Is it worth it for Vista users to upgrade to 7?


...  

222 members have voted

  1. 1. Will you upgrade to 7?

    • Yes
      178
    • No
      17
    • Not sure
      27
  2. 2. What's your experience with Vista?

    • Great
      132
    • Average
      66
    • Terrible
      19
    • Not sure
      5


Recommended Posts

Vista seems really sluggish to me, XP just seemed faster. I will upgrade to 7, I just hope people who upgrade from Vista get a discount or something.

That's unfair because the only people I know of who had problems with Windows Vista was those people whose hardware wasn't up to scratch or wasn't even average.

Been using Windows Vista 32-bit SP1 and testing Windows 7 RC x64. While 7 is faster and does offer several compelling new features, I did run into reliability problems. Things are great while it lasts, but sometimes start behaving wildly - sound stops working (and when this happens, trying to play any media in WMP hangs it), window thumbnails stop popping up reliably, problems with ClickOnce deployed applications, WinForms (at least some controls) are slower than in Vista and others. Add to that with some backwards steps including removal of tag editor and navigation of videos by artists in WMP12. Most of these problems I would attribute to lack of maturity in driver and application ecosystem around Windows 7.

That I don't have any issues with Windows Vista SP1, I can wait a few months longer before I move to Windows 7 as my primary OS. Hopefully, that extra time will be enough to roll out a few reliability updates across the drivers, applications and the core OS itself to smooth out the initial turbulence.

Will I upgrade to 7 from Vista? Already have.

Using the RC on three "production" machines and my experience has been nearly flawless. Two of those machines are running demonstrably better than they were on Vista RC1 (the third was recently built and never had Vista--I suspect that what few issues I've had on that machine with Win7 wouldn't have been far off from what Vista would have done).

Windows 7 presents a compelling upgrade proposition for a few reasons. Calum's post nicely describes the UI enhancement of the SuperBar, and I second his sentiments. It is a nice improvement and helps make Aero Glass a genuine functional step up from Aero Basic. I would agree, though, that the SuperBar isn't a good reason to upgrade on its own.

First, I expect Windows 7 to be the first client where 64-bit will be in the majority. I don't know how it's breaking out with the downloads, but I think it's a safe bet that Microsoft and OEMs have agreed to limit the number of new machines with the 32-bit version. As 64-bit support spreads, a majority of Vista users will feel some pressure to upgrade, if only for the additional RAM support. While they could upgrade to Vista x64, my guess is most of those users will just go to Win7. The vast majority of systems built in the past three years will support x64, and I know I deliberately built and bought 64-bit-compatible systems just to keep them (relatively) future-proof.

Gamers on Vista (and there many more now than there were even a year ago) will upgrade because of the new memory model for graphics that no longer maintains a duplicate of the drawn windows in RAM. This is the reason why Vista grinds to a halt with too many windows open, and Win7 dispenses with it. Of course, gamers are pathological upgraders anyway...

Hardcore geeks and power users will like the new XP Mode. The integration features in the latest beta for VirtualPC are fantastic, and point the way to a new way to maintain legacy compatibility.

I liked Vista. It represented a significant shift in Windows archetecture with new subsystems like Windows Presentation Foundation and Windows Communication Foundation. The only real problem with Vista was the way it conflicted with legacy hardware and software. In the past two years much more of the "ecosystem" has come to depend on WPF and WCF, and less dependent on legacy technology. Win7 is pretty much perfectly compatible with Vista on these counts.

I'm sure if I tried Windows 7, I would have gone with a solid "Yes", but I haven't tried it yet and I'm not as excited over it as some of you are, so as it stands, "Not sure" is my answer.

I got Vista last year and didn't see what all the fuss was about. I guess all the kinks were rolled out of Vista by then? It works very well for me... aside from the forgetful folders that can't remember my view settings.

I've been using both Vista 64 sp1 (Legal) and Win7 64 RC (dual boot) for graphics/video apps.

On my main rig (E6750/8gb), any performance differences are slight at best. Definitely,

DOES NOT justify paying for the upgrade (Vista to Win7).

However, clean installs of Win7 RC on my older 2gb WinXP machines resulted in noticeable performance increases.

To answer the threads question ... "Is it worth it for VISTA users to upgrade to 7" ....

the answer for me is no.

Obviously, your poll results will be skewed considerably by the non-paying warez crowd.

Maybe I'll upgrade to 7, my main issue isn't really Windows its the eco system surrounding it. NVIDIA drivers for example have never really been pro quality for me in Vista and nothing has changed with 7. I'm not ready to pay up for Windows 7 if NVIDIA can't even get their drivers sorted out.

