Battlefield: Bad Company 2

By Sethos
in Gamers' Hangout

 Share

Recommended Posts

Grand Master

DirtyLarry Veteran

Posted
  • Veteran
Posted

I checked out Hastings last night on the PC version, literally just played one single full round, and it seemed really bad. Base spawn camping was rampant in the first half of the round. Luckily there were some tanks so a quick message to my squad saying all I need is an engineer and I was able to get a whole lot of kills and stop the base spawn camping and actually then play the rest of the round the way it was supposed to be (I always play Conquest), so it seemed like it had some potential, but literally the round just started off with a good 10 minute fight for the team I was on to just get out of our base. it turned really ugly really fast. Hope maybe that was just some one off experience, but not counting on it at all.

Grand Master

ViperAFK

Posted
Posted

Looks like DICE released Operation Hastings for the Xbox 360 and PS3 in an "act of compassion". :)

:rofl:

I checked out Hastings last night on the PC version, literally just played one single full round, and it seemed really bad. Base spawn camping was rampant in the first half of the round. Luckily there were some tanks so a quick message to my squad saying all I need is an engineer and I was able to get a whole lot of kills and stop the base spawn camping and actually then play the rest of the round the way it was supposed to be (I always play Conquest), so it seemed like it had some potential, but literally the round just started off with a good 10 minute fight for the team I was on to just get out of our base. it turned really ugly really fast. Hope maybe that was just some one off experience, but not counting on it at all.

I've probably had this experience on every single bc2 map. Bad teams are bad :pinch:

Grand Master

ObiWanToby

Posted
Posted

Bad teams do suck. They should return the game to the original functionality, where when you'd join you'd be grouped with your friends. I can't stand having a crappy team. It just becomes unfun when you run out of ammo, get revived in front of an enemy tank, and you are the only one arming and disarming.

Veteran

Setnom

Posted
Posted

Looks like DICE released Operation Hastings for the Xbox 360 and PS3 in an "act of compassion". :)

So let me get this straight: pc gamers have to earn the map, console players receive it as a gift! WTF?? They should have gotten it at 69 million, like intended!

Grand Master

Yusuf M. Veteran

Posted
  • Veteran
Posted

So let me get this straight: pc gamers have to earn the map, console players receive it as a gift! WTF?? They should have gotten it at 69 million, like intended!

It was a community challenge where PC players came out on top. Instead of waiting for X360/PS3 players to reach 69m team actions, DICE decided to unlock the map for them in what I'd call a gesture of compassion. I play the PC version of Bad Company 2 and Vietnam exclusively and this doesn't bother me one bit at all - and it shouldn't bother you too.

Grand Master

MightyJordan

Posted
Posted

I'm not certain. I think you should be able to because it just gives you a key that you add in game.

Great, that's all I needed to know, thanks. :) Pheee told me the same thing earlier, but I just wanted to double-check it on here first before I went off and bought it. :p I got a 20% off code for the EA Store, so I can get it for ?8. :)

Grand Master

MightyJordan

Posted
Posted

Doesn't work

Eh? Are you sure? trag3dy and Pheee both said you just get a code that you enter in-game in BC2, regardless of what version you own, and Pheee says it's the same game on both EADM and Steam, buying the Vietnam expansion only gives you a code to enable the DLC in-game, and that there isn't a separate download.

Grand Master

trag3dy

Posted
Posted

Eh? Are you sure? trag3dy and Pheee both said you just get a code that you enter in-game in BC2, regardless of what version you own, and Pheee says it's the same game on both EADM and Steam, buying the Vietnam expansion only gives you a code to enable the DLC in-game, and that there isn't a separate download.

This is from Michael Kalms on the Steam forum, consider it your definitive answer because well.. it is (it works btw):

Edit: Updated with info regarding gifted Vietnam

There seems to be some confusion regarding purchasing Vietnam. I hope this clears things up.

Any stores that "sell BC2 Vietnam", sell a 16-digit code. This code can be entered into the BC2 game client - any version of the game client. Entering this code unlocks Vietnam for that EA account. No additional download is necessary.

Here are some typical scenarios:

You have bought the base game on Steam, and Vietnam on Steam - this works. You will see Vietnam listed in your Steam client.

You have bought the base game on Steam, and someone gifts you Vietnam on Steam - this works. You will see Vietnam listed in your Steam client.

