Recommended Posts

Very often chkdsk.exe launches to check system partition even though it had shut down cleanly, by using Shut down opton in the Start menu.

I'm running Windows 7 RC X64; I can't remember if it happened with other builds.

Roughly, every second startup is affected with this issue.

This is my last and before last log:

Checking file system on C:
The type of the file system is NTFS.
Volume label is WINDOWS 7.


One of your disks needs to be checked for consistency. You
may cancel the disk check, but it is strongly recommended
that you continue.
Windows will now check the disk.						 

CHKDSK is verifying files (stage 1 of 3)...
  86272 file records processed.										  File verification completed.
  40 large file records processed.									  0 bad file records processed.										2 EA records processed.											  44 reparse records processed.									   CHKDSK is verifying indexes (stage 2 of 3)...
  117762 index entries processed.										 Index verification completed.
  0 unindexed files scanned.										   0 unindexed files recovered.									   CHKDSK is verifying security descriptors (stage 3 of 3)...
  86272 file SDs/SIDs processed.										 Cleaning up 21 unused index entries from index $SII of file 0x9.
Cleaning up 21 unused index entries from index $SDH of file 0x9.
Cleaning up 21 unused security descriptors.
Security descriptor verification completed.
  15746 data files processed.											CHKDSK is verifying Usn Journal...
  37076576 USN bytes processed.											 Usn Journal verification completed.
Windows has checked the file system and found no problems.

  62918572 KB total disk space.
  20513080 KB in 67280 files.
	 44800 KB in 15747 indexes.
		 0 KB in bad sectors.
	190968 KB in use by the system.
	 65536 KB occupied by the log file.
  42169724 KB available on disk.

	  4096 bytes in each allocation unit.
  15729643 total allocation units on disk.
  10542431 allocation units available on disk.

Internal Info:
00 51 01 00 5e 44 01 00 c2 61 02 00 00 00 00 00  .Q..^D...a......
a5 01 00 00 2c 00 00 00 00 00 00 00 00 00 00 00  ....,...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

Windows has finished checking your disk.
Please wait while your computer restarts.

Checking file system on C:
The type of the file system is NTFS.
Volume label is WINDOWS 7.


One of your disks needs to be checked for consistency. You
may cancel the disk check, but it is strongly recommended
that you continue.
Windows will now check the disk.						 

CHKDSK is verifying files (stage 1 of 3)...
  84224 file records processed.										  File verification completed.
  42 large file records processed.									  0 bad file records processed.										2 EA records processed.											  44 reparse records processed.									   CHKDSK is verifying indexes (stage 2 of 3)...
  115456 index entries processed.										 Index verification completed.
  0 unindexed files scanned.										   0 unindexed files recovered.									   CHKDSK is verifying security descriptors (stage 3 of 3)...
  84224 file SDs/SIDs processed.										 Cleaning up 11 unused index entries from index $SII of file 0x9.
Cleaning up 11 unused index entries from index $SDH of file 0x9.
Cleaning up 11 unused security descriptors.
Security descriptor verification completed.
  15617 data files processed.											CHKDSK is verifying Usn Journal...
  35427904 USN bytes processed.											 Usn Journal verification completed.
Windows has checked the file system and found no problems.

  62918572 KB total disk space.
  19968572 KB in 68253 files.
	 43852 KB in 15618 indexes.
		 0 KB in bad sectors.
	187116 KB in use by the system.
	 65536 KB occupied by the log file.
  42719032 KB available on disk.

	  4096 bytes in each allocation unit.
  15729643 total allocation units on disk.
  10679758 allocation units available on disk.

Internal Info:
00 49 01 00 aa 47 01 00 63 6a 02 00 00 00 00 00  .I...G..cj......
99 01 00 00 2c 00 00 00 00 00 00 00 00 00 00 00  ....,...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

Windows has finished checking your disk.
Please wait while your computer restarts.

