Let's talk Filters!


Recommended Posts

I use my hood all the time if I can. Never been a fan of filters, it seems like even the best ones will add flare to your images once in a while. Not sure why people are saying hoods are useless at night, they still block some stray light and still offer protection (even more important if you're fumbling around in the dark!) -- although they can be bad for flash photography if the hood casts shadows.

Yes, less light..eg. unnecessary light which will cause flare. The lens does only pick up light in its angle of view, its the stray light from the wider angles that cause the flare.

tut_lensflare_straylight.png

I'm not sure why you're saying not to use a hood? It won't negatively affect your image or exposure but will help for both protection and stray lights that can enter the lens. There is always a chance of flare indoors, depending on the situation--especially bright light sources and ones reflecting around the room. (Christmas time for example)

If a lens only picks up light in its angle of view then that picture is wrong and flare is impossible. The sun and the light coming from it are well outside the angle of view.

It will affect an image and should only be used when you have to. Photography is the capture of light. If there is no source for flare why limit the light you're capturing? A picture is not just composed of the things you see directly through the viewfinder. The surrounding conditions make a difference to the picture. What you're doing is throwing those out every time in case occasionally there is a flare source.

Not all light outside the angle of view = Bad light or flare.

The sun and light are outside of the angle of view, but are still hitting the front element.

Lens flare is caused by non-image light which does not pass (refract) directly along its intended path, but instead reflects internally on lens elements any number of times (back and forth) before finally reaching the film or digital sensor.

Ordinarily light which is outside the angle of view does not contribute to the final image, but if this light reflects it may travel an unintended path and reach the film/sensor. In the visual example with flowers, the sun was not actually in the frame itself, but yet it still caused significant lens flare.

I've been using hoods at night for a while now and it has had no negative affect on the image. Again, it's outside of the angle of view and does not block image light which is what your camera meters and captures. The surrounding conditions of light will light the object you're capturing just fine, you just don't want that surrounding light to hit your front element at the extreme angles which might cause flare.

*Face palm*

Look guys, lens hoods have been around forever. If they altered the quality of the images what so ever people wouldn't use them. But that's not the case. EVERYBODY ALWAYS says to keep the hood on for safety and to prevent any extra flares.

Really if hoods make no difference and only improve the image then why aren't primes manufactured with precision matched non-removable hoods?

Why do you see pros taking photos without hoods? Maybe one of you should tell them.

What a hood is made from is important, as is mentioned in one of your links, if a hood has no effect on the picture then why is this important? (unless you have a hood made out of those new carbon nano tubes that are the blackest black)

Ordinarily light which is outside the angle of view does not contribute to the final image, but if this light reflects it may travel an unintended path and reach the film/sensor.

Yes but all this light is not necessarily flare and not necessarily unwanted. Also if it's reaching the film/sensor it's part of the image. ;)

@crazzy88ss If EVERYBODY ALWAYS says this how come NOBODY in the articles giga links to says this?

Edited by monkey13

Sorry Mr Spoon I've just realised I haven't posted anything relevant on the filters thing.

That Hoya is fine. I've got the same one. It will make no noticeable difference to any of your pictures but it will protect your lens. Scratch that and you just buy another one. Costs a bit more if you scratch the lens.

The one you've linked to there is 52mm. The lens has a threaded end and it just screws in. Easy to put in and to remove if you want to use another filter.

What would be the point of non-removable hoods? That would be horrible for storage.

I can imagine a pro wouldn't use a hood in a controlled environment like a studio, but if they choose to use one out in the wild: more power to them. :laugh: Canon includes a hood in all their L lens and Sigma in their EX line--they do it for a reason. It's silly not to use it--they make them for a reason.

Here's some Art Wolfe if you want: http://www.usa.canon.com/dlc/controller?ac...&fromTips=1

Every single website have recommended to use a hood--hell I even took out my Canon and Sigma manuals and they said to use it as well to block unwanted light and for protection.

What it's made of is important so that the light doesn't reflect inside the hood itself onto the front element. Matte surfaces on the inside of the hood is best.

Yes but all this light is not necessarily flare and not necessarily unwanted.

If you're in sanctified's position and want it for the artistic quality, then sure. Otherwise, it is unwanted non-image forming light which will either cause flare, lower the contrast, etc.

Every single website have recommended to use a hood--hell I even took out my Canon and Sigma manuals and they said to use it as well to block unwanted light and for protection.

What it's made of is important so that the light doesn't reflect inside the hood itself onto the front element. Matte surfaces on the inside of the hood is best.

If you're in sanctified's position and want it for the artistic quality, then sure. Otherwise, it is unwanted non-image forming light which will either cause flare, lower the contrast, etc.

Every single website apart from one of the ones you linked.

http://www.vanwalree.com/optics/lenshood.html

There are many occasions where a lens hood does not add to the image quality.

Guess what the inside of your hood is not a perfect non-reflective surface. So it is having and effect on the picture. If you don't need it to stop flare why put it there?

"non-image forming light " What? If it's non-image forming (whatever that is) then it's having no effect on my picture.

You're confusing unwanted light, flare, with light from outside the angle of view. They are not the same thing and not both always bad (you may want a flare photo). Then you're advising people that the hood will make no difference to the picture. Of course it does. It's whether you're bothered enough about this to remove the hood. Personally I only put mine on when there is flare I don't want.

Yes, a hood won't suddenly make your image better. It will though help from reducing the image quality that you can get from unwanted light.

Why are we onto talking about my lens hood now? :laugh: I'm sure it's not a perfectly non-reflective surface, but its not reflective by any means and not degrading my IQ. Again, if I don't use it to stop flare, I use it anyway for the added protection.

