Recommended Posts

Surprised nobody has posted this yet, here is the latest update:

Engine

  • Improved crash reporting system to enable more detailed crash reports
  • Fixed a client crash caused by a buffer overflow while processing temp entities

Team Fortress 2

  • Fixed a case where the Spy could start taunting and cloak at the same time
  • Flamethrower changes:
  • Increased base damage 10%
  • Afterburn duration increased (from 6 to 10)
  • Flares that hit a burning player at mid-to-long range will crit
  • Reduced Backburner damage bonus from 20% to 15%

I excluded the CS:S Beta changes as they are not relevant to TF2....

With the above pyro changes though, the flamethrower base damage has been increased by 10%, the Backburner bonus damage is 15% higher AFTER the 10% increase (flamethrower = 10% more than previous, backburner = 15% more than CURRENT flamethrower, after the 10% base damage increase).

So, while the Backburner bonus damage was technically nerfed, it does more damage than it did yesterday (for example) by a small amount.

In short, pyro got a slight damage buff, and the afterburn got buffed as well, plus, flares got a buff.

Not bad, they restored the afterburn at least (THANK YOU!). Still good to see the backburner maintain a small damage increase over the standard flamethrower.

Good change to the flares - that means that Pyros can effectively take down snipers in two flares, assuming the sniper doesn't have a full jar of pee.

Was hoping the Hoemwrecker would get tweaked to increase the number of hits for a sapper to two. Because this means if an Engie has a pocket Pyro spies can't do anything, ubers can't do anything because of compression.

so yeah, homewrecker is a gamebreaker.

Not bad, they restored the afterburn at least (THANK YOU!). Still good to see the backburner maintain a small damage increase over the standard flamethrower.

Good change to the flares - that means that Pyros can effectively take down snipers in two flares, assuming the sniper doesn't have a full jar of pee.

Three if he does have Jarate and stays still long enough.

Was hoping the Hoemwrecker would get tweaked to increase the number of hits for a sapper to two. Because this means if an Engie has a pocket Pyro spies can't do anything, ubers can't do anything because of compression.

so yeah, homewrecker is a gamebreaker.

I disagree, before the homewrecker, if an engy died, a spy could clear his entire nest. Now, spies have to be a bit more careful, if a pyro is around they cannot simply sap and run/die to clear the nest, they have to make a choice to sap and die and not kill anything, or not sap it and wait for the pyro to leave.

Even with the pyro there, if the spy coordinates with his team, he can sap the sentry at the least, the pyro will either go after the spy (or at least push him away) and attempt to unsap the gun, if you have a single demo push un with that sap, he can clear the sentry without problem.

So in short, you are complaining that a spy requires teamwork to take out a sentry nest now, heaven forbid the spy works with his team!

There is more than one new item coming. I looked up real fast and found 171, 172 and item 174. I suppose there is a 173 also somewhere and maybe a 175.

Yeah, kinda figured 172 was just the tip of the iceberg........they could be engy items but I highly doubt Valve would put them into the Steam Cloud this far before the engy update (going by their typical reveal method, there is still at least a week or so until we would actually get the engy items, even if they revealed it today), so chances are its a few more community items and a few more hats (some of the items seem to have a variable level, which Hats are known for doing, while others have a static level).

EDIT: Oh, and 173 is a spy item (forgot which), so it would not be a new one.

EDIT2: There we go, item 173 was a camera beard. This same thing happened to people right before the Camera Beard was released, when it did release, Unknown Item 173 turned into a Camera Beard.

"TF_ScoutWhoopee" "Whoopee Cap"

"TF_PyroMonocle" "Whiskered Gentleman"

"TF_MedicGoggles" "Ze Goggles"

"TF_MedicGoggles_Desc" "Nothing"

"TF_EngineerEarmuffs" "Safe'n'Sound"

"TF_DemomanTricorne" "Tippler's Tricorne"

"TF_SpyBeret" "Frenchman's Beret"

"TF_SniperFishingHat" "Bloke's Bucket Hat"

"TF_PyroHelm" "Vintage Merryweather"

"TF_SoldierDrillHat" "Sergeant's Drill Hat"

"TF_MedicGatsby" "Gentleman's Gatsby"

"TF_HeavyDorag" "Heavy Duty Rag"

haaats.jpg

Weapons:

Tribleman's Shiv (Sniper machete)

On hit: Bleed for 8 seconds

-35% damage done

c_wood_machete_sized.png

The Scotsman's Skullcutter (Demo melee)

+20% damage done

-15% move speed on wearer

c_battleaxe_sized.png

Weapons:

Tribleman's Shiv (Sniper machete)

On hit: Bleed for 8 seconds

-35% damage done

c_wood_machete_sized.png

The Scotsman's Skullcutter (Demo melee)

+20% damage done

-15% move speed on wearer

c_battleaxe_sized.png

I wonder if the new bleed effect shows through a cloaked spy, like Jarate does? If so, another sniper counter for spy! Apparently, the bleed effect does 64 damage, then whatever the normal melee hit is....

