Let's talk Filters!


Recommended Posts

I use my hood all the time if I can. Never been a fan of filters, it seems like even the best ones will add flare to your images once in a while. Not sure why people are saying hoods are useless at night, they still block some stray light and still offer protection (even more important if you're fumbling around in the dark!) -- although they can be bad for flash photography if the hood casts shadows.

Yes, less light..eg. unnecessary light which will cause flare. The lens does only pick up light in its angle of view, its the stray light from the wider angles that cause the flare.

tut_lensflare_straylight.png

I'm not sure why you're saying not to use a hood? It won't negatively affect your image or exposure but will help for both protection and stray lights that can enter the lens. There is always a chance of flare indoors, depending on the situation--especially bright light sources and ones reflecting around the room. (Christmas time for example)

If a lens only picks up light in its angle of view then that picture is wrong and flare is impossible. The sun and the light coming from it are well outside the angle of view.

It will affect an image and should only be used when you have to. Photography is the capture of light. If there is no source for flare why limit the light you're capturing? A picture is not just composed of the things you see directly through the viewfinder. The surrounding conditions make a difference to the picture. What you're doing is throwing those out every time in case occasionally there is a flare source.

Not all light outside the angle of view = Bad light or flare.

The sun and light are outside of the angle of view, but are still hitting the front element.

Lens flare is caused by non-image light which does not pass (refract) directly along its intended path, but instead reflects internally on lens elements any number of times (back and forth) before finally reaching the film or digital sensor.

Ordinarily light which is outside the angle of view does not contribute to the final image, but if this light reflects it may travel an unintended path and reach the film/sensor. In the visual example with flowers, the sun was not actually in the frame itself, but yet it still caused significant lens flare.

I've been using hoods at night for a while now and it has had no negative affect on the image. Again, it's outside of the angle of view and does not block image light which is what your camera meters and captures. The surrounding conditions of light will light the object you're capturing just fine, you just don't want that surrounding light to hit your front element at the extreme angles which might cause flare.

*Face palm*

Look guys, lens hoods have been around forever. If they altered the quality of the images what so ever people wouldn't use them. But that's not the case. EVERYBODY ALWAYS says to keep the hood on for safety and to prevent any extra flares.

Really if hoods make no difference and only improve the image then why aren't primes manufactured with precision matched non-removable hoods?

Why do you see pros taking photos without hoods? Maybe one of you should tell them.

What a hood is made from is important, as is mentioned in one of your links, if a hood has no effect on the picture then why is this important? (unless you have a hood made out of those new carbon nano tubes that are the blackest black)

Ordinarily light which is outside the angle of view does not contribute to the final image, but if this light reflects it may travel an unintended path and reach the film/sensor.

Yes but all this light is not necessarily flare and not necessarily unwanted. Also if it's reaching the film/sensor it's part of the image. ;)

@crazzy88ss If EVERYBODY ALWAYS says this how come NOBODY in the articles giga links to says this?

Edited by monkey13

Sorry Mr Spoon I've just realised I haven't posted anything relevant on the filters thing.

That Hoya is fine. I've got the same one. It will make no noticeable difference to any of your pictures but it will protect your lens. Scratch that and you just buy another one. Costs a bit more if you scratch the lens.

The one you've linked to there is 52mm. The lens has a threaded end and it just screws in. Easy to put in and to remove if you want to use another filter.

What would be the point of non-removable hoods? That would be horrible for storage.

I can imagine a pro wouldn't use a hood in a controlled environment like a studio, but if they choose to use one out in the wild: more power to them. :laugh: Canon includes a hood in all their L lens and Sigma in their EX line--they do it for a reason. It's silly not to use it--they make them for a reason.

Here's some Art Wolfe if you want: http://www.usa.canon.com/dlc/controller?ac...&fromTips=1

Every single website have recommended to use a hood--hell I even took out my Canon and Sigma manuals and they said to use it as well to block unwanted light and for protection.

What it's made of is important so that the light doesn't reflect inside the hood itself onto the front element. Matte surfaces on the inside of the hood is best.

Yes but all this light is not necessarily flare and not necessarily unwanted.

If you're in sanctified's position and want it for the artistic quality, then sure. Otherwise, it is unwanted non-image forming light which will either cause flare, lower the contrast, etc.

Every single website have recommended to use a hood--hell I even took out my Canon and Sigma manuals and they said to use it as well to block unwanted light and for protection.

What it's made of is important so that the light doesn't reflect inside the hood itself onto the front element. Matte surfaces on the inside of the hood is best.

If you're in sanctified's position and want it for the artistic quality, then sure. Otherwise, it is unwanted non-image forming light which will either cause flare, lower the contrast, etc.

Every single website apart from one of the ones you linked.

http://www.vanwalree.com/optics/lenshood.html

There are many occasions where a lens hood does not add to the image quality.

Guess what the inside of your hood is not a perfect non-reflective surface. So it is having and effect on the picture. If you don't need it to stop flare why put it there?

"non-image forming light " What? If it's non-image forming (whatever that is) then it's having no effect on my picture.

You're confusing unwanted light, flare, with light from outside the angle of view. They are not the same thing and not both always bad (you may want a flare photo). Then you're advising people that the hood will make no difference to the picture. Of course it does. It's whether you're bothered enough about this to remove the hood. Personally I only put mine on when there is flare I don't want.

Yes, a hood won't suddenly make your image better. It will though help from reducing the image quality that you can get from unwanted light.

Why are we onto talking about my lens hood now? :laugh: I'm sure it's not a perfectly non-reflective surface, but its not reflective by any means and not degrading my IQ. Again, if I don't use it to stop flare, I use it anyway for the added protection.

I've already explained non image forming light above and its effects on your picture:

Lens flare is caused by non-image light which does not pass (refract) directly along its intended path, but instead reflects internally on lens elements any number of times (back and forth) before finally reaching the film or digital sensor.