I've already explained non image forming light above and its effects on your picture:

Lens flare is caused by non-image light which does not pass (refract) directly along its intended path, but instead reflects internally on lens elements any number of times (back and forth) before finally reaching the film or digital sensor.

Ordinarily light which is outside the angle of view does not contribute to the final image, but if this light reflects it may travel an unintended path and reach the film/sensor. In the visual example with flowers, the sun was not actually in the frame itself, but yet it still caused significant lens flare.

You're confusing unwanted light, flare, with light from outside the angle of view. They are not the same thing and not both always bad (you may want a flare photo). Then you're advising people that the hood will make no difference to the picture. Of course it does. It's whether you're bothered enough about this to remove the hood. Personally I only put mine on when there is flare I don't want.

Flare is not a type of light, it's the effect of the light hitting from outside the angle of view onto the lens. Sure, it's not bad if you actually want that effect, but otherwise it is. (and as far as I know, most people don't want flare/glare/etc)

What negative ways is the hood affecting picture?

By the way, you took that sentence from the linked website out of context:

Lens hoods are often undervalued and considered impractical because of the space they require in the camera bag. Too often I notice photographers with the best lenses money can buy, but who employ them without lens hood - or tripod for that matter. They will either say that a lens hood is impractical or that their lens is so good that it does not need a hood. As to the last reason, that one is plainly wrong. There are many occasions where a lens hood does not add to the image quality, but there are also many occasions where it does - even with the best lenses. IMHO, a proper lens hood should be among the standard equipment of the serious photographer. An adjustable bellows lens hood (compendium) is a very flexible solution for field work with a tripod, when prompt action is of no concern. One compendium hood serves a battery of lenses. In a ready-to-shoot shoulder bag outfit each lens is best equipped with an individual hood. Any hood, even if it is imperfect, is better than no hood at all.

Here we go.

Yes, a hood won't suddenly make your image better. It will though help from reducing the image quality that you can get from unwanted light.

ARGGHHH. This seems to be a concept you can't grasp. Not all light from outside the angle of view is unwanted light but you're throwing it away every time. Also not all light from outside the angle of view is flare.

Why are we onto talking about my lens hood now? :laugh: I'm sure it's not a perfectly non-reflective surface, but its not reflective by any means and not degrading my IQ. Again, if I don't use it to stop flare, I use it anyway for the added protection.

You are. If you don't care about this that's ok I'm just saying don't go round telling people it has no effect.

I've already explained non image forming light above and its effects on your picture:

Lens flare is caused by non-image light which does not pass (refract) directly along its intended path, but instead reflects internally on lens elements any number of times (back and forth) before finally reaching the film or digital sensor.

Ordinarily light which is outside the angle of view does not contribute to the final image, but if this light reflects it may travel an unintended path and reach the film/sensor. In the visual example with flowers, the sun was not actually in the frame itself, but yet it still caused significant lens flare.

This whole bit you keep posting is wrong. I was hoping you'd picked up on that. How can it be non-image light and yet still reach to film or digital sensor (the image)? This is a direct contradiction. I'll assume you mean unwanted light.

Light outside the angle of view does contribute to the image. I thought we had already established that. If it didn't flare would be impossible and once again not all light from outside the angle of view is unwanted light.

Flare is not a type of light, it's the effect of the light hitting from outside the angle of view onto the lens. Sure, it's not bad if you actually want that effect, but otherwise it is. (and as far as I know, most people don't want flare/glare/etc)

Did I say flare was a type of light? That definition is incorrect. It's light above a certain intensity hitting the lens at a certain angle and refracting/reflecting within the lens into the image.

What negative ways is the hood affecting picture?

You are stopping light coming into the camera. A picture is more than just what you frame in the viewfinder.

By the way, you took that sentence from the linked website out of context:

An article about lens hoods that you posted. That says that a lens hood is not needed for every photo. Sounds very in context to me.

Guess what even with a hood on every time you are still getting light from outside your angle of view. The only good thing hood does (image wise) is stop light coming in at the critical angles that cause flare. If there is no light source to flare then the hood is only having a decremental effect.

ARGGHHH. This seems to be a concept you can't grasp. Not all light from outside the angle of view is unwanted light but you're throwing it away every time. Also not all light from outside the angle of view is flare.

What light are you talking about then? Other than flare, what other light is it that you're missing when you put the hood on?

You are. If you don't care about this that's ok I'm just saying don't go round telling people it has no effect.

For the most part, it doesn't have an effect. If you'd like to show me some tests yourself, feel free.

This whole bit you keep posting is wrong. I was hoping you'd picked up on that. How can it be non-image light and yet still reach to film or digital sensor (the image)? This is a direct contradiction. I'll assume you mean unwanted light.

Light outside the angle of view does contribute to the image. I thought we had already established that. If it didn't flare would be impossible and once again not all light from outside the angle of view is unwanted light.

Non-image light is the light that is not metered/exposed for when you capture the image. This is the whole concept of a lens angle of view. Light outside of its angle of view won't contribute to the image in the sense of the light needed for the exposure to the sensor. It will negatively add to the image in the fact that it usually adds lens flares, blobs, or decreased contrast.

You seem to think that light from outside the angle of view of the lens matters for the exposure of the object you're capturing. It strictly does not since that light won't be coming directly in contact within the focal place depending on your lens. This is why long telephoto lens have larger and longer hoods while wide angles lens or fisheyes have very small ones. (angle of view is wider for UWA, smaller for telephoto)

You are stopping light coming into the camera. A picture is more than just what you frame in the viewfinder.

Yes, unwanted light. The light from outside of the angle of view does not matter for the exposure and metering of the image. Viewfinders are increasingly accurate--a 100% frame viewfinder will show you what you will get in your image. (save for dynamic range which is dependent on your sensor)

Seriously now. Take your lens right now and put the hood on and off in several different lighting situations. It does not affecting the exposure at all.