And HD Tune log:

HD Tune: WDC WD1600BEVT-60ZCT0 Health

ID							   Current  Worst	ThresholdData	 Status   
(01) Raw Read Error Rate		 200	  200	  51	   0		Ok	   
(03) Spin Up Time				159	  159	  21	   1016	 Ok	   
(04) Start/Stop Count			99	   99	   0		1274	 Ok	   
(05) Reallocated Sector Count	200	  200	  140	  0		Ok	   
(07) Seek Error Rate			 100	  253	  51	   0		Ok	   
(09) Power On Hours Count		95	   95	   0		3824	 Ok	   
(0A) Spin Retry Count			100	  100	  51	   0		Ok	   
(0B) Calibration Retry Count	 100	  100	  0		0		Ok	   
(0C) Power Cycle Count		   100	  100	  0		895	  Ok	   
(BB) (unknown attribute)		 100	  100	  0		0		Ok	   
(BC) (unknown attribute)		 100	  100	  0		0		Ok	   
(BE) Airflow Temperature		 57	   44	   40	   43	   Ok	   
(C0) Power Off Retract Count	 200	  200	  0		425	  Ok	   
(C1) Load Cycle Count			180	  180	  0		60662	Ok	   
(C2) Temperature				 100	  87	   0		43	   Ok	   
(C4) Reallocated Event Count	 200	  200	  0		0		Ok	   
(C5) Current Pending Sector	  200	  200	  0		0		Ok	   
(C6) Offline Uncorrectable	   100	  253	  0		0		Ok	   
(C7) Ultra DMA CRC Error Count   200	  200	  0		0		Ok	   
(C8) Write Error Rate			100	  253	  51	   0		Ok	   

Power On Time		 : 3824
Health Status		 : Ok

My machine:

HP 6820s

WDD 160 GB

DDR2 2GB

ATI Mobility Radeon X1350

Intel pentium Dual Core T2390

I have installed all latest drivers offered from WU.

I've tried running chkdsk from Win 7 install disk (from Command Prompt) on all partitions (with /f parameter) but apparently it didn't help.

Any ideas?

Thanks!

Link to comment
https://www.neowin.net/forum/topic/785904-win-7-chkdsk/
Share on other sites

I would suggest you back up any user data on that hard drive, as it may be faulty

Once your data is fully backed up, you should then locate the hard drive manufacture diagnostic utility (usually these are used in warranty scenarios, so that's the area you should find the tool on the manuafacturers support page)

Link to comment
https://www.neowin.net/forum/topic/785904-win-7-chkdsk/#findComment-591152116
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I'm not aware of this issue, but to help the other guys.  What version of Android are you using? Did you try a different browser? To see if Edge is the issue here.
    • I agree when are you going to read this (really poor BTW) article? Here is a better article so you actually know what is going on and answers questions you had in other comments --> https://arstechnica.com/gadgets/2026/05/speed-boosting-low-latency-profile-is-one-of-the-improvements-coming-to-windows-11/ It is unclear if one will be able to disable the new profile at this point but I am not seeing any reason why one would.
    • I disagree; they come off very "bitchy" and "whiny". Make a great product and combine that with a great price (free) and people will come over to your side. Or build it and they will come as they say. Constantly trying to get attention by complaining all the time, will turn people off to your product.
    • It use to be a nightmare, with LibreOffice supporting a newer draft ODF standard by default, and Microsoft Office supporting the older non-draft standard. Now that they both support the same version of ODF, they should be interoperable.
    • Brave Browser 1.91.171 by Razvan Serea Brave Browser is a lightning-fast, secure web browser that stands out from the competition with its focus on privacy, security, and speed. With features like HTTPS Everywhere and built-in tracker blocking, Brave keeps your online activities safe from prying eyes. Brave is one of the safest browsers on the market today. It blocks third-party data storage. It protects from browser fingerprinting. And it does all this by default. Speed - Brave is built on Chromium, the same technology that powers Google Chrome, and is optimized for speed, providing a fast and responsive browsing experience. Brave Browser also features Brave Rewards, a system that rewards users with Basic Attention Tokens (BAT) for viewing opt-in ads. This innovative system provides an alternative revenue model for content creators and a way to support the Brave community. SlimBrave Neo takes all the good things about Brave and makes them even better by keeping everything clean, light, and privacy-focused. It removes the extra clutter, turns off features you might not need, and cuts down on anything that could slow you down or collect unnecessary data. Because it relies on simple settings and policies instead of modifying the browser itself, you still get full Brave compatibility—just in a smoother, lighter, and more privacy-friendly package. Brave Browser 1.91.171 changelog: General Fixed Cardano not being disabled on upgrade to Brave Origin. Upgraded Chromium to 149.0.7827.103. Origin Removed “Survey Panelist” setting from brave://settings/privacy. Fixed P3A and usage ping under brave://settings/privacy being displayed on first launch on Linux. Upgraded Chromium to 149.0.7827.103. Download: Brave Browser 64-bit | 1.2 MB (Freeware) Download: Brave Browser 32-bit View: Brave Homepage | Offline Installers | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
    • One Year In
      slackerzz earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      PsYcHoKiLLa
      189
    3. 3
      +Edouard
      156
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!