Intel Processors Overclock Database


Recommended Posts

EDIT: Sorry I forgot some information before. It won't let me edit my last post.

Intel Core 2 Duo E4500 @ 2.9 GHz

D Stepping

1.38 V-Core (Set to Auto in Bios because it isn't stable for some reason if it isn't)

Stock Intel Box Cooler (Air)

Gigabyte P35-DS3L Rev. 2.0 With F7 Bios

Windows Vista Business x64

Kingston KVR667D2K2/2GR (2GB of RAM) and Kingston KVR667D2N5K2/2G (Other 2GB of RAM)

Both 2GB Kits of RAM are 667MHz (PC2 5300)

The stock latencies are 5-5-5-15, but I have them running at 5-4-4-15 at 792MHz

Stable with prime95 for 12 hours. The temps hover around 60 degrees celsius when running prime 95 after a couple of hours, so I think I'm ok temperature-wise. I don't have screenshots for the prime95 because it was done a while back and didn't think to take screenshots when I did it.

That'll work. :)

I've heard/read that anything 20-30c under tjunction max is safe, of course cooler is always better. I believe that the max temps should be the same for all conroes (95c). I'm sure that Gwai Lo will add you to the list.

Thanks for contributing to the list. (Y)

I see we are the only ones "crazy" enough to run stock coolers. :laugh:

Stock coolers actually seem to be fine for me lol. They're pretty quiet and keep it within safe temps, so why buy some other cooler? lol

I'm currently in the process of testing with a lower v-core to see if it works.

My thinking exactly. That's how I got my temps down to 57-58c after 11+ hours of Orthos. It kept bouncing from one to the other every few seconds. Which to some are high, but still well in the "safe zone".

Well I'll add it, but I just wanted to comment that it may not be the best demonstration of your setup. You're having the board auto overvolt to the overclocking and they *always* overvolt too much, software can't predict stability. Anyway, updated.

I actually updated the bios to the F8F beta bios now, so that can be updated. I was actually kinda scared because the first bios flash didn't flash correctly so my motherboard basically didn't have a bios on it and when I turned my PC on, it said "searching hard disk for bios." I was really scared! I inserted the CD that came with the motherboard into the CD drive just to check if it would work and it reloaded the bios (thank God!). I then flashed it to the latest successfully (F8F) and I also set the v-core to 1.4 volts (instead of auto). This bios doesn't seem to have as horrible v-droop as the F7 because with the F7, I had it set to 1.4125 volts and CPU-Z was reporting 1.344 volts idle and less if under load (it would drop to 1.311 volts and crash, which is why I had it set to auto). Now, with this bios I have the v-core set at 1.4 volts in the bios and CPU-Z is reporting 1.36 volts idle and 1.344 volts under load. I am stress testing with orthos right now to see if its stable, so I'll update you on how it's doing. Also, is CPU-Z very reliable for reporting the v-core? The reason I ask is because in the bios it says that it's really 1.38 volts when I look at the monitoring, but CPU-Z says it's 1.36 volts idle.

How can you guys all run you Vcore at like 1.2 volts? What's the standard Vcore for those processors, because the motherboard detected mine as 1.325 volts and that's the minimum ammount of volts I can run it stably at with stock speeds even.

The newer chips have lower VIDs and most boards will let you undervolt. Overclocking and overvolting is done because your processor is underbinned for its speed...and it works both ways. To run at stock, some times people drop the vcore.

Motherboard and Processor lists have been updated as of 10:11PM June 19, 2008.

CHANGES: Added everyone to motherboard's page, added Obi Wong and Citrusleak to Processor's list. Fixed some formatting issues.

NOTES: If possible please only take a screenshot of the CPU-Z window that you want to post instead of a shot of the entire desktop. Makes it easier for gwai lo and I to update.

Refer to CrashGordon's post if there are any questions as to how your submission should be formatted. :)

Edited by -SHiFT-

The following is how a submission into the database should be made.

It would be ideal if a 8hr+ ORTHOS or Prime95 screenshot was provided. But not mandatory for your submission to be entered into the database.

