[Guide] iPhone 2.x to 1.1.4 downgrade


Recommended Posts

Right. Heres all I can suggest and Its basically what Ive said before.

Using the patched ziphone on 1.1.4 should be easy. You dont need to unlock/jailbreak it to downgrade the baseband. If the patched ziphone doesnt want to downgrade then restore firmware 1.1.4 from itunes as described above. Keep trying. Sounds odd but sometimes a restore doesnt "sit" well with the iphone. Took me 2 goes to get it done, but it DOES work using this method.

post-139232-1216089842_thumb.jpg

On Mac OS X, xcode offers an option to downgrade the firmware on your phone/iPod. I'm not sure if it actually works, but if you're on OS X... Apple wouldn't provide a feature if it would break your phone, so why not give it a try? ;)

I'm more than happy with firmware 2.0 on my iTouch, though, so I'm not going to try it. Too much time wasted syncing music.

I know it's kinda off topic since this guide is to downgrade it.. but

If I have a jailbroken 1.1.4 and want 2.0, what should I do? Back when it was bought the carrier was not an official iphone one, but now it is, since it's the carrier with which they have released the iphone 3G. My guess is that if update it to 2.0 it would be locked? Would I be able to activate it officially?

OK...I followed this guide as I also upgraded to 2.0 without all the facts.

Until now, I was not able to restore to any firmware as I kept getting an itunes 1510 error.

I used this guide to downgrade my baseband and I was FINALLY able to do a complete restore of 1.1.4 without errors.

I then used ZiPhone to JB/Activate/unlock. So now I have a jailbroken iPhone, but no service. The phone appears to be activatedf because it appears in iTunes with my correct phone number, but I can not make or receive calls.

Any advice?

I do not see and edit button...

UPDATE:

A simple reset of all settings and a re-boot and I was estatic to see the AT&T logo again :)

Thanks for tis guide and the advice.

im in the same situation that you were in. For some strange reason i did everything the way i was told 2 do so, nd evrything works besiides one thing. i cant get my tmobile network to appear on my iphone. its not reading my sim card , do anyone have any suggestions???? ive been phoneless for the past 3 days. HHHHEEEELLLLPPPP

If like me, you thought that you could download version 2.0 of the firmware on a jailbroken iPhone (1.1.4) and get all the features, then you were in for a huge fall from grace. I found this out the hard way after spending no less than 18 hours SOLID on the internet, googling, posting on forums etc to get answers.

Now I thought I would make a guide to help people who might be in the same boat.

Don't forget, this shouldn't apply if your on the supported carriers, i.e. AT&T or O2. The iPhone should still work with them, but if not, then this guide will help.

This guide is for you if:

You can't seem to downgrade from 2.0 to 1.1.4, you did but you can't make or receive calls, if that's you skip to Step 6.

Shopping list

You will need the following:

iTunes 7.5 (NOT 7.7)

iLiberty+Windows / Mac

iPhone1,1_1.1.4_4A102_Restore.ipsw firmware.

KiPhone Windows / Mac (Patched version of ZiPhone)

A Little bit of luck (Sorry, no download link yet ;) )

Step 1:

Uninstall iTunes 7.7 if you have it and restart your computer

Step 2:

Install iTunes 7.5, iLiberty+ & KiPhone. Make sure only iTunes is running.

Step 3:

Your iPhone should be in 2 states, either stuck on the "Slide to make emergency calls" screen, or you tried to restore before and it's stuck on the new look "connect to iTunes" screen. Either way you're ok.

Enter the phone in DFU mode (You must have the iPhone connected to the computer and iTunes running). To do this, hold the power & the home button down for 9 seconds.

Why 9? Well people say 10, but it depends how slow you are at counting. Too short and it doesn't work, too long and the apple logo appears.

When you hit about 6/7 the screen should turn off, leave it for 2 more seconds and release the power button, STILL holding the home button. If all went well, you should NOT see an apple logo, the screen should be dead. Keep holding home until windows/Mac informs you that it's found new hardware, OR iTunes tells you that your iPhone is in recovery mode. Remember, screen should be blank.

If you see an apple logo, repeat the process for less time until you get it right. Took me a little time.

Step 4:

Shift/Option click the restore button in iTunes and select the iPhone1,1_1.1.4 firmware you downloaded.

Fingers crossed it should restore back to 1.1.4.

However, you WILL get an error message when restore is complete, something like (1005) or (1150) I can't remember. That's a good sign.

Step 5:

Your phone now should be "stuck" in restore mode, you should see the old type "connect to iTunes" screen.

Close iTunes and run iLiberty+. Click the Other Tools tab and select Jump out of recovery mode.

Keep your eye on the bottom right of the Liberty window; it should change from a flashing recovery mode, to disconnected, within about 5/10 seconds. If it does, that's a good sign. If it doesn't, you may need to hard reset the iPhone (holding power and home until screen goes off) and try again.

Once it kicks it out of recovery mode you should see the slide for emergency calls screen on 1.1.4.

Step 6:

This is crucial and here's a little back-story.

When you updated to 2.0, what a lot of people didn't realize, me included, is that it includes a new baseband file. This is the file which allows your iPhone to make/receive calls, text's etc. This is what caused me hours and hours of trouble as I couldn't figure out a way to erase it. The answer was sent to me on another forum and that is,

KiPhone!!

