Recommended Posts

  • 4 months later...

I used to. I honestly have no idea what happened to them though. I think my mom might have tossed them when I moved one time. I have been thinking about building some new models, but I think I want to find more of a warhammer 40,000 type robot that looks really badass for my next one. Any suggestions?

I used to. I honestly have no idea what happened to them though. I think my mom might have tossed them when I moved one time. I have been thinking about building some new models, but I think I want to find more of a warhammer 40,000 type robot that looks really badass for my next one. Any suggestions?

this.

The next Gundam 00 movie should come with some nice 1/100 MG Gunpla's. I guess that I'll be getting those so that I'll have the first ones from the series and the last ones :D I never really wanted to spend money on the season 2 suits. The only one which looked great was Cherudim and Seravee looked kinda awesome.

^I used to have every one of those except the one with red wings. I loved the far left one with the fluffy wings from Endless Waltz. I definitely can not think of where they could be so I'm sure either my ex stole them or my mom tossed them during one of my moves

Oh, I agree, I want that Heavy Arms too.

I don't know about you guys, but I think the new Gundams (i.e 00) are too plain and simple compared to the old versions ... I like them with you know Big Guns.. heck even the Freedom had that booster pack (I apologize, I haven't seen Seed/Seed Destiny in a while). They were all Mobile Suits armed to the Teeth.

@iron2000: Those are some nice display cases. I should similar ones for my collection :p

@Razorwing: It's not a boosterpack for Freedom :p It's actually part of the whole Mobile suit. Or do you mean the METEOR that was equipped to Freedom and Justice? Also, that Unicorn model looks way awesome :D

I've got both Freedom Gundam and Impulse Gundam as well. Plus I got Strike Noir, Gundam Exia, Gundam Dynames, Gundam Virtue, Gundam Nadleeh, Gundam Kyrios, RX-78- 2, RX-78-5, RX-93-ν-2 Hi-ν, RX-79 [G] and a MS-06R-1A Zaku II Black Trinity.

The RX models are my favourite ones and on 2nd place comes the SEED models. Just because those look like real fighting machines. The RX models and the SEED models are really fun to build and I usually spread the build over 2 days. It makes it more fun plus then I'll be able to concentrate better on stickers, lol :p

So yeah, the RX models and SEED models are my faves due to them being loads of fun to build, and they just look awesome. The SEED models even look like the RX models a whole lot more than the 00 Gundams. It's why I'm hoping that they're going to return to the classic designs after Gundam 00 is done.

Oh well, at least we've still got 2 episodes of Gundam Unicorn the next 2 years and 1 episode left this year :D

Yes Cap, BOOOOOSSSSTEEERRR PACK! :laugh: aka Meteor.

SEED-HG-MeteorUnit.jpg

Too bad they didn't make a Master Grade one that will fit the MG Freedom.

I can't wait until this hit stores

Real Grade RX-78-2

real-grade-rx-78-02.jpg

real-grade-rx-78-03.jpg

WANT. It's 1/144, but I don't care.. It's one that is a must get :D

or you can always put a GN DRIVE in it and call it the 0 Gundam hahahaha

Yeah I do collect gundams for a few years now. But I left all my stuff when I moved countries and now I started again. I will post some pictures if I can find some time.

In my new apartment, I am trying to build a shelf to start displaying anime stuff.

I got 2 perfect grades, one master grade and a macross frontier valkyrie built on my shelves.

I still have one more macross frontier valkyrie, 1 master grade gundam unicorn and 3 more perfect grades (Gundam Astray Red Frame, 00 Raiser, Gundam Zero - my second one) waiting to be assembled.

I wish had enough time.

^Nice collection :)

@Razorwing: I'm definitely gonna buy that as well. To bad it's 1/144 but that's alright for such an awesome looking model :D There's also gonna be a PG Strike Freedom :woot: Definitely gonna buy that one as well (Y)

^nice collection indeed.. I don't have enough money for PGs :(. But from what I see, MGs are now pretty well done to the point they can match PGs except for some minor details. But on that note.. I can't seem to find any details on the PG Strike Freedom.. you got any?

Um, so what are these? They look like blatant rip-offs of the 1980's transformers, but don't look like they actually transform

I am joking, I know these things are epic and that certain transformers are blatant rip-offs (Jetfire)

Um, so what are these? They look like blatant rip-offs of the 1980's transformers, but don't look like they actually transform

I am joking, I know these things are epic and that certain transformers are blatant rip-offs (Jetfire)

Pretty sure Gundams can blow Transformers out of the water. (note I am also a TF fan aswell)

@Capric0rn : Bah I want to see a final product! LOL.

