major issues using PS3 Media Server with wireless, and my home network is pretty damn fast. As soon as I switched over to wired, no issues at all. This was with files over 4+ GB in size keep in mind.

And damn, I am WAAAY behind with the SubJunk Build, but this is one of those apps I have learned to accept "if it ain't broke, don't fix it." I am sticking to SB37, for whatever reason others gave me issues, but with 37 all good, especially DTS sound, which is what I personally like the most out of all the options.

I would consider upgrading sooner rather than later, some good chances made since 3x builds. However I'm biased as I'm a software updating fanatic :p

You guys have convinced me, installing the latest SubJunk Build posted above by MediocreNoob into it's own folder and will see how it works out. (Y)

Sounds like a plan.

Have used it every day since I posted above, multiple movies, various sizes, few different types of codecs, and everything is working perfect, no issues at all. So definitely a good solid release on my end. (Y)

  • 3 weeks later...
  • 3 weeks later...
  • 4 weeks later...

1.50.1-SB59:

* Switched from using SVN source to Git

* Synchronised with official r1106 (dd74c3be7f) from r1010, changelog

* Updated MPlayer and MEncoder to SB22 from SB19, changelog

* Updated FFmpeg to r35509 from r31564

SubJunk Windows Build / SubJunk Linux Build / Official Build

1.50.1-SB61:

* Switched from using Git source back to SVN

* Synchronised with official r1024 from r1014, changelog

* Updated to latest versions of libraries (codec, jdom, logback and slf4j)

SubJunk Windows Build / SubJunk Linux Build / Official Build

1.50.2-SB62:

* Synchronised with official r1085 from r1024, changelog

* Updated MPlayer and MEncoder to SB23 from SB19, changelog

1.50.2-SB63:

* Synchronised with official r1088 from r1085, changelog

SubJunk Windows Build / SunJunk Linux Build / Official Build

This topic is now closed to further replies.
  • Posts

    • Euro-Office must default to ODF to be considered "genuinely European", LibreOffice argues by David Uzondu Euro-Office is a web-based collaborative office suite that positions itself as a "European sovereign alternative" to American tech companies, backed by a coalition of developers including Nextcloud, IONOS, Abilian, BTactic, OpenProject, and, more recently, Tuta. The project officially went live a couple of days ago, but not before drawing heavy fire from LibreOffice developers, who called the marketing claim that Euro-Office represents the "first open-source office suite developed in Europe" a deceptive historical inaccuracy because projects like OpenOffice and LibreOffice existed decades earlier. Now that the project has launched, LibreOffice is back with another complaint, arguing that Euro-Office cannot consider itself "genuinely European" while it pushes proprietary Microsoft defaults on users. Euro-Office had promised to improve the OpenDocument Format (ODF) back in April, but the current release still plagues users with several technical failures. For instance, the suite lacks an admin setting to enforce ODF, and mobile editors completely block ODF saves, forcing files into Microsoft's OOXML formats. Some configurations force files into read-only mode, while editing frequently corrupts document formatting or erases data. LibreOffice thinks that merely supporting a format as an afterthought does not make you a sovereign alternative, as file formats are the battleground where" digital sovereignty is won or lost." The road to the first stable release of Euro-Office has been quite bumpy due to an aggressive public fallout with OnlyOffice, from which the coalition originally forked the project. OnlyOffice struck back by accusing the coalition of violating copyright terms under its AGPLv3 branding requirements by stripping the original branding anyway and forking the code. Getting Euro-Office up and running is a bit wonky (at least for non-technical users), as there is no direct installer to grab off the web. The easiest way we learnt is by using Docker. First, pull the official Euro-Office image from the GitHub Container Registry: docker pull ghcr.io/euro-office/documentserver:latest Then, run the container with active ports and a secure JWT token, enabling the test environment: docker run -i -t -d -p 8080:80 --restart=always -e EXAMPLE_ENABLED=true -e JWT_SECRET=my_secure_jwt_secret ghcr.io/euro-office/documentserver:latest And finally, open a web browser and go to the following address: http://localhost:8080 If you are running this on a remote server, replace localhost with your server's IP address. You will see the Euro-Office test page, where you can create new text documents, spreadsheets, or presentations directly in the browser. Image via Euro-Office Nextcloud promises that proper standalone desktop versions and mobile apps will arrive in a future release.
    • It’s any of their products not just windows.
    • Google Gemini has been failing for users across the United States, Europe, and Asia since early Wednesday morning, June 10, 2026, and more than six hours into the incident Google has yet to declare a fix............. https://www.techtimes.com/articles/318152/20260610/google-gemini-outage-tops-six-hours-errors-1076-1099-worldwideflash-lite-still-answers.htm
    • Fun fact: There are more Warhammer 40k games than there are stars in the universe.
  • Recent Achievements

    • Week One Done
      FBSPL earned a badge
      Week One Done
    • One Year In
      Jim Dugan earned a badge
      One Year In
    • One Month Later
      Tommi118 earned a badge
      One Month Later
    • One Month Later
      sjbousquet earned a badge
      One Month Later
    • Week One Done
      sjbousquet earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      486
    2. 2
      PsYcHoKiLLa
      197
    3. 3
      +Edouard
      155
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      69
  • Tell a friend

    Love Neowin? Tell a friend!