Now here's the problem. This guide is what I did up to this point, but what I then went on to do was to jailbreak the iPhone, Google some more and then I found I needed KiPhone.

You shouldn't need to jailbreak it to run KiPhone but if it fails to work, try it.

Run KiPhone and select downgrade baseband and debug boot. Hit start and your iPhone should restart and you should see lines of scrolling txt. It took a while, 5 minutes or so. (The only way I know of seeing if it worked instantly was by jailbreaking it first, that choice is up to you). Once done you will need to restore the iPhone one more time to 1.1.4 using iTunes. Shift clicking restore should do it, no need to put into recovery mode. (Why do you need to restore again? If you just jailbreak after downgrading the baseband, you can receive calls but not make any, only send texts but not receive any).

The test if it works is when restore is done; it should give you NO errors.

Step 7:

This is the hard part, run iLiberty+, select what options you want, select "Go For it" and wait. Once done you will be back using your trusty 1.1.4 iPhone in no time.

Phew.

Any questions, feel free to ask, I feel I've assimilated too much information on this in the past 24 hours.

im in the same situation that you were in. For some strange reason i did everything the way i was told 2 do so, nd evrything works besiides one thing. i cant get my tmobile network to appear on my iphone. its not reading my sim card , do anyone have any suggestions???? ive been phoneless for the past 3 days. HHHHEEEELLLLPPPP

I am new to iPhones and Apple. I am a x86 kind of guy, from Dos, to Windows 3.1 to the present XP.

I purchased my 1st Gen iPhone on eBay and it was unlocked.

In my haste to upgrade to V2.0, I failed to read about the Upgrade and the headaches it was causing people.

So I read and read and joined many sites and forums to try to get an answer to this problem when a Mod from another site suggested that I sign up to neowin. Glad I did.

It was when I read X's post that I realized that a lot of people were confused about placing the iPhone in DFU mode and not in Recovery Mode. Many Instructions on the Net and on You Tube make the mistake of instructing people to press the Power Button, Slide the Lock Button then holding the Home button to get the USB Cable to iTunes screen. This places the iPhone in Recovery mode, not in DFU Mode.

I am happy to report that I was able to Downgrade from 2.0 to 1.1.4, finally.

As I had posted before, everytime that I tried restoring to 1.1.4, I kept getting the Error(20).

All suggestions and instructions were to get the iPhone to DFU mode. Trust me, I tried over 100 times following what I thought was the proper procedure until I noticed that sometimes, after Holding the Power and Home button for 10 Seconds that when the USB hub reported the Apple Device it finally said in brackets Recovery(DFU) all other times it said recovery(iBoot).

So that is the message you need to see....(DFU).

Here are the steps that I followed to get me up.

1) I Installed iTunes 7.7 and restored to: iPhone1,1_2.0_5A347_Restore.ipsw

This got me to the Activation Screen.....

2) I uninstalled iTunes 7.7.

3) I went to Documents & settings/My Name/My Documents/My Music and renamed the itunes folder to iTunes Back up and installed iTunes 7.5

4) I placed the iPhone in DFU mode. I held the Power Button and Home button and counted to 10 Seconds. Several times the Apple Logo came up. Continue doing this till the Screen is Black (looks Dead)

5) I placed the iPhone in the Cradle which was connected to my PC Laptop. And held the Home button till the "New Device found" The USB hub and the Devices appeared ( in my case, the USB Wireless Modem and the Apple Device Recovery (DFU) ......This is important. if you see (iboot) in brackets , you are not in DFU mode but rather Recovery mode.

6) iTunes 7.5 recognised and logged on to the device ( iPod...this was weird)

7) I held down the <Shift> Key and clicked on the Restore button. I then Opened up iPhone1,1_1.1.4_4A102_Restore.ipsw

8) All previous attempts I made, after the 1st screen, where I kept getting the Error (20).......it gave no more error, kept on loading to the iPhone, Confirming etc....then I got the Error (1015). This was good news, from all I had read.

9) Following the Instructions of a few You Tube Videos, I download and installed winPNW and followed the instructions to no avail. I got the USB cable to iTunes Logo, everytime.

10) I then loaded up ZiPhone 3.0, placed the iPhone in Recovery Mode, Clicked Do it all and low and behold the iPhone reacted and a bunch of Code got written to the iPhone. In the end of the Process, I got the Earth Logo and the Unlock Bar, or was it the Battery Logo. Can't recall now.

I tested it and all was fine, but only had the 10 or so base Icons.

11) I ran ZiPhone 3.0 again, this time clicking on the 2nd option (Jailbreak) and the Installer was loaded.

I now have installed over 20 Applications........I was so excited that I went nuts. I will be unstalling a few. LOL

So there it is guys. Thanks to the work of many members in the iPhone Community (if I may call it that) I too was able to downgrade to 1.1.4 from 2.0.

SO now the question remains? When will I try updating to Ver 2.0? Not for a long time and not till there is an Unlock and Jailbreak fix for it. I have learned my lesson.

I wish all of you (that have not been able to downgrade from 2 to 1.1.4 yet) the best of luck.

Follow X's instructions or mine and hopefully you too will have your iPhone back from the DEAD.

