A lost laptop, a $54 million lawsuit


Recommended Posts

http://redtape.msnbc.com/2008/02/a-lost-laptop-a.html#posts

Posted: Tuesday, February 12 at 05:00 am CT by Bob Sullivan

How much compensation does a consumer deserve for the loss of a laptop computer loaded with personal information? Raelyn Campbell figures it?s $54 million -- if you throw in a little extra for lost time and frustration.

Six months after bringing a damaged laptop computer into a Best Buy electronics store for repairs, and three months after the firm admitted losing it, Campbell filed the whopper of a lawsuit recently in Washington, D.C., Superior Court.

Best Buy has told Campbell that her demands are unreasonable, and has tried to settle for far less. But Campbell said she didn?t start out making astronomical demands. Months of stalling and brush-offs by the company led her to the drastic measures, she said.

Best Buy spokeswoman Nissa French said the company couldn?t comment on Campbell?s story, citing the ongoing litigation. A lawyer for Best Buy did not return phone calls or e-mails.

When Campbell bought her new laptop in 2006 at a Best Buy store near her D.C. home, she said a clerk talked her into paying $300 for an extended warranty. She thought that was a fortunate choice when the computer's on/off switch broke about a year later.

In May, she brought the computer back to the store was told repairs would take two to six weeks. That wasn't terribly convenient for Campbell, who works for a nonprofit Asia research firm and travels frequently overseas.

But six weeks turned out to be a wildly optimistic estimate.

The run-around

By late August, when she returned from a trip to Asia, she still had heard nothing from the company and started to get anxious. Her Aug. 24 complaint letter to the firm was filled with exasperation.

?On July 11, I contacted the (store?s) helpline and was instructed by ?Agent David Goodfellow? that it would be ?ready within days,?? she wrote to the firm in a letter dated Aug. 24. ?I called the service line again on July 19, and was told by a female agent that the computer appeared to be at the ?Louisville Services Center since July 4.? On July 25, I called again and spoke to Brenda, who transferred me to Daniel. Daniel confirmed that a ?part had just been ordered. It should leave Louisville soon.? ?When I heard nothing further, I called yet again on Aug. 7 and spoke with Ashley. When she could not confirm any additional information, I asked to speak to a manager. I was told the manager, ?Marsha,? was in a meeting. I asked her to call ASAP. My call was not returned, so I called again on Aug. 9. I explained the whole situation yet again to ?Cicero,? who indicated that there seemed to be a problem.?

The problem was severe: ?It never appears to have left the store,? she recounted Cicero as telling her. A few days later, he called back and admitted that the computer had been lost. The way she sees it, the other company clerks had been lying to her all along.

Cicero was considerate, Campbell said, and told her she would be compensated. But two weeks passed, and she hadn?t heard anything from the company.

After several more weeks of fruitless phone calls, she received an offer she calls insulting: $900 for her trouble -- in the form of a store gift card. Her blood boiled. She had paid more than $1,100 for the computer and the warranty. And she?d also lost thousands dollars worth of music and thousands of irreplaceable photos.

"It wouldn't even cover the cost of replacing the computer, let alone the software, or my time,? she said of the gift card offer. ?And why would I want to go spend money at their store again after the way I was treated?"

Campbell rejected the offer, instead demanding $2,100 in cash. She said her request went unanswered. In October, she urged family and friends to write to the store saying they wouldn't shop there until the matter was resolved. To her surprise, the store's general manager, Robert Delissio, replied to two of them.

(continued...)

Link to comment
https://www.neowin.net/forum/topic/619358-a-lost-laptop-a-54-million-lawsuit/
Share on other sites

$54 mil is to get best buys attention being they gave her the run around and didn't notify her that he pc was lost and that if any personal identity information (she said there were tax returns) was on the pc to watch her credit in case of identity theft. Best Buy should have pony up and pay for the year of credit watch.

Personally i don't know why they need the hd for repairing a broken power switch. They should have taken it out, put it in a static bag and give it back to the user. Also have the user sign a waiver that if hd is lost its the users problem and not best buy....