Processor Core2Duo E6550 @ 2.8GHz

Stepping B

Revision G0

Vcore 1.232v

Method of cooling and make and model of cooler Air, Stock

Make and model of motherboard with BIOS version Asus P5K-e 1013

OS version Vista Ultimate 32bit w/SP1

RAM brand, model number, frequency (actual not effective), and latencies G.Skill, F2-6400CL4-1GBHK, 400MHz, 4-4-3-5 2T @ 2.1v

It is perfectly stable running Orthos for 8 hours, I've had it at these speeds for around 2 months and just didn't save a screenshot of it at the time because I didn't ever think I'd need one. :p It's only a minor OC, and I haven't tried to push it any farther.

cpuci1.jpg

Ok, ran Orthos all night testing 1.192 Vcore. Stable, so at this OC it looks like that's as low as I can go. Temps look good at 37/57c (min/max). If someone can update my Vcore to the new value. Nothing else has changed as far as settings go, just the voltage.

Also on a side note, the easy way to get all three CPUz screens in one shot is to just open CPUz three times and set it on a different tab. :)

oc1192qu5.jpg

Processor Q6600

Stepping B3

Vcore 1.2625

Method of cooling and make and model of cooler air - ZEROtherm Nirvana NV120

Make and model of motherboard with BIOS version ASUS P5K-E Wifi/AP BIOS 1012

OS version Vista Ultimate x64

RAM brand, model number, frequency (actual not effective), and latencies

G.Skill DDR2-800 F2-6400CL5-2GBPQ 334MHz 5-5-5-15

Note: have not tested stability with Orthos, but have played CoD4 for ~8hrs just fine :p

post-250044-1213990140_thumb.jpg

Edited by utdarkviper

Latest version as of June 20th, 2008 12:42PM

Updated with your info. :)

CHANGES: Modified motherboard database such that it is in descending order in terms of FSB. Will probably make it easier to make comparisons between processors.

Edited by -SHiFT-

can we have some clarification on the vcore entry? i assumed you'd want the value it's set to in the bios - while others are posting what cpu-z is showing in windows. and to confuse things even further, some people are posting their cpu-z value while running prime.......these values can vary wildly with vdroop.

for example with my entry i submitted 1.4625v - that's what i have set in the bios. when idling in windows cpu-z shows 1.40v. and you can see from my prime screenshot (on page 1), it's showing 1.36v under load. obviously in a database, saying my cpu can do 3.4ghz with 1.36v looks better than 1.4625. can the OP be updated with the vcore value (bios, windows idle or windows load) that everybody should use.

can we have some clarification on the vcore entry? i assumed you'd want the value it's set to in the bios - while others are posting what cpu-z is showing in windows. and to confuse things even further, some people are posting their cpu-z value while running prime.......these values can vary wildly with vdroop.

for example with my entry i submitted 1.4625v - that's what i have set in the bios. when idling in windows cpu-z shows 1.40v. and you can see from my prime screenshot (on page 1), it's showing 1.36v under load. obviously in a database, saying my cpu can do 3.4ghz with 1.36v looks better than 1.4625. can the OP be updated with the vcore value (bios, windows idle or windows load) that everybody should use.

I also thought about that too. My BIOS setting is 1.2125, but CPU-z reports it as 1.192 although it does not drop while running Orthos.

I think CPU-Z while not running orthos should be the standard, because I notice that even my bios says that my v-core isn't running as high as I have it set in the bios settings. It probably drops further when windows boots just like it drops when maxed out running prime 95 or orthos.

Usually, Vcore is reported as the value in CPU-Z while the computer is at idle, as most motherboards have vdroop which would lower the voltage at load.

Again I will discuss this with gwai lo and adjust as neccessary. :)

can we have some clarification on the vcore entry? i assumed you'd want the value it's set to in the bios - while others are posting what cpu-z is showing in windows. and to confuse things even further, some people are posting their cpu-z value while running prime.......these values can vary wildly with vdroop.

for example with my entry i submitted 1.4625v - that's what i have set in the bios. when idling in windows cpu-z shows 1.40v. and you can see from my prime screenshot (on page 1), it's showing 1.36v under load. obviously in a database, saying my cpu can do 3.4ghz with 1.36v looks better than 1.4625. can the OP be updated with the vcore value (bios, windows idle or windows load) that everybody should use.