Edited by tech07
Oh, I'm so so sorry. What does Shift/Option restore mean? I've never seen that before. I made it so itunes doesn't automatically come up when I plug in an ipod. How do I go back?

No need to apologize. No one knows everything about everything. We all have something to learn from time to time. LOL

When iTunes is opened, the Restore Button is available once the iPhone or iPod are connected to your Computer.

If you are using a Windows Based Computer, in order to Restore the File (iPhone) or iPod, one needs to Press the <Shift> Key then click on the Restore button in iTunes for the Files Screen in your Hard Drive to open up. THen by click on the desired file, it extracts and loads into the iPhone or Ipod.

If you are using a MAC ( I do not own one) the Options button is supposed to appear, to get your files.

To get the iPod to communicate with iTunes, I believe you need to place the device in Recovery or DFU mode.

Please read the other posts on this subject.

If you want it to connect automatically ( I am new to iTunes) I believe you can go to Preferences and click on that option....I think.

I hope this helps to clear up any confusion you had on this.

its me again, but i tried all of that and it keeps on telling me that my iphone can not be restored. i just figured out that my phone is missing the carrier option. when i go into my settings, i see where it says i see the airplane mode, and right under it theres the wifi option. but theres no carrier option nowhere in my phone. HHHEEEELLLLLPPPPP!!!!!! ITS NOW 4 DAYS NOW!!!

Thats because you still have the old baseband file. You still have wifi, use google to find the source for a app called bbinfo (i think). That tells you all about your baseband to be 100% sure.

Its what happened to me, keep trying with the baseband downgrade. It does work.

I think I am more lost then everyone here, I havnt even been able to make it past the first few steps.. here is my problem.

When i uninstall itunes 7.7 and reinstall 7.5 and plug my iphone in i get this error

"The iPHONE "iPHONE" cannot be used because it requires iTunes version 7.7 or later..."

Has anyone else gotten this error? I have a feeling it has something to do with the iTunes Library file, but not sure.. I need help bad!! Ive had my phone off now for 2 days, this has cause a bigger headache then i could ever imagine.. thanks in advance if anyone can help me here

hi, ive followed your tutorial step by step and ive now reached the point where i can get back into the phone, but cant get any network coverage. As i understand, this has something to do with having to downgrade the baseband?? I tried using the "ZiPhoneGUI - patched by kIREmK.exe" programme, but when i tick the boxes "downgrade baseband" and "debug boot" and press start, nothing happens, the programme just closes, and im no closer to my goal...

Has anyone else experienced/found a solution to this problem? Is there an other programme which is good for downgrading baseband from 2.0 to 1.1.4?

Thanks,

Chris

I think I am more lost then everyone here, I havnt even been able to make it past the first few steps.. here is my problem.

When i uninstall itunes 7.7 and reinstall 7.5 and plug my iphone in i get this error

"The iPHONE "iPHONE" cannot be used because it requires iTunes version 7.7 or later..."

Has anyone else gotten this error? I have a feeling it has something to do with the iTunes Library file, but not sure.. I need help bad!! Ive had my phone off now for 2 days, this has cause a bigger headache then i could ever imagine.. thanks in advance if anyone can help me here

Seems to me your not in DFU mode. You must be in DFU mode to downgrade the firmware. Remember, the screen must be blank. Hold home and sleep/wake until iphone turns off, wait a couple of seconds and then release only the sleep button, the screen should stay OFF. Then you can downgrade using itunes.

hi, ive followed your tutorial step by step and ive now reached the point where i can get back into the phone, but cant get any network coverage. As i understand, this has something to do with having to downgrade the baseband?? I tried using the "ZiPhoneGUI - patched by kIREmK.exe" programme, but when i tick the boxes "downgrade baseband" and "debug boot" and press start, nothing happens, the programme just closes, and im no closer to my goal...

Has anyone else experienced/found a solution to this problem? Is there an other programme which is good for downgrading baseband from 2.0 to 1.1.4?

Thanks,

Chris

Sent PM

If like me, you thought that you could download version 2.0 of the firmware on a jailbroken iPhone (1.1.4) and get all the features, then you were in for a huge fall from grace. I found this out the hard way after spending no less than 18 hours SOLID on the internet, googling, posting on forums etc to get answers.

Now I thought I would make a guide to help people who might be in the same boat.

Don't forget, this shouldn't apply if your on the supported carriers, i.e. AT&T or O2. The iPhone should still work with them, but if not, then this guide will help.

This guide is for you if:

You can't seem to downgrade from 2.0 to 1.1.4, you did but you can't make or receive calls, if that's you skip to Step 6.

Shopping list

You will need the following:

iTunes 7.5 (NOT 7.7)

iLiberty+Windows / Mac

iPhone1,1_1.1.4_4A102_Restore.ipsw firmware.

KiPhone Windows / Mac (Patched version of ZiPhone)

A Little bit of luck (Sorry, no download link yet ;) )

Step 1:

Uninstall iTunes 7.7 if you have it and restart your computer

Step 2:

Install iTunes 7.5, iLiberty+ & KiPhone. Make sure only iTunes is running.

Step 3:

Your iPhone should be in 2 states, either stuck on the "Slide to make emergency calls" screen, or you tried to restore before and it's stuck on the new look "connect to iTunes" screen. Either way you're ok.