It is so much worth upgrading Vista to Seven, there UI is generally the same besides some noticeable tweaks and improvements. The performance is amazingly faster, you can run Seven on a net-book without a problem, not so much with Vista.

Try to dual boot the operating system and see what you like best - yet keep what you had before Windows Seven.

I would upgrate if it was FREE, i won't pay for another windows again, i'm fine with vista sp1 and sp2 will be great.

It is free for just about a year, then Windows will turn your computer off every 2 or so hours until it annoys the living hell out of you - therefore forcing you to buy the official release disk.

Download Windows 7 from the Microsoft Download Page and then burn the disk to a DVD or boot from a Flash Drive if you know how. Try it out, you'll like it and it's completely free.

I'm going to wait until they reveal the prices. I want to upgrade but actually upgrading will depend on the cost of Windows 7. I'm currently running Windows Vista Ultimate and, as you may already know, it wasn't cheap. Also, DirectX 11 support was a big reason for me to upgrade but I found out that it's going to be available for Windows Vista as well. Aside from the various performance improvements, UI tweaks, and superbar, I really don't see any other reason to upgrade.

Windows 7 is a hands down winner compared to Vista. There's no way I would think otherwise about it now.

After dealing with a Vista laptop tonight for 4 hours (just finished) - Yeah. Bring on Win7 already!

(In comparison, I also worked on an XP computer tonight, it was done 2 hours ago.)

I love having XP around, but with Win7 having XP-M in it, I get the best of both worlds now. (Y)

*facepalm* Just because you can't use Vista properly (if Vista is really the problem for that computer, taking 4 hours to fix it is downright laughable) doesn't mean it's a bad OS. It's still far and away better of an overall OS than XP ever was. I wonder if XP mode will also introduce XP's inherent failings at malware resilience to Windows 7. Hardly something many people would want, given XP can be credited (or blamed) for introducing most of the worst malware the world has ever seen to the consumer market.

That said, as soon as this resolution glitch I have with 7 is resolved, I'll upgrade to it.

It is so much worth upgrading Vista to Seven, there UI is generally the same besides some noticeable tweaks and improvements. The performance is amazingly faster, you can run Seven on a net-book without a problem, not so much with Vista.

The performance is "amazingly faster" on lower-end hardware. I have a decent machine and the pure performance difference between Vista SP2 and 7 RC on it is negligible. In fact, my hardware seems to get throttled by Windows 7. Every fan within the case goes nuts.

I've had no problems with Vista at all. There are those rare times though, when it just seems to hang before it does something but like I previously said, Vista has been primo for me. Given that, I'm a sucker for a new OS and Windows 7 is the latest and therefore better. I'll be trying to get my hands on it.

For Vista users, there is definitely NO need to upgrade. Vista performs great and the real new features of Win7 (DirectAccess, Brachcache, Bitlocker2Go) are not available to the Home Editions of Win7 and require a Windows Server 2008 R2 server to work.

If you are a XP user throw the XP disks away and move to NT6.x in the form of Win7, Vista users could stay with Vista :)

i am going to simply because its the newest OS

i tried the beta and didnt find it much faster than my vista sp2, but i didnt use it much and didnt have much stuff installed on it

I have to agree that 7 on a dual core and 2 gigs or more of RAM will see little to no performance increase. For me the upgrade is worth it simply because of all the polish and nice touches all over the place. When using Vista now, I almost feel about it the way I did XP when using it after Vista. It just seems dated and a little ugly to look at. The cleaner look, improved start menu search results, Aero Peek, the ability to size a window to half the screen with gesture instead of jumping through hoops and the improvements in Explorer are big factors in my decision to switch at RTM.

Then again, I haven't purchased the OS for my new system and am using the RC in the mean time to get me by so i don't have to purchase Windows twice.

Edited by soonerproud
Vista SP1 is pretty high on performance. Vista is patched and performs. So why would I move to Windows 7?

I wouldn?t. Windows 7 just does not offer enough new features or any compelling reason for me to spend a hefty sum on an upgrade.

is this a serious question? YES move to 7 but don't EVER upgrade, do a fresh clean install.

Any reason why? Or are you still caught up in the Windows-7-UAC-is-unsafe nonsense?

It is not like it is hard to turn the slider up if he/she is worried about the default UAC setting. That is the first thing I do after initial installation of programs, drivers and changing the Windows setting to my taste on a new install.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      226
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!