You have bought the base game on Steam, and Vietnam somewhere else - this works. The Vietnam expansion will not be visible in the Steam client, but you can access it in-game.

You have bought the base game somewhere else, and Vietnam somewhere else - this works.

You have bought the base game somewhere else, and Vietnam on Steam - this is not possible, because Steam will not sell Vietnam to someone who does not have the base game on Steam.

[initially, it was possible to make this specific purchase - but Steam changed that fairly quickly.]

If you somehow did manage to make such a purchase, please contact Steam support to resolve this.

You have bought the base game on Steam, and someone has gifted you Vietnam on Steam - this works. You will also see Vietnam listed in your Steam client.

You have bought the base game somewhere else, and someone has gifted you Vietnam on Steam - well... Long story. The gifting will succeed. Steam will know that you have Vietnam, but you will not see it in the Steam client because you do not have the base game. Therefore you will not be able to view the 16-digit code for Vietnam. Contact Steam support to resolve this.

We have been in contact with Steam, and their support department is aware of the above.

The "Vietnam" menu in BC2 will say 'go buy the expansion' until Dec 18th. (It will still say so after you have bought the expansion.) After the 18th, the dialog will change to one where you are asked to enter your code.

Grand Master

Singh400

Posted
Posted

http://www.youtube.com/watch?v=76ZBP7cY8o8

Proper skill! (Y)

In other news, I'm finally getting close to making Rank 50! Decided that I'm playing so much again, that I might as well try and get to Rank 50. Proving a doddle. Finished up the UMP-45 and got the Platinum on that. Started on some of the Vietnam weapons too. Should be easy!

Grand Master

trag3dy

Posted
Posted

Anyone played this in a pro environment yet? I've been persuaded to join the European ladder got my first clan match in a couple of weeks. Should be interesting.

That is so true, it's unbelievable!

All I can say is.. be prepared to be frustrated by medics.

Grand Master

Singh400

Posted
Posted
:| That's it I refuse to play this game anymore because no matter what I will do from this point onwards it will never be as incredibly insane as that was!
If he plays like that all the time, then all credit to him. But you can make even the noobiest of noobs look good with some creative editing, and pasting frags ;l)
All I can say is.. be prepared to be frustrated by medics.
It's not that I'm worried about. It's the tactics! The sheer raw unadultered power of my USAS can deal with a whole squad of medics easy ;)
Proficient

gkl

Posted
Posted

Anyone played this in a pro environment yet? I've been persuaded to join the European ladder got my first clan match in a couple of weeks. Should be interesting.

That is so true, it's unbelievable!

Wait, aren't you in the USA? And I guess you'll have to brush up those MG36 skills. :D

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Windows 11 version 26H2 is now available for testing in the latest preview build

      By Captain_Eric · Posted

      Is the article messed up? I understand 26H2 is in Beta, now Build 28020.2308. I'm not even sure what this is supposed to mean: "..... Microsoft is officially moving the Experimental Channel to version 26H2." And...would you please fix your graphics. They are outdated and don't fit the article.
    • The Light of Life? We actually do glow till our Death, study finds

