Recommended Posts

HL2.exe error upon exiting - Vista 64

This error has been on going for over a year now. I've given up on STEAM fixing it. Any ideas? Running Vista 64 SP1, every time i exit TF2, I get a HL2.exe error upon closing. In steam, I disabled "Steam In Game Community" and that has not fixed the issue.

So I will see you guys on TF2 when I get around to checking it out...

Even though I had it for the 360, I went ahead and purchased The Orange Box so I could have Portal and TF2. They were each $20, so for just $30 I got them both, plus figured I could always go back and play Episode 2 on a PC, the way it was meant to be played. ;)

Very nice. (Y) Kinda funny that you were able to have a sneak peek of Goldrush earlier last year at Valve's offices, but never got around to owning and playing the game on the PC until now. :p

My Steam name's exactly the same as my forum name, if you're looking for fellow players, or better yet a community to play with ( :shiftyninja: )

TF2 on the 360 isn't that bad, it's just that it lacks updates, which have made it far better than when it was originally released.

The updates alone, plus the giant load of bug fixes over the last year - to think that TF2 on the consoles haven't had them by now is :no:

I had the Orange Box for the X360 and have the Black Box (ATI coupon) for the PC. Unfortunately, my Xbox 360 died on my a long time ago so I rarely played it. The PC version is much better though in pretty much every way.

Anyway, I used to get the hl2.exe error but it recently came back. It started happening again after the latest update. Oh well, it doesn't bother me that much anyway.

Very nice. (Y) Kinda funny that you were able to have a sneak peek of Goldrush earlier last year at Valve's offices, but never got around to owning and playing the game on the PC until now. :p

My Steam name's exactly the same as my forum name, if you're looking for fellow players, or better yet a community to play with ( :shiftyninja: )

The updates alone, plus the giant load of bug fixes over the last year - to think that TF2 on the consoles haven't had them by now is :no:

:rofl: Luckily I had checked it on on the consoles, so I knew about it, I also did play the original version on the PC, so was able to base everything at Valve on those two things. But yeah, I always definitely wanted it on the PC, just did not have a PC to play it on, until now of course. (Y)

So will definitely add you, I am down to play with whomever whenever, just keep in mind I have a lot of catching up to do to you guys, I will probably suck for awhile.

AB, make sure you add me as well. I still have yet to play a real online game with you I do not think!

Anyone fee free to add me honestly, DirtyLarry531

I wish I could play with you as well, but with my connection and location as it is, I wouldn't be able to keep up :( .

Scirwode

:rofl: Luckily I had checked it on on the consoles, so I knew about it, I also did play the original version on the PC, so was able to base everything at Valve on those two things. But yeah, I always definitely wanted it on the PC, just did not have a PC to play it on, until now of course. (Y)

So will definitely add you, I am down to play with whomever whenever, just keep in mind I have a lot of catching up to do to you guys, I will probably suck for awhile.

AB, make sure you add me as well. I still have yet to play a real online game with you I do not think!

Anyone fee free to add me honestly, DirtyLarry531

steam cannot find you :(

add me plz "=DiGr= FusionOpz" and if that dont work "djmyth" lol

or you can usually find me in either the DIG 2fort server or arena server :p

does anyone know how that bug works?

I made my own server and password protected it, i just want to mess around with it.

in console i type explode; jointeam unassigned it brings up the class window, i select the class i want but it doesnt do anything, it just goes somewhere on the map and doesnt respawn or anything.

hows this work?

does anyone know how that bug works?

I made my own server and password protected it, i just want to mess around with it.

in console i type explode; jointeam unassigned it brings up the class window, i select the class i want but it doesnt do anything, it just goes somewhere on the map and doesnt respawn or anything.

hows this work?

The exploit apparantly only works on Instarespawn servers, you have to set "mp_disable_respawn_times" to 1 for it to work.

On the flip side, spawn times that vary from 11 to 30 seconds is just absurd (highest I've hit is 33 seconds) :angry:

Well, if people just insta spawned, you would get an ongoing endless onslaught of players with aboslutely no breaks. That would end virtually every CTF game in a stalemate.

On the flip side, spawn times that vary from 11 to 30 seconds is just absurd (highest I've hit is 33 seconds) :angry:

Yea, those 25-30 second spawn times you see on some servers are just painful. It's kind of like.. "wake me when i finally respawn".