And I hope every demo starts using the new unlock, slowing a class with two primary weapons down would be nice.

EDIT: Better pic: http://www.pelipurkki.net/images/tf2_hattuu.jpg

Shows all the items (both weapons and hats) along with what class wears them, and in better quality.

Just an interesting note for the Shiv, if you hit a spy with it, non-DR spies constantly flash like they are being bumped into (along with blood dripping off them), and DR spies, while they do not flash, they still show blood dripping off of them. This may be a bug that is going to be fixed (as the DR currently removes fire, why wouldn't it do the same for the bleed effect?), but currently it is a great counter to spies. Plus, if you get a good solid hit or two on people, even without a crit, the bleeding is often enough to finish them off if they have no medic around or anything....making your more effective to counter the solo people that usually approach you from behind, as you can leave them bleeding to hopefully die if they do kill you.

This topic is now closed to further replies.
  • Posts

    • Microsoft's Copilot Cowork now generally available with usage-based billing by Pradeep Viswanathan Back in March, Microsoft first revealed Copilot Cowork, a new agentic AI experience in Microsoft 365 Copilot through which users can assign tasks to AI to complete in the background. After testing the service with a limited set of customers in Research Preview for a few weeks, Microsoft announced the general availability of Copilot Cowork to customers in the Frontier program on March 30. Today, Microsoft announced the general availability of Copilot Cowork worldwide for Microsoft 365 Copilot customers. The company also highlighted that Cowork became the fastest-growing feature in the history of its Frontier program. Unlike regular Copilot Chat, Copilot Cowork can run complex, long-running, multi-tool tasks from start to finish in the cloud by using organizational context through Work IQ. When compared to Claude Cowork, Microsoft claims that Copilot Cowork will be 30% to 40% cheaper on average with its Microsoft 365 connector. For now, Copilot Cowork runs on Anthropic models, including Opus 4.8 and Sonnet 4.6. However, Frontier customers can now use GPT-5.5. Microsoft also announced Cowork 1, a secure fine-tuned model coming in the next few weeks, which is designed to handle everyday Copilot tasks at a lower cost. To access Copilot Cowork, a Microsoft 365 Copilot user subscription is required. Usage is billed separately through Copilot Credits, based on model use, context retrieval, tool calls, and runtime. Pay-as-you-go pricing is set at $0.01 per Copilot Credit. To offer IT teams full control over usage costs, Microsoft provides spending limits, usage alerts, user-level controls, reporting, and prepaid usage plans for organizations. Usage-based billing begins today. However, Frontier customers who used Cowork between March 30 and June 16 will not be billed until July 1, 2026. The Microsoft 365 Copilot app now includes a toggle to enter the full Cowork experience. Microsoft is also adding partner plugins, with Enosix, Harvey, LSEG, Miro, monday.com, Moody’s, Morningstar, S&P Global Energy, and TeamsMaestro available now. Adobe, Atlassian, Box, Canva, Databricks, and others are coming soon.
    • With Nova enabled I am not seeing a difference with compactmode.show?
    • HOLY THREAD REVIVAL   But yes, look for browser.nova.enabled and set it to true
    • 5-year subscription to AdGuard VPN price-dropped now 90% off by Steven Parker Today's highlighted deal comes via our Apps + Software section of the Neowin Deals store, where you can save 88% off a 5-year subscription to AdGuard VPN. In the digital age where internet privacy is paramount, AdGuard VPN emerges as an essential tool. This virtual private network (VPN) is your encrypted gateway to the internet, helping your data stay secure and your online activities remain private, regardless of your location. More than just a privacy tool, AdGuard VPN is a robust solution packed with features that cater to a variety of internet needs. Why AdGuard VPN subscription deal over other VPNs: Exhaustive List of Locations: With 60+ locations available worldwide, you have the freedom to connect from anywhere you want, effectively bypassing geographically restricted content. Check complete list of servers here. Advanced Security Protocol: AdGuard VPN uses its own security protocol, guaranteeing a faster and safer VPN connection. This means you can browse, stream, and download with peace of mind knowing your data is secure. Zero-Logging Policy: Rest assured, your personal data is not collected and your internet traffic stays private at all times, thanks to AdGuard's strict zero-logging policy. Simultaneous Connections: Connect up to 10 devices simultaneously, providing protection for all your