Recommended Posts

Surprised nobody has posted this yet, here is the latest update:

Engine

  • Improved crash reporting system to enable more detailed crash reports
  • Fixed a client crash caused by a buffer overflow while processing temp entities

Team Fortress 2

  • Fixed a case where the Spy could start taunting and cloak at the same time
  • Flamethrower changes:
  • Increased base damage 10%
  • Afterburn duration increased (from 6 to 10)
  • Flares that hit a burning player at mid-to-long range will crit
  • Reduced Backburner damage bonus from 20% to 15%

I excluded the CS:S Beta changes as they are not relevant to TF2....

With the above pyro changes though, the flamethrower base damage has been increased by 10%, the Backburner bonus damage is 15% higher AFTER the 10% increase (flamethrower = 10% more than previous, backburner = 15% more than CURRENT flamethrower, after the 10% base damage increase).

So, while the Backburner bonus damage was technically nerfed, it does more damage than it did yesterday (for example) by a small amount.

In short, pyro got a slight damage buff, and the afterburn got buffed as well, plus, flares got a buff.

Not bad, they restored the afterburn at least (THANK YOU!). Still good to see the backburner maintain a small damage increase over the standard flamethrower.

Good change to the flares - that means that Pyros can effectively take down snipers in two flares, assuming the sniper doesn't have a full jar of pee.

Was hoping the Hoemwrecker would get tweaked to increase the number of hits for a sapper to two. Because this means if an Engie has a pocket Pyro spies can't do anything, ubers can't do anything because of compression.

so yeah, homewrecker is a gamebreaker.

Not bad, they restored the afterburn at least (THANK YOU!). Still good to see the backburner maintain a small damage increase over the standard flamethrower.

Good change to the flares - that means that Pyros can effectively take down snipers in two flares, assuming the sniper doesn't have a full jar of pee.

Three if he does have Jarate and stays still long enough.

Was hoping the Hoemwrecker would get tweaked to increase the number of hits for a sapper to two. Because this means if an Engie has a pocket Pyro spies can't do anything, ubers can't do anything because of compression.

so yeah, homewrecker is a gamebreaker.

I disagree, before the homewrecker, if an engy died, a spy could clear his entire nest. Now, spies have to be a bit more careful, if a pyro is around they cannot simply sap and run/die to clear the nest, they have to make a choice to sap and die and not kill anything, or not sap it and wait for the pyro to leave.

Even with the pyro there, if the spy coordinates with his team, he can sap the sentry at the least, the pyro will either go after the spy (or at least push him away) and attempt to unsap the gun, if you have a single demo push un with that sap, he can clear the sentry without problem.

So in short, you are complaining that a spy requires teamwork to take out a sentry nest now, heaven forbid the spy works with his team!

There is more than one new item coming. I looked up real fast and found 171, 172 and item 174. I suppose there is a 173 also somewhere and maybe a 175.

Yeah, kinda figured 172 was just the tip of the iceberg........they could be engy items but I highly doubt Valve would put them into the Steam Cloud this far before the engy update (going by their typical reveal method, there is still at least a week or so until we would actually get the engy items, even if they revealed it today), so chances are its a few more community items and a few more hats (some of the items seem to have a variable level, which Hats are known for doing, while others have a static level).

EDIT: Oh, and 173 is a spy item (forgot which), so it would not be a new one.

EDIT2: There we go, item 173 was a camera beard. This same thing happened to people right before the Camera Beard was released, when it did release, Unknown Item 173 turned into a Camera Beard.