An article about lens hoods that you posted. That says that a lens hood is not needed for every photo. Sounds very in context to me.

Guess what even with a hood on every time you are still getting light from outside your angle of view. The only good thing hood does (image wise) is stop light coming in at the critical angles that cause flare. If there is no light source to flare then the hood is only having a decremental effect.

Are you joking with me? I honestly don't know. :laugh: The article can't recommend hoods more than enough. Of course there are situations where flare won't be a problem--I've stated that already. The reason I suggested a hood though is for the added protection.

If there is no light source to flare then the hood is only having a decremental effect.

Really? I'd like to see that. You're confusing yourself with angle of views and the exposure of an image.

Of course if you decided to use the Canon 1200mm lens hood with an 8mm fisheye, you'd be losing wanted light. :rofl: Hoods are specifically designed for the manufactured lens according to their angle of view, and will not affect your light needed for the image exposure.

Hey monkey. Why don't you SHOW us some examples of when a lens hood would REDUCE image quality. Or how not having a hood HELPED the image quality.

And to cover all of the times you say "what if you WANT a lens flare", all I have to say is TAKE OFF THE HOOD! That's why they're removable...

You're a brave soul, giga.

First did I ever say having a hood on all the time "reduces image quality" (whatever that means)? No what I said is that having a hood on all the time effects the pictures you're taking.

A lens hood may have no effect on exposure values, and I'm willing to bet you mean f-stops and shutter speeds when you say exposure. So following on from my first piece of camera wisdom (A photo is more than just what you see in the viewfinder). I'll impart as second. The exposure of a picture is more than just f-stops and shutter speeds. Do you think maybe the colour of the light might have an effect on the picture?

Have a look at these two pictures taken quickly in my study just now with a bulb just out of shot (ignore the hideous artex ceiling it was like that when we moved in). You can try this yourself.

1. No lens hood iso800 31mm f4.0 1/30s

imgp0125md3.jpg

hist2ps9.jpg

2. Lens hood on iso800 31mm f4.0 1/30s

imgp0124eu9.jpg

hist1do7.jpg

See any difference? Maybe in the colour and the histograms? This was just a quick and dirty example as well.

If you want to continue with the ridiculous belief that a piece of kit designed to stop light entering the lens, has no effect on the light entering the lens. You can, just don't try to convince other people of this.

Hmn. Sounds familiar are you guys religious or Scientologists?

The second picture with the hood on has a higher contrast compared to the one without one. Your histogram is also showing a wider dynamic range (shadows/midtones) that is captured with the hood. Looks like the hood did help you out.

Again, we're trying to say that having a proper hood on does not negatively effect your image. The hood is not going to block light from hitting your subject that you're capturing, just the stray lights that will hit and reflect off your lens internals which causes things such as flare and contrast problems like you just demonstrated above.

Light particles do not bend--if you photograph a subject--let's say an apple located right in front of you. The apple is lighted from a lamp that's out of the frame of view. The hood isn't going to stop from lighting that apple, the wall behind it, or anything around it. It's only going to stop the light coming in to the lens from the extreme angles that cause the problems already stated.

If you want to continue with the ridiculous belief that a piece of kit designed to stop light entering the lens, has no effect on the light entering the lens. You can, just don't try to convince other people of this.

What? We've been saying all along that hoods block the light entering outside of the angle of view of the lens. Several diagrams have been posted as well.

And no, I'm not a Scientologist? Are you? Does it matter?

What light are you talking about then? Other than flare, what other light is it that you're missing when you put the hood on?

For the most part, it doesn't have an effect. If you'd like to show me some tests yourself, feel free.

I've just proved it does have and effect and you are loosing light at least admit that.

The hood did improve contrast but is that the best photo? What if I don't want to improve contrast but want a picture that gives more of a general idea of lighting? These pictures do not display a contrast problem but how a hood effects a picture.

Also you've changed your argument now from " a hood has no effect" to " a hood has no negative effect", following me proving you were wrong first time. This is still an incorrect argument.

If I want improved contrast or to avoid flare then I'd use a hood, but what if it's a lovely sunny day and rather than have better contrast I want to capture the colour of the sun and it's effect on lighting my picture and the surroundings (without the sun in shot)? Why would I use a hood? It would be having a negative effect on the kind of picture I want to take.

Light particles do not bend--if you photograph a subject--let's say an apple located right in front of you. The apple is lighted from a lamp that's out of the frame of view. The hood isn't going to stop from lighting that apple, the wall behind it, or anything around it. It's only going to stop the light coming in to the lens from the extreme angles that cause the problems already stated.

Actually light can bend but that's a discussion for another time. We'll assume we're both not taking photos in extreme gravitational circumstances. :p

I've already proven that this is not the case and given you an example of how hoods can effect an image. Notice that neither of the two pictures I posted had flare. Yet they were different. Therefore the hood is stopping more that just the light that causes flare.

What? We've been saying all along that hoods block the light entering outside of the angle of views. Several diagrams have been posted as well.

Not all light in a picture is from the angle of view. It is impossible to take a picture with light only entering from the angle of view. You've proven this yourself have a look back at your earlier diagrams.

I've just proved it does have and effect and you are loosing light at least admit that.

The hood did improve contrast but is that the best photo? What if I don't want to improve contrast but want a picture that gives more of a general idea of lighting? These pictures do not display a contrast problem but how a hood effects a picture.

Also you've changed your argument now from " a hood has no effect" to " a hood has no negative effect", following me proving you were wrong first time. This is still an incorrect argument.