BB definitely screwed this lady over. It's so frustrating getting the run around, having to make many phone calls over the course of a month just to be told that they were lying to you the whole time. That is simply horrible service, and then to top it off, they offer a whopping $900 for her trouble and missing laptop? That's ludicrous. I'm sure she doesn't really expect to get $54 million, but when you're not being heard when you're in the right, what else are you going to do? Talk is cheap and physical confrontations will only hurt her chances, so I think she did the best thing in getting their attention, and now they can't simply ignore her. Hopefully BB will own up to their mistake in this regard. Hopefully the lady will learn the beauty of backups.

I don't think the $900 offer was that bad... The laptop was a year old so wouldn't be worth anything near what she paid for it...

Obviously BB have messed her around but asking for $54 million is just silly! A couple of grand (like she asked for in cash) would be fair.

Will be interesting to hear the result :D

I don't like the fact how she demands the software is lost... You have CD's for the software. Music? well if its CD's then re-rip. If not, iTunes will probably let you download again. Photos are understandable but really...

$54 Mil? Christ.

How much is your personal information worth to you? I think this is part of the reason she asked for so much. It's easy to say backup your data, but when a copy of it is stolen... what are you going to do? Someone is probably out there selling her information.

I'm still trying to understand how somebody's laptop would get lost. What do they do with them, shuffle them around the store? Isn't there some designated area in the back for all machines that are in for service? It just doesn't make sense.

Even if the amount of $54 million is completely ridiculous, I fully support that lady in her quest to get Best Buy to clean up their act.

There are way too many corporations who have turned their Customers Services in Customers Extortion and Disservice.

Best Buy deserves a good justice kick in the wallet.

Well, with 54 million dollars is enough for her to live the rest of her life without working...

I bet she wins this, if she can convince the jury that she had anything of REAL value on it.

Selfish and stuipid people.

Still, they should just have given her a new laptop + some accessories.

She still would have gotten more than she lost:p

I'm still trying to understand how somebody's laptop would get lost. What do they do with them, shuffle them around the store? Isn't there some designated area in the back for all machines that are in for service? It just doesn't make sense.

lost during shipping to a service center? although that is also incredible, if there are several laptops that require repair.

and guys, if you read the article, you would've seen the reason behind the figure:

The amount intentionally echoes another lawsuit that made headlines last year -- a case involving a D.C. judge who sued a dry cleaner for $54 million over a lost pair of pants. That case was eventually dismissed. Campbell freely admits she picked the same amount in an effort to attract media attention.

it's not really about the money. it's about forcing a company to comply with protocol (e.g., notifying a customer about loss of data, etc.).

(neufuse, i know that you copied and pasted the title from the article. i just undid the caps lock formatting. :))

I'm still trying to understand how somebody's laptop would get lost. What do they do with them, shuffle them around the store? Isn't there some designated area in the back for all machines that are in for service? It just doesn't make sense.

We've shipped more than a few machines out and surprisingly, they do get lost. Hp was a prime example of a company that simply doesn't know where their stuff goes. We had a laptop that was "gone" and no one knew where it was. It finally turned up weeks later and they shipped it back repaired but it happens. Unreal though.

And the price, yeah - ok...she's got people's attention...but I'm sure there's going to be a BB employee (maybe bangbang023, unless I'm mistaken) that can vouch that you pretty much sign all your data over to them and they do with it what they please. They aren't responsible for your data and aren't responsible for making backups of it either. I don't like Geek Squad at all, but I can all but guarantee that this customer signed an agreement stating that they aren't going to be responsible for anything lost on her machine...if her data was that irreplaceable, she should have been backing it up.

It still amazes me how so many people fail to spend 60 dollars per year on a nice online backup solution that will back up your entire laptop with multiple copies. Why does this happen? If you want to sue for money, wouldn't it be more of a cost benefit to be proactive and spend 60 dollars to back it up to begin with? I can find fault on both parties but as much as I hate to say it...if I had to choose the person to blame, it's her, not Best Buy.

It still amazes me how so many people fail to spend 60 dollars per year on a nice online backup solution that will back up your entire laptop with multiple copies. Why does this happen? If you want to sue for money, wouldn't it be more of a cost benefit to be proactive and spend 60 dollars to back it up to begin with? I can find fault on both parties but as much as I hate to say it...if I had to choose the person to blame, it's her, not Best Buy.

according to the article, the problem isn't the loss of private data, but the potential for identity theft.