Enter the phone in DFU mode (You must have the iPhone connected to the computer and iTunes running). To do this, hold the power & the home button down for 9 seconds.

Why 9? Well people say 10, but it depends how slow you are at counting. Too short and it doesn't work, too long and the apple logo appears.

When you hit about 6/7 the screen should turn off, leave it for 2 more seconds and release the power button, STILL holding the home button. If all went well, you should NOT see an apple logo, the screen should be dead. Keep holding home until windows/Mac informs you that it's found new hardware, OR iTunes tells you that your iPhone is in recovery mode. Remember, screen should be blank.

If you see an apple logo, repeat the process for less time until you get it right. Took me a little time.

Step 4:

Shift/Option click the restore button in iTunes and select the iPhone1,1_1.1.4 firmware you downloaded.

Fingers crossed it should restore back to 1.1.4.

However, you WILL get an error message when restore is complete, something like (1005) or (1150) I can't remember. That's a good sign.

Step 5:

Your phone now should be "stuck" in restore mode, you should see the old type "connect to iTunes" screen.

Close iTunes and run iLiberty+. Click the Other Tools tab and select Jump out of recovery mode.

Keep your eye on the bottom right of the Liberty window; it should change from a flashing recovery mode, to disconnected, within about 5/10 seconds. If it does, that's a good sign. If it doesn't, you may need to hard reset the iPhone (holding power and home until screen goes off) and try again.

Once it kicks it out of recovery mode you should see the slide for emergency calls screen on 1.1.4.

Step 6:

This is crucial and here's a little back-story.

When you updated to 2.0, what a lot of people didn't realize, me included, is that it includes a new baseband file. This is the file which allows your iPhone to make/receive calls, text's etc. This is what caused me hours and hours of trouble as I couldn't figure out a way to erase it. The answer was sent to me on another forum and that is,

KiPhone!!

Now here's the problem. This guide is what I did up to this point, but what I then went on to do was to jailbreak the iPhone, Google some more and then I found I needed KiPhone.

You shouldn't need to jailbreak it to run KiPhone but if it fails to work, try it.

Run KiPhone and select downgrade baseband and debug boot. Hit start and your iPhone should restart and you should see lines of scrolling txt. It took a while, 5 minutes or so. (The only way I know of seeing if it worked instantly was by jailbreaking it first, that choice is up to you). Once done you will need to restore the iPhone one more time to 1.1.4 using iTunes. Shift clicking restore should do it, no need to put into recovery mode. (Why do you need to restore again? If you just jailbreak after downgrading the baseband, you can receive calls but not make any, only send texts but not receive any).

The test if it works is when restore is done; it should give you NO errors.

Step 7:

This is the hard part, run iLiberty+, select what options you want, select "Go For it" and wait. Once done you will be back using your trusty 1.1.4 iPhone in no time.

Phew.

Any questions, feel free to ask, I feel I've assimilated too much information on this in the past 24 hours.

Hi, I start all the steps you said however when I put the phone ond DFU mode it does not come up the itunes or it does not say recovery mode. The screen is blank but nothing happens. While the itunes tries to open the iphone instead of giving one signal sound, it gives 3 quick one in a row.

I do not know what is happening, I would appreciate if anybody can help me.

If like me, you thought that you could download version 2.0 of the firmware on a jailbroken iPhone (1.1.4) and get all the features, then you were in for a huge fall from grace. I found this out the hard way after spending no less than 18 hours SOLID on the internet, googling, posting on forums etc to get answers.

Now I thought I would make a guide to help people who might be in the same boat.

Don't forget, this shouldn't apply if your on the supported carriers, i.e. AT&T or O2. The iPhone should still work with them, but if not, then this guide will help.

This guide is for you if:

You can't seem to downgrade from 2.0 to 1.1.4, you did but you can't make or receive calls, if that's you skip to Step 6.

Shopping list

You will need the following:

iTunes 7.5 (NOT 7.7)

iLiberty+Windows / Mac

iPhone1,1_1.1.4_4A102_Restore.ipsw firmware.

KiPhone Windows / Mac (Patched version of ZiPhone)

A Little bit of luck (Sorry, no download link yet ;) )

Step 1:

Uninstall iTunes 7.7 if you have it and restart your computer

Step 2:

Install iTunes 7.5, iLiberty+ & KiPhone. Make sure only iTunes is running.

Step 3:

Your iPhone should be in 2 states, either stuck on the "Slide to make emergency calls" screen, or you tried to restore before and it's stuck on the new look "connect to iTunes" screen. Either way you're ok.

Enter the phone in DFU mode (You must have the iPhone connected to the computer and iTunes running). To do this, hold the power & the home button down for 9 seconds.

Why 9? Well people say 10, but it depends how slow you are at counting. Too short and it doesn't work, too long and the apple logo appears.

When you hit about 6/7 the screen should turn off, leave it for 2 more seconds and release the power button, STILL holding the home button. If all went well, you should NOT see an apple logo, the screen should be dead. Keep holding home until windows/Mac informs you that it's found new hardware, OR iTunes tells you that your iPhone is in recovery mode. Remember, screen should be blank.

If you see an apple logo, repeat the process for less time until you get it right. Took me a little time.