      By hellowalkman · Posted

      The Light of Life? We actually do glow till our Death, study finds by Sayan Sen Image by Rafael Rendon via Pexels A study by researchers at the University of Calgary has found that living organisms produce an extremely faint light known as ultraweak photon emission, and that this glow appears to drop significantly after death. The research was published in the Journal of Physical Chemistry in April 2025 and quickly drew widespread attention, leading to more than 200 news stories about the findings. Ultraweak photon emission (or UPE), sometimes called biophoton emission, refers to tiny amounts of light released by living cells as a result of normal biological activity. A photon is the basic particle of light, and researchers say every living system examined so far, including plants and animals, has been found to emit these photons. The glow is far too faint to be seen by the human eye. “I suppose it has a little to do with people being reminded of auras,” says Dr. Christoph Simon, PhD, one of the authors of the study and a professor in the Department of Physics and Astronomy in the Faculty of Science. “It is a fact that living beings glow. It’s a very weak glow, but it’s there and visible with very sensitive cameras.” According to the study, the light involved is extremely weak, ranging from 10 to 1,000 photons per square centimetre per second across a spectral range of 200 to 1,000 nanometres. For comparison, a nanometre is one-billionth of a metre and is commonly used to measure wavelengths of light. Detecting emissions at such low levels requires highly specialized equipment. To study the phenomenon, researchers used electron-multiplying charge-coupled device (EMCCD) and charge-coupled device (CCD) cameras. These imaging systems are designed to detect extremely small amounts of light, including individual photons, while minimizing background noise. The technology allowed researchers to capture signals that would otherwise be impossible to observe. The team worked with the Human Health Therapeutics Research Centre at the National Research Council of Canada (NRC) in Ottawa to examine photon emissions in mice. Researchers took two-hour exposure images of the animals before and after death and compared the results. “We saw that the level of light that they emit – this biophoton glow – is distinctly different between living and dead animals,” says Dr. Daniel Oblak, PhD, an associate professor in Physics and Astronomy and the corresponding author of the study. The images showed a clear decrease in photon emissions after death across the entire body of each mouse. According to the researchers, this provided direct evidence that living and dead tissue produce different levels of ultraweak photon emission. “It’s a very small amount and it’s, of course, very tricky to detect,” Oblak says. The study grew out of discussions between Simon, whose research interests include quantum biology, and Oblak, whose work focuses on detecting light for quantum communication experiments. Quantum biology is a field that explores whether processes described by quantum physics, which studies matter and energy at very small scales, may also play a role in living systems. “Since I work as a quantum physicist on light detection for quantum communication, I thought that experimentally we have a lot of the tools to be able to detect the light,” Oblak explains. The researchers also investigated UPE in plants and found that the light changed in response to stress. When plants were exposed to higher temperatures or physically injured, their photon emissions increased. Chemical treatments also affected the glow. Among the substances tested, the local anesthetic benzocaine produced the strongest emission response when applied to injured plant tissue. These findings suggest that ultraweak photon emission is closely linked to biochemical and metabolic activity inside living organisms. Metabolism refers to the chemical reactions that allow cells and organisms to stay alive and function. Because these reactions change when an organism experiences stress, injury or disease, researchers believe UPE may provide a way to monitor those changes. The researchers stress that the glow is a physical and biological phenomenon, not a metaphysical one. Oblak says more research is needed to understand exactly how the light is produced and what information it may reveal about the condition of living tissue. “We must understand what that is to figure out what’s happening,” he says. “If we can understand how that relates to certain influences on the body – stress, diseases – then that could be used as a diagnostic tool.” The researchers believe the technique could eventually help scientists study health and disease without invasive procedures. Because UPE can be measured without adding dyes, markers or labels, it may offer a way to monitor whether tissue is healthy, damaged or alive. In plants, it could help researchers better understand how organisms respond to injury, heat and other forms of stress. While the work is still in its early stages, the study demonstrates that ultraweak photon emission imaging can provide a non-invasive and label-free way to observe biological activity. Researchers say the approach could become a useful tool for studying vitality, stress responses and other important processes in both animals and plants. Source: University of Calgary, ACS publication This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • The official Funny Pictures thread

      By +Edouard · Posted

      Damn, I loved this show back in the day.  
    • Rufus 4.15.2393 Beta 2

      By Copernic · Posted

      Rufus 4.15.2393 Beta 2 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2393 Beta 2 changelog: Add RISC-V 64 support to UEFI:NTFS Improve the guards for using the "silent" option Improve the ability to cancel during write retries Improve progress reporting for compressed image extraction Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta 2 | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.43