"TF_ScoutWhoopee" "Whoopee Cap"

"TF_PyroMonocle" "Whiskered Gentleman"

"TF_MedicGoggles" "Ze Goggles"

"TF_MedicGoggles_Desc" "Nothing"

"TF_EngineerEarmuffs" "Safe'n'Sound"

"TF_DemomanTricorne" "Tippler's Tricorne"

"TF_SpyBeret" "Frenchman's Beret"

"TF_SniperFishingHat" "Bloke's Bucket Hat"

"TF_PyroHelm" "Vintage Merryweather"

"TF_SoldierDrillHat" "Sergeant's Drill Hat"

"TF_MedicGatsby" "Gentleman's Gatsby"

"TF_HeavyDorag" "Heavy Duty Rag"

haaats.jpg

Weapons:

Tribleman's Shiv (Sniper machete)

On hit: Bleed for 8 seconds

-35% damage done

c_wood_machete_sized.png

The Scotsman's Skullcutter (Demo melee)

+20% damage done

-15% move speed on wearer

c_battleaxe_sized.png

Weapons:

Tribleman's Shiv (Sniper machete)

On hit: Bleed for 8 seconds

-35% damage done

c_wood_machete_sized.png

The Scotsman's Skullcutter (Demo melee)

+20% damage done

-15% move speed on wearer

c_battleaxe_sized.png

I wonder if the new bleed effect shows through a cloaked spy, like Jarate does? If so, another sniper counter for spy! Apparently, the bleed effect does 64 damage, then whatever the normal melee hit is....

And I hope every demo starts using the new unlock, slowing a class with two primary weapons down would be nice.

EDIT: Better pic: http://www.pelipurkki.net/images/tf2_hattuu.jpg

Shows all the items (both weapons and hats) along with what class wears them, and in better quality.

Just an interesting note for the Shiv, if you hit a spy with it, non-DR spies constantly flash like they are being bumped into (along with blood dripping off them), and DR spies, while they do not flash, they still show blood dripping off of them. This may be a bug that is going to be fixed (as the DR currently removes fire, why wouldn't it do the same for the bleed effect?), but currently it is a great counter to spies. Plus, if you get a good solid hit or two on people, even without a crit, the bleeding is often enough to finish them off if they have no medic around or anything....making your more effective to counter the solo people that usually approach you from behind, as you can leave them bleeding to hopefully die if they do kill you.