Ordinarily light which is outside the angle of view does not contribute to the final image, but if this light reflects it may travel an unintended path and reach the film/sensor. In the visual example with flowers, the sun was not actually in the frame itself, but yet it still caused significant lens flare.

You're confusing unwanted light, flare, with light from outside the angle of view. They are not the same thing and not both always bad (you may want a flare photo). Then you're advising people that the hood will make no difference to the picture. Of course it does. It's whether you're bothered enough about this to remove the hood. Personally I only put mine on when there is flare I don't want.

Flare is not a type of light, it's the effect of the light hitting from outside the angle of view onto the lens. Sure, it's not bad if you actually want that effect, but otherwise it is. (and as far as I know, most people don't want flare/glare/etc)

What negative ways is the hood affecting picture?

By the way, you took that sentence from the linked website out of context:

Lens hoods are often undervalued and considered impractical because of the space they require in the camera bag. Too often I notice photographers with the best lenses money can buy, but who employ them without lens hood - or tripod for that matter. They will either say that a lens hood is impractical or that their lens is so good that it does not need a hood. As to the last reason, that one is plainly wrong. There are many occasions where a lens hood does not add to the image quality, but there are also many occasions where it does - even with the best lenses. IMHO, a proper lens hood should be among the standard equipment of the serious photographer. An adjustable bellows lens hood (compendium) is a very flexible solution for field work with a tripod, when prompt action is of no concern. One compendium hood serves a battery of lenses. In a ready-to-shoot shoulder bag outfit each lens is best equipped with an individual hood. Any hood, even if it is imperfect, is better than no hood at all.

Here we go.

Yes, a hood won't suddenly make your image better. It will though help from reducing the image quality that you can get from unwanted light.

ARGGHHH. This seems to be a concept you can't grasp. Not all light from outside the angle of view is unwanted light but you're throwing it away every time. Also not all light from outside the angle of view is flare.

Why are we onto talking about my lens hood now? :laugh: I'm sure it's not a perfectly non-reflective surface, but its not reflective by any means and not degrading my IQ. Again, if I don't use it to stop flare, I use it anyway for the added protection.

You are. If you don't care about this that's ok I'm just saying don't go round telling people it has no effect.

I've already explained non image forming light above and its effects on your picture:

Lens flare is caused by non-image light which does not pass (refract) directly along its intended path, but instead reflects internally on lens elements any number of times (back and forth) before finally reaching the film or digital sensor.

Ordinarily light which is outside the angle of view does not contribute to the final image, but if this light reflects it may travel an unintended path and reach the film/sensor. In the visual example with flowers, the sun was not actually in the frame itself, but yet it still caused significant lens flare.

This whole bit you keep posting is wrong. I was hoping you'd picked up on that. How can it be non-image light and yet still reach to film or digital sensor (the image)? This is a direct contradiction. I'll assume you mean unwanted light.

Light outside the angle of view does contribute to the image. I thought we had already established that. If it didn't flare would be impossible and once again not all light from outside the angle of view is unwanted light.

Flare is not a type of light, it's the effect of the light hitting from outside the angle of view onto the lens. Sure, it's not bad if you actually want that effect, but otherwise it is. (and as far as I know, most people don't want flare/glare/etc)

Did I say flare was a type of light? That definition is incorrect. It's light above a certain intensity hitting the lens at a certain angle and refracting/reflecting within the lens into the image.

What negative ways is the hood affecting picture?

You are stopping light coming into the camera. A picture is more than just what you frame in the viewfinder.

By the way, you took that sentence from the linked website out of context:

An article about lens hoods that you posted. That says that a lens hood is not needed for every photo. Sounds very in context to me.

Guess what even with a hood on every time you are still getting light from outside your angle of view. The only good thing hood does (image wise) is stop light coming in at the critical angles that cause flare. If there is no light source to flare then the hood is only having a decremental effect.

ARGGHHH. This seems to be a concept you can't grasp. Not all light from outside the angle of view is unwanted light but you're throwing it away every time. Also not all light from outside the angle of view is flare.

What light are you talking about then? Other than flare, what other light is it that you're missing when you put the hood on?

You are. If you don't care about this that's ok I'm just saying don't go round telling people it has no effect.

For the most part, it doesn't have an effect. If you'd like to show me some tests yourself, feel free.

This whole bit you keep posting is wrong. I was hoping you'd picked up on that. How can it be non-image light and yet still reach to film or digital sensor (the image)? This is a direct contradiction. I'll assume you mean unwanted light.

Light outside the angle of view does contribute to the image. I thought we had already established that. If it didn't flare would be impossible and once again not all light from outside the angle of view is unwanted light.

Non-image light is the light that is not metered/exposed for when you capture the image. This is the whole concept of a lens angle of view. Light outside of its angle of view won't contribute to the image in the sense of the light needed for the exposure to the sensor. It will negatively add to the image in the fact that it usually adds lens flares, blobs, or decreased contrast.

You seem to think that light from outside the angle of view of the lens matters for the exposure of the object you're capturing. It strictly does not since that light won't be coming directly in contact within the focal place depending on your lens. This is why long telephoto lens have larger and longer hoods while wide angles lens or fisheyes have very small ones. (angle of view is wider for UWA, smaller for telephoto)

You are stopping light coming into the camera. A picture is more than just what you frame in the viewfinder.

Yes, unwanted light. The light from outside of the angle of view does not matter for the exposure and metering of the image. Viewfinders are increasingly accurate--a 100% frame viewfinder will show you what you will get in your image. (save for dynamic range which is dependent on your sensor)

Seriously now. Take your lens right now and put the hood on and off in several different lighting situations. It does not affecting the exposure at all.

An article about lens hoods that you posted. That says that a lens hood is not needed for every photo. Sounds very in context to me.

Guess what even with a hood on every time you are still getting light from outside your angle of view. The only good thing hood does (image wise) is stop light coming in at the critical angles that cause flare. If there is no light source to flare then the hood is only having a decremental effect.