Instaspawn is only good on dm_store (no criticals, skilled players) servers, other than that instaspawn just ruins the game since mose maps will just be a steamroll on attack/defend maps and stalemates on ctf. 5 cap point ones vary a little but still, it just makes the game too relentless.

instaspawn servers suck, so exploiting on those are fair game.

Personally what I think anyway :p

Couldn't agree more, I really can't understand how people like playing on 32-slot Instarespawn dustbowl spamfest servers.

I suppose that's not really surprising as I have my own 14-slot server.

Edited by Athernar
I had the Orange Box for the X360 and have the Black Box (ATI coupon) for the PC. Unfortunately, my Xbox 360 died on my a long time ago so I rarely played it. The PC version is much better though in pretty much every way.

Anyway, I used to get the hl2.exe error but it recently came back. It started happening again after the latest update. Oh well, it doesn't bother me that much anyway.

I have the same error on server 08 x64, pretty much same thing as vistax64.

Not sure if it has been mentioned yet, but I also got the HalfLife2.exe error as well, also Vista 64.

As it happened though, AVG popped up and gave me a message about an issue with DEP.

Well in my research of getting Quake Live running, it appears that this DEP messes up a whole lot of things gaming wise (Data Execution Prevention).

I have a way to turn it on and off using the console thanks to some googling, so if anyone is interested let me know and I can post when I get home from work in about 8 hours from now. Thing is though it is pretty important in stopping malicious activity, so really up to you and if you feel comfortable disabling it. But all it takes is a console commmand and a restart, and then the same thing to enable it again if you want to.

Couldn't agree more, I really can't understand how people like playing on 32-slot Instarespawn dustbowl spamfest servers.

I suppose that's not really surprising as I have my own 14-slot server.

I joined one of those, dear god, the amount of spam.

Well, if people just insta spawned, you would get an ongoing endless onslaught of players with aboslutely no breaks. That would end virtually every CTF game in a stalemate.

Pretty much. But stalemates are fun in my opinion :D The amount of buildings that go up and down within the space of 30 minutes is crazy.

These servers are perfect for snipers to use for target practice. Could be a good or bad thing depending on which side those snipers are on.

Not sure if it has been mentioned yet, but I also got the HalfLife2.exe error as well, also Vista 64.

As it happened though, AVG popped up and gave me a message about an issue with DEP.

Well in my research of getting Quake Live running, it appears that this DEP messes up a whole lot of things gaming wise (Data Execution Prevention).

I have a way to turn it on and off using the console thanks to some googling, so if anyone is interested let me know and I can post when I get home from work in about 8 hours from now. Thing is though it is pretty important in stopping malicious activity, so really up to you and if you feel comfortable disabling it. But all it takes is a console commmand and a restart, and then the same thing to enable it again if you want to.

Or you can goto advanced system properties and click the turn off dep radio button :p

