Recommended Posts

Yes the good o'l Powershot G3. Just got it a couple of weeks ago. I have been using it a lot.

curious if you use manual modes or just auto? for the closeup shots i imagine you put it into macro mode? do you use a tripod? etc etc

wouldn't mind knowing how you go about taking such nice shots. I know your camera is expensive so I'm sure that helps, but what settings are you using?

also, are you taking the largest sized pics on fine or superfine?

just would like to know a little more detail is all. I have the a70 so our featureset should be close enough that we can talk in canon lingo :)

Ok well I used my tripod for all of the flower shots. The only macro shots were the very close up of the flower, and the bug. Everything else was either zoomed in or just shot right from the lense (no zooming). I didn't use the digital zoom either because the quality is crap with digital zoom. I only used the auto mode to tell me what the focal length was usually f/x, however in this case it was f/4. Then I would go to the Av mode and set my aperature. Then I would go to M mode and set my shutter speed with my desired aperature setting that I chose using Av mode. I would take about 3-5 shots with the same aperature, in M mode, with 3-4 different shutter speeds, which varies the lighting. The faster the shutter moves the less amount of light you'll get in your shot. So I usually fool around with that. When I get between 1-4 inches from my subject I'll turn on macro mode, which will blur the background, but will keep the subject crisp, like in that bug photo. However, on that shot I didn't use my tripod because I was afraid it was going to move (mom was holding tripod for me, and she was far away from me), and so I just tried it by hand. I am still learning about aperature and shutter speed, so please forgive me if my information isn't correct.

Edit: Yes my pictures are taken in Superfine mode (2272x1702), with the max level of sharpness set.

The reason why I also use higher shutter speeds where there are many landscape areas is because I don't want to over expose the sky. The sky is much much brighter than the subject so to let less light in I increase the shutter speed, thus you can see the nice blue sky with detailed clouds, and still the subject is visable.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Neowin shudders at the many, many posts from users that block their ads
    • I'm from Australia. This posts reeks of a Nigerian scammer.
    • It's funny that iPhone users think they are getting feature, where in fact they are getting cosmetics that just do iteration circles of "improvement" of the said cosmetics. Apple just doesn't know what to do with this product anymore. There is no innovation on this areas anymore.
    • You can disable the bloat on every browser. That's not the point. I will never use a browser of a shady company. I don't trust them at all. I can still find adblocking solutions than having to rely on a browser from a shady company. Every year they try something shady lol 2016: Brave Ad Replacement https://archive.is/W0k4j#selection-203.7-203.28 2016: pay-to-win Wikipedia clone into the default search engine list https://github.com/brave/browser-laptop/issues/5475 2018: Tom Scott and other creators noticed Brave was soliciting donations in their names without their knowledge or consent. https://www.reddit.com/r/brave...aims_that_brave_is_falsely/ 2020: Brave got caught injecting URLs with affiliate codes https://www.theverge.com/2020/...-crypto-privacy-ceo-apology 2021: Brave's TOR window was found leaking DNS queries https://www.zdnet.com/article/...n-addresses-in-dns-traffic/ 2022: Brave floated the idea of further discouraging users from disabling sponsored messages. https://github.com/brave/brave-browser/issues/22066 2023: Brave got caught installing a paid VPN service on users' computers without their consent. https://www.xda-developers.com...owser-installs-vpn-windows/ 2023: Brave got caught scraping and reselling people's data with their custom web crawler, which was designed specifically not to announce itself to website owners. https://stackdiary.com/brave-s...ghted-data-for-ai-training/ 2024: Brave gave up on providing advanced fingerprint protection, citing flawed statistics https://www.bleepingcomputer.c...tion-as-it-breaks-websites/ 2025: Brave staff publish an article endorsing PrivacyTests and say they "work with legitimate testing sites" like them. This article fails to disclose PrivacyTests is run by a Brave Senior Architect! https://brave.com/blog/adblock...esting-websites-harm-users/
    • Alpine Linux 3.24 released with support for COSMIC Desktop and other improvements by David Uzondu Alpine Linux 3.24 has been released with updated system packages, including Linux kernel 6.18 and Rust 1.96. The team also added IPv6 support to the system installer, and they introduced automatic serial console configuration for headless setups. System76's COSMIC desktop environment is now available in the community repo. System76 originally started building this DE because its developers found GNOME to be pretty limited. Plus, it did not help that with virtually every GNOME update, the changes broke System76's custom desktop extensions. As for system packages, the Alpine team moved GTK+ 3.0 from the main repository to the community repository due to its legacy status. py3-setuptools has been upgraded to version 82.0.0, while the old pkg_resources module has been completely dropped. The team also removed outdated packages that still relied on py3-six and GTK+ 2.0. In addition to that, libsoup 2 has been removed because the library was affected by multiple security vulnerabilities. If you're a GRUB user, the Alpine Team said that you must manually run the grub-install command with your specific device or EFI options right after upgrading your system, otherwise, your computer may fail to boot properly with the newly updated GRUB 2.14 bootloader. New installations of Alpine Linux now offer an optional path to a /usr-merged directory layout if you set the BOOTSTRAP_USR_MERGED environment variable to 1 before you execute the setup-disk command. If you already run an older installation, you can migrate manually by installing the merge-usr package and executing its binary as the root user. The team recommends this layout to align Alpine with modern Linux standards, though you should verify your custom scripts before making the switch. Alpine Linux is a pretty tiny (~5MB) Linux distro built around musl libc, BusyBox, and OpenRC. It's been around since 2005, comes with its own package manager called Alpine Package Keeper (APK), and is widely used in modern cloud computing and software deployment.
  • Recent Achievements

    • One Year In
      Primer1st earned a badge
      One Year In
    • Experienced
      JayZJay went up a rank
      Experienced
    • Reacting Well
      Sir_Timbit earned a badge
      Reacting Well
    • Week One Done
      rubentuben8 earned a badge
      Week One Done
    • Week One Done
      ARaclen earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      511
    2. 2
      PsYcHoKiLLa
      229
    3. 3
      Edouard
      134
    4. 4
      ATLien_0
      87
    5. 5
      Steven P.
      80
  • Tell a friend

    Love Neowin? Tell a friend!