Are you joking with me? I honestly don't know. :laugh: The article can't recommend hoods more than enough. Of course there are situations where flare won't be a problem--I've stated that already. The reason I suggested a hood though is for the added protection.

If there is no light source to flare then the hood is only having a decremental effect.

Really? I'd like to see that. You're confusing yourself with angle of views and the exposure of an image.

Of course if you decided to use the Canon 1200mm lens hood with an 8mm fisheye, you'd be losing wanted light. :rofl: Hoods are specifically designed for the manufactured lens according to their angle of view, and will not affect your light needed for the image exposure.

Hey monkey. Why don't you SHOW us some examples of when a lens hood would REDUCE image quality. Or how not having a hood HELPED the image quality.

And to cover all of the times you say "what if you WANT a lens flare", all I have to say is TAKE OFF THE HOOD! That's why they're removable...

You're a brave soul, giga.

First did I ever say having a hood on all the time "reduces image quality" (whatever that means)? No what I said is that having a hood on all the time effects the pictures you're taking.

A lens hood may have no effect on exposure values, and I'm willing to bet you mean f-stops and shutter speeds when you say exposure. So following on from my first piece of camera wisdom (A photo is more than just what you see in the viewfinder). I'll impart as second. The exposure of a picture is more than just f-stops and shutter speeds. Do you think maybe the colour of the light might have an effect on the picture?

Have a look at these two pictures taken quickly in my study just now with a bulb just out of shot (ignore the hideous artex ceiling it was like that when we moved in). You can try this yourself.

1. No lens hood iso800 31mm f4.0 1/30s

imgp0125md3.jpg

hist2ps9.jpg

2. Lens hood on iso800 31mm f4.0 1/30s

imgp0124eu9.jpg

hist1do7.jpg

See any difference? Maybe in the colour and the histograms? This was just a quick and dirty example as well.

If you want to continue with the ridiculous belief that a piece of kit designed to stop light entering the lens, has no effect on the light entering the lens. You can, just don't try to convince other people of this.

Hmn. Sounds familiar are you guys religious or Scientologists?

The second picture with the hood on has a higher contrast compared to the one without one. Your histogram is also showing a wider dynamic range (shadows/midtones) that is captured with the hood. Looks like the hood did help you out.

Again, we're trying to say that having a proper hood on does not negatively effect your image. The hood is not going to block light from hitting your subject that you're capturing, just the stray lights that will hit and reflect off your lens internals which causes things such as flare and contrast problems like you just demonstrated above.

Light particles do not bend--if you photograph a subject--let's say an apple located right in front of you. The apple is lighted from a lamp that's out of the frame of view. The hood isn't going to stop from lighting that apple, the wall behind it, or anything around it. It's only going to stop the light coming in to the lens from the extreme angles that cause the problems already stated.

If you want to continue with the ridiculous belief that a piece of kit designed to stop light entering the lens, has no effect on the light entering the lens. You can, just don't try to convince other people of this.

What? We've been saying all along that hoods block the light entering outside of the angle of view of the lens. Several diagrams have been posted as well.

And no, I'm not a Scientologist? Are you? Does it matter?

What light are you talking about then? Other than flare, what other light is it that you're missing when you put the hood on?

For the most part, it doesn't have an effect. If you'd like to show me some tests yourself, feel free.

I've just proved it does have and effect and you are loosing light at least admit that.

The hood did improve contrast but is that the best photo? What if I don't want to improve contrast but want a picture that gives more of a general idea of lighting? These pictures do not display a contrast problem but how a hood effects a picture.

Also you've changed your argument now from " a hood has no effect" to " a hood has no negative effect", following me proving you were wrong first time. This is still an incorrect argument.

If I want improved contrast or to avoid flare then I'd use a hood, but what if it's a lovely sunny day and rather than have better contrast I want to capture the colour of the sun and it's effect on lighting my picture and the surroundings (without the sun in shot)? Why would I use a hood? It would be having a negative effect on the kind of picture I want to take.

Light particles do not bend--if you photograph a subject--let's say an apple located right in front of you. The apple is lighted from a lamp that's out of the frame of view. The hood isn't going to stop from lighting that apple, the wall behind it, or anything around it. It's only going to stop the light coming in to the lens from the extreme angles that cause the problems already stated.

Actually light can bend but that's a discussion for another time. We'll assume we're both not taking photos in extreme gravitational circumstances. :p

I've already proven that this is not the case and given you an example of how hoods can effect an image. Notice that neither of the two pictures I posted had flare. Yet they were different. Therefore the hood is stopping more that just the light that causes flare.

What? We've been saying all along that hoods block the light entering outside of the angle of views. Several diagrams have been posted as well.

Not all light in a picture is from the angle of view. It is impossible to take a picture with light only entering from the angle of view. You've proven this yourself have a look back at your earlier diagrams.

I've just proved it does have and effect and you are loosing light at least admit that.

The hood did improve contrast but is that the best photo? What if I don't want to improve contrast but want a picture that gives more of a general idea of lighting? These pictures do not display a contrast problem but how a hood effects a picture.

Also you've changed your argument now from " a hood has no effect" to " a hood has no negative effect", following me proving you were wrong first time. This is still an incorrect argument.

If I want improved contrast or to avoid flare then I'd use a hood, but what if it's a lovely sunny day and rather than have better contrast I want to capture the colour of the sun and it's effect on lighting my picture and the surroundings (without the sun in shot)? Why would I use a hood? It would be having a negative effect on the kind of picture I want to take.

Best photo? I can't judge that--it was your own testing conditions and I have no idea what post processing you might or could apply. How does it not display a contrast problem though? Problems with light entering at extreme angles include decreased contrast and your tests just proved that.

Also you've changed your argument now from " a hood has no effect" to " a hood has no negative effect", following me proving you were wrong first time. This is still an incorrect argument.

