Recommended Posts

  • 3 weeks later...

1.40.1-SB46:

* Synchronised with official r841 from r820 (changelog)

* Updated MEncoder to SB14 from SB13 (changelog)

* Updated MediaInfo to 0.7.50 from 0.7.48 (changelog)

* Updated FFmpeg to r32754 from r31564

* Added Samsung Allshare 1.3.1 from here (thanks, djfred)

* Updated libs (commons-configuration, jgoodies and slf4j)

* Try to fix #85 (Maximum bandwith option appears not to be working)

* Possible fix for AC3 Passthrough (patch from #1069 by mario.ffranco)

Windows Build / Linux Bild

Official Build

In the newest build there is an option that explicitly states "bypass cinavia protection"

http://www.ps3mediaserver.org/forum/viewtopic.php?f=14&t=8883

Someone might want to try it, under transcoding settings.

  • 1 month later...

PS3 Media Server (SubJunk Build) 1.50.0-SB55 released

1.50.0-SB55:

* Synchronised with official r982 from r979, changelog: https://code.google.com/p/ps3mediaserver/source/list?num=3&start=982

1.50.0-SB54:

* Synchronised with official r979 from r957, changelog: https://code.google.com/p/ps3mediaserver/source/list?num=22&start=979

1.50.0-SB54:

* Synchronised with official r979 from r957, changelog: https://code.google.com/p/ps3mediaserver/source/list?num=22&start=979

1.50.0-SB53:

* Synchronised with official r957 from r951, changelog: https://code.google.com/p/ps3mediaserver/source/list?num=6&start=957

1.50.0-SB52:

* Synchronised with official r951 from r930, changelog: https://code.google.com/p/ps3mediaserver/source/list?num=21&start=951

* Updated MPlayer and MEncoder to SB16 from SB15, changelog: http://www.spirton.com/mplayer-mencoder-sb16-released/

1.50.0-SB51:

* Synchronised with official r930 from r910, changelog: https://code.google.com/p/ps3mediaserver/source/list?num=20&start=930

1.50.0-SB50:

* Synchronised with official r910 from r856, changelog: https://code.google.com/p/ps3mediaserver/source/list?num=54&start=910

* Modified Status tab to display a tick when any renderer is found, instead of either the PS3 or warning message.

* Language improvements

Tried using this to stream 3D films to my machine and again getting timeout issues. Certainly shouldn't be a PC issue as running specs in signature. PC however is connected wirelessly to the network, it goes NAS > PC > PS3 so I'm guessing something is stalling along the first part of the route. NAS is wired in to hub, PC wireless, PS3 wired.

I would say it is definitely the wireless AT. I had major issues using PS3 Media Server with wireless, and my home network is pretty damn fast. As soon as I switched over to wired, no issues at all. This was with files over 4+ GB in size keep in mind.

And damn, I am WAAAY behind with the SubJunk Build, but this is one of those apps I have learned to accept "if it ain't broke, don't fix it." I am sticking to SB37, for whatever reason others gave me issues, but with 37 all good, especially DTS sound, which is what I personally like the most out of all the options.

And damn, I am WAAAY behind with the SubJunk Build, but this is one of those apps I have learned to accept "if it ain't broke, don't fix it." I am sticking to SB37, for whatever reason others gave me issues, but with 37 all good, especially DTS sound, which is what I personally like the most out of all the options.

I've learned I pretty much have to update daily because anime encoders love to jump the gun and immediately switch to new versions of codecs. :(

' timestamp='1321481812' post='594458169']

3D films use a higher bitrate than normal movies

you may be losing on the wireless connection. try a complete wired connection first

I would say it is definitely the wireless AT. I had major issues using PS3 Media Server with wireless, and my home network is pretty damn fast. As soon as I switched over to wired, no issues at all. This was with files over 4+ GB in size keep in mind.

And damn, I am WAAAY behind with the SubJunk Build, but this is one of those apps I have learned to accept "if it ain't broke, don't fix it." I am sticking to SB37, for whatever reason others gave me issues, but with 37 all good, especially DTS sound, which is what I personally like the most out of all the options.

Yeah will have to find a way to wire in the PC otherwise it will just be a case of running the MKV through MKV2VOB and leaving on the NAS for easier streaming.

I would say it is definitely the wireless AT. I had major issues using PS3 Media Server with wireless, and my home network is pretty damn fast. As soon as I switched over to wired, no issues at all. This was with files over 4+ GB in size keep in mind.

And damn, I am WAAAY behind with the SubJunk Build, but this is one of those apps I have learned to accept "if it ain't broke, don't fix it." I am sticking to SB37, for whatever reason others gave me issues, but with 37 all good, especially DTS sound, which is what I personally like the most out of all the options.

I would consider upgrading sooner rather than later, some good chances made since 3x builds. However I'm biased as I'm a software updating fanatic :p

You guys have convinced me, installing the latest SubJunk Build posted above by MediocreNoob into it's own folder and will see how it works out. (Y)

Sounds like a plan.

Have used it every day since I posted above, multiple movies, various sizes, few different types of codecs, and everything is working perfect, no issues at all. So definitely a good solid release on my end. (Y)

  • 3 weeks later...
  • 3 weeks later...
  • 4 weeks later...