Sorry, I guess I should've clarified...I kind of assumed everyone was doing the BIOS vcore because that's what I've been used to on other forums. So here it is and I'll update the first post:

Post the BIOS vcore, the sole reason being vdroop.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I'm fine with a little reasonable promotion of Edge, but the degree which they do it right now I consider extremely unreasonable. 
    • Microsoft AI boss no longer believes that AI will replace human workers by David Uzondu Mustafa Suleyman, the head of Microsoft AI, recently took back his statements concerning white-collar jobs that he gave to the Financial Times in an interview made back in February, where he claimed that AI would replace office workers within 12 to 18 months. On Monday's episode of The Verge's Decoder, Suleyman recast the technology as more like a helpmate than a tool designed to take over your job. He explained that smaller office duties will "increasingly become digitized, automated" as people generate more digital materials. During the discussion, Suleyman emphasized a "very important distinction" between "tasks" and "jobs" to clarify his previous claims. He argued that his earlier comments only referred to individual actions that people perform at their desks. Suleyman used to work for DeepMind, the research lab he co-founded in 2010 alongside Demis Hassabis and Shane Legg, before he left in 2022 to establish Inflection AI and build an empathetic digital assistant. Microsoft hired him in March 2024 to lead its newly formed "Microsoft AI" division, placing him in charge of consumer products like Copilot, Bing, and Edge. His February comments also detailed plans for Microsoft to achieve self-sufficiency with a $140 billion infrastructure budget to train frontier models, predicting that creating a customized AI will soon feel like creating a podcast or a new blog: The 41-year-old is not the only AI executive who's softened his "AI will replace you" stance. OpenAI's CEO, Sam Altman, last month used X to push back against employment panic by arguing that his startup builds tools to assist humans rather than build replacements. He had previously garnered backlash by suggesting that many modern office roles that AI might replace did not qualify as "real work" in the first place, at least when you compare desk jobs to physical, historical labor like farming.
    • Adobe Acrobat Reader DC 2026.001.21662 by Razvan Serea Adobe Acrobat Reader DC software is the free, trusted standard for viewing, printing, signing, and annotating PDFs. Its the only PDF viewer that can open and interact with all types of PDF content – including forms and multimedia. It’s connected to Adobe Document Cloud – so you can work with PDFs on computers and mobile devices. Adobe Document Cloud is a revolutionary, modern and efficient way to get work done with documents in the office, at home or on-the-go. At the heart of Document Cloud is the all-new Adobe Acrobat DC, which will take e-signatures mainstream by delivering free e-signing with every individual subscription. Document Cloud includes a set of integrated services that use a consistent online profile and personal document hub. With Adobe Document Cloud, people will be able to create, review, approve, sign and track documents whether on a desktop or mobile device. Businesses will be able to take advantage of Document Cloud for enterprise which provides enterprise-class document services that integrate into systems of record such as CRM, HCM, CLM, and CMS, adding speed, efficiency and transparency to getting business done with documents. Adobe Acrobat Reader DC new feature highlights: Work with PDFs from anywhere with the new, free Acrobat DC mobile app for Android or iOS. Select functionality is also available on Windows Phone. Use the new Fill & Sign tool in your desktop software to complete PDF forms fast with smart autofill. Download the free Adobe Fill & Sign mobile app to add the same option to your iPad or Android tablet device. Save money on ink and toner when printing from your Windows PC. Store and access files in Adobe Document Cloud with 5GB of free storage. Get instant access to recent files across desktop, web, and mobile devices with Mobile Link. Sync your Fill & Sign autofill collection across desktop, web, and iPad devices. Adobe PDF Pack premium features includes: Convert documents and images to PDF files. Use your mobile device camera to take a picture of a paper document or form and convert it to PDF. Turn PDFs into editable Microsoft Word, Excel, PowerPoint, or RTF files. Combine multiple files into a single PDF (web only). Get signatures from others with a complete e-signature service. Send, track, and confirm delivery of documents electronically instead of using fax or overnight services (tracking not available on mobile). Store and access files online with 20GB of storage. Download: Adobe Acrobat Reader DC 64-bit | 719.0 MB (Freeware) Link: Adobe Acrobat Reader DC Home Page | Release Notes | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Meta will now use data from outside businesses to