Step 4:

Shift/Option click the restore button in iTunes and select the iPhone1,1_1.1.4 firmware you downloaded.

Fingers crossed it should restore back to 1.1.4.

However, you WILL get an error message when restore is complete, something like (1005) or (1150) I can't remember. That's a good sign.

Step 5:

Your phone now should be "stuck" in restore mode, you should see the old type "connect to iTunes" screen.

Close iTunes and run iLiberty+. Click the Other Tools tab and select Jump out of recovery mode.

Keep your eye on the bottom right of the Liberty window; it should change from a flashing recovery mode, to disconnected, within about 5/10 seconds. If it does, that's a good sign. If it doesn't, you may need to hard reset the iPhone (holding power and home until screen goes off) and try again.

Once it kicks it out of recovery mode you should see the slide for emergency calls screen on 1.1.4.

Step 6:

This is crucial and here's a little back-story.

When you updated to 2.0, what a lot of people didn't realize, me included, is that it includes a new baseband file. This is the file which allows your iPhone to make/receive calls, text's etc. This is what caused me hours and hours of trouble as I couldn't figure out a way to erase it. The answer was sent to me on another forum and that is,

KiPhone!!

Now here's the problem. This guide is what I did up to this point, but what I then went on to do was to jailbreak the iPhone, Google some more and then I found I needed KiPhone.

You shouldn't need to jailbreak it to run KiPhone but if it fails to work, try it.

Run KiPhone and select downgrade baseband and debug boot. Hit start and your iPhone should restart and you should see lines of scrolling txt. It took a while, 5 minutes or so. (The only way I know of seeing if it worked instantly was by jailbreaking it first, that choice is up to you). Once done you will need to restore the iPhone one more time to 1.1.4 using iTunes. Shift clicking restore should do it, no need to put into recovery mode. (Why do you need to restore again? If you just jailbreak after downgrading the baseband, you can receive calls but not make any, only send texts but not receive any).

The test if it works is when restore is done; it should give you NO errors.

Step 7:

This is the hard part, run iLiberty+, select what options you want, select "Go For it" and wait. Once done you will be back using your trusty 1.1.4 iPhone in no time.

Phew.

Any questions, feel free to ask, I feel I've assimilated too much information on this in the past 24 hours.

Hi, I start all the steps you said however when I put the phone ond DFU mode it does not come up the itunes or it does not say recovery mode. The screen is blank but nothing happens. While the itunes tries to open the iphone instead of giving one signal sound, it gives 3 quick one in a row.