1.50.1-SB59:

* Switched from using SVN source to Git

* Synchronised with official r1106 (dd74c3be7f) from r1010, changelog

* Updated MPlayer and MEncoder to SB22 from SB19, changelog

* Updated FFmpeg to r35509 from r31564

SubJunk Windows Build / SubJunk Linux Build / Official Build

1.50.1-SB61:

* Switched from using Git source back to SVN

* Synchronised with official r1024 from r1014, changelog

* Updated to latest versions of libraries (codec, jdom, logback and slf4j)

SubJunk Windows Build / SubJunk Linux Build / Official Build

1.50.2-SB62:

* Synchronised with official r1085 from r1024, changelog

* Updated MPlayer and MEncoder to SB23 from SB19, changelog

1.50.2-SB63:

* Synchronised with official r1088 from r1085, changelog

SubJunk Windows Build / SunJunk Linux Build / Official Build

This topic is now closed to further replies.
  • Posts

    • Louis Rossmann suing Samsung over "990 Pro SSD warranty scam" by Sayan Sen Back in 2023, if you recall, Neowin reviewer Robbie Khan had a dispute with Samsung over his 990 Pro SSD, which was rapidly losing its health. After significant back and forth, the tech giant had finally released firmware to "stop" the issue. Interestingly, its previous flagship at the time, the 980 Pro was also facing problems leading to two consecutive sets of firmware fixes. Three years later, it looks like a similar conflict has now broken out between tech repair entrepreneur YouTuber Louis Rossmann and Samsung, as it has escalated into a threatened lawsuit after the company allegedly refused to appropriately replace a failing 990 Pro SSD that remained under warranty. According to Rossmann, a 4TB Samsung 990 Pro NVMe SSD purchased for approximately $330 less than two years ago, began experiencing major hiccups and issues, even though he claims it had been operated under ideal cooling conditions. It was installed in a RAID 1 array and cooled by a heatsink and dual high-speed fans. However the drive reportedly started dropping out of the array, exhibiting controller-level failures that eventually became not useable in any meaningful way. Rossmann said Samsung’s support process was marked by delays and confusion from the very start. After initially contacting the wrong regional support channel, he was redirected to Samsung’s memory support division where he submitted detailed diagnostics, logs, and proof of purchase. Rossmann runs a repair company and owns an ACE Lab PC-3000 machine, which is a professional-grade data recovery equipment. As such, he had been confident in his diagnostics. Samsung even seemingly acknowledged that later. Regardless, Rossmann claims that his initial support ticket was automatically closed before a full 24-hour response window had elapsed, forcing him to reopen the case and resubmit documentation. The controversy however intensified further from here after Samsung accepted the drive for warranty evaluation but later returned it with a repair report stating that the drive had passed its testing and that the SSD had been verified as functional. Rossmann strongly disputed those claims citing that his own independent testing on PC-3000 showed write speeds reducing to as low as 40–60 MB/s before the drive failed entirely. Samsung subsequently informed him that the SSD had been reset and reflashed, passing internal stress tests. However, the company also stated that replacement units were unavailable due to an industry-wide memory shortage and suggested that a refund process could be initiated if further testing confirmed the fault. Thus, to settle, the company offered a refund of $330, the amount that was initially paid by him to make the purchase. Here, Rossmann pointed out the seeming hypocrisy of the tech giant as in how no Samsung drive was apparently allocated for warranty replacements, but they were abundantly available for retail sales especially when using business accounts. As you can see, Rossmann is indeed right, there are Samsung 990 Pro 4TB SSDs on Amazon currently for $950 (shipped and sold by first-party Amazon US itself), and they are also available on Samsung's own store too, albeit for an even higher price of $1100. Thus Rossmann argues that Samsung’s inability or unwillingness to provide a replacement while the same model remains available for purchase at significantly higher market prices reflects a failure to honor its warranty obligations. He has issued a formal 60-day notice and says he intends to file suit in Texas small claims court, asserting that companies should face greater costs for denying legitimate warranty claims than for fulfilling them. You can check out the full video titled "Samsung's 990 Pro SSD warranty policy is a scam; I'm taking them to court," at the link below. Source and image: Louis Rossmann (YouTube) As an Amazon Associate we earn from qualifying purchases
    • Was it too much to ask to show the icon in this article?
    • Frankly, I blame whoever is writing such articles. "A big improvement/update and/or new feature is now available to everyone! Also, use this unofficial tweak tool to enable it because it actually isn't available to you yet officially and might not in fact even be entirely ready or whatever, hence why it is perhaps not enabled for you*. But it's great and you should enable it!" I mean there's nothing wrong with sharing info about some feature you might need to enable via unofficial means, of course. It's just that these articles tend to essentially end up being two news pieces in one, and one of them tends to be a bit misleading. (*Yes, yes, the "it's a controlled rollout!" thing. Not a fan of that one either. The argument, not the actual rollout.)
    • Thank you. Will do. I read in the release notes that editor config might be at play here.
    • Actually, I think even Microsoft doesn't know how to control it
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      PsYcHoKiLLa
      185
    3. 3
      +Edouard
      158
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!