If I want improved contrast or to avoid flare then I'd use a hood, but what if it's a lovely sunny day and rather than have better contrast I want to capture the colour of the sun and it's effect on lighting my picture and the surroundings (without the sun in shot)? Why would I use a hood? It would be having a negative effect on the kind of picture I want to take.

Best photo? I can't judge that--it was your own testing conditions and I have no idea what post processing you might or could apply. How does it not display a contrast problem though? Problems with light entering at extreme angles include decreased contrast and your tests just proved that.

Also you've changed your argument now from " a hood has no effect" to " a hood has no negative effect", following me proving you were wrong first time. This is still an incorrect argument.

:s From the very first page, my response:

I'm not sure why you're saying not to use a hood? It won't negatively affect your image or exposure but will help for both protection and stray lights that can enter the lens. There is always a chance of flare indoors, depending on the situation--especially bright light sources and ones reflecting around the room. (Christmas time for example)

If I want improved contrast or to avoid flare then I'd use a hood, but what if it's a lovely sunny day and rather than have better contrast I want to capture the colour of the sun and it's effect on lighting my picture and the surroundings (without the sun in shot)? Why would I use a hood? It would be having a negative effect on the kind of picture I want to take.

:rofl: What? If you want to risk flare or reduced contrast, then sure go for it. A hood won't prevent you from taking natural looking shots though and it seems a bit silly that you put forth your argument for this which I already accepted from sanctified on the very first page.

I've already proven that this is not the case and given you an example of how hoods can effect an image. Notice that neither of the two pictures I posted had flare. Yet they were different. Therefore the hood is stopping more that just the light that causes flare.

You won't get flare on every image, of course not. That's dependent on many factors--lighting, lens, etc. You did, though, risk and get the reduced contrast which is an effect of light hitting the lens at the extreme angle.

Not all light in a picture is from the angle of view. It is impossible to take a picture with light only entering from the angle of view. You've proven this yourself have a look back at your earlier diagrams.

Thoroughly confused. We've been over this--hoods only block the light outside the angle of view in order to avoid harsh effects that most people don't want. That's it.

Best photo? I can't judge that--it was your own testing conditions and I have no idea what post processing you might or could apply. How does it not display a contrast problem though? Problems with light entering at extreme angles include decreased contrast and your tests just proved that.

I didn't ask you to judge the best photo. The point I was making was that depending on what you wanted from a photo either can be the best one.

No this does not display a contrast problem. Also there is not just a contrast difference but also a colour difference. It displays how in a very simple test, that you can reproduce yourself, that a lens hood affects a photo. This differing contrast and also differing colour might be what you want in a picture. There was no post-processing. Just shot and hosted. You're quite happy to use them to try and support your argument.

:s From the very first page, my response:

I'm not sure why you're saying not to use a hood? It won't negatively affect your image or exposure but will help for both protection and stray lights that can enter the lens. There is always a chance of flare indoors, depending on the situation--especially bright light sources and ones reflecting around the room. (Christmas time for example)

You can't say that. I just gave you a specific example (sunny day one) of a kind of picture you might want to take where a hood will have a negative effect.

Also maudit asked if a hood would affect the light in his shots and you replied " Not at all" (top of page 2 of this thread).

You did, though, risk and get the reduced contrast which is an effect of light hitting the lens at the extreme angle.

No it isn't, the change in contrast is nothing to do with the angle of the light, just the fact that there was more light. If there had been flare, that would have been because of the light hitting at an "extreme angle" as you put it. Also I didn't risk anything I knew exactly what would happen. I did take the risk that you might be able to understand that the colour and contrast properties of the two pictures would be different and that this difference isn't a negative.

Thoroughly confused. We've been over this--hoods only block the light outside the angle of view in order to avoid harsh effects that most people don't want. That's it.

Ok here is the diagram you posted earlier.

tut_lensflare_hooddiag.png

See the light from the sun, which is outside the angle of view, that is still part of the picture. I'll say it again. Perhaps with the diagram you'll get it this time.

It is impossible to take a picture with light only entering from the angle of view.

Hoods are not special flare filters. They also block other things, things you might want. I consider something that will block something I want in a picture a negative effect. Therefore hoods can have a negative effect.

Just because you don't understand what these things are or why you would want them, even though I've tried to explain them and given examples, doesn't mean you can make the statement that hoods have no negative effect.

Just as I'm not making the statement that hoods only have a negative effect.

I'll try another example. There is a lovely orange sunset. I want to take a picture that captures as much of this wonderful burnt orange colour as possible. I position myself and frame my shot in such a way that there will be no flare. I don't care about having a higher contrast range. I just want to capture as much of this colour as possible. A hood is only going to have a negative effect in this case.

I didn't ask you to judge the best photo. The point I was making was that depending on what you wanted from a photo either can be the best one.

No this does not display a contrast problem. Also there is not just a contrast difference but also a colour difference. It displays how in a very simple test, that you can reproduce yourself, that a lens hood affects a photo. This differing contrast and also differing colour might be what you want in a picture. There was no post-processing. Just shot and hosted. You're quite happy to use them to try and support your argument.

Now it's color problem? First you say "The hood did improve contrast" and now it's a color problem and not a contrast problem? As far as I can tell, both of the colors are in the same range and tonality. On your sample pic, yes, the difference is very negligible. But time and time again I have experienced flare and unwanted lack of contrast due to strays of light hitting my front element.

You can't say that. I just gave you a specific example (sunny day one) of a kind of picture you might want to take where a hood will have a negative effect.

Also maudit asked if a hood would affect the light in his shots and you replied " Not at all" (top of page 2 of this thread).

For specific situations where you "want" flare, I'll give that to you. If that's your intention--go right ahead. I was just stating the fact that a hood does not bring in adverse flaws in your photos in the context that you don't want them.