I do not know what is happening, I would appreciate if anybody can help me.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Well I really think the repasting helped if your higher clocks have returned, maybe the next thing to look at is if there is a problem with your case airflow? I guess this because your 3080 has returned to optimal state, but is still staying too warm, which might suggest it was thermal throttling before you repasted, of which the only logical conclusion could be outside factors.
    • Samsung Galaxy Z Fold 8, Flip 8, Z Fold Wide: Everything you need to know by Hamid Ganji Galaxy Z Fold 7 - Image via Samsung The next generation of Samsung foldables is set to be unveiled next month at the second Unpacked event of the year. Samsung’s 2026 foldables are not expected to offer significant upgrades over their predecessors, with the Korean firm instead focusing on design refinements and conventional upgrades such as faster processors and better cameras. However, Samsung is reportedly planning to unveil an all-new passport-style foldable this year to rival Apple’s first foldable iPhone, which is expected to debut this September. Here’s a roundup of everything we know about Samsung’s upcoming foldable devices ahead of their official debut. When can we expect Samsung’s new foldables? The Galaxy Z Fold 7 and Z Flip 7 series were unveiled in July, and Samsung is expected to maintain this timeframe in 2026. Based on previous reports from Korean sources, Samsung will hold its Unpacked event on July 22 in London, UK, to pull back the curtain on the Galaxy Z Fold 8 series. The devices are also expected to hit the shelves a few weeks after launch. However, Samsung has yet to announce an official date. A new naming scheme? One of the most interesting changes we might see this year is a new naming scheme for Samsung’s latest foldables. SamMobile reported that since Samsung is expected to unveil three foldables this year, it has adopted a new naming strategy to simplify product identification for customers. Accordingly, the standard Galaxy Z Fold 8 will reportedly be called the Galaxy Z Fold 8 Ultra and will serve as the direct successor to last year’s Galaxy Z Fold 7. The “Ultra” suffix suggests the phone could feature higher-end specifications, such as additional rear camera modules. Samsung’s new passport-style foldable is expected to carry the Galaxy Z Fold 8 name without any suffix. This model is reportedly equipped with two rear cameras. No major changes are expected for the Flip model. Galaxy Z Fold 8 Ultra and Z Flip 8 anticipated specs Rumors over the past few months suggest Samsung is preparing several upgrades for its upcoming foldables, although the devices may continue to rely on larger batteries and faster charging speeds rather than dramatic design changes. The primary focus this year is expected to be the Galaxy Z Fold 8 and its wide-screen design. Galaxy Z Fold 8 Ultra official CAD renders - Image via AndroidHeadlines Here are the anticipated specifications for the Galaxy Z Fold 8 Ultra based on previous leaks: 6.5-inch outer display and 8-inch inner display, 120Hz refresh rate, and 2,600 nits peak brightness Snapdragon 8 Elite Gen 5 processor, paired with 12GB or 16GB of RAM and 256GB, 512GB, or 1TB of storage 4.1mm thickness when unfolded and a weight of 210g 200MP main camera, 50MP ultrawide camera, 10MP or 12MP telephoto camera, 10MP cover camera, and 10MP selfie camera 5,000mAh battery with 45W wired charging Android 17 and One UI 9 As for the Galaxy Z Flip 8, the device is not expected to be a major departure from its predecessor, although it could become slightly slimmer. Expected specifications include: Snapdragon 8 Elite Gen 5 or Exynos 2600 processor 12GB of RAM with 256GB and 512GB storage options 6.9-inch Dynamic AMOLED 2X inner dispaly and 4.1-inch Super AMOLED outer dispaly 50MP main camera, 12MP ultrawide camera, and 10MP selfie camera 4,300mAh battery with 25W wired charging Android 17 and One UI 9 Samsung’s foldables are also expected to launch with Gemini Intelligence, Google’s AI suite for automating tasks in Android ecosystem. Moreover, given current memory and component costs, some Galaxy Z Fold 8 Ultra and Z Flip 8 variants could see a price hike. Galaxy Z Fold 8 adopts a wide-screen design The centerpiece of the upcoming Unpacked event could be the Galaxy Z Fold 8, previously rumored as the Galaxy Z Fold Wide. This model adopts a passport-style form factor and is expected to compete directly with Apple’s iPhone Fold. Galaxy Z Fold 8 official CAD renders - Image via AndroidHeadlines Here’s what to expect: 7.6-inch primary OLED display and 5.4-inch cover display, 120Hz refresh rate, 2,600 nits peak brightness, and 4:3 aspect ratio Snapdragon 8 Elite Gen 5 processor, 12GB or 16GB of RAM, and 256GB, 512GB, or 1TB storage options 4,800mAh battery with 45W wired charging 50MP main camera, 50MP ultrawide camera, and 10MP selfie camera Android 17 and One UI 9 The three new foldable phones are unlikely to be the only devices unveiled at Samsung’s Unpacked event. The company is also expected to introduce the Galaxy Watch Ultra 2 and the Galaxy Watch 9 series.
    • Thanks
    • 7 Days: Killing uBlock Origin bypasses, Euro Office faces fire, and will AI replace you? by Aditya Tiwari 7 Days is a weekly roundup of picks of what's been happening in the world of technology - written with a dash of humor, a hint of exasperation, and an endless supply of (black) coffee. This week's highlights include WWDC 2026 announcements, updates on child safety, and Meta's use of data from outside businesses to optimize your feed. Let's get started. You can check out the recent issues of the 7 Days weekly roundup. Killing uBlock Origin bypasses The hottest news of the week was about Google Chrome effectively ending most uBlock Origin workarounds (a free, open-source ad blocker extension) by permanently dropping MV2 extensions and their bypasses. Chrome is transitioning towards newer MV3 extensions. A recent discussion thread highlighted how the latest and upcoming versions of the most popular browser are expected to be its final releases with support for MV2 extensions. Genuinely European? Euro-Office faces fire The recently launched cloud-based office suite, Euro-Office, is facing criticism at home. The LibreOffice developer wrote an open letter criticizing Euro-Office for its marketing claim that it's the "first open-source office suite developed in Europe," since the honor has belonged to OpenOffice since 2001. The Document Foundation has called out Euro-Office, arguing that it can't consider "itself genuinely European" as long as it keeps pushing Microsoft defaults on users, adding that "it has to speak ODF as its mother tongue." Will AI replace you? Image: Tara Winstead via Pexels Microsoft's AI boss, Mustafa Suleyman, said in an interview earlier this year that AI would replace office workers within 12 to 18 months. Joining the ranks of top executives