I had built 5-6 MGs before I tried my first PG (it was my first Wing gundam zero) but after I finished the PG, to be honest, it became really hard to get back to MG. There are some really good ones out there ofcourse. For example just recently I finished RX-93-2 Hi-v Master Grade, and it's a complete beauty. I had lots of fun building it and the finished unit looks incredible.

Here are a few pictures if the Hi-v that I found online from other sources:

hinu-1.jpg

25zsfgz.jpg

2504efc.jpg

But other than that, most MGs feel quite blank after doing a few PGs.

^I've got that MG RX-93-2 Hi-v model as well and it was loads of fun building it. Lots of parts and lots of detail. I can also see MSN-06S Sinanju on that last picture. It's on my "want" list and it has been for too long now. Should be getting that one soon as it looks really great!

To be honest, I'm not too sure about getting PG sets just yet. I've got not enough room for them and my collections is consistent of only 1/100 MG. PG Strike Freedom might change this though :ninja:

@Razorwing: I want to see the final product too, lol. I bet it's gonna look awesome with it's wings attached etc :D

To be honest, I'm not too sure about getting PG sets just yet. I've got not enough room for them and my collections is consistent of only 1/100 MG. PG Strike Freedom might change this though :ninja:

That's a valid point. After you build a PG, all the other 1/100 MGs start looking like little children if you put them next to each other. Here is the picture of my MG RX-93-2 Hi-v and PG RX-178 Gundam A.E.U.G. MK-II together:

img0513g.jpg

I actually really like the look of these things... So how do you make them? Are they platic? Do they snap together, do you paint them?

There are 3 basic complexity levels, HG - High Grade, MG - Master Grade and PG - Perfect Grade. The parts are plastic, some of them metal, and they are pre-painted, you remove them from their holder and they snap together, no glue required. Some people paint them and start adding effects like weathering, or battle damage, but its up to you, they are fine even if you don't paint them. The ones in the above picture are not painted, just some panel lining.

This topic is now closed to further replies.
  • Posts

    • I really hope the author's health is ok. Squirreling away a official backup of this software. Looks like the internet archive already cached a copy as well - https://web.archive.org/web/20...ldbit-soft.fi/software.html
    • AMD is supported out of the box in linux because of their open source driver. Nvidia does not. All my systems are amd and all of them work nicely on linux arch without doing anything.
    • Never had a problem with TPM and started using that many years ago in Win10. Through several motherboards and OS versions, it just does what it does without complaint. My games library doesn't even know it's there. Secure boot does a lot more than support anti-cheat, as it came along long before anti-cheat software. I've used it religiously since before I started using TPM, and I always liked it for being able to nullify virus contagions that try their best to come in underneath the firmware during boot, so that the OS doesn't see them, etc. That is its purpose, imo. I'll never understand why people who elect to use another OS feel compelled to run down Windows... I guess they need to do that to feel secure about their choices? I run Windows because it supports all the software (including games) natively that I want to buy, and I've never had to run down another OS to make me feel better about it. (Although it's certainly possible to do that, of course...) Win10 is on a ventilator atm, and Win11 is very close to being free, and I finally got to stop running StartAllBack as I moved to the Experimental/Dev channel and my 26300.8553 build supports the moveable taskbar and it's running fine at the top of the screen! Finally, my last major dislike of Win11 is being rectified! So, I'm not at all surprised to see Win11's share of the Steam survey hitting 70%.
    • I can answer about the Linux bit. I only used AMD GPUs. I currently have a 9060XT (8GB) that fits my needs, I'm not a gamer, so I don't need that much GDDR. But lately, NVIDIA has grown a lot in the recent years. Oh, the horrors of NVIDIA drivers not working. But they have been getting better. I know a lot of members onm here that are running cachyOS and other distros, and are fine with a 4090/5090 variants. Really, though, I would stick with AMD variants.
    • Everything they say you can already do yourself on the registry by changing some things.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      252
    3. 3
      Steven P.
      71
    4. 4
      +Edouard
      69
    5. 5
      FloatingFatMan
      68
  • Tell a friend

    Love Neowin? Tell a friend!