Windows 7 flashy startup animation increases your boot


Recommended Posts

Something about that Windows 7 start-up animation that bugs me. I have this feeling that the startup process will not go any farther until that flashy little thing swirls around the screen and comes together. With XP and vista if you had a fast ssd the loading bar would be there for a few seconds and then blink its gone. I feel that with Windows 7 you have to wait for that animation to appear.

Then master2k27 recommended turning off the GUI boot. So I did.

the result?

From the moment I press enter on "normal startup, until I get a cursor on the black screen"

SSD Laptop

With the GUI turned on 20.56 seconds

With the GUI turned off 16.53 seconds.

i7 920

With GUI - 41.81 seconds

Without GUI 34.47 seconds.

Try it for yourself.

To turn off the GUI boot go into Msconfig and click on the boot tab. Then check "No GUI boot". Though I prefer you time your startup time first before you turn it off so you have something to compare it to.

The method I used to time both boot times is this.

I first get the advanced startup menu up by pressing f8. I then select boot normally. I then put one finger on my watch and another on the enter key and press then both at the same time.

Edited by warwagon
there is an option in windows for non GUI boot. forgot where :p

Wonder if it helps, and ya I know what you are referring too. I think its under msconfig. I should try it and time the boots.

Yeah, you can do a non-gui boot through msconfig (on the startup tab). The only problem with this (which hesitates me from doing it) is you will not see any error screens either if it hangs/pauses. But then again, I've never had any problems period so... I suppose I should do it too!

Yeah I've thought that too. My hard drive isn't consistently doing anything until the animation starts, so I'm wondering if they could save a bit of time in there somewhere.

Edit: Interesting, I timed both disabled and enabled GUI-boot options, and the non-GUI boot was about 2 seconds faster.

Edited by Raikou Tch
Something about that Windows 7 start-up animation that bugs me. I have this feeling that the startup process will not go any farther until that flashy little thing swirls around the screen and comes together. With XP and vista if you had a fast ssd the loading bar would be there for a few seconds and then blink its gone. I feel that with Windows 7 you have to wait for that animation to appear.

You should read the Windows 7 blog about that animation; they actually changed its function and from where it runs in order to make sure there was no hesitation in it, but I doubt very very seriously that it slows the actual start up down. I've deleted the RSS feed from my bookmarks, but I'm sure if you do a Google search for Engineering Windows 7 you'll find it. It was pretty interesting. But I don't think it slows anything down. Remember in Vista, you had the loading bar, but then after that you had the glowing orb before the logon screen? There's no more orb in 7, it's straight to the logon screen from the 'Starting Windows' page. I would time it and see if there is a difference in boot times without it.

Wonder if it helps, and ya I know what you are referring too. I think its under msconfig. I should try it and time the boots.

Ok I just tested it.

On my SSD Laptop.

From the moment I press enter on "normal startup, until I get a cursor on the black screen"

With the GUI turned on 20.56 seconds

With the GUI turned off 16.53 seconds.

Now i'm going to test it on my i7 920 ... brb

There's a chance that it could be the BIOS fault for the hanging times before the animation starts up. However, the Windows animation is always there for the same amount of time on all the computers in my house and it's the blank screen's time that varies.

I've deleted the RSS feed from my bookmarks, but I'm sure if you do a Google search for Engineering Windows 7 you'll find it.

Here they are...

http://blogs.msdn.com/e7/archive/2008/08/2...erformance.aspx

http://blogs.msdn.com/e7/archive/2009/02/1...-animation.aspx

There's a chance that it could be the BIOS fault for the hanging times before the animation starts up. However, the Windows animation is always there for the same amount of time on all the computers in my house and it's the blank screen's time that varies.

No, I don't think he means the entire bootscreen is lagging... It starts by saying "Starting Windows" and then 5 seconds later or whatever, it does that animation. It's a "feature" :-P

But wow, the bootscreen cut 4 seconds off. Nice. I should try this...

No, I don't think he means the entire bootscreen is lagging... It starts by saying "Starting Windows" and then 5 seconds later or whatever, it does that animation. It's a "feature" :-P

But wow, the bootscreen cut 4 seconds off. Nice. I should try this...

Oh no, I got that hahaha. :p

I didn't mean to convey that it was actually "hanging". I was just referring to the black screen that said "Starting Windows". I was trying to figure out if Windows was actually loading any files during the "empty" screen.

I guess I forgot what the boot screen looked like cause I forgot that text was there before the logo showed up.

OK the results on my i7 920 computer. From the time I press enter on boot normally until I see a white cursor

With GUI - 41.81 seconds

Without GUI 34.47 seconds.

I want other people in this thread to also try this and post your results.

OK the results on my i7 920 computer. From the time I press enter on boot normally until I see a white cursor

With GUI - 41.81 seconds

Without GUI 34.47 seconds.

I want other people in this thread to also try this and post your results.

wow.... okay, that inspires me to try it now.

wow that is a big diffrance.

why do we even need to see the logo its at the bottom right of my desktop

?

OK the results on my i7 920 computer. From the time I press enter on boot normally until I see a white cursor

With GUI - 41.81 seconds

Without GUI 34.47 seconds.

I want other people in this thread to also try this and post your results.

Interesting... how are you measuring the start-up time?

Interesting... how are you measuring the start-up time?