personalize AI responses by David Uzondu In an update that's rolling out globally (except in a handful of countries), Meta will use your data from outside businesses to personalize your AI responses and your primary feeds. Meta already utilizes your shopping activity to target ads, but the company now plans to expand this tracking to personalize other "parts of your experience" like feed algorithms and AI assistant chats. The company is replacing the two settings ("Your activity off Meta technologies" and "Activity from other businesses") that currently let you disconnect off-platform activity with a single, renamed setting called Activity from other businesses. If you don't want Meta to manipulate your feed and AI responses using your outside history, you can just turn the Activity from other businesses setting off in your account settings. This toggle resides within your Accounts Center, applying your choice to every connected profile. Turning this off will not stop companies from sending your data to Meta. The company will still collect your web interactions, but it only uses them to train products, while still accessing external accounts you connect. When The Verge spoke to Meta spokesperson, Emil Vazquez, the representative said that this update will exclude several locations at launch including the European region, the UK, Brazil, Thailand, South Africa, Turkey, South Korea, Ecuador, Nigeria, and Kenya. The new update comes at a time when the social media giant is recovering from a major PR disaster involving generative AI. Last week, there was a huge security issue on Instagram where attackers figured out a way to exploit a prompt injection vulnerability. Hackers managed to trick Meta AI into handing over account ownership (even if the victim had 2FA enabled). Some of the affected accounts include the dormant Obama White House profile, cosmetics brand Sephora, the Chief Master Sergeant of the Space Force, and security researcher Jane Manchun Wong. Internally, the company also had to scale back plans on its Model Capability Initiative (MCI), an employee-monitoring program designed to train corporate AI models by recording worker keystrokes and screen activity, after employees raised privacy concerns and complained about severe battery life drain.
    • JetBrains is working to cut false positives in RustRover 2026.2 by David Uzondu Recently, JetBrains released the fifth EAP build of its dedicated IDE, RustRover 2026.2, bringing improvements like a Run gutter icon for criterion_main! macro benchmarking and a feature that alerts you when there are unused traits in your current scope. Now, the company is out with a blog post addressing one of the "most common" complaints from users: false positives. In RustRover, a false positive occurs when the editor incorrectly highlights something as an error even though the project compiles and runs successfully. This mismatch flags a gap between the IDE's internal intelligence and the actual compiler. When the editor flashes red warnings over perfectly valid code, developers lose trust in the tool, which stalls momentum. Traditionally, RustRover runs cargo check to detect compiler errors and warnings, but it also relies on its own code analysis engine to power real-time features. To provide quick feedback, this engine parses your source code into a syntax tree while inferring types and resolving names as you type. Because this engine must work on broken, half-written code and react instantly, its logic sometimes diverges from the compiler's, producing false positives that do not exist in the compiler's eyes. JetBrains said that it has a "dedicated task force" focused specifically on identifying and fixing false positives by analyzing user reports and examining large-scale open-source projects. To speed up this process, the team built an internal system modeled after Crater, the famous Rust project that compiles and runs tests for every single crate published on crates.io. This automated pipeline compares the diagnostics from RustRover's analysis with actual compiler output to catch discrepancies before they reach users, ensuring smoother workflows. RustRover, for those who're unaware, is a dedicated IDE designed specifically for Rust developers. It's been around for a couple of years now, providing features like built-in debugging via LLDB, seamless cargo integration, advanced macro expansion, and HTML support. JetBrains distributes the app under two licensing models: a paid commercial subscription and a free option for non-commercial use.
  • Recent Achievements

    • One Year In
      Primer1st earned a badge
      One Year In
    • Experienced
      JayZJay went up a rank
      Experienced
    • Reacting Well
      Sir_Timbit earned a badge
      Reacting Well
    • Week One Done
      rubentuben8 earned a badge
      Week One Done
    • Week One Done
      ARaclen earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      512
    2. 2
      PsYcHoKiLLa
      229
    3. 3
      Edouard
      134
    4. 4
      ATLien_0
      87
    5. 5
      Steven P.
      80
  • Tell a friend

    Love Neowin? Tell a friend!