This topic is now closed to further replies.
  • Posts

    • Media Player Classic - Home Cinema 2.7.3 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.7.3 changelog: Updated LAV Filters to version 0.82 Updated MPC Video Renderer to version 0.10.4.2550 Updated MPC Audio Renderer A few crash fixes, bug fixes and small improvements. Download: MPC-HC 2.7.3 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.7.3 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft will finally let you sign in to Edge with a Google account by Usama Jawad As things currently stand, Microsoft Edge only allows you to sign in to the browser with a Microsoft Account (MSA). This allows you to sync your browser settings and other data across other devices, as long as you sign in with the same account. However, Microsoft is now modifying this mechanism in a way that will likely please many users. In an update to its Microsoft 365 Roadmap, Microsoft has indicated that it will soon let users sign into Edge using a Google account from the profile menu and the Edge sign-in screen. This will be in addition to the MSA login option, and it opens up new doors for people who prefer using Edge, but cannot be bothered to configure a Microsoft account. This brings several advantages such as the ability to sync your data across devices using just a Google account. It may even facilitate flexible single sign-on (SSO) experiences where you can quickly login to websites and services through a single Google account that is presented as the preferred sign-in option. Up until now, Microsoft allowed customers to indirectly use a Google account, by configuring a Google account as a Microsoft account, or by setting up a one-way sync option between Edge and Chrome. This is a rather interesting development, especially considering that Google Chrome still limits you to a Google account sign-in, but it will be interesting to see if the company reciprocates Microsoft's gesture in the future. This is not the only recent instance in which Microsoft has extended a handshake to Google via Edge. In April 2026, it began tracking the development of a work search banner for Google Search queries, just like the one present in Edge. However, if we go back almost seven years, to January 2020, Microsoft had emphasized that it had no plans to "integrate Google services into Microsoft Edge by default", in response to people requesting Google sign-in services on Edge. Fast-forward to today, and Microsoft is planning to release this feature in July 2026, with IT admins having the option to control its availability on Windows and macOS through the NonMicrosoftAccountSignInEnabled policy.
    • If they ever come out and say the AI is no longer accessible to the gen pop people aren't going to know how to tie their own shoelaces.
    • It's hard not to when they are shoehorning Ai into EVERYTHING. Some are active users by choice, I bet a lot of them are because it's shoved in their face the entire time.
    • Thunderbird 152.0 by Razvan Serea Thunderbird is a free, open-source, cross-platform application for managing email and news feeds. It is a local (rather than a web-based) email application that is powerful yet easy-to-use. Thunderbird is clean and elegant by default, but easily customizable to match your workflow and visual preferences. It is loaded with unique and powerful features. Thunderbird is developed, tested, translated and supported by the folks at Mozilla Corporation and by a group of dedicated volunteers. Thunderbird gives you control and ownership over your email. There are lots of add-ons available for Thunderbird that enable you to extend and customize your email experience. Thunderbird gives you IMAP/POP support, a built-in RSS reader, support for HTML mail, powerful quick search, saved search folders, advanced message filtering, message grouping, labels, return receipts, smart address book LDAP address completion, import tools, and the ability to manage multiple e-mail and newsgroup accounts. Thunderbird 152.0 changelog: SecurityDevices enabled in enterprise policies One-click account setup for Thundermail accounts What’s Changed Use 'Add' instead of 'New' for account, calendar, address book creation buttons GMail OAuth updated to use PKCE Mail server hostname also checked when detecting address books and calendars Updated about:rights to replace local with hosted url 'Hide completed tasks' now also hides cancelled tasks What’s Fixed New mail alerts appeared on wrong monitor in three-monitor setup Spam messages triggered new mail notifications before being moved to Spam folder Filtered IMAP or NNTP subscriptions were lost after closing Subscribe dialog 'Download Headers' dialog for newsgroups failed to open Messages nested deeper than 255 levels disappeared from threading view Performing Delete followed by Undo on thread parent message could corrupt view Single messages still appeared collapsible after thread members were deleted Updated threads remained misordered until folder refresh or resort Non-threaded subject sorting separated 'RE:' replies from original messages BCC recipients were included in signed email headers Filter search on Body missed draft messages containing German umlauts Thunderbird could crash during local message search Blocked file warning showed without 'Unblock File' button in compose window Forwarding/Redirecting Exchange messages failed with NS_ERROR_OUT_OF_MEMORY Compose window closed early and send progress dialog hung after NNTP failure Compose window stayed open after sending when mailnews.sendInBackground set Microsoft OAuth2 failed when HTTPS localhost redirect was not intercepted Pasting contact photos stopped working when photo button had focus Filter dialog lacked focus ring and had poorly distinguishable buttons Subfolder kept stale accessibility unread count after unread messages were deleted 'Edit as New Message' and inline 'Forward' not possible with PGP-signed messages Various MIME improvements EWS messages could go missing from folder view IMAP "Show only subscribed folders" could not be changed without restart Unable to delete more than 1000 messages at a time on Microsoft 365 EWS folders in Trash were moved to Trash again instead of being hard deleted IMAP notifications repeated for emails read on another device after sleep wake POP3 deadlocked when server went silent without closing socket Calendar acceptance no longer distinguished between single occurrence and series Transparent popups on macOS made calendar event editing difficult Duplicate attendees were added to invitations instead of being filtered out Task percentage complete was not preserved separately from status in tooltips Visual and UX improvements Security fixes Download: Thunderbird 152.0 for Windows (EN/US) | 32-bit | ~70.0 MB (Open Source) Download: Thunderbird 152.0 for Mac OS (EN/US) | 145.0 MB Download: Thunderbird 152.0 in other languages View: Thunderbird Website | Screenshot | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      89
    4. 4
      Steven P.
      76
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!