I replied to maudit in the context of "wanted" light. (again, in the sense that you specifically don't want flare) If I read him right, I assumed he was asking if it affected his exposure, which it does not.

No it isn't, the change in contrast is nothing to do with the angle of the light, just the fact that there was more light. If there had been flare, that would have been because of the light hitting at an "extreme angle" as you put it. Also I didn't risk anything I knew exactly what would happen. I did take the risk that you might be able to understand that the colour and contrast properties of the two pictures would be different and that this difference isn't a negative.

That argument would make sense if your exposure settings were different, but they weren't and the camera metered exactly the same for both pictures. Extraneous light from extreme angles can have more affects than just flare, mind you.

First paragraph from the Cambridge in Color link:

Lens flare is created when non-image forming light enters the lens and subsequently hits the camera's film or digital sensor. This often appears as a characteristic polygonal shape, with sides which depend on the shape of the lens diaphragm. It can lower the overall contrast of a photograph significantly and is often an undesired artifact, however some types of flare may actually enhance the artistic meaning of a photo. Understanding lens flare can help you use it--or avoid it--in a way which best suits how you wish to portray the final image.

See the light from the sun, which is outside the angle of view, that is still part of the picture. I'll say it again. Perhaps with the diagram you'll get it this time.

It is impossible to take a picture with light only entering from the angle of view.

You're misinterpreting the diagram.

The light that is arriving to the lens from outside the angle of view is strictly NOT part of the picture--the lens can't capture light from the part of the image it has no access to. It's a simple matter of focal length and field of view--you're only going to see that light hit the object you're photographing. The picture is the object or scene your camera and lens is pointed at. Whatever that is, that light will get absorbed by your sensor just fine.

The light that is blocked in the diagram is stray light that is hitting directly at your front lens element which causes the problems. The source of the stray light, whether it be the sun or an artificial one, will light the object you're capturing perfectly fine. But the stray light itself has no bearing on the lighting of your object--it hits your lens, not the object which you're capturing.

Hoods are not special flare filters. They also block other things, things you might want. I consider something that will block something I want in a picture a negative effect. Therefore hoods can have a negative effect.

Just because you don't understand what these things are or why you would want them, even though I've tried to explain them and given examples, doesn't mean you can make the statement that hoods have no negative effect.

Just as I'm not making the statement that hoods only have a negative effect.

And yet again you bring up the point that sometimes you might want flare. And again, I've already stated that I understand that and have no problem with it. I have no idea why you're bringing this up again.

I'll try another example. There is a lovely orange sunset. I want to take a picture that captures as much of this wonderful burnt orange colour as possible. I position myself and frame my shot in such a way that there will be no flare. I don't care about having a higher contrast range. I just want to capture as much of this colour as possible. A hood is only going to have a negative effect in this case.

Thanks for the good laugh. :laugh: You don't care about a higher dynamic range--that's silly. A hood isn't going to block any color from you either. Seriously now, you can ask anyone this and they'll say the same. I can bet you that 95% or more of landscape photographers (ultra-wide angle) use a hood that was supplied with their lens.

I've done countless landscape shots all with a hood which had no effect whatsoever with "reducing colors". That's a first for me.

Now it's color problem? First you say "The hood did improve contrast" and now it's a color problem and not a contrast problem? As far as I can tell, both of the colors are in the same range and tonality. On your sample pic, yes, the difference is very negligible. But time and time again I have experienced flare and unwanted lack of contrast due to strays of light hitting my front element.

Did I say it was a colour problem? NO. Did I say it was a contrast problem? NO. The pictures colour and contrast are not the same and the histograms are not the same. Difference != problem. Yes it's negligible but this was a quick and dirty test with a bulb in my study (not a big light source like say the sun). In response to.

What light are you talking about then? Other than flare, what other light is it that you're missing when you put the hood on?

For the most part, it doesn't have an effect. If you'd like to show me some tests yourself, feel free.

That argument would make sense if your exposure settings were different, but they weren't and the camera metered exactly the same for both pictures. Extraneous light from extreme angles can have more affects than just flare, mind you.

First paragraph from the Cambridge in Color link:

Lens flare is created when non-image forming light enters the lens and subsequently hits the camera's film or digital sensor. This often appears as a characteristic polygonal shape, with sides which depend on the shape of the lens diaphragm. It can lower the overall contrast of a photograph significantly and is often an undesired artifact, however some types of flare may actually enhance the artistic meaning of a photo. Understanding lens flare can help you use it--or avoid it--in a way which best suits how you wish to portray the final image.

Way to miss quote. Again did my picture without a hood have any kind of lens flare on it? NO. Was it different from the hooded picture? YES.

You're misinterpreting the diagram.

The light that is arriving to the lens from outside the angle of view is strictly NOT part of the picture--the lens can't capture light from the part of the image it has no access to. It's a simple matter of focal length and field of view--you're only going to see that light hit the object you're photographing. The picture is the object or scene your camera and lens is pointed at. Whatever that is, that light will get absorbed by your sensor just fine.

The light that is blocked in the diagram is stray light that is hitting directly at your front lens element which causes the problems. The source of the stray light, whether it be the sun or an artificial one, will light the object you're capturing perfectly fine. But the stray light itself has no bearing on the lighting of your object--it hits your lens, not the object which you're capturing.

If the light is coming into the lens and arriving at the sensor then it is part of the picture regardless of what it's doing to the object. End of story.

And yet again you bring up the point that sometimes you might want flare. And again, I've already stated that I understand that and have no problem with it. I have no idea why you're bringing this up again.