:s From the very first page, my response:

I'm not sure why you're saying not to use a hood? It won't negatively affect your image or exposure but will help for both protection and stray lights that can enter the lens. There is always a chance of flare indoors, depending on the situation--especially bright light sources and ones reflecting around the room. (Christmas time for example)

If I want improved contrast or to avoid flare then I'd use a hood, but what if it's a lovely sunny day and rather than have better contrast I want to capture the colour of the sun and it's effect on lighting my picture and the surroundings (without the sun in shot)? Why would I use a hood? It would be having a negative effect on the kind of picture I want to take.

:rofl: What? If you want to risk flare or reduced contrast, then sure go for it. A hood won't prevent you from taking natural looking shots though and it seems a bit silly that you put forth your argument for this which I already accepted from sanctified on the very first page.

I've already proven that this is not the case and given you an example of how hoods can effect an image. Notice that neither of the two pictures I posted had flare. Yet they were different. Therefore the hood is stopping more that just the light that causes flare.

You won't get flare on every image, of course not. That's dependent on many factors--lighting, lens, etc. You did, though, risk and get the reduced contrast which is an effect of light hitting the lens at the extreme angle.

Not all light in a picture is from the angle of view. It is impossible to take a picture with light only entering from the angle of view. You've proven this yourself have a look back at your earlier diagrams.

Thoroughly confused. We've been over this--hoods only block the light outside the angle of view in order to avoid harsh effects that most people don't want. That's it.

Best photo? I can't judge that--it was your own testing conditions and I have no idea what post processing you might or could apply. How does it not display a contrast problem though? Problems with light entering at extreme angles include decreased contrast and your tests just proved that.

I didn't ask you to judge the best photo. The point I was making was that depending on what you wanted from a photo either can be the best one.

No this does not display a contrast problem. Also there is not just a contrast difference but also a colour difference. It displays how in a very simple test, that you can reproduce yourself, that a lens hood affects a photo. This differing contrast and also differing colour might be what you want in a picture. There was no post-processing. Just shot and hosted. You're quite happy to use them to try and support your argument.

:s From the very first page, my response:

I'm not sure why you're saying not to use a hood? It won't negatively affect your image or exposure but will help for both protection and stray lights that can enter the lens. There is always a chance of flare indoors, depending on the situation--especially bright light sources and ones reflecting around the room. (Christmas time for example)

You can't say that. I just gave you a specific example (sunny day one) of a kind of picture you might want to take where a hood will have a negative effect.

Also maudit asked if a hood would affect the light in his shots and you replied " Not at all" (top of page 2 of this thread).

You did, though, risk and get the reduced contrast which is an effect of light hitting the lens at the extreme angle.

No it isn't, the change in contrast is nothing to do with the angle of the light, just the fact that there was more light. If there had been flare, that would have been because of the light hitting at an "extreme angle" as you put it. Also I didn't risk anything I knew exactly what would happen. I did take the risk that you might be able to understand that the colour and contrast properties of the two pictures would be different and that this difference isn't a negative.

Thoroughly confused. We've been over this--hoods only block the light outside the angle of view in order to avoid harsh effects that most people don't want. That's it.

Ok here is the diagram you posted earlier.

tut_lensflare_hooddiag.png

See the light from the sun, which is outside the angle of view, that is still part of the picture. I'll say it again. Perhaps with the diagram you'll get it this time.

It is impossible to take a picture with light only entering from the angle of view.

Hoods are not special flare filters. They also block other things, things you might want. I consider something that will block something I want in a picture a negative effect. Therefore hoods can have a negative effect.

Just because you don't understand what these things are or why you would want them, even though I've tried to explain them and given examples, doesn't mean you can make the statement that hoods have no negative effect.

Just as I'm not making the statement that hoods only have a negative effect.

I'll try another example. There is a lovely orange sunset. I want to take a picture that captures as much of this wonderful burnt orange colour as possible. I position myself and frame my shot in such a way that there will be no flare. I don't care about having a higher contrast range. I just want to capture as much of this colour as possible. A hood is only going to have a negative effect in this case.

I didn't ask you to judge the best photo. The point I was making was that depending on what you wanted from a photo either can be the best one.

No this does not display a contrast problem. Also there is not just a contrast difference but also a colour difference. It displays how in a very simple test, that you can reproduce yourself, that a lens hood affects a photo. This differing contrast and also differing colour might be what you want in a picture. There was no post-processing. Just shot and hosted. You're quite happy to use them to try and support your argument.

Now it's color problem? First you say "The hood did improve contrast" and now it's a color problem and not a contrast problem? As far as I can tell, both of the colors are in the same range and tonality. On your sample pic, yes, the difference is very negligible. But time and time again I have experienced flare and unwanted lack of contrast due to strays of light hitting my front element.

You can't say that. I just gave you a specific example (sunny day one) of a kind of picture you might want to take where a hood will have a negative effect.

Also maudit asked if a hood would affect the light in his shots and you replied " Not at all" (top of page 2 of this thread).

For specific situations where you "want" flare, I'll give that to you. If that's your intention--go right ahead. I was just stating the fact that a hood does not bring in adverse flaws in your photos in the context that you don't want them.

I replied to maudit in the context of "wanted" light. (again, in the sense that you specifically don't want flare) If I read him right, I assumed he was asking if it affected his exposure, which it does not.

No it isn't, the change in contrast is nothing to do with the angle of the light, just the fact that there was more light. If there had been flare, that would have been because of the light hitting at an "extreme angle" as you put it. Also I didn't risk anything I knew exactly what would happen. I did take the risk that you might be able to understand that the colour and contrast properties of the two pictures would be different and that this difference isn't a negative.

That argument would make sense if your exposure settings were different, but they weren't and the camera metered exactly the same for both pictures. Extraneous light from extreme angles can have more affects than just flare, mind you.

