Recommended Posts

I prefer to do the same thing with the shotgun, but killing them instantly instead of relying on afterburn to finish the job. Yes the flare gun can kill them when it hits, but I find the shotgun more likely to do so....besides, if they don't die in 1 flare gun shot they will be out of range (or out of sight) before you can reload and fire again (usually) so you are forced to rely on the afterburn....with the SG you get instant damage multiple times so its more likely to kill them. That being said I change between them often.....if I'm on large open maps I grab the flare gun, small enclosed maps I use the SG....flares are great for burning a heavy at long range where you can jump out and shoot a flare only to be hit by a few of his bullets for very low damage.

True. I sometimes interchange between the Flare Gun and shotgun as well. On large maps, the Flare Gun is preferable because you could harass the enemy from a long range. It also works wonders against Snipers. The shotgun comes in handy in close to medium quarters. I find myself using it more often on maps like 2Fort and Badlands.

I've gotten lots of kills with the flaregun, more so than I have with my shotgun, I use the normal flamethrower because the compression blast is very useful, and I've only managed to hit somebody with the axe once, so I don't care what one I use.

With the medic I use the Blutsauger, the normal Medigun and the ?bersaw. With the heavy I've only got Natascha and the Sandvich, I switch between Sasha and Natascha depending on the situation, but I've always got the Sandvich equipped.

I'm more of a defence pyro, or one that runs at his enemies (with backup of course), so the backburner isn't very useful. Being able to stop an uber rush dead in it's tracks is however (juggling demo's is fun).

My extremely minor nitpick: when are they going to give all the weapons actual pictures for weapon selection icons? Only the original ones have them, not the unlockables. The unlockables are pixelated and have text, but the originals have no text.

Just annoys me. :laugh:

Hmm I'm really annoyed now - I've lost most of my achievements and stats from TF2 (it's reset to me playing a total of 8 hours :().

I don't remember ever having this problem on any game on Steam before :s.

I wrote about it a couple of pages back, it really annoyed me and put me off from playing TF2 for now :hmmm: .

Scirwode

My extremely minor nitpick: when are they going to give all the weapons actual pictures for weapon selection icons? Only the original ones have them, not the unlockables. The unlockables are pixelated and have text, but the originals have no text.

Just annoys me. :laugh:

There was a email on SPUF awhile back that said they're going to be redoing the weapon selection, the unlocks are the models rendered directly to the VGUI, which is why they look like crap.

Precisely what "redoing" means in this case I have no idea, but I suspect it means static images.

I'd actually like to see L4D style weapon switching too, ontop of killicons for the unlocks too, rather than just copying the originals.

Cool! It has the accuracy of a Sniper rifle but it heats up so you'll have to make every shot count. Good thing is, it has the same ammo count as a revolver. I wonder if it'll slow down the Spy whenever he wields it. It's an understandable price to pay for the increased accuracy.

This topic is now closed to further replies.
  • Posts

    • Windows 11 KB5094126 BSODing, freezing, forcing BitLocker lockout, breaks OneDrive, and more by Sayan Sen Microsoft released Windows 11 KB5094126 and KB5093998 last week as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. While Microsoft has so far not acknowledged any major problems with the release, some users online are running into problems. These range from OneDrive and Dropbox access issues, BitLocker recovery lockouts, to blue screens and BSODs. The most common one seems to be happening with HP systems wherein affected users say they hit 0xc0430001 BSOD (blue screen of death) error code after the KB5094126 update. We wonder if this could be related to the recent bug we covered on HP devices wherein the ongoing Secure Boot certificate updates are leading to similar issues. While we are not certain, users affected by this issue likely need to ensure that the boot.stl file is included on the installation media (such as a USB installer or ISO), if the above-mentioned dynamic updates are deployed. If this file is missing, computers may fail to boot from the installation media and could display the error 0xc0430001. This STL file is used by Secure Boot to verify that the boot files are trusted, so it must match the same Windows version and system architecture. To ensure the file is included, Microsoft recommends using the Update WinPE script, which automatically updates the image and handles the required files. Alternatively, you can manually copy the boot.stl file from the Windows\Boot\EFI folder on a Windows device and place it in the matching folder on your installation media before deploying the updated image. Aside from blue screening some users also note their systems have been freezing following the update. This could be happening to Lenovo PCs specifically. In the case of the OneDrive and Dropbox access issues, a user figured out that there could be a conflict with UAC. He explained: "Okay, so I did some digging, and in our environment KB5094126 breaks OneDrive and Dropbox in Explorer. I went through all our GPOs and found out that the combination of disabling UAC and having my user being a local admin breaks OneDrive in Explorer. ... If I enable UAC again, then it works, even with KB5094126 still installed." Hopefully, Microsoft will look into these issues. Source: Microsoft forum (link1, link2, link3, link4), Reddit (link1, link2, link3, link4)
    • It is when it's a desktop in my house though for a PC that's lightly used and not really important when it is. If it was a laptop, it would be a different story. The real solution is varied and begins starting at post #22 in that thread.
    • Win11Debloat 2026.06.14 by Razvan Serea Win11Debloat is a lightweight, easy to use PowerShell script that allows you to quickly declutter and customize your Windows experience. It can remove pre-installed bloatware apps, disable telemetry, remove intrusive interface elements and much more. The script also includes many features that system administrators and power users will enjoy. Such as a powerful command-line interface, support for Windows Audit mode and the option to make changes to other Windows users. All changes made by Win11Debloat can be easily reversed, and most removed apps can be restored via the Microsoft Store. A full guide on how to undo the changes is available here. Win11Debloat features: Below is an overview of the key features and functionality offered by Win11Debloat. Please refer to the wiki for more information about the default settings preset. Remove a wide variety of preinstalled apps. Click here for more info. Disable telemetry, diagnostic data, activity history, app-launch tracking & targeted ads. Disable tips, tricks, suggestions & ads across Windows. Disable Windows location services & app location access. Disable Find My Device location tracking. Disable 'Windows Spotlight' and tips & tricks on the lock screen. Disable 'Windows Spotlight' desktop background option. Disable ads, suggestions and the MSN news feed in Microsoft Edge. Hide Microsoft 365 ads on the Settings 'Home' page, or hide the 'Home' page entirely. Disable & remove Microsoft Copilot. Disable Windows Recall. Disable Click to Do, AI text & image analysis tool. Prevent AI service (WSAIFabricSvc) from starting automatically. Disable AI Features in Edge. Disable AI Features in Paint. Disable AI Features in Notepad. Disable the Drag Tray for sharing & moving files. Restore the old Windows 10 style context menu. Turn off Enhance Pointer Precision, also known as mouse acceleration. Disable the Sticky Keys keyboard shortcut. Disable Storage Sense automatic disk cleanup. Disable fast start-up to ensure a full shutdown. ...and more. Once you’ve downloaded the Win11Debloat file (Get.ps1), just follow these quick steps: Locate the Get.ps1 script file. Right-click the file and select Run with PowerShell from the context menu. If prompted by User Account Control (UAC), select Yes to grant the script the necessary administrative permissions. Win11Debloat 2026.06.14 changes: This is a minor release that hopefully addresses the false positives in Windows Defender and Bitdefender that prevented users from downloading and/or running Win11Debloat. Refactor Get-RegFileOperations.ps1 to address false positives by @Raphire in #626 Add logging around WinGet app retrieval and increase timeout to 20s by @Raphire Download: Win11Debloat 2026.06.14 | Open Source View: Win11Debloat Home Page | Screenshots 1| 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Still using Microsoft Money 2005 in 2026 here!
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!