No I did not a say sometimes you might want flare in the bit you're quoting. The concept you can't seem to grasp is that: Not all light from outside the angle of view is flare and that not all light from outside the angle of view is unwanted.

Thanks for the good laugh. :laugh: You don't care about a higher dynamic range--that's silly. A hood isn't going to block any color from you either. Seriously now, you can ask anyone this and they'll say the same. I can bet you that 95% or more of landscape photographers (ultra-wide angle) use a hood that was supplied with their lens.

I've done countless landscape shots all with a hood which had no effect whatsoever with "reducing colors". That's a first for me.

No you're making me laugh. We've established that a hood stops light coming into a lens and being part of a picture. Yet you still think that a hood doesn't stop light coming into your lens. I've even given you two example photos of this and still you can't wrap your brain around this concept.

I'll say it one last time in the hope that it sinks in.

Not all light from outside the angle of view is unwanted, not all light from outside the angle of view is flare. If you put a lens hood on you are effecting the lighting of your picture (that's what it's designed to do). Whether this is a positive or negative effect depends on the picture you are taking. But you CAN NOT make the statement that hoods don't have a negative effect.

Dude, I meant go OUTSIDE and take pictures. Don't aim your camera at your ceiling that's 3 feet away... lol

Yeah I know and of the manky celling in here. However it's chucking it down outside with 60mph winds. Not great photography weather. However I did do something that proves there is a difference.

giga Better setup than I did but I was supposed to be working so I couldn't spend too long on it.

However I'm afraid you just shot yourself in the foot. Yes it meters the same but look at the two histograms for the pictures. Big differences.

Look I don't want to keep going on about this but there are differences. Please listen to this bit of advice. There is more to the exposure of pictures than iso f-stops and shutter speeds. You have just proved that. If there wasn't the two pictures would be exactly the same, but they're not.

Yes in that situation the hood is good because it gives you a better contrast. Do you have a red bulb? If you do repeat and you will find that the non-hooded image not only has less contrast but also more red. Which is what I was trying to explain with the sunset example. You might want to catch this light so the photo more representative of its surroundings (does that make sense?)