First paragraph from the Cambridge in Color link:

Lens flare is created when non-image forming light enters the lens and subsequently hits the camera's film or digital sensor. This often appears as a characteristic polygonal shape, with sides which depend on the shape of the lens diaphragm. It can lower the overall contrast of a photograph significantly and is often an undesired artifact, however some types of flare may actually enhance the artistic meaning of a photo. Understanding lens flare can help you use it--or avoid it--in a way which best suits how you wish to portray the final image.

See the light from the sun, which is outside the angle of view, that is still part of the picture. I'll say it again. Perhaps with the diagram you'll get it this time.

It is impossible to take a picture with light only entering from the angle of view.

You're misinterpreting the diagram.

The light that is arriving to the lens from outside the angle of view is strictly NOT part of the picture--the lens can't capture light from the part of the image it has no access to. It's a simple matter of focal length and field of view--you're only going to see that light hit the object you're photographing. The picture is the object or scene your camera and lens is pointed at. Whatever that is, that light will get absorbed by your sensor just fine.

The light that is blocked in the diagram is stray light that is hitting directly at your front lens element which causes the problems. The source of the stray light, whether it be the sun or an artificial one, will light the object you're capturing perfectly fine. But the stray light itself has no bearing on the lighting of your object--it hits your lens, not the object which you're capturing.

Hoods are not special flare filters. They also block other things, things you might want. I consider something that will block something I want in a picture a negative effect. Therefore hoods can have a negative effect.

Just because you don't understand what these things are or why you would want them, even though I've tried to explain them and given examples, doesn't mean you can make the statement that hoods have no negative effect.

Just as I'm not making the statement that hoods only have a negative effect.

And yet again you bring up the point that sometimes you might want flare. And again, I've already stated that I understand that and have no problem with it. I have no idea why you're bringing this up again.

I'll try another example. There is a lovely orange sunset. I want to take a picture that captures as much of this wonderful burnt orange colour as possible. I position myself and frame my shot in such a way that there will be no flare. I don't care about having a higher contrast range. I just want to capture as much of this colour as possible. A hood is only going to have a negative effect in this case.

Thanks for the good laugh. :laugh: You don't care about a higher dynamic range--that's silly. A hood isn't going to block any color from you either. Seriously now, you can ask anyone this and they'll say the same. I can bet you that 95% or more of landscape photographers (ultra-wide angle) use a hood that was supplied with their lens.

I've done countless landscape shots all with a hood which had no effect whatsoever with "reducing colors". That's a first for me.

Now it's color problem? First you say "The hood did improve contrast" and now it's a color problem and not a contrast problem? As far as I can tell, both of the colors are in the same range and tonality. On your sample pic, yes, the difference is very negligible. But time and time again I have experienced flare and unwanted lack of contrast due to strays of light hitting my front element.

Did I say it was a colour problem? NO. Did I say it was a contrast problem? NO. The pictures colour and contrast are not the same and the histograms are not the same. Difference != problem. Yes it's negligible but this was a quick and dirty test with a bulb in my study (not a big light source like say the sun). In response to.

What light are you talking about then? Other than flare, what other light is it that you're missing when you put the hood on?

For the most part, it doesn't have an effect. If you'd like to show me some tests yourself, feel free.

That argument would make sense if your exposure settings were different, but they weren't and the camera metered exactly the same for both pictures. Extraneous light from extreme angles can have more affects than just flare, mind you.

First paragraph from the Cambridge in Color link:

Lens flare is created when non-image forming light enters the lens and subsequently hits the camera's film or digital sensor. This often appears as a characteristic polygonal shape, with sides which depend on the shape of the lens diaphragm. It can lower the overall contrast of a photograph significantly and is often an undesired artifact, however some types of flare may actually enhance the artistic meaning of a photo. Understanding lens flare can help you use it--or avoid it--in a way which best suits how you wish to portray the final image.

Way to miss quote. Again did my picture without a hood have any kind of lens flare on it? NO. Was it different from the hooded picture? YES.

You're misinterpreting the diagram.

The light that is arriving to the lens from outside the angle of view is strictly NOT part of the picture--the lens can't capture light from the part of the image it has no access to. It's a simple matter of focal length and field of view--you're only going to see that light hit the object you're photographing. The picture is the object or scene your camera and lens is pointed at. Whatever that is, that light will get absorbed by your sensor just fine.

The light that is blocked in the diagram is stray light that is hitting directly at your front lens element which causes the problems. The source of the stray light, whether it be the sun or an artificial one, will light the object you're capturing perfectly fine. But the stray light itself has no bearing on the lighting of your object--it hits your lens, not the object which you're capturing.

If the light is coming into the lens and arriving at the sensor then it is part of the picture regardless of what it's doing to the object. End of story.

And yet again you bring up the point that sometimes you might want flare. And again, I've already stated that I understand that and have no problem with it. I have no idea why you're bringing this up again.

No I did not a say sometimes you might want flare in the bit you're quoting. The concept you can't seem to grasp is that: Not all light from outside the angle of view is flare and that not all light from outside the angle of view is unwanted.

Thanks for the good laugh. :laugh: You don't care about a higher dynamic range--that's silly. A hood isn't going to block any color from you either. Seriously now, you can ask anyone this and they'll say the same. I can bet you that 95% or more of landscape photographers (ultra-wide angle) use a hood that was supplied with their lens.

I've done countless landscape shots all with a hood which had no effect whatsoever with "reducing colors". That's a first for me.

No you're making me laugh. We've established that a hood stops light coming into a lens and being part of a picture. Yet you still think that a hood doesn't stop light coming into your lens. I've even given you two example photos of this and still you can't wrap your brain around this concept.

I'll say it one last time in the hope that it sinks in.

Not all light from outside the angle of view is unwanted, not all light from outside the angle of view is flare. If you put a lens hood on you are effecting the lighting of your picture (that's what it's designed to do). Whether this is a positive or negative effect depends on the picture you are taking. But you CAN NOT make the statement that hoods don't have a negative effect.