who have softened their stance on AI replacing humans, Suleyman recently walked back his earlier remarks and now says that AI will automate tasks, not replace entire white-collar jobs. He defended his earlier comments by arguing that they referred only to individual actions people perform at their desks. Louis Rossmann wants to sue Samsung Image: Louis Rossmann Tech repair entrepreneur and right-to-repair activist Louis Rossmann contacted Samsung support over a failed 4TB Samsung 990 Pro NVMe SSD. After back-and-forth communication, Samsung offered a $330 refund instead of a replacement, but Rossmann found that the SSD was readily available for new buyers at a higher price. He has issued a formal 60-day notice and intends to file a suit in Texas small claims court, as Samsung's actions reflect a failure to honor its warranty obligations. Samsung reached out to Neowin to clarify its updated stance that customers in such situations will receive a refund equal to the product's current market price. Child safety or mass surveillance? Image: Jonathan Borba via Pexels Signal accused the UK government of using child safety and device-level explicit content ban as a cover for mass surveillance. Calling the plan "dystopian," Signal warned that it violates everyone's fundamental right to privacy. The messaging platform believes that the government should keep children "safe" and "protected," but it should do so through social services and education. Fears of social media regulation Image via DepositPhotos.com More governments across the globe are tightening their grip on social media and bringing stricter regulations in the name of child safety. Bluesky COO, Rose Wang, warned that social media regulations could destroy competition from small startups and that heavy regulatory compliance costs favor deep-pocketed tech giants while locking out new entrants. Our Features Image: Pexels Our coffee-powered team publishes a platter of editorials, opinion posts, and guides. Here's what they got for the week: UK **** blockers are a looming privacy disaster, we must be able to see the source code This week in software news Image: Proton Catch up on some of the latest software news updates that arrived throughout the week: Dark clouds over PC makers: Building on our report from last month, Dell officially acknowledged that its own remediation software was causing BSOD issues and unexpected system restarts. HP is also facing equally frustrating issues involving recent Windows Secure Boot updates on Windows 11. Controversial icon: Spotify finally removed the disco ball icon from its app and replaced it with the familiar flat green logo after weeks of mixed reactions online. While some people don't like the new design, the retro, three-dimensional look has generated a following of its own. Even other brands are coming up with their versions of the disco logo. NVIDIA fixes stuff: A new hotfix driver 610.52 fixes various issues related to monitors and displays, noting that G-SYNC-related frame pacing troubles should now be resolved on Ada Lovelace GPUs. The feedback thread also points out that the hotfix patches a BSOD issue. FIFA World Cup tracker: Opera is redesigning its Android browser with a built-in football tracker for the upcoming World Cup in the US. The new homepage is now "more immersive" with easier access to common browser features. Command line for Proton: The Swiss technology company has launched a command line version of the Proton Drive, which you can use to manage your encrypted files directly from a terminal across all major platforms, including Windows, macOS, and Linux. This week in hardware news Image: Thermaltake Catch up on some of the latest software news updates that arrived throughout the week: Intel and AMD PCs in one case: Thermaltake's CAPO X dual-system chassis brings you the best of both worlds by supporting two microATX (mATX) motherboards and up to two 360 mm AIO liquid coolers. If you want ideas, maybe you can use one as your main PC and another as an AI agent. Google Tensor production: While TSMC will remain the lead producer, the search giant is reportedly in talks with Samsung to hand over part of the production of its next-generation Tensor AI chips. The upcoming TPUs are reportedly codenamed “Icefish” and will be produced using Samsung's 2-nanometer process technology. Lethal fake phone chargers: UK-based consumer rights organization Which? has warned that "potentially lethal knock-off chargers" are still being sold on online marketplaces, including Amazon and eBay, despite the dangers of such chargers having been exposed. This week in Google News Image: Google Catch up on some of the latest Google news updates that arrived throughout the week: Sliding into DMs: You might remember that YouTube had a direct messaging feature back in the day. It's now rolling out a revamped direct messaging inbox that lets you share Shorts, videos, and live streams and have conversations about them. New in NotebookLM: The AI-powered note-taking app got some new agentic capabilities and more advanced reasoning, thanks to support for Gemini 3.5 and Antigravity. NotebookLM can now generate outputs in more formats, making it easier to start new projects with less information. This week in Apple News Image: Apple Catch up on some of the latest Apple news updates that arrived throughout the week: WWDC 2026: This week was all about Apple's annual developer conference, where the iPhone-maker finally unveiled an upgraded Siri AI and a platter of new Apple Intelligence features. Siri AI now has a cross-platform app, which is supported on select models of iPhone, iPad, Mac, Apple Watch, and Vision Pro. What's different about WWDC: I wrote a detailed feature this week discussing how Apple changed the WWDC keynote this year, blurring the lines between its operating systems. Apple didn't have dedicated segments for its operating systems this year and didn't even publish the official press releases. Liquid Glass slider (finally): It's that time of the year when Apple previews fresh updates for iPhone, iPad, Mac, Apple Watch, AirPods, and other platforms. A new transparency slider for Liquid Glass is coming to iOS 27, iPadOS 27, and macOS 27 Golden Gate. Is your device supported?: If you're wondering whether your Apple device supports the new developer beta builds, you can check the respective compatibility lists for iOS 27, iPadOS 27, macOS 27, and watchOS 27. Siri AI not coming to Europe: Yes, that's true due to complications related to the Digital Markets Act (DMA). While Apple penned a blog post to tell its side of the story, a European Commission spokesperson told Neowin that the DMA does not prohibit Apple from launching its services in the EU; the company is simply required to comply with the law. New child safety features: Apple announced a trove of new safety features for kids, including a simpler setup experience for parents, Ask to Browse, Time Allowances, and a redesigned