Recommended Posts

Just installed it. My god it's horrendous. Lagging on the keyboard, constant beachballing, generally everything taking ages to load... urgh.

inplace upgrade or clean install? and what system exactly?

just found this, might clear up what macs get what benefits of SL

http://blog.fosketts.net/2009/08/24/mac-os...ands-august-28/

Edited by Phantom Helix
inplace upgrade or clean install? and what system exactly?

Whatever happens when you whack the disc in and click install. I thought SL did an Archive and Install by default rather than an inplace upgrade.

Anyway I rebooted and waited for Spotlight to finish doing it's thing and it seems to be better now. We'll see how it goes for the rest of the day...

...

1. Is there any downside/negative aspect to going full 64 bit? I'm on the latest Macbook Pro 17" so I'm 'capable'. How do you know if software doesn't work in x64... it just doesn't launch?

...

Software that uses kernel extensions or communicates in certain ways with the kernel won't work (Virtualization software would be one such type)

You don't gain much (if anything) from running the kernel in 64bit mode, it might be slightly faster at some tasks but most of the time spent on the computer isn't spent inside the kernel anyway (Most of the time is spent in frameworks and userland apps, having those 64bit would provide a better opportunity for performance increases than the kernel)

64-bit Kernel and Extensions: No

:(

Same here on my Macbook. My CPU is 64bit, my EFI is, in 64bit kernel boot mode but I'm still stuck with 32bit kernel.

This is a REAL artificial limitation that Apple gave us. Kudos to Windows on that one, as I'm running Win7 x64 in bootcamp without any problems.

Same here on my Macbook. My CPU is 64bit, my EFI is, in 64bit kernel boot mode but I'm still stuck with 32bit kernel.

This is a REAL artificial limitation that Apple gave us. Kudos to Windows on that one, as I'm running Win7 x64 in bootcamp without any problems.

It's not artificial. It's for compatibility reasons. Rather than going all 64-bit or all 32-bit, Apple is giving users the ability to get a very, very large majority of the performance enhancements from 64-bit by letting apps run as 64-bit but still keeping compatibility with virtualization software and other 32-bit kernel extension users by keeping the kernel as 32-bit.

How do I make my Safari 32-bit?

open your applications folder command-click or right click on Safari and select get info, check the open in 32-bit mode check box, close and restart Safari

and here is a better SL feature to Mac hardware compatibility chart

http://blog.fosketts.net/2009/08/24/mac-os...ands-august-28/

open your applications folder command-click or right click on Safari and select get info, check the open in 32-bit mode check box, close and restart Safari

and here is a better SL feature to Mac hardware compatibility chart

http://blog.fosketts.net/2009/08/24/mac-os...ands-august-28/

Thanku!!

Anybody had the issue where the sound/volume level keeps resetting upon every restart?

Originally, my sound would stay on the same level I last used, with Leopard.

But with Snow Leopard, it keeps resetting to Level 4 (25%).

I did an upgrade on my MacBook, and my iMac.

This issue only happens on my MacBook.

click the about this mac to bring up your version window then click the more info button

that brings up the system profiler, click "Software" from the menu on the left, now near the bottom of the right it should say 64bit kernel and extensions YES

Nope, it still says "No". I have the newest 2009 Mini btw.

It's not artificial. It's for compatibility reasons. Rather than going all 64-bit or all 32-bit, Apple is giving users the ability to get a very, very large majority of the performance enhancements from 64-bit by letting apps run as 64-bit but still keeping compatibility with virtualization software and other 32-bit kernel extension users by keeping the kernel as 32-bit.

He mean that Apple locked MacBooks out of using 64bit, for really no reason.

open your applications folder command-click or right click on Safari and select get info, check the open in 32-bit mode check box, close and restart Safari

and here is a better SL feature to Mac hardware compatibility chart

http://blog.fosketts.net/2009/08/24/mac-os...ands-august-28/

According to that chart 64-bit works on my macbook, but it doesnt.

