Recommended Posts

Oops, I forgot to take the shots from RX-78-2 XD Made a reminder of it on my phone just now so I'll take them tomorrow. I like some bulky Gundam's but the Full Saber set is something that I do not like :p

1080p does some awesome things to Gundam 00 if you've previously seen it in 720p rips from TV with a big load of compression added to it. I'm currently rewatching the whole show in 1080p (a Blu-ray rip) and it looks better then I could've imagined. Also, I just started the 2nd season and saw the episode "Twin Drive". I believe I have found a new love for Gundam 00 that I was previously missing :p I now need it in 1/100 MG, LOL.

The only one i have is the Wing Gundam Zero Custom i got at a Convention for $170 it has 3K pieces and articulated fingers and everything I LOVE that model (site in my living room on a stand)

1080p does some awesome things to Gundam 00 if you've previously seen it in 720p rips from TV with a big load of compression added to it. I'm currently rewatching the whole show in 1080p (a Blu-ray rip) and it looks better then I could've imagined. Also, I just started the 2nd season and saw the episode "Twin Drive". I believe I have found a new love for Gundam 00 that I was previously missing :p I now need it in 1/100 MG, LOL.

Obviously it will look awesome! but honestly, the designs from 00 look really plain. I think I've said this before. Love the Seed and Seed Destiny Gundams. Especially Freedom/Strike Freedom and Destiny. Loving those wings :D

The only one i have is the Wing Gundam Zero Custom i got at a Convention for $170 it has 3K pieces and articulated fingers and everything I LOVE that model (site in my living room on a stand)

Cool man! take some pics of it to share!

^That's true. But they also try to break away from the typical Gundam designs we've seen in the past yet maintaining that design. If you know what I mean.

@littleneutrino: I bet that's the PG 1/60 version. And I'm with Razorwing, take some pics! :D

I am eagerly waiting any news regarding a new Gundam series. I wouldn't mind if they kept using the political side of war (as seen in Gundam Wing and Gundam 00) for a new series. I just hope they'r going to pick a great artists for the mechanical designs and come up with perhaps something new like they did with Gundam 00. I just hope that they wont make it too futuristic.

I keep double posting in this thread :pinch:

Here's my RX-78-2:

RX-78-2.png

Sorry for the crappy quality.. I took the shot with my phone. Also, I didn't want to ruin the way my RX-79[G] and RX-78-5 are currently being displayed so I didn't put those next to the RX-78-2 :p

Note though that the sticker in the shield isn't the correct one, unfortunately.. It got ruined while applying it :/ I sometimes hate those special decals which you have to place and then press on with an object.

My 00 Qan[T] is almost finished. All I need to do is put some decals on it and build it's action base. And then I'll have to pose it :p

How are you applying the rub-on decals? What I do is I cut it out and the use tape (ordinary tape) and stick it on the part. Then I just rub it on the part. Usually I take off the part before I put it on if possible. Looking forward to the Qan[T] :D. I'm really wanting to get the 0 Gundam now. It's a perfect partner beside the RG RX 78-2.

^That's why I want to have 0 Gundam in MG 1/100 quality :p

Yeah, I apply those decals the same way you do it. Though just that one time, it decided to move while I was rubbing it :( I was so bummed out that I couldn't use the correct decal on the shield, lol. Though I was glad it came with extra decals so that I could at the least place the E.F.S.F. logo on it :p

LOL. It's alright, I've sometimes bummed a few as well. Only the really small ones which are ridiculous to put on. But yeah... I found more 0 Gundam fun. This custom is amazing.

oga.jpg

ogb.jpg

ogcc.jpg

1231.jpg

12344.jpg

0+Gundam+Completed.jpg

og22.jpg

0g33.jpg

I really wonder where he got the decals.. cause I"m now interested. :woot:

My 00 Qan[T] has similar decals to those :p The custom one looks way better then the original tbh. I just wished they'd realized a MG 1/100 version :p

Well that's why I posted it. Really convinced me to get it.. when it comes in stock. lol.

That looks awesome indeed :D Though for some reason those legs look a bit weird. It's due to all the panel lines :p Never seen a Gundam with that many panels on the legs. Oh well, it's a custom mod anyways :p

Also, don't expect the 0 Gundam Mod to get in stock :p

That looks awesome indeed :D Though for some reason those legs look a bit weird. It's due to all the panel lines :p Never seen a Gundam with that many panels on the legs. Oh well, it's a custom mod anyways :p

Also, don't expect the 0 Gundam Mod to get in stock :p

Well it's back ordered now at HLJ. and my local store doesn't have it. :pinch:

Good, good, was almost thinking you thought it was possible to buy mods :p 1/144 (besides the RG version of RX-78-2) isn't fun enough for me so I'm going pass :p

well it looks good to me, and even if it's not 1/100 MG quality, the articulation of it is really good from what I've seen (Y).