devices under just one account. Trusted Developer: AdGuard is a renowned name in the world of computer security, bringing their expertise and commitment to privacy and security to their VPN service. What You Get: Up to 10 devices connected simultaneously All locations Light-speed servers Unlimited data No logs policy Trusted developer Available on all platforms Privacy Created by a team from Russia, AdGuard software Limited is headquartered in Limassol, Cyprus. While the country does follow European privacy laws, it's not part of the 5/9/14 Eyes Alliance. Adguard may not properly work in China. Good to know Length of access: 5 years This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Device per license: 10 Access options: desktop & mobile Updates included 5- years of AdGuard VPN normally costs $359.40 without discounts, but it can be yours just $39.97, that's a saving of $324.43 (90%) off. For full terms, specifications, and license info please click the link below. Get this 5-year AdGuard VPN deal for just $34.97 (was $359.40) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • KillerPDF 1.5.1 by Razvan Serea KillerPDF is a lightweight, portable PDF editor for Windows built for users who want full control without subscriptions, installers, or telemetry. It runs as a single executable, making it ideal for USB use and field work. You can view PDFs with smooth PDFium rendering, navigate quickly with thumbnails, zoom, and shortcuts, and reorganize pages using drag-and-drop. It supports merging multiple PDFs, splitting documents, and extracting selected pages. KillerPDF also allows inline text editing with font matching to preserve the original layout, plus annotations like text boxes, freehand drawing, highlights, and reusable signatures. You can search full text, copy content easily, and print documents with flattened annotations. Designed as a free and open alternative to bloated PDF tools, it works fully offline on Windows 10/11 x64. No runtimes install. Everything needed is inside the EXE (targets .NET Framework 4.8, which ships with every supported Windows release). KillerPDF key features: High-quality PDF rendering via PDFium Edit PDF text inline (double-click to modify text) Page thumbnails and fast navigation with zoom and shortcuts Merge multiple PDFs into one Split PDFs and extract selected pages Drag-and-drop page reordering Font matching to preserve original document appearance Text boxes for notes Freehand drawing tools Highlight overlays with adjustable color, size, opacity Undo actions and clear per-page annotations Create, draw, and save reusable signatures Click-to-place signatures anywhere Full-text search with highlighted results Drag-select or Ctrl+A to copy text Print with annotations flattened Portable single-file app (~10 MB) No installer, no admin rights required No account, no telemetry KillerPDF 1.5.1 changelog: Performance Save Flattened PDF now uses multiple CPU cores. Page rasterization is parallelized (PNG encoding runs across cores; the PDFium render step stays serialized since the library isn't thread-safe), so large documents flatten significantly faster while the UI stays responsive (#68). Fixed PDFs that failed to open with "Unexpected EOF" now open (#72). The failure was PdfSharpCore's Flate inflater (SharpZipLib) rejecting the FlateDecode cross-reference stream on multi-revision PDFs - files that open fine in browsers, Acrobat, and Foxit. KillerPDF now detects this and re-opens the file losslessly through PDFium, preserving selectable text. Thanks to @javajon for the report and a detailed reproduction. Grid view renders every page. It was capped at the first 26 pages, so longer documents stopped loading partway through. Tiles also stream in progressively now instead of blocking until the whole document is rendered. Grid Ctrl+Scroll no longer reloads every page when the zoom is already at its limit and nothing would change. Removed a stray horizontal scrollbar (a thin green line) that could appear across the bottom of grid view. Files on UNC / network shares (including the WSL \\wsl$ filesystem) are copied locally before opening, avoiding partial-read failures on network filesystems. Changed Minimum zoom lowered from 10% to 5%, so grid view can pack more columns (helpful for wide/landscape pages) and single-page view can zoom out further. Download: KillerPDF 1.5.1 | 6.3 MB (Open Source) Link: KillerPDF Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      Console General earned a badge
      One Year In
    • One Year In
      Twozo Technologies earned a badge
      One Year In
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • Veteran
      branfont went up a rank
      Veteran
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      111
    4. 4
      Steven P.
      90
    5. 5
      Nick H.
      71
  • Tell a friend

    Love Neowin? Tell a friend!