This topic is now closed to further replies.
  • Posts

    • Media Player Classic - Home Cinema 2.7.3 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.7.3 changelog: Updated LAV Filters to version 0.82 Updated MPC Video Renderer to version 0.10.4.2550 Updated MPC Audio Renderer A few crash fixes, bug fixes and small improvements. Download: MPC-HC 2.7.3 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.7.3 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft will finally let you sign in to Edge with a Google account by Usama Jawad As things currently stand, Microsoft Edge only allows you to sign in to the browser with a Microsoft Account (MSA). This allows you to sync your browser settings and other data across other devices, as long as you sign in with the same account. However, Microsoft is now modifying this mechanism in a way that will likely please many users. In an update to its Microsoft 365 Roadmap, Microsoft has indicated that it will soon let users sign into Edge using a Google account from the profile menu and the Edge sign-in screen. This will be in addition to the MSA login option, and it opens up new doors for people who prefer using Edge, but cannot be bothered to configure a Microsoft account. This brings several advantages such as the ability to sync your data across devices using just a Google account. It may even facilitate flexible single sign-on (SSO) experiences where you can quickly login to websites and services through a single Google account that is presented as the preferred sign-in option. Up until now, Microsoft allowed customers to indirectly use a Google account, by configuring a Google account as a Microsoft account, or by setting up a one-way sync option between Edge and Chrome. This is a rather interesting development, especially considering that Google Chrome still limits you to a Google account sign-in, but it will be interesting to see if the company reciprocates Microsoft's gesture in the future. This is not the only recent instance in which Microsoft has extended a handshake to Google via Edge. In April 2026, it began tracking the development of a work search banner for Google Search queries, just like the one present in Edge. However, if we go back almost seven years, to January 2020, Microsoft had emphasized that it had no plans to "integrate Google services into Microsoft Edge by default", in response to people requesting Google sign-in services on Edge. Fast-forward to today, and Microsoft is planning to release this feature in July 2026, with IT admins having the option to control its availability on Windows and macOS through the NonMicrosoftAccountSignInEnabled policy.
    • If they ever come out and say the AI is no longer accessible to the gen pop people aren't going to know how to tie their own shoelaces.
    • It's hard not to when they are shoehorning Ai into EVERYTHING. Some are active users by choice, I bet a lot of them are because it's shoved in their face the entire time.
    • Thunderbird 152.0 by Razvan Serea Thunderbird is a free, open-source, cross-platform application for managing email and news feeds. It is a local (rather than a web-based) email application that is powerful yet easy-to-use. Thunderbird is clean and elegant by default, but easily customizable to match your workflow and visual preferences. It is loaded with unique and powerful features. Thunderbird is developed, tested, translated and supported by the folks at Mozilla Corporation and by a group of dedicated volunteers. Thunderbird gives you control and ownership over your email. There are lots of add-ons available for Thunderbird that enable you to extend and customize your email experience. Thunderbird gives you IMAP/POP support, a built-in RSS reader, support for HTML mail, powerful quick search, saved search folders, advanced message filtering, message grouping, labels, return receipts, smart address book LDAP address completion, import tools, and the ability to manage multiple e-mail and newsgroup accounts. Thunderbird 152.0 changelog: SecurityDevices enabled in enterprise policies One-click account setup for Thundermail accounts What’s Changed Use 'Add' instead of 'New' for account, calendar, address book creation buttons GMail OAuth updated to use PKCE Mail server hostname also checked when detecting address books and calendars Updated about:rights to replace local with hosted url 'Hide completed tasks' now also hides cancelled tasks What’s Fixed New mail alerts appeared on wrong monitor in three-monitor setup Spam messages triggered new mail notifications before being moved to Spam folder Filtered IMAP or NNTP subscriptions were lost after closing Subscribe dialog 'Download Headers' dialog for newsgroups failed to open Messages nested deeper than 255 levels disappeared from threading view Performing Delete followed by Undo on thread parent message could corrupt view Single messages still appeared collapsible after thread members were deleted Updated threads remained misordered until folder refresh or resort Non-threaded subject sorting separated 'RE:' replies from original messages BCC recipients were included in signed email headers Filter search on Body missed draft messages containing German umlauts Thunderbird could crash during local message search Blocked file warning showed without 'Unblock File' button in compose window Forwarding/Redirecting Exchange messages failed with NS_ERROR_OUT_OF_MEMORY Compose window closed early and send progress dialog hung after NNTP failure Compose window stayed open after sending when mailnews.sendInBackground set Microsoft OAuth2 failed when HTTPS localhost redirect was not intercepted Pasting contact photos stopped working when photo button had focus Filter dialog lacked focus ring and had poorly distinguishable buttons Subfolder kept stale accessibility unread count after unread messages were deleted 'Edit as New Message' and inline 'Forward' not possible with PGP-signed messages Various MIME improvements EWS messages could go missing from folder view IMAP "Show only subscribed folders" could not be changed without restart Unable to delete more than 1000 messages at a time on Microsoft 365 EWS folders in Trash were moved to Trash again instead of being hard deleted IMAP notifications repeated for emails read on another device after sleep wake POP3 deadlocked when server went silent without closing socket Calendar acceptance no longer distinguished between single occurrence and series Transparent popups on macOS made calendar event editing difficult Duplicate attendees were added to invitations instead of being filtered out Task percentage complete was not preserved separately from status in tooltips Visual and UX improvements Security fixes Download: Thunderbird 152.0 for Windows (EN/US) | 32-bit | ~70.0 MB (Open Source) Download: Thunderbird 152.0 for Mac OS (EN/US) | 145.0 MB Download: Thunderbird 152.0 in other languages View: Thunderbird Website | Screenshot | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      89
    4. 4
      Steven P.
      76
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!