He mean that Apple locked MacBooks out of using 64bit, for really no reason.

According to that chart 64-bit works on my macbook, but it doesnt.

hmm, ok the version didn't change from ADC seed to retail disc as in 10a432, is there however anything they could have done to the retail disc that would lockout some machines that ADC seed does not have?

EDIT:

nevermind i just went back and tried some earlier seeds on my plastic macbook 4,1 it has 64EFI and core 2 duo 64bit and those seeds won't boot 64bit kernel either

Edited by Phantom Helix
Can someone with a store GM / Upgrade do file /mach_kernel and post the results here, I'm wondering if my ADC version has a slight oddity regarding the kernel.

Lucy:~ me$ file /mach_kernel
/mach_kernel: Mach-O universal binary with 3 architectures
/mach_kernel (for architecture x86_64):	Mach-O 64-bit executable x86_64
/mach_kernel (for architecture i386):	Mach-O executable i386
/mach_kernel (for architecture ppc):	Mach-O executable ppc
Lucy:~ me$ md5 /mach_kernel 
MD5 ("/mach_kernel") = 0617c436d6b4960172066982e05401d4

You guys are completely insane.

64-Bit kernel extensions are disabled by default for compatibility -- if you have a 64bit EFI you can run 64 bit with 64 bit kernel extensions you just need to enable them.

Hold 6 and 4 during boot-up ( 3 and 2 for 32 bit )

OR

Edit /Library/Preferences/SystemConfiguration/com.apple.boot.plist and change

<key>Kernel Flags</key>

<string></string>

</dict>

to

<key>Kernel Flags</key>

<string>arch=x86_64</string>

</dict>

Granted I severely doubt any of you need or understand it given the complete inability to google "64 bit snow leopard kernel extensions". Just stay away from it, you don't even need it. Or the ADC build, what a waste.

Granted I severely doubt any of you need or understand it given the complete inability to google "64 bit snow leopard kernel extensions".

You realise that this does not work on a variety of machines that actually do support 64 bit and do have a 64-bit EFI. That's the problem here.

You realise that this does not work on a variety of machines that actually do support 64 bit and do have a 64-bit EFI. That's the problem here.

There was a list of revisions with some issues during the ADC and I'll see if I can track it down I guess. The majority of people here don't fall in to that category though.

You guys are completely insane.

64-Bit kernel extensions are disabled by default for compatibility -- if you have a 64bit EFI you can run 64 bit with 64 bit kernel extensions you just need to enable them.

Hold 6 and 4 during boot-up ( 3 and 2 for 32 bit )

OR

Edit /Library/Preferences/SystemConfiguration/com.apple.boot.plist and change

<key>Kernel Flags</key>

<string></string>

</dict>

to

<key>Kernel Flags</key>

<string>arch=x86_64</string>

</dict>

Granted I severely doubt any of you need or understand it given the complete inability to google "64 bit snow leopard kernel extensions". Just stay away from it, you don't even need it. Or the ADC build, what a waste.

Done that.. it doesn't work on my Unibody MacBook

hmm, ok the version didn't change from ADC seed to retail disc as in 10a432, is there however anything they could have done to the retail disc that would lockout some machines that ADC seed does not have?

EDIT:

nevermind i just went back and tried some earlier seeds on my plastic macbook 4,1 it has 64EFI and core 2 duo 64bit and those seeds won't boot 64bit kernel either

I'm a MacBook5,1 and can't do it v.v

Ive been doing some more reading on the web and i think i may have a valid reason some macs won't in 64-bit regardless of a 64-bit processor and EFI64,

it is possible that the specific EFI firmware version for those computers hasn't recieved a proper update to allow it and may possibly get one in the future and apple decided to not delay the release until said updates were ready, considering it won't really hinder 64-bit apps.

a secondary possibility is that 64-bit system hardware drivers for those machines was also not ready and could be available in the near future, and again apple did not see any benefit in delaying release based on that.

take it with a grain of salt, thats my opinion and i am not going to worry about it any longer, i went through all that with Windows 64-bit and it took 3 64-bit OS versions to get where i wanted to be lol

the fact that SL gives me the option and power to switch on the fly is a huge relief.