      By Copernic · Posted

      Tixati 3.43 by Razvan Serea Tixati is a free and easy to use BitTorrent client featuring detailed views of all seed, peer, and file transfer properties. Also included are powerful bandwidth charting and throttling capabilities, and a full DHT implementation. Tixati is one of the most advanced and flexible BitTorrent clients available. And unlike many other clients, Tixati contains NO SPYWARE, NO ADS, and NO GIMMICKS. Tixati portable version is meant to run on a USB flash drive or other portable media. It stores all its configuration files in the same folder as the executable binary files, and all file paths are stored in a format relative to the program executable folder. It is important you do not delete the "tixati_portable_mode.txt" file within the executables folder. This file is what triggers Tixati to run in portable mode. (The executable binaries are actually the same as the standard edition binaries.) When running the portable edition from a USB flash drive, especially one that is formatted in FAT16/FAT32, you may experience some lag when initially loading a new transfer. This is because initializing and allocating large files on flash-based media consumes a greater amount of time and resources compared to a conventional hard-drive. Tixati has the following features: detailed views of all aspects of the swarm, including peers, pieces, files, and trackers support for magnet links, so no need to download .torrent files if a simple magnet-link is available super-efficient peer choking/unchoking algorithms ensure the fastest downloads peer connection encryption for added security full DHT (Distributed Hash Table) implementation for trackerless torrents, including detailed message traffic graphs and customizable event logging advanced bandwidth charting of overall traffic and per-transfer traffic, with separate classification of protocol and file bytes, and with separate classification of outbound traffic for trading and seeding highly flexible bandwidth throttling, including trading/seeding proportion adjustment and adjustable priority for individual transfers and peers bitfield graphs that show the completeness of all downloaded files, what pieces other peers have available, and the health of the overall swarm customizable event logging for each download, and individual event logs for all peers within the swarm expert local file management functions which allow you to move files to a different partition even while downloading is still in progress 100% compatible with the BitTorrent protocol Windows and Linux-GTK native versions available Tixati 3.43 changelog: Several major DHT improvements Added several screening heuristics to filter malicious DHT nodes, prevent Sybil floods Rewrote DHT search algorithms to add support for multi-path lookups Improved DHT logging, more details in several error messages Extended timeout lengths for outgoing queries over I2P Added incoming query / response per second to DHT table status display Updated Regex engine to PCRE2 Faster Search function, scans channel user profiles in much less time Fixed problems with file name parsing and date handling in RSS Faster and more accurate RSS filtering and episode number detection Several optimizations to global text processing functions, such as UTF-8 cleaning, line splitting, and token parsing Complete update of port-mapping UPNP/NAT-PMP engine, added PCP support, mapping over VPN support, and more Several refinements to default gateway detection on Windows / Android, which is used for port-mapping Support for IPv6 interface-scoped addresses, which is sometimes needed for IPv6 gateway detection and port mapping Full support for PCP port remapping, added backup zero-port query in case requested port is rejected New UPNP/NAT-PMP Monitor in Help > Diagnostics New reflected local port/location tracker that analyzes DHT replies to detect true port/location and NAT mapping type New TCP/UDP Ports monitor in Help > Diagnostics, with several statistic and information tabs, and a detailed event log Calculated/reflected local port is now used for port parameter in tracker queries and peer handshake Fixed several problems with Linux Wayland compatibility Completely replaced tray icon functions in Linux, new SNI implementation is now the default with GSI backup Implemented full DBus-Menu server to be used by new SNI tray icon implementation Replaced Linux tray balloon notification DBus client Rewrote auto-shutdown DBus interface for Linux Rewrote sleep inhibit DBus interface for Linux Dropped deprecated Linux dbus-glib dependencies Completely new Windows asynchronous file handling, now using IOCP model with several block-alignment optimizations Better handling of system network resets and interface down/up cycles Added option to fully clear configuration in Settings > Import/Export Remember last option checkboxes when using Import/Export Fixed minor I2P incoming connection routing problems Much faster I2P vanity host name finder Much faster channel user vanity key finder Raised length limit for torrent tracker remote failure messages to 120 from 64 Fixed problems setting download location on a torrent before the meta info is resolved Added location/MOC paths to category pane tooltips Several minor Web Interface fixes Refinements to static and scrolling ellipsizing layout routines Several fixes and improvements to single and multi-line text edit controls Many other minor fixes throughout the user interface A major overhaul of the Android framework has also been done: API target raised to 35, page alignment set to 16K Rewrote all inset processing routines Full rewrite of foreground service, application, and main activity objects New permission request routines Added multi-cast lock request before UPNP/LPDP discovery operations Fixed file permission and locking problems when loading .torrent from web browsers Fixed problems with Z-ordering of modal / non-modal and popup windows Fixed handling of back gesture on newer OS Added status bar icon adjustment based on status bar background color Added option in Settings > UI > Behavior to continue running in tray when task removed from recents App can be closed by swiping away notification Rewrote IME interface, fixed several problems with auto-correct, on-screen keyboard visibility, and cursor positioning Added full support for Android hardware mouse and keyboard function Added full tooltip implementation for Android hovering via mouse or other cursor device Full rewrite of popup menu widgets to better support hardware pointers and keyboard Added mouse cursor updating framework for Android hovering Added Settings > Import/Export to Android builds Added language file support to Android builds Download: Tixati 64-bit | Tixati 32-bit ~20.0 MB (Freeware) Download: Portable Tixati 3.43 | 114.0 MB Download: Tixati 3.43 for Linux | Android View: Tixati Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware

  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      514
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      83
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      72
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!