FarCry 2 - Low FPS?


Recommended Posts

I have this problem with COD 4. Always did after my first reformat after i installed it.

Basically after the first time i played it each time frames drop. Dont know why tothis day, jsut live with it.

I get 120 average frames in CS:S, go to Crysis I get 45 Average. COD 4 i get 29 as soon as i enter a server with like 5.

Seriously. But I tried everything and the only way i can fix it is if i m ake sure the "Dual Video Card" option is Yes.

Even though i dont have dual vids. If I do that, i get 55-80 fps average in a Server full of people.

----------------------

Offtopic to OP/Anybody:

How did you get that graph? That is much easier to diagnose then having to screenshot in game of fps and etc etc.

Very very strange, i've got a Q9450 CPU /w 8GB DDR2 RAM and ATi 4850 and I get about 70-120 FPS @ 720p

Humour me, what anti virus are you running?

AVG. I had NOD32 before reformatting and it was just the same.

Offtopic to OP/Anybody:

How did you get that graph? That is much easier to diagnose then having to screenshot in game of fps and etc etc.

It's from the farcry 2 benchmarking tool. It's located in the same folder as the fc2 .exe

Do you have problems playing Crysis? or seeing this particular issue?

Is it possible to run the game in DX9 mode? I'm under the impression that running games in DX10 mode automatically applies 4XAA.

I'm not sure, but isn't 400W a little too on the light side for a 4870? What's the listing for the amps on each rail?

its your power supply it is too weak thats why the low fps

* PCI Express? based PC is required with one X16 lane graphics slot available on the motherboard

* 500 Watt or greater power supply with two 75W 6-pin PCI Express? power connectors recommended (600 Watt and four 6-pin connectors for ATI CrossFireX? technology in dual mode)

* Certified power supplies are recommended. Refer to http://ati.amd.com/certifiedPSU for a list of Certified products

* Minimum 1GB of system memory

* Installation software requires CD-ROM drive

* DVD playback requires DVD drive

* Blu-ray? playback requires Blu-ray drive

* For a complete ATI CrossFireX? system, a second ATI Radeon? HD 4870 graphics card, an ATI CrossFireX Ready motherboard and one ATI CrossFireX Bridge Interconnect cable per graphics card (included) are required

I'm not sure about Crysis. I'll see if I can get a copy to test it out. In those benchmarks I'm running FC2 in DX9 mode, in DX10 it goes below 10FPS.

I know about the power supply requirements for the 4870 but others with shuttles with the same PSU as me have reported no problems running 4870s, GTX 260s and even 280s. How do I check the listing for the amps on each rail?

I'm not sure about Crysis. I'll see if I can get a copy to test it out. In those benchmarks I'm running FC2 in DX9 mode, in DX10 it goes below 10FPS.

I know about the power supply requirements for the 4870 but others with shuttles with the same PSU as me have reported no problems running 4870s, GTX 260s and even 280s. How do I check the listing for the amps on each rail?

You can get an Amp Metre what can measure the amps/voltages while the system is running, or you can use Speedfan or a similar utility which can monitor the rails, but the Amp/Volt Metre would give you more reliable results.

Based on the shot of your sticker you have only 16 amps on the 12v rail. That does not seem good enough for a 4870. I would get a better PSU.

Edit - just noticed you said the sticker looks like this, only is 400w. Are all of those numbers the exact same otherwise? That is only a 250w psu shown.

Here are some benchmarks I did on Crysis Warhead:

DirectX 9.0c PERFORMANCE 1X @ Map: ambush @ 0 1680 x 1050 AA 0xx

==> Framerate [ Min: 47.85 Max: 133.75 Avg: 68.55 ]

DirectX 9.0c GAMER 1X @ Map: ambush @ 0 1680 x 1050 AA 0xx

==> Framerate [ Min: 7.73 Max: 50.20 Avg: 35.66 ]

DirectX 9.0c ENTHUSIAST 1X @ Map: ambush @ 0 1680 x 1050 AA 0xx

==> Framerate [ Min: 6.47 Max: 32.38 Avg: 25.00 ]

It seem to be running better than FC2 but the min FPS is a little worrying on gamer and enthusiast. It also seems quite "sticky", it frequently freezes for 0.5 second or so, especially on the higher settings. It also freezes like this when I cross checkpoints but I assume that's just the saving to the HD that's causing that.

You need more than just rail distribution, you need to provide us with the combined wattage allocated to each rail (for your specific PSU, not the 250W model)

Otherwise there is no way for us to calculate the combined amperage provided on the +12v rail because you have multiple +12v rails on your PSU.

Edited by shift.
  • 4 weeks later...

Hi everyone,

Well I have the same problem with the guy who uses a rabbit as his picture...

I get an average of 40 fps for the ranch small test (with a 30 fps low, and 60 fps high).

My system specs:

E4400 @ 3Ghz

2 go gskill 3-3-3-8 at 666mhz

asus p5n e sli (motherboard)

ati 4850 @ 680mhz/1100mhz.

I used 8.11 drivers for the tests. I noticed that if i max out everything for the gunfire test, i got a vpu recovery...

I get rid of this problem by just installing the driver without CCC (a big piece of junk).

I think something is bottlenecking the game... maybe the cpu or the ram. dont know.