Clean installed earlier, works perfectly so far. :D

Though one thing, I can't replace my adress book icon anymore. O.o

what is your installed size? on a plastic macbook the installer said mine was going to take 8.05gb with quicktime 7, no printer/languages/fonts/rosetta but finder says 5.57gb on disk

are the system files compressed that far?

Edited by Phantom Helix
what is your installed size? on a plastic macbook the installer said mine was going to take 8.05gb with quicktime 7, no printer/languages/fonts/rosetta but finder says 5.57gb on disk

are the system files compressed that far?

I've installed a bunch of my stuff and put my 40gb of music on now, bit late now, sorry, lol.

Though from memroy with my options it was aorund 8gb, and I think it took about that too.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • On Tuesday, Microsoft drilled another hole in the duo's sinking relationship with the debut of its MAI-Thinking-1 AI model, a midsize model that the company said is intended for high-efficiency, low-token-cost situations...... https://finance.yahoo.com/markets/article/microsoft-and-openais-relationship-continues-to-crumble-183330195.html  
    • Ladybird Browser is no longer accepting outside contributions thanks to AI by David Uzondu The Ladybird Browser Project has announced it will no longer accept public pull requests and will limit changes to those made by its maintainers as it works towards its first alpha release. According to Ladybird's creator Andreas Kling, this is "not a change we make lightly," but the rapid shift in AI capabilities forced their hand. Previously, a massive PR implied that the person behind it put a lot of care into the code and is ready to "answer for the consequences." Now with AI, anyone can generate a PR without even understanding the bug fix or feature they want merged. The blog post goes on to say that the team is closing all open public pull requests immediately, and that maintainers will not treat external forks as a review queue for upstream Ladybird. Instead, the team wants outside contributors to focus on reporting bugs and running tests. Kling started Ladybird back in 2019 as LibHTML, a simple HTML viewer for his hobby operating system, SerenityOS, but by September 2022, it had turned into a full-fledged browser project. What sets Ladybird apart from the likes of Google Chrome, Apple Safari, or Mozilla Firefox is its totally independent engine, which does not rely on pre-existing codebases. The project maintains a strict policy against default search engine deals or user data monetization, keeping development funded entirely by donations and sponsorships. Generative AI is forcing open source project maintainers to rethink how they handle public code contributions (and the whole open-source thing in general). One month ago, a leak about the National Health Service (NHS) suggested the organization was planning to take all of its public repositories private ahead of a May 11 deadline, thanks to Mythos (an AI model that Anthropic believes is too dangerous to be released to the public) and its ability to find and write exploits for zero-day vulnerabilities. Thankfully, the Government Digital Service (GDS) issued a counter-report titled "AI, open code and vulnerability risk in the public sector" that stopped the shutdown by pointing out that hiding code does not improve security.
    • Kalmuri 4.2.4 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.4 changelog: Fixed an issue where color picking could occasionally freeze Improved capture stability Resolved a possible unexpected app shutdown in certain cases Refined internal handling for a smoother experience Download: Kalmuri 4.2.4 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.4 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I like the show more options. The only problem with it is that it's not always in a consistent spot in the menu. If the copy/paste/cut, happens to show on top, then more option is the last in the menu. But if copy/paste/cut happens to show on the bottom, then more options is before the copy/paste/cut. But I do like the more options because it hides the stuff that I rarely use. But I would like to choose what it is or isn't hiding. That would make it better.
    • I wonder if "put it back the way it was for decades" ever crossed their minds? 🤣
  • Recent Achievements

    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
    • Very Popular
      s0nic69 earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      480
    2. 2
      PsYcHoKiLLa
      254
    3. 3
      Skyfrog
      81
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!