A bigger problem: ID theft

At the same time, she visited a legal aid office and was asked by a lawyer there whether she had any personal information on the computer?

"Of course I did," she replied. "My tax returns were on there."

Campbell was informed that she had a bigger problem than a lost computer ? the potential for identity theft. She also learned that Best Buy was in violation of the district's security breach notification law, which requires companies that have lost a consumer's data to tell them. To date, she has not received that notification.

Campbell immediately enrolled in a $10-a-month identity theft monitoring service.

Good catch - I missed that.

I guess she may have a bit more to go on then hey? BB should be picking up the charges on that for sure, but I guess this is where the court battles begin, so it can all be logged. A lawyer would have a good case with something like this, especially for people willing to do it to expose companies that might be doing a poor job of protecting the data of private citizens. Not like BB hasn't been under fire a million times already...wonder what happens in the end?

I work for the company, so remember that as I post.

It's really inexcusable for Best Buy to lose the laptop like this. I don't blame the woman for going after them as much as possible. My friend had a much less extreme issue, though an issue nonetheless. Three times she had to have her laptop sent out for repair and all three times they lost the damn power cord on her. They wouldn't replace it after the first time. It was unbelievable that she had to be out more money just to replace a power cord that they lost. Simply put, the warranty centers are way too careless and something needs to be done to correct the problems and ensure that customers are getting their stuff back.

I know there are times when it may get lost during shipment or at the actual service center, but one associate said that it never left the store and was lost from the store. That to me is absolutely ridiculous, unless perhaps an employee made off with it and it wasn't actually "lost." I'm a Firedog tech at Circuit City and the only way a computer would be lost from our store is by theft as there's really no way to just lose track of a computer sitting in a back room being serviced or waiting to be sent out.

She signed a sheet saying (3 times) that Best Buy and it's employee's are not responsible for lost data. She also declined $99 data backup at time of check in. She also decided to not back up her data when the computer was working.

Media attention that will dissapear in a month after the out of court settlement.

My SMALL store ships out 30+ items a week. We have 1-2 cases of this a YEAR in our store.... out of 1400+ service items. The customer is given a new item, and has to deal. (Usually happy)

Under warranty if she sent that laptop out and declined Backup.... and If that hard drive fails a drive test, we replace it and discard of it. She is SOL. Because she signed the paper. Read before you sign...

Or wait... take the HD out of the machine before you have it sent out.

But apparently the data wasnt worth $99 from the start.

Yawn. I see out of court settlement, and everyone will forget she existed, and nowhere on her tombstone will it say "She stuck it to Best Buy".

Lost laptop? Sue for millions!

Is your laptop worth $54 million? Raelyn Campbell of Washington, D.C., is suing Richfield-based Best Buy for that amount after it lost her laptop computer while it was in for repairs.

Is your laptop worth $54 million?

Raelyn Campbell of Washington, D.C., is suing Richfield-based Best Buy for that amount after it lost her laptop computer while it was in for repairs.

Campbell, who could not be reached Tuesday, filed a negligence lawsuit suit against the company in Washington Superior Court on Nov. 16, seeking fair compensation for replacement of the $1,100 computer and extended warranty, plus expenses related to identity theft protection.

Best Buy spokeswoman Nissa French said in an e-mail that Campbell "was offered and collected $1,110.35" as well as "a $500 gift card for her inconvenience."

According to Campbell's blog at bestbuybadbuyboycott.blogspot.com, Geek Squad employees spent three months telling her different stories about where her laptop might be before finally acknowledging that it had been lost.

Campbell said that she doesn?t really expect to get $54 million, but chose the amount to attract attention to her case. It?s the same amount a D.C. judge sought against a dry cleaner last year that lost a pair of his pants.

Melissa Ngo , senior counsel with the Electronic Privacy Information Center in Washington, D.C., wasn?t familiar with Campbell?s case but said consumers need to get smart about protecting their data to avoid such situations.

?As more of our lives get put into electronics, these issues of privacy and security are going to become more common,? said Ngo. ?People don?t want to take the few extra minutes of inconvenience, but they need to encrypt their data and back it up.

Source

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      222
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!