FarCry 2 - Low FPS?


Recommended Posts

Hey, I recently upgraded my CPU, GPU and RAM. I've been using my PC fine for over a month now and I've been playing CS:S and DOD:S with good FPS.

My specs: e6850 @ 3ghz, 4870, 4gbs ram.

Occasionally my FPS in DOD:S will drop dramatically down to below 15 for a second or two but then it goes right back up to normal (I think this might be due to the graphics card not getting enough power, but that's just a guess) but apart from that, everything has been fine.

Yesterday I installed FarCry 2 and I was getting really crappy FPS. I tried different drivers including the hotfix but none of them made any difference. I decided to reformat since I changed from an Nvidia card to ATI, I thought perhaps remnants of the nvidia drivers were interfering.

After reformatting and installing the latest drivers I'm still getting the exact same performance. I can't figure it out. People with worse specs than mine are getting better performance on very high than I'm getting on LOW!

Benchmarks from FC2:

LOW:

http://img65.imageshack.us/my.php?image=fc2benchfj6.jpg

HIGH:

http://img528.imageshack.us/my.php?image=fc2bench2zb9.jpg

If anyone has any ideas on how I can fix this, or how I can test if it's a hardware fault - please tell me. I really have no clue what to do now.

Link to comment
https://www.neowin.net/forum/topic/687294-farcry-2-low-fps/
Share on other sites

I have a shuttle SD39P2 with a 400w PSU. Here's the specs: http://eu.shuttle.com/en/desktopdefault.as...170_read-13828/

Don't think 400w isn't enough. The shuttle PSUs are known for being able to handle much more than standard PSUs. Just have a look here

Although I won't rule out the possibility that I have a faulty one.

I'm on 32bit Vista with all the latest drivers installed.

Edited by eviljedi
Occasionally my FPS in DOD:S will drop dramatically down to below 15 for a second or two but then it goes right back up to normal

could do this ingame or out of game it probly wont matter, but open task manager and sort tasks in ascending by CPU Usage and watch it for around a minute and see if anything other than System Idle Process jumps up to like 40-50% Usage. it may be one of the svchost.exe's. if it is, get Process Explorer and check out which service that associated svchost.exe is hosting and try disabling that service and then check the FPS in the game.

my case i was getting that exact symptom and tracked it to DNSClient service so i disabled it and had no problems after that.

if the problem still happens then you can reenable the service that you disabled.

Comparing a game in source engine to farcry 2 lawl, source engine is from like 2002 or something, and it wasen't the best then, my integrated laptop can run it, but it can't run far cry 2 in half a fps a minute, so i don't see any comparison here.

Comparing a game in source engine to farcry 2 lawl, source engine is from like 2002 or something, and it wasen't the best then, my integrated laptop can run it, but it can't run far cry 2 in half a fps a minute, so i don't see any comparison here.

Well those are the only other games I've played so I can only compare it to them.

odd my friend has a 4870 and the 8.10 drivers and gets 40 fps on ultra with 4xaa. Did you try the ati hotfix? Are you playing in dx 9 or 10? dx10 has better performance for me.

Quad Core here with a 8800GTS, and I get a terrible fps with things set to there lowest option.

...people wonder why games get pirated

I can run ultra with 2xaa on a 9600gt, what drivers are you running?

be interesting to know what background services you have running :)...

Nothing abnormal. I tested it on a clean install with only the windows updates and ati drivers added.

I took my 4870 and put it in my other pc (e4400 @ 2.4Ghz, 2gbs ram, 300w psu, vista sp1) to see if I noticed any performance differences. I also tried running the benchmark with my old 8600GTS. Both graphics cards were using the latest drivers.

4870:

HIGH, 1024x768:

http://img201.imageshack.us/my.php?image=atihighke6.jpg

LOW, 1024x768:

http://img261.imageshack.us/my.php?image=atilowol7.jpg

8600GTS:

HIGH, 1024x768:

http://img293.imageshack.us/my.php?image=nvidiahighno9.jpg

LOW, 1024x768:

http://img119.imageshack.us/my.php?image=nvidialowpr7.jpg

Only a 10FPS increase from the 8600GTS really sucks. Maybe FC2 is just **** with ATI but I've seen other people posting saying they are running it fine. Maybe I've got a dud card? Or perhaps it's just the CPU limiting these results. I still have no idea...

Edited by eviljedi
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • BrowserOS 0.46.0 by Razvan Serea BrowserOS is a free, open-source Chromium-based browser that runs AI agents natively, offering a smarter, more productive browsing experience. It supports Chrome extensions and integrates AI agents to automate tasks, fill forms, and streamline workflows. Your data stays on your computer: you can use your own API keys or run local models via Ollama, making it a privacy-first alternative to tools like Perplexity, Comet, or Dia. With built-in productivity tools and app integrations, BrowserOS boosts efficiency while keeping control firmly in your hands. Being Chromium-based, BrowserOS lets you effortlessly import your bookmarks, passwords, and Chrome extensions in just a few clicks. BrowserOS works with OpenAI GPT models, Anthropic Claude, Google Gemini, and local AI models via Ollama or LMStudio. You can use your own API keys and effortlessly switch between providers. BrowserOS Agent Your AI productivity assistant that organizes and manages your browsing effortlessly Quickly list, group, or close tabs Save and resume browsing sessions Search your history and organize bookmarks Switch instantly to the tab you need BrowserOS Navigator – Automate web tasks with ease Navigate websites and search automatically Interact with pages without manual effort Handle repetitive tasks in seconds What makes BrowserOS special Feels like home - same familiar interface as Google Chrome, works with all your extensions AI agents that run on YOUR browser, not in the cloud Privacy first - bring your own keys or use local models with Ollama. Your browsing history stays on your computer Open source and community driven - see exactly what's happening under the hood MCP store to one-click install popular MCPs and use them directly in the browser bar (coming soon) Built-in AI ad blocker that works across more scenarios! BrowserOS 0.46.0 changelog: Run Claude Code & Codex right in your browser — We've extended the agent harness to bring full coding agents into BrowserOS. Claude Code and Codex now come bundled and plug straight into the assistant, so you can drive your browser with the agent — and the subscription — you already use. A brand new experience — A redesigned new tab, a calmer composer, and a rebuilt command center for switching between agents. The whole assistant is cleaner, faster to reach, and easier to live in. New MCP tools — We rebuilt the browser tool surface from the ground up — a tighter, more reliable set of tools for agents to drive the browser. Plus one-click install of BrowserOS as an MCP server into the agents you already run, with automatic URL sync. Chromium 148 — Updated to the latest Chromium base with all recent upstream fixes and security patches. Streamlined — We've pulled back a few features that weren't getting much use — Skills, Soul, and Memory — so we can focus and ship better versions of them soon. Download: BrowserOS 0.46.0 | 181.0 MB (Open Source) Download: BrowserOS for macOS | 485.0 MB Links: BrowserOS Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      590
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!