Screen Time UI. Parents can now visit a new website to find answers to common questions around child safety features. More cloud power: Apple's Private Cloud Compute cloud infrastructure will now run beyond its own data centers for the first time. It's working with Google and NVIDIA to run new Apple Intelligence workloads on Google Cloud systems powered by NVIDIA GPUs. This week in Meta news Catch up on the latest Meta news updates that arrived throughout the week: Data from outside: Meta is rolling out a new update globally to personalize your AI responses and primary feeds using data from outside businesses. It already targets ads based on shopping activity, but the latest development enables it to personalize other "parts of your experience." There is a toggle in the Settings to disable activity from other businesses; however, it won't prevent companies from sending your data to Meta. Level playing field: The European Commission has ordered the social media giant to restore access to WhatsApp for third-party AI chatbots, including ChatGPT and Copilot. Meta previously blocked rival AI chatbots from operating on WhatsApp, prompting the Commission to launch an antitrust investigation. Spying on users: On the flip side, WhatsApp accused the Israeli cyber-intelligence firm, NSO Group, of deploying a fresh wave of targeted "spear phishing" attacks against its users, which were thwarted by WhatsApp's security teams. Reorder profile grid: Adding some customization for the profile grid feature, Instagram now lets you rearrange posts in your profile without deleting and reuploading content. Go to your profile and long-press any thumbnail to find the "Reorder grid" option. This week in AI news Catch up on the latest artificial intelligence news updates that arrived throughout the week: Claude RAM hogger: Windows users are getting infuriated by Claude Desktop's hidden 1.8GB Hyper-V VM bug, which spins up if you use Claude Cowork or agent mode even once. It shows a Vmmem process in Task Manager, indicating 0% CPU usage but 1.8GB of RAM usage. Claude Fable 5: The new state-of-the-art AI model from Anthropic beats OpenAI's ChatGPT-5.5 in multiple AI benchmarks. Claude Fable 5 sits above the Opus models and outperforms most other generally available models across knowledge work, vision, scientific research, and more. However, the model was abruptly suspended after receiving an export control directive from the US government. Stack Overflow for AI agents: The popular Q&A platform has launched Stack Overflow for Agents in beta, which AI agents can use to share, find, and reuse coding knowledge. It explained that AI agents operate in isolation, creating an Ephemeral Intelligence Gap, and valuable tokens are wasted on something another agent has already solved. Upgrading Codex: OpenAI is buying a company called Ona, which makes secure cloud execution and orchestration technology for developers. The ChatGPT-maker aims to make Codex agents run for days without being tied to a local machine or an active session. It also announced a new developer mode in Chrome. This week in open-source news Catch up on some of the latest open-source and Linux updates that arrived throughout the week: Linux 7.1 rc7: Linux Torvalds dropped an optimized rc7 with crucial fixes for AMD and laptop hardware. He said that a stable version of Linux 7.1 could arrive next week, adding that the latest RC is not small, but smaller than recent releases. Alpine Linux 3.24: The latest Alpine Linux release added support for COSMIC Desktop, Linux 6.18, IPv6 installer support, automatic serial console configuration for headless setups, and major package updates and removals. This week in Microsoft News Microsoft had to shut down more than 70 GitHub repos after they were compromised by malware, Teams is getting a controversial tracking feature that users may hate, and the company explained why the new update makes PowerToys faster. You can check out Taras's freshly baked Microsoft Weekly roundup to catch up on all the interesting stories this week. This week in gaming The latest issue of Pulasthi's Weekend PC Game Deals curates several exciting games on sale this week. On the Epic Games Store, the new titles on display for grabs include Warhammer 40K Speed Freeks and The Ouroboros King. NVIDIA GeForce NOW's summer sale lowered the prices of both the Performance and Ultimate membership options for a limited time period. Meanwhile, the Xbox Free Play Days brought Undead Labs' post-apocalyptic title State of Decay 2, as well as two Team17-published titles. That said, here are some more stories from the gaming world: Dragon's Dogma 2: Dark Arisen expansion to bring snowy region, new updates also coming Playground drops 30 minutes of Fable gameplay, shows off life sim and morality system Playground Games confirms Forza Horizon 6 save wipe bug Doom: The Dark Ages Revelations expansion gives the Slayer a brutal Chain Spear State of Decay 3 is out in 2027, reveals Plague Nests with new co-op gameplay trailer From the review corner This week, Taras got his hands on the DuRoBo Krono portable e-ink reader, which comes with a $279 price tag. It's a smartphone-sized device with a rotating dial, sitting somewhere between premium and cheap in terms of build quality. Speaking of the pros, the physical controls are cool, the smart dial is useful, the battery life is good, and Android 15 has no-nonsense software. On the flip side, the device lacks software customization, the built-in AI needs improvement, the smart dial is a bit wobbly, and there is no ambient light sensor. EA Sports UFC 6 EA Sports UFC 6 does a better job at onboarding new players than most fighting games, according to Pulasthi's detailed review. The game comes with rewarding combat systems, top-notch animation, impressive impact physics, and visible damage on fighters. However, the menus lag a lot, grappling isn't very fun, and the flow state feels a little misplaced. More price drops! We got you covered with some hot tech deals all week. For some reason, if you missed out on a great discount, here is a summary of some recent deals that are still alive: GIGABYTE Radeon RX 9070 XT Gaming OC ICE 16G - $649.99 (13% off) 1TB Samsung T7 Portable SSD - $189.98 (31% off) AirPods Pro 3 - $179 ($50 off) Edifier R1280Ts Powered Bookshelf Speakers - $129.99 (24% off) To view all of our recent deals, click here. So, these were some of the biggest tech news and other updates from this week. There will be more issues of our 7 Days series in the coming weeks and months, so stay tuned. You can also support Neowin by registering for a free member account or subscribing to extra member benefits, along with an ad-free tier option. Have a great weekend!
  • Recent Achievements

    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      197
    3. 3
      PsYcHoKiLLa
      141
    4. 4
      ATLien_0
      89
    5. 5
      Steven P.
      80
  • Tell a friend

    Love Neowin? Tell a friend!