Try thinking about the light generally rather than just the light that's hitting the object you're photographing.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • BATorrent 4.1.0 by Razvan Serea BATorrent is a lightweight, open-source BitTorrent client built with modern C++ and Qt 6, offering a clean, fast, and privacy-focused alternative to traditional torrent apps. It supports magnet links, .torrent files, resume data, sequential downloading, per-file priorities, and even imports from qBittorrent. Power users benefit from integrated RSS auto-download with regex filtering, duplicate detection, and automatic tracker lists from Stremio. Streaming is seamless thanks to auto-detected players like VLC and IINA. BATorrent includes robust VPN tools—interface binding, auto-detection for WireGuard-based services like Mullvad and NordLynx, kill switch, proxy support, and IP filtering. A full WebUI enables remote control, while integrations with Plex, Jellyfin, and Emby automate library updates. With themes, speed scheduling, system-tray alerts, and cross-platform support for Windows, Linux, and macOS, BATorrent delivers a polished, high-performance torrenting experience. BATorrent features: Core .torrent file and magnet link support Resume data — picks up where you left off after restart Import torrents from qBittorrent Create .torrent files from any file or folder Sequential download mode Per-file priority control (skip, low, normal, high) Seed ratio limits with auto-pause DHT, PEX, UPnP, NAT-PMP RSS Auto-Download Subscribe to RSS feeds — automatically download new torrents as they appear Regex filters — match only what you want (e.g. 1080p|720p, S01E\d+) Per-feed settings — custom save path, check interval (5–1440 min), enable/disable Auto-download — matched items are downloaded automatically in the background Supports magnet links, .torrent URLs, and tags Tray notifications when items are auto-downloaded Duplicate detection — never downloads the same item twice Stremio Stremio Addon System pre-installed — works out of the box Auto tracker list from ngosang/trackerslist Streaming Play while downloading — stream video files before the download is complete Supports mp4, mkv, avi, mov, wmv, flv, webm, m4v, ts Auto-detects installed players (VLC, IINA, system default) VPN & Privacy Interface binding — lock torrent traffic to a specific network interface (e.g. tun0) Auto VPN detection — identifies VPN interfaces (tun, tap, WireGuard, Mullvad, NordLynx, ProtonVPN) Kill switch — automatically pauses all torrents if the VPN interface drops Auto-resume — resumes only the torrents paused by the kill switch when VPN reconnects Proxy support — SOCKS5 and HTTP proxy with optional authentication IP filtering — load P2P blocklists to block unwanted IP ranges Protocol encryption (enabled / forced / disabled) WebUI Remote management — control torrents from any browser at http://localhost:8080 REST API with JSON responses Add torrents via magnet link or .torrent upload Pause, resume, remove torrents remotely View peers and files per torrent Dark theme matching the desktop app HTTP Basic Auth with SHA-256 password hashing Configurable port and remote access (localhost vs 0.0.0.0) Interface 3 themes: Dark, Light, Midnight (bat/vampire aesthetic) Real-time speed graph Detailed panel with tabs: General, Peers, Files, Trackers Filter bar: search by name, filter by state (Active, Downloading, Seeding, Paused, Finished) Drag & drop .torrent files and magnet links Drag & drop reorder in torrent list System tray with notifications (download complete, kill switch events, RSS auto-downloads) Splash screen with bat animation Bilingual: English and Portuguese (BR), auto-detected from system locale Bandwidth Scheduler Alternative speed limits — set different download/upload limits on a schedule Time range — configure active hours (e.g. 01:00 to 07:00), supports overnight ranges Per-day control — choose which days of the week the schedule applies Automatically switches between normal and alternative speeds Media Server Integration Plex — automatically trigger library scan when a download completes Jellyfin / Emby — same automatic library refresh via API Configure server URL and authentication token/key in Settings System Cross-platform: Windows, Linux, macOS Auto-shutdown — automatically shut down PC when all downloads complete (60s cancellable countdown) Auto-update system (AppImage on Linux, installer on Windows, DMG on macOS) CLI arguments: pass .torrent files or magnet: URIs directly Keyboard shortcuts: Space to toggle pause, Ctrl+A to select all, Ctrl+O to open BATorrent 4.1.0 release notes: A community-driven release: everything here came straight from your reports and requests. It closes the remaining gaps with qBittorrent and fixes the Windows settings/tray/splash issues several of you hit. Fixed Settings now actually save. A whole class of preferences — speed limits (and the alternative limits), max active downloads, seed ratio, listen port, max connections, DHT/uTP/encryption, VPN interface, kill switch and proxy — weren't being persisted and reset to defaults on every launch. They now round-trip correctly. (Thanks to everyone who reported "the upload limit always goes back to 0".) Splash and tray toggles stick on Windows. Turning off the startup animation (or "close to tray") no longer reverts — the Windows registry stored these booleans as integers and the UI was misreading them. Close-to-tray hint. The first time the window hides to the tray you get a one-time notification, so the app doesn't look like it vanished (Windows 11 tucks new tray icons into the overflow). macOS Dock icon size. The icon filled its canvas edge-to-edge and rendered larger than neighbouring apps; it now uses the standard safe-area padding. Native file picker language. The "Torrent file / All files" filter in the open dialog follows the app language instead of being hard-coded. Added — qBittorrent parity Alternative speed limits toggle — a turtle button in the toolbar flips your throttled limits on/off instantly, independent of the scheduler. Follow system theme — switch light/dark automatically with the OS (Settings → Appearance). Pre-allocate disk space — reserve the full file size up front to reduce fragmentation (Settings → Downloads). Recheck data on add — optionally force a hash check when adding a torrent, so existing or partial files on disk are detected. Port status indicator — a 🔴 dot in the status bar shows whether your listen port looks reachable (UPnP/NAT-PMP + listen state; fully local, no external check). Add torrent from URL — File → Add torrent from URL (Ctrl+U) fetches a remote .torrent and routes it through the normal add dialog. Export .torrent — right-click a torrent → Export .torrent to save its metadata file. Already there (in case you missed it) Watch folder — auto-add .torrent files dropped into a monitored directory (Settings → Files). This release just surfaces it. Incomplete files already carry a .!bt suffix until they finish. Under the hood Regression tests for the settings-persistence and Windows boolean bugs. A new Qt Quick Test harness covering the startup splash and the design-system widgets. Download: BATorrent 4.1.0 | 37.5 MB (Open Source) Download: BATorrent Portable | 51.7 MB Links: BATorrent Website | Screenshot | Changelog Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Disabling open on hover, great! That was so stupid! They need to do a fix, where if a network share is disconnected, it doesn't hang when opening "This PC" for 20 seconds.
    • Microsoft releases major feature updates for stock Windows 11 apps by Taras Buria In addition to releasing new Windows 11 preview builds, Microsoft announced that inbox Windows apps now have dedicated release notes in the official documentation. At long last, users have access to all the release notes for each app, with changes listed in chronological order. Microsoft used to announce feature updates for stock apps with each build. Now, with Windows Insider release notes hosted on the Microsoft Learn website, each app has a dedicated space for its changelog, which is very useful for those who want to track new features and improvements. Alongside that, Microsoft dropped massive feature updates for six stock apps: Clock, Media Player, Calculator, Voice Recorder, Photos, and Paint. Each app packs quite a lot of changes and new capabilities, so here are the release notes. Here are quick notes so that you can jump to the app you are interested in the most: Calculator Camera Clock Media Player Paint Photos Sound Recorder Here is what is new for the Calculator in version 11.2605.9.0: More accurate square-root results — Fixed rare cases where a calculation that should equal zero (like sqrt(2.25) - 1.5) returned a tiny leftover value instead. Readable text in High Contrast themes — Settings text now shows the correct colors