Verizon Doubts Cablevision's 101 Mbps Internet


Recommended Posts

Verizon poopoos Cablevision's hot new 101 Mbps DOCSIS 3.0 service

Cablevision wowed us all earlier this week when it announced that it would be offering a 101 Mbps cable internet service to its customers starting May 11 for $100 a month.

Even more impressive, perhaps, is word that its 101 Mbps would be uncapped ? particularly given how cable providers such as Time Warner Cable (and even smaller ISPs like Sunflower Broadband) are all about restrictions.

Verizon isn?t convinced by Cablevision?s claims of speed, however. Verizon?s PR man Eric Rabe wrote in the copolicy blog[/url] and post skeptical of Cablevision?s service promise.

?With today?s technology, you don?t have to break much of a sweat to deliver 100 Mbps to a few customers,? Rabe wrote. ?But given the inherent limits of the cable platform, a cluster of bandwidth junkies living near each other could be a real problem. One estimate is that a single 101 Mbps customer would use some 60% of the capacity in a neighborhood. Other users? Outta luck.?

?What happens when a customer with that speed hits the much slower Internet?? Rabe posed. ?So Cablevision is offering very high speed service to a very limited number of customers when there is little evidence of market demand for the speed. It is a parlor trick.?

Rabe goes on to say that a fiber optic is the future of networking ? which few will contest ? but also points out that many parts of the internet are still connected together at speeds slower than 100 Mbps, saying that is why customers aren?t demanding speeds in the 100 Mbps range today.

?For now, CVC?s leap to 101 Mbps is about market positioning and bragging rights rather than delivering a useful service to a mass customer market,? Rabe said.

In the end though, Rabe realizes that competition such as this is good for the consumer, as he adds, ?Competition is a key innovation driver, so in that sense FiOS along with CVC's product and the ultra-high-speed services of others, have the potential to spur the entire industry to breed new ideas at all levels?applications, content, information as well as transport.?

Source: Tom's Hardware

What I would have preferred to hear from Verizon is that they were rolling out that same 101 Mbps speed or better to compete! Sure the majority of customers won't use it and won't pay that much for it, but it would hopefully mean I could get 50+Mbps for a cheaper rate. Come on Verizon if FIOS can handle it then give it to us ;)

What I would have preferred to hear from Verizon is that they were rolling out that same 101 Mbps speed or better to compete! Sure the majority of customers won't use it and won't pay that much for it, but it would hopefully mean I could get 50+Mbps for a cheaper rate. Come on Verizon if FIOS can handle it then give it to us ;)

Well said.

I am a Verizon FIOS subscriber, and if they offered it and could deliver, not sure I would get it as I am pretty happy now, but if it was an option and cheap enough, I will definitely consider it.

I have cablevision. I have their 30/5 service. I get my 30/5 speeds pretty much all the time.

Verizon is just upset that cablevision beat them to the punch.

Heck I can run web and email servers on my service with those ports open (i have a control panel that lets me block and unblock the ports) . I also have free wifi in the whole tri-state area.

Verizon technically does not allow servers and ports not open. They dont offer the wifi either.

Yes it will be a shared node but I bet if you gave all 32 users 100/15 conenctions on their bpon nodes they would suffer slowdown also. Not all verizons nodes are gpon.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
    • Seems like Neowin has transitioned into being simps for the white house. I can't find a review for the last UFC games that came out.
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      142
    4. 4
      ATLien_0
      96
    5. 5
      Steven P.
      75
  • Tell a friend

    Love Neowin? Tell a friend!