By the way, rabbit guy, do u used a cracked version of Farcry 2? I do, maybe that is the cause of the low frame rates and i'll be buying the game...

see u.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft confirms Windows 11 26H2, urges IT admins to prepare for release by Usama Jawad Windows 11 typically follows an annual update cycle, but Microsoft recently broke that tradition a bit by releasing a "26H1" version in the first half of this year as a "scoped" build for select new silicon PCs only. This version was not available for customers using 24H2 and 25H2 builds, as Microsoft is busy preparing version 26H2 for them, confirmed officially for the first time. In a Windows IT Pro blog, Microsoft has urged IT admins to prepare for the upcoming release of Windows 11 version 26H2. The company has confirmed that this will be a small enablement package (eKB) that will simply light up certain disabled features that are already present in the operating system's code base. This means that the "refined" Windows update and deployment experience will be simpler and quicker, with minimal disruptions, as the feature update will simply toggle a few flags rather than performing a complete replacement. Microsoft has explained that this is all possible because the standard Windows 11 releases share the same servicing branch and hence, the same source code. However, this also means that Windows 11 26H1 users won't be able to upgrade to 26H2 as that is a different branch, but this is something we have known for a while now. Similar to previous annual feature updates, Windows 11 26H2 will offer the following support cycles: 24 months of support for Home, Pro, Pro EDU, and Pro for Workstations editions 36 months of support for Enterprise, Education, IoT Enterprise, and Enterprise Multi-session editions Microsoft has not confirmed a concrete release date for Windows 11 26H2, but noted that it is "coming soon". If we go by the ongoing release cadence, we can expect it to begin rolling out in early October 2026. As such, IT admins have been encouraged to begin validating Windows Insider releases in the Experimental Channel, plan rollout rings, and strategize the utilization of their existing deployment tools.
    • Windows 11 gets new audio improvements in the latest builds by Taras Buria Today's Experimental builds (26H1 and Future Platforms, formerly Canary) pack several audio-related improvements. If your device is enrolled in the Experimental Channel (26H1), you can download build 28120.2315, while those in the Future Platforms version have build 29613.1000 to try. Here is what is new in build 29613.1000: [Audio] Following up on our previous improvements, we’re making some more adjustments to Settings > System > Sounds based on your feedback. Namely, we’ve updated the “All sound devices” page so: You now have the ability to change default devices from this page. Each of the devices displayed on this page now has a little volume meter next to it to show if there is audio actively playing. We’ve adjusted the page design slightly so now you can filter whether you’re viewing input or output devices. We’ve added toggles so you can choose if you want to hide or show disabled, disconnected, and unplugged devices on this page. We’ve also updated the input and output audio properties page for devices in Settings to now include jack information for those that need it. And here is the changelog for build 28120.2315: This update includes a small number of minor bug fixes and improvements. [Accessibility] This update improves caption style responsiveness by redrawing captions immediately for caption style changes. If no current caption is visible, a sample caption string is displayed. [Audio] This update improves the reliability of the inbox HD Audio driver. You can find the official release notes for build 28120.2315 here and for build 29613.1000 here.
    • I agree with what I think you are saying, just not in the way you are saying it. Like any tool, the amount it represents your work is perorational to the effort you put into it. It is similar to why 2nd grade math students learning to add and subtract are not allowed to use calculators, but a high-school calculous student is. For the 2nd grader, that tool would completely replace the work they are doing, for the calculous student the same tool allows them to work far more effectively while in no way replacing their effort or knowable. If you spend 30 seconds writing a prompt, then the image that comes out is no more "yours" than if you found the same image with a Google Image search. However, many of these generative tools also support highly iterative processes that allow back and forth, and merging generated images with photos or human created images. I am sure you would agree that a human spending hours of time working on a project, even if AI was involved in the process, still reflects that human's work.
    • Windows 11 version 26H2 is now available for testing in the latest preview build by Taras Buria Friday Windows 11 preview builds are here. Insiders in the Experimental (formerly Dev) and Beta Channel can download builds 26300.8697 and 26220.8690. There are no new features, but Microsoft is officially moving the Experimental Channel to version 26H2. In addition, Microsoft is improving the copy dialog in File Explorer, the Start menu reliability, and fixing virtualization issues. Here is the changelog: [General] With today’s build, Windows Insiders in the Experimental channel will see the versioning updated under Settings > System > About (and winver) to version 26H2. For more information, see the Windows Insiders blog. [File Explorer] We’ve improved the visual consistency and reliability of the Copy dialog in Dark mode, including its launch experience and the expanded progress view. [Start menu] - Also available in Beta Improved reliability of Start menu reflecting newly installed or removed apps without requiring sign-out or restart. [Taskbar] Fixed an issue for Insiders using the new smaller taskbar option, where the system tray might get cut off or pushed off screen. [Settings] - Also available in Beta Improved reliability of Settings > Apps > Startup. [Virtualization] - Also available in Beta This update addresses an issue that could result in bugchecks citing HYPERVISOR_ERROR (0x20001) and KMODE_EXCEPTION_NOT_HANDLED (0x1E) errors after installing the latest flights on some devices during system restarts, virtual machine operations, or while running some gaming applications. You can find the official changelog for the Experimental build here and for the Beta build here.
    • I've always preferred this possibility. There is something that feels good about the idea that all matter in the universe will eventually come back together and maybe even result in another big bang. The idea that the universe would fizzle out over the eons and forever drift apart is a little depressing. I realize it is not logical to let a basic human desire for life to have a grand everlasting meaning change the way I feel about a scientific theory, but I am human, so that is how I feel :-).
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      577
    2. 2
      +Edouard
      190
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      76
    5. 5
      Steven P.
      73
  • Tell a friend

    Love Neowin? Tell a friend!