Dude, I meant go OUTSIDE and take pictures. Don't aim your camera at your ceiling that's 3 feet away... lol

Yeah I know and of the manky celling in here. However it's chucking it down outside with 60mph winds. Not great photography weather. However I did do something that proves there is a difference.

giga Better setup than I did but I was supposed to be working so I couldn't spend too long on it.

However I'm afraid you just shot yourself in the foot. Yes it meters the same but look at the two histograms for the pictures. Big differences.

Look I don't want to keep going on about this but there are differences. Please listen to this bit of advice. There is more to the exposure of pictures than iso f-stops and shutter speeds. You have just proved that. If there wasn't the two pictures would be exactly the same, but they're not.

Yes in that situation the hood is good because it gives you a better contrast. Do you have a red bulb? If you do repeat and you will find that the non-hooded image not only has less contrast but also more red. Which is what I was trying to explain with the sunset example. You might want to catch this light so the photo more representative of its surroundings (does that make sense?)

Try thinking about the light generally rather than just the light that's hitting the object you're photographing.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft continues its long-term policy of spying on their users--despite vehement denials. That feature will be disabled (or removed) either "elegantly" with MS providing a true way to disable it, or "quick and dirty" via a third-party who WILL come up with a way to disable it. Your choice MS...
    • Helium Browser 0.13.3.1 by Razvan Serea Helium is a private, fast, and honest Chromium-based web browser — built for people, with love. It offers the best privacy by default, unbiased ad-blocking, and a clean experience free from bloat and noise. Proudly based on Ungoogled-Chromium, Helium removes Google’s clutter while keeping a fast, efficient development pipeline. With thoughtful touches like native !bangs and split view, Helium is a people-first, fully open-source browser that puts control back in your hands. Privacy, security, and control come first. Ads, trackers, and third-party cookies are blocked automatically, HTTPS is enforced everywhere, and all Chromium extensions work seamlessly — while Google can’t track your activity. Helium’s 13,000+ offline-ready !bangs let you jump straight to sites or AI tools like ChatGPT instantly. Open-source, people-first, and unbiased, Helium delivers a browsing experience that’s fast, secure, and free from noise, ads, and compromises. Helium Browser key features: Performance Fast, efficient, and lightweight — built on Chromium’s optimized engine. Energy-saving and consistent — stays fast over time without slowing down. No bloat — stripped of unnecessary components for maximum speed. Minimalist interface — compact, clean, and distraction-free. Customizable toolbar — hide elements you don’t need. Smooth and stable — no flicker, lag, or animation glitches. Comfort-focused experience — intuitive and unobtrusive. Privacy & Security Best privacy by default — blocks ads, trackers, phishing, and third-party cookies. Unbiased ad-blocking — powered by community filters and uBlock Origin. No telemetry or analytics — zero background web requests on first launch. Strict HTTPS enforcement — warns for insecure sites. Passkeys supported — modern authentication made simple. No built-in password manager or cloud sync — your data stays yours. Extension Compatibility Full Chromium extension support — including MV2 extensions. Anonymized Chrome Web Store requests — Google can’t track extension installs. Extended MV2 support — maintained for as long as possible. Smart Features Native !bangs — browse faster using 13,000+ offline-ready shortcuts. AI integration — use !chatgpt and others directly from the address bar. Offline functionality — bangs work without an Internet connection. Philosophy People-first design — open source, transparent, and community-driven. No ads, no noise, no bias — privacy and honesty over profit. Helium Browser 0.13.3.1 changelog: f53b28d update: helium 0.13.3.1 (#292) b3cbb2ba revision: bump to 3 (#1925) bcacb8c7 chromium: update to 149.0.7827.114 (#1924) Download: Helium 64-bit | Portable 64-bit |~100.0 MB (Open Source) Download: Helium ARM64 | Portable ARM64 Links: Helium Home Page | macOS | Linux | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft Weekly: Xbox exclusives are back, big Windows app updates, and more by Taras Buria This week's news recap is here. Microsoft is returning to XBOX exclusives, Windows 11 gets new preview builds, the Low-latency Profile is here, big updates for inbox Windows apps, Patch Tuesday updates, and more. Quick links: Windows 10 and 11 Windows Insider Program Updates are available Reviews are in Gaming news Great deals to check Windows 11 and Windows 10 Here, we talk about everything happening around Microsoft's latest operating system in the Stable channel and preview builds: new features, removed features, controversies, bugs, interesting findings, and more. And, of course, you may find a word or two about older versions. The June 2026 Patch Tuesday updates are now publicly available. Windows 11 users can download KB5094126, which introduces plenty of new features and security updates, including the Low-latency Profile for better performance, shared Bluetooth audio support, and more. Windows 10 users with PCs enrolled in the Extended Security Update program can download KB5094127. In addition, Microsoft released new Defender updates for its operating systems. Speaking of Defender, Microsoft will now deliver EDR updates via Microsoft Update for faster security improvements independent of Patch Tuesday updates. Following the release of this month's Patch Tuesday updates, Microsoft also published new Windows 11 images available in the Media Creation Tool app. Now, you can create bootable USB media for clean Windows 11 installations with the latest releases. Some unfortunate stuff is going on with certain PCs from Dell and HP. Dell acknowledged that the SupportAssist bug causes black screens of death, while HP systems are suffering from Secure Boot update issues and boot loops. Both companies issued official advisories. Windows Insider Program Here is what Microsoft released for Windows Insiders this week: Builds Canary Channel Builds 29610.1000 and 28120.2302 This week's "Canary" builds only contain performance improvements and fixes, including the Low-latency mode, which is now available in the Stable channel for all Windows 11 24H2 and 25H2 users. Dev Channel Build 26300.8687 Microsoft brought some useful File Explorer changes with this build. You can now open folders in a new tab by