in the High Contrast Aquatic and Desert themes. Fixed layout for right-to-left languages — For languages like Arabic and Hebrew, the graph, number pad, equation fields, and scroll buttons now appear correctly oriented. Reliable launch after upgrading — Fixed an issue where upgrading from much older versions could leave outdated settings that stopped the app from opening. Here is what is new for the Camera app (version 2026.2605.7.0): Zoom slider works on more cameras — The zoom slider now works on the latest cameras, respects your system zoom settings, and updates instantly when you change those settings. Full range of zoom levels — Fixed an issue where the zoom slider only showed three steps on some devices that zoom in finer increments. Front camera works on more devices — Resolved a problem that blocked the front-facing camera on certain wide-angle devices. More video resolution choices — You can now pick video resolutions that were previously hidden; the app shows a heads-up warning instead of removing them. QR links you can still use — When a scanned QR code points to something with no matching app, the link is now copied to your clipboard (with a notification) while still offering a Store search. Smarter default settings — When you haven't set a preference, the app now follows your system settings by default. The Clock app has a massive changelog with the following improvements in version 11.2605.9.0: Timers keep counting after they hit zero — When a timer runs out, it now keeps counting up (for example, -00:27:31) so you can see how far past the time you've gone. You can turn off the daily goal — Focus Sessions now include an "Off" option so you can skip setting a daily goal entirely. New 15-minute snooze option — Alarms now offer a 15-minute snooze interval. Run up to 3 countdowns at once — The Countdown Widget now supports three simultaneous countdowns, up from two. Timer Widget notifications now appear — Fixed an issue where the "timer finished" notification didn't show when the timer was started from the widget. Less clutter in Focus Sessions — Tasks you've already completed no longer show up in the Focus Session task list. More accurate focus progress — Fixed a rounding issue that could show your daily focus progress as a minute short (for example, 49 minutes instead of 50). Smoother World Clock comparisons — The World Clock compare page now loads dates as you scroll, so it feels more responsive. Up-to-date World Clock locations — Refreshed country and city names to match their current names. Correct sun and moon icons during midnight sun — Fixed an icon that wrongly showed a moon during all-day daylight in polar regions. Fixed back-button behavior in clock comparisons — Pressing back once now takes you back as expected, instead of jumping the date to 1926. Corrected the Newfoundland time zone — Newfoundland now uses the right time zone (St. John's). Disabled alarms stay looking disabled — Editing a turned-off alarm no longer makes it appear turned on. Cleaner timer cards — The expand button is now turned off on timer cards that have no time set, preventing actions that wouldn't do anything. Clearer theme setting — Updated the wording to "Choose your preferred app theme." Smoother Settings links — The "About" links in Settings no longer trigger an unexpected "switch apps" prompt. Fixed spacing in Spotify settings — Corrected uneven spacing in the Spotify settings card. Better focus visibility in High Contrast — The focus highlight in World Clock is now clearly visible in the High Contrast Aquatic and Desert themes. No more double announcements — Screen readers no longer read the timer value twice. Countdown names read correctly — Screen readers now properly announce the name of each countdown. Keyboard focus stays put — Focus no longer disappears after you press the Timer Reset button. Clearer alarm toggle for screen readers — Tidied up how the alarm on/off switch is announced. The Media Player app received plenty of changes as well (version 11.2605.14.0): Custom captions — You can now personalize how closed captions appear, with caption styling tied to your Windows caption settings, plus a quick link to open those settings directly. "Indexing" banner in the play queue — When your media library is still being scanned, a banner now explains why some items may not appear yet. Fixed the look of selected items — Corrected a layout glitch with selected items in lists. Fewer playback failures — Improved how the app recognizes supported file types, so more files play without issues. Playlists need a name — You can no longer accidentally save a playlist with a blank name. Cleaner look for empty playlists — Improved how a playlist appears when it has no items yet. More stable play queue edits — Fixed a crash that could happen when changing the play queue while the app was switching between sessions. Clearer "missing codec" message — Improved the dialog that appears when a file needs a codec you don't have, with clearer guidance on what to do. A big update is also available for Paint in version 11.2605.61.0: Adjustable eraser transparency — You can now control how transparent the eraser is. Cleaner stamp brush strokes — Fixed visible color shifts and artifacts when using stamp-style brushes. JPEG photos save in place — Opening a rotated JPEG and pressing Save now overwrites the original instead of unexpectedly prompting "Save As." No more crash on bad image files — Opening a damaged or invalid image, from within the app, by double click, or commandline, now shows a clear error message instead of closing the app. Classic selection behavior restored — The selection outline now hides while you move, resize, or rotate a selection, just like in classic Paint. Tidier AI image panel — Fixed missing spacing at the bottom of the AI image generation panel for a cleaner layout. Visible button hover in light theme — Toolbar split buttons now show a clear hover highlight in the light theme. Snappier toolbar — Streamlined how the ribbon lays out, giving a small speed boost at startup. Fewer background crashes — Fixed a crash that could happen while background tasks were finishing up. Stable app shutdown — Prevented rare crashes when closing the app. Fixed layer removal glitch — Deleting the active layer no longer leaves the layers list in an inconsistent state. Here is what is new in the Photos app (version 2026.11060.2004.0): AI watermarking — AI-generated or edited images can now carry a visible Copilot watermark. You choose Never, Always, or Ask Every Time in Settings, with a confirmation when saving. The watermarking is off by default in settings. Better viewing of small images and pixel art — Tiny images (like 16×16 pixel art) now zoom in far more to fill the screen and stay crisp instead of looking blurry. Select scanned text with the keyboard — When text is detected in an image, you can now navigate and select it using the arrow keys, Shift+Arrow, Home/End, and Ctrl+A, with a clear focus highlight. Fixed a crash in text recognition — Resolved a crash that could close Photos while detecting text in images; the app now recovers gracefully. Easier keyboard navigation — Tabbing through the navigation bar no longer stops on hidden controls, so it takes a single Tab to move past it instead of three. And finally, here is the Sound Recorder (version 11.2605.1.0): Waveform shows with Bluetooth mics — The live waveform now displays correctly when you record using a Bluetooth audio device. No more stray scrollbar — A non-working horizontal scrollbar no longer appears at the bottom of the waveform unless you've zoomed in. Mark button ready right away — The Mark button no longer looks grayed out until you hover over it after opening the app. Markers hidden for WAV files — Markers are now turned off for WAV recordings, since that format can't store them — so they're no longer lost silently. Smoother deleting — Quickly pressing Delete and Enter to remove several recordings in a row no longer triggers a "file doesn't exist" error. Fixed a memory issue — Resolved a memory leak that occurred each time a recording started. You can find all these changelogs in the official documentation here.
    • again, an article about Microsoft Edge and ridicules hater's comments
    • From this very same article: "For organizations that prefer a “more deliberate pace”, the Extended Stable channel remains an option."
  • Recent Achievements

    • AndrewSteel earned a badge
      Very Popular
    • Taliseian went up a rank
      Veteran
    • Clizby earned a badge
      One Month Later
    • Timaximus earned a badge
      One Month Later
    • Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      515
    2. 2
      PsYcHoKiLLa
      170
    3. 3
      +Edouard
      162
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      78
  • Tell a friend

    Love Neowin? Tell a friend!