I first get the advanced startup menu up by pressing f8. I then select boot normally. I then put one finger on my watch and another on the enter key and press then both at the same time.

Time till white cursor at welcome screen (from the power button on a dell laptop):

with gui - 23 seconds

without gui (try #1) - 29 seconds

without guy (try #2) - 20 seconds

um.... lol. well, in conclusion, my computer isn't very consistent. perhaps it was getting used to the change the first try? either way, i think i can wait 3 extra seconds to see the animation. it's worth it :p

I first get the advanced startup menu up by pressing f8. I then select boot normally. I then put one finger on my watch and another on the enter key and press then both at the same time.

Have you tried any tests with windows sounds? I'm sure with boot and login sounds disabled it's quicker. Maybe it's placebo though. I don't want to reboot to test it though :p

Time till white cursor at welcome screen (from the power button on a dell laptop):

with gui - 23 seconds

without gui (try #1) - 29 seconds

without guy (try #2) - 20 seconds

um.... lol. well, in conclusion, my computer isn't very consistent. perhaps it was getting used to the change the first try? either way, i think i can wait 3 extra seconds to see the animation. it's worth it :p

Upon my 2nd reboot test on my i7 the no gui was even faster yet. :D

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Zed 1.7.2 has landed with updated OpenCode models, bug fixes and other improvements by David Uzondu Zed 1.7.2 recently landed on the stable release channel, bringing a host of AI-related features including automatic context compaction and settings-based skill management, along with other things like better Markdown preview rendering and custom git commands in the graph view. Starting with the AI stuff, the developers introduced "/compact", a command that basically summarizes your conversation history on demand. This tool prevents your active chat window from hitting token limits by compressing older parts of the dialogue into a brief overview. In addition to that, the team relocated skill management to the settings UI, improving how the application communicates errors regarding those skills, and updated the OpenCode model roster to support DeepSeek V4 Flash, MiniMax M3, Qwen 3.7 Plus, and Nemotron 3 Ultra Free. External agent users can also monitor context window cost metrics and delete individual sessions directly from their history. Right-clicking ref labels in the git graph now opens a context menu that runs different actions against selected targets, kind of how VS Code does it. Here are some of the bug fixes this new release brings: The active agent fails to auto-select when creating a new git worktree. A scrollbar unexpectedly appears on wrapped code blocks in the agent chat. Collapse indicators for project headers appear when performing sidebar searches. Bracketed ellipsis title prefixes fail to show the ellipsis icon properly. Project icons render incorrectly in the recent projects picker. Diff hunk controls appear inside non-editable commit view multibuffers. The software update button hangs indefinitely on the downloading stage. Restoring an agent terminal in a remote project triggers a sudden crash. Splitting a pane that contains an active commit view causes a crash. Linux Wayland freezes when trying to read the clipboard from laggy external apps. Zed is a "newish" code editor trying to break the massive stronghold VS Code has on the developer community. Funny enough, the editor was created by former GitHub employees who worked on the Atom text editor (which Microsoft killed in 2022, several years after it bought GitHub). The project officially hit version 1.0 back in April, introducing platform parity for Windows and Linux alongside deep support for DeepSeek-V4-Pro.
    • 26H2 absolutely will support ARM Windows just not on devices that came with 26H1. This is evident by the fact I am running 26H2, which on my MacBook Neo and Surface Pro 12 (inch), within a VM.
    • Mp3tag 3.35 by Razvan Serea Mp3tag is a powerful and yet easy-to-use tool to edit metadata (ID3, Vorbis Comments and APE) of common audio formats. It can rename files based on the tag information, replace characters or words from tags and filenames, import/export tag information, create playlists and more. The program supports online freedb database lookups for selected files, allowing you to automatically gather proper tag information for select files or CDs. Mp3tag supports the following audio formats: Advanced Audio Coding (aac) Free Lossless Audio Codec (flac) Monkeys Audio (ape) Mpeg Layer 3 (mp3) MPEG-4 (mp4 / m4a / m4b / iTunes compatible) Musepack (mpc) Ogg Vorbis (ogg) OptimFROG (ofr) OptimFROG DualStream (ofs) Speex (spx) Toms Audio Kompressor (tak) True Audio (tta) Windows Media Audio (wma) WavPack (wv) Mp3tag 3.35 changelog: This version introduces a new Files options page, enhanced toolbar customization, support for RF64 WAV files, improved Discogs and MusicBrainz tag sources, and many other improvements and fixes. See the Release Notes for more details. Download: Mp3tag 64-bit | 5.7 MB (Freeware) Download: Mp3tag 32-bit | 5.2 MB Link: Mp3tag Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • The FIFA World Cup is not US centric.
    • It’s amusing how Microsoft is pushing IT admins as if this was a major, game-changing update. In reality, it’s just an enablement package that bumps the build number, which is disappointing compared to the more substantial 22H2 and 24H2 releases. Technically, 25H2, 26H1, and the upcoming 26H2 are essentially the same, differing only in support schedules. They could have included the Windows K2 improvements here, but chose not to. The era of Windows being in the backburner continues, and this 26H2 release feels like an afterthought. Shame, Nadella, shame.
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      78
    4. 4
      Steven P.
      72
    5. 5
      Michael Scrip
      71
  • Tell a friend

    Love Neowin? Tell a friend!