middle-clicking them in the address bar. Beta Channel Build 26220.8680 and 28020.2298 Screen Tint, improved Windows Widgets, and other enhancements are included in this week's Beta releases. Release Preview Channel Builds 26200.8728 and 26100.8728 These builds also feature better widgets, new Windows Update controls, point-in-time restore, File Explorer improvements, and more. In addition to new Windows 11 preview builds, Microsoft announced that inbox Windows 11 apps now have their dedicated release notes in the official documentation. Also, Microsoft dropped massive feature updates for six apps, including Paint, Clock, Calculator, Camera, Media Player, Photos, and more. Updates are available This section covers software, firmware, and other notable updates (released and coming soon) delivering new features, security fixes, improvements, patches, and more from Microsoft and third parties. Google has some bad news for those still using MV2-based extensions in Chromium-based browsers, particularly Chrome. The company is now removing flags responsible for Manifest V2-based extensions (uBlock Origin is one of the most popular). However, some browsers resist this change, and Opera issued a statement that it will allow users to continue using MV2 extensions for as long as possible. While Microsoft is still not ready to share new details about MV2 extensions in Microsoft Edge, the company shared important details about the way it will be updating the browser going forward. Now, Microsoft wants to update Edge every two weeks across all platforms instead of the current four-week schedule (only the Extended Stable is exempt from this change). This week, Microsoft confirmed a useful new Teams feature that is coming to the messenger soon. It also detailed all the improvements that made the platform better for users in 2026. However, not all changes are great, as the company is moving ahead with the check-in feature, which many believe will lead to employee monitoring. PowerToys received a feature update this week. Version 0.100 arrived with a big rework for the Shortcut Guide, a new extension gallery for Command Palette, new Dock features, and plenty of other changes. Here are other updates and releases you may find interesting: Microsoft is bringing big performance improvements to OneDrive on Mac Popular Windows 11 file manager Files gets improved tags, layouts, and a new OneDrive icon New Outlook for Windows and Web is getting a simple but very useful email feature Microsoft had to shut down 70+ GitHub repos after getting hacked, bringing back some Microsoft AI boss no longer believes that AI will replace human workers Microsoft wants to end printer driver headaches with Windows Ready Print SQL Server Management Studio 22.7 brings "What's New" page, T-SQL formatting, and lots more Microsoft releases Visual Studio Code 1.124 with smarter autonomous AI agents Windows Server gets DNS over HTTPS (DoH) support Here are the latest drivers and firmware updates released this week: NVIDIA 610.52 Hotfix with multiple fixes for black screens of death, sleep issues, G-SYNC, and more. Reviews are in Here is the hardware and software we reviewed this week Steven Parker reviewed a rather unorthodox device here on Neowin this week. He took for a spin the DWARF mini, the world's smallest smart telescope for night and day sky captures. It tracks objects in the sky, has a sun filter, and has a low learning curve. There is also nice build quality and a quite affordable price. Pulasthi Ariyasinghe reviewed 007 First Light. The game turned out to be a satisfying spy adventure in the James Bond universe with great gunplay and combat, impressive crowds, over-the-top action sequences, and more. There are a few quirks here and there, but overall, the game scored high on our scale. On the gaming side Learn about upcoming game releases, Xbox rumors, new hardware, software updates, freebies, deals, discounts, and more. Microsoft held the latest XBOX Games Showcase this week. There, the company announced plenty of cool stuff, including a remake of Halo: Combat Evolved, a special 25th anniversary XBOX Series X with a classic translucent green design (coming in November 2026), details about Gears of War: E-Day, Spyro: A Realm Beyond after nearly 20 years since the last release, a new Hellblade game from Ninja Theory, a new expansion for DOOM: The Dark Ages, fresh details about State of Decay 3, and even a new entry in the Crazy Taxi series. More improtantly for XBOX fans, Microsoft announced the return of XBOX exclusives, with Gears of War: E-Day and Clockwork Revolution kicking it off. Microsoft also has some good news for Nintendo Switch 2 owners. Minecraft is coming natively to the second-gen Switch, offering better performance and new features, including the visual overhaul called "Vibrant Visuals." Playground Games revealed a 30-minute gameplay video of the upcoming Fable, showcasing combat, action, NPC simulation, relationships, and player choices. Additionally, the studio confirmed a bug with Forza Horizon 6 wiping saves for some gamers. It also had to shut down one of the game's online modes after users discovered an infinite money glitch. NVIDIA announced new games for the GeForce NOW streaming service and a big Summer sale that lets you get 12 months of GeForce NOW for $35 or $70 less, depending on the tier. Speaking of discounts, check out this week's Weekend PC Game Deals article, full of discounts and the latest freebies from the Epic Games Store. Great deals to check Every week, we cover many deals on different hardware and software. The following discounts are still available, so check them out. You might find something you want or need. GIGABYTE Radeon RX 9070 XT Gaming OC ICE 16G - $649.99 | 13% off 1TB Samsung T7 Portable SSD - $189.98 | 31% off AirPods Pro 3 - $179 | $50 off Edifier R1280Ts Powered Bookshelf Speakers - $129.99 | 24% off This link will take you to other issues of the Microsoft Weekly series. You can also support Neowin by registering for a free member account or subscribing for extra member benefits, along with an ad-free tier option.
    • Microsoft Flight Simulator's City Update 15 enhances Midwest cities by Pulasthi Ariyasinghe The third major city update of the year has landed for the original Microsoft Flight Simulator and the 2024 release. The latest drop is upgrading the visuals and regional accuracy of three metropolitan regions in the American states of Illinois, Minnesota, and Wisconsin. The 15th city update is adding eight new areas of interest that have been enhanced with high-fidelity TIN (triangulated irregular network) surface texturing in the mentioned regions. The free update highlights Chicago, Elgin, Cicero, and Arlington Heights in Illinois, as well as Minneapolis, St. Paul, Bloomington, Duluth, Brooklyn Park, Woodbury, Lakeville, Plymouth, and Blaine in Minnesota. In Wisconsin, the development has also upgraded the lands and buildings of Milwaukee, Madison, and Racine. The update lands just as one of the world's largest enthusiast flight simulation conventions, FlightSimExpo, kicks off in downtown St. Paul, Minnesota, on June 14. The Flight Sim development team's 40-minute keynote at the event can be watched here. At the same time, Microsoft is bringing the 6-seat, single-engine, multi-use light civil airplane Piper M600 into the game as a part of its Expert Series 2 program. This premium plane can be purchased from the in-game marketplace for $24.99. City Update 15: The United States Midwest is now available in Microsoft Flight Simulator, as well as the newer Microsoft Flight Simulator 2024, as an optional download. It can be accessed across Steam and the Microsoft Store for PC, Xbox Series X|S, and PlayStation 5, as well as Xbox and PC Game Pass subscriptions. Xbox One, mobile, and PC players can also jump into the new content using Xbox Cloud Gaming if they have a Game Pass Ultimate membership. The game must be updated to the latest version to download this free update from the in-game marketplace.
    • Five things you might have missed during Apple's WWDC 2026 by Aditya Tiwari Image: Apple Apple's annual developer event, WWDC 2026, happened from June 8 through June 12. We have already covered several new features and updates that the iPhone maker unveiled during the official keynote. Apple took Google's help and finally announced the upgraded Siri AI personal assistant, which now comes with an app. Moreover, a truckload of Apple Intelligence features took the center stage. That said, this year's WWDC is a bit different, and you might have noticed or missed the following stuff: Apple's ongoing unification of platforms Image: Apple One thing Apple is widely known for is its seamless hardware-software ecosystem. The company added a new chapter in 2020, when it began the Apple Silicon transition and launched macOS 11 Big Sur with native ARM support. Some major changes happened last year as well, when Apple renamed all of its operating systems to version 26 and introduced the Liquid Glass design language. Until WWDC 2025, Apple keynotes had dedicated segments for iOS, iPadOS, macOS, watchOS, and other operating systems, in which the company discussed each in detail. The WWDC 2026 keynote was different, and Apple allotted most of the screen time to Apple Intelligence and Siri. It didn't even publish separate press releases on its website for different operating systems. While it might seem surprising at first, it shows how Apple plans to move forward with its software ecosystem. Be it the Liquid Glass changes, child safety updates, or other features, they are mostly rolling out across multiple platforms. In other words, Apple is slowly blurring the line between its operating systems and achieving feature parity wherever possible. It's easy to rule out that someone in Apple's marketing team forgot to press the publish button. Everything is a calculated move when it comes to a company like Apple. Putting Apple Intelligence left, right, and center hints that the OS itself is no longer the product anymore. It's Siri, not Pepsi Time and again, various Apple products have been compared to unrelated things and turned into meme material. You might have heard about the "cheese grater" Mac Pro or the "trash can" Mac Pro, to name a few. It's Siri's turn this time. The upgraded AI assistant got a fresh logo, and people have started comparing it with Pepsi. There are other contenders, such as the Sony Ericsson logo and the Yin and Yang symbol. Shot on iPhone. Edited on Mac Image: Apple Apple has been putting the iPhone's camera muscles to the test on various occasions. Even NASA astronauts took it to Space earlier this year and captured some out-of-this-world photos. Recently, Apple TV streamed the first major live sporting event shot entirely on iPhone 17 Pro: an MLS match featuring the LA Galaxy vs. the Houston Dynamo FC. The 'Pro' iPhone has also been used to shoot Apple events in recent years. It's "Scary Fast" Mac event in 2023 was among the earliest attempts, and the tradition trickled down to the WWDC 2026 keynote, which ended with the tag line "Shot on iPhone. Edited on Mac." It's unsurprising to see Apple flexing the camera capabilities of its Pro models, especially when it has been baking professional-grade features, including ProRes RAW and Genlock. Hints for the foldable Apple has been sitting on the foldable iPhone for so long. There is still confusion over when the company will make it official. A recent report said that the iPhone Fold might get delayed as Apple is struggling to perfect its hinge mechanism. But Apple has been dropping hints here and there. A developer dug into the iOS 27 beta code and found internal references about device folding states. As verified by Macworld, the code includes references to "foldState" and "angleDegrees" internal status values, which are apparently designed to tell apps if a device is folded and at what angle. As of now, no other Apple device uses these states. The publication also found internal code suggesting Apple has been testing a device with both Touch ID and Dynamic Island, a combo that doesn't exist today. Last event as Apple CEO Image: Apple Tim Cook's bond with Apple is now almost three decades old, having started in 1998 as the SVP of Worldwide Operations. Back in August 2011, Steve Jobs stepped down as Apple CEO months before his passing, and Cook took charge. Now, the baton has been passed to the hardware chief, John Ternus, who will take over the role on September 1. WWDC 2026 is the last major Apple Event for Tim Cook as CEO. We have seen so much during Cook's tenure over the years, much of which defines Apple as we know it today. From new hardware product lines like Apple Watch, AirPods, Apple Vision Pro, and Apple Silicon, to boosting Apple's services business with Apple Music, Apple TV, Apple Pay, Apple Arcade, Apple Fitness+, Apple Care One, and more. That said, the first developer betas for Apple's latest operating systems are now available. You can check if your device is supported on iOS 27, iPadOS 27, macOS 27 Golden Gate, watchOS 27, and other platforms. What's your favorite feature that Apple announced this year at WWDC 2026? Tell us in the comments.
  • Recent Achievements

    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
    • Rookie
      Rimplesnort went up a rank
      Rookie
    • One Year In
      Markus94287 earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      507
    2. 2
      +Edouard
      179
    3. 3
      PsYcHoKiLLa
      140
    4. 4
      ATLien_0
      93
    5. 5
      Steven P.
      78
  • Tell a friend

    Love Neowin? Tell a friend!