^But the hands are fixed XD Also, there ain't as many parts which is why there's no fun for me in 1/144 builds. I'm strictly sticking to 1/100 MG and up.

lol. Fair enough. You will definitely enjoy the RG Rx-78-2. (Y). btw, post more pics man!

^Lulz, thought about doing that just now and then read your post :rofl:

These were taken when I build Force Impulse Gundam:

DSC00041.jpg

And the famous scene recreated on my desk (somewhat):

DSC00029.jpg

...Well, RX-78-2 wasn't in that scene of course :p

And the Third Generation Celestial Being Gundams:

DSC00024.jpg

I found it funny how I decided to have Dynames shooting upwards instead of in front of him, like the rest :p Oh well, I found it an awesome pose. Might change Exia and Kyrios their pose as well. Got a nice one in mind for Exia so..

I also thought about getting another 1/100 HG Kyrios and an action base as I want to have it displayed both in Fighter mode and in Robot mode.

Also, Gundam 00 Qan[T] MG 1/100 can actually be changed into Quantum Burst Mode :D

This topic is now closed to further replies.
  • Posts

    • I think it depends on what you're looking for to do, and the time you have to spare. With my Dwarf 3, I easily spend 3-4 hour sessions; half an hour driving to an un-light polluted place, another half hour unpacking and setting up the smart scope + tripod for equatorial tracking, then 15 more minutes mucking around with settings and shooting calibration frames, spending a few hours shooting, merging with past photo sessions, etc. It's crazy how time flies and I often get home later than I expected. It's something I still need to set aside a good part of an evening to do, all in all. For one session, where you often need like four for best results when it comes to deep space objects. Even with a smart scope like Dwarf 3, regular non-astro photography is still way more approachable to people getting into photography. I find this is a time consuming niche no matter how I go about it. With practice, I can probably begin cutting time here but I think where smart scopes find their home is among people who love to shoot the night sky but don't have the spare time to go deep with the "navigator level" attunement to the night sky itself in addition to everything else. Having said this, _if_ you have even more time to spend on this hobby, it will probably be even more rewarding to do it more by hand and learn the skies and the details of how it all works.
    • I misread the title and thought Teams itself would be redesigned. Imagine having this one as a native WinUI app.
    • Dell, HP PCs ran into endless reboot, BitLocker recovery loops but Windows 11 isn't to blame by Sayan Sen Last month Neowin reported on a major issue on Dell systems wherein a bug in its official support tool was leading to endless blue screen of death (BSOD) and restarts. Following our report, Dell officially acknowledged its SupportAssist-related crash issue, confirming that the culprit is not Microsoft's operating system but rather a faulty version of its own remediation software. In a newly published support advisory, Dell stated that version 5.5.16.0 of Dell SupportAssist Remediation and Alienware SupportAssist Remediation can trigger blue screen errors and unexpected system restarts. The company notes that the problematic component operates independently of the main SupportAssist application, meaning users should not remove the primary SupportAssist software when troubleshooting the issue. According to Dell, the crashes are linked specifically to the SupportAssist Remediation service, which is bundled with SupportAssist OS Recovery Tools, and as such it has since released an updated version, 5.5.16.1, which is said to resolve the problem. Affected users are advised to first verify whether version 5.5.16.0 is installed by checking the Installed Apps section in Windows Settings. If so, Dell recommends updating SupportAssist OS Recovery Tools through either SupportAssist's "Update Software" feature or Dell Command Update. Dell also advises users to back up important data before performing the update and to ensure systems remain connected to power throughout the installation process. If you are still having issues though make sure to report to the Dell support forum. As it turns out though Dell is not the only PC maker currently dealing with update-related headaches as HP is also facing a separate but probably equally frustrating issue involving recent Windows Secure Boot updates that were released with recent Windows 11 Patch Tuesdays. Similar to Dell, HP also put up its own support article where it explains the issue. The company says that affected devices could hit a brick wall when booting as they run into a BitLocker recovery loop after the April 2026 updates. The problem appears to affect systems wherein the new UEFI Secure Boot CA 2023 certificates fail to apply properly. As such affected users will find themselves entering their recovery key over and over again despite the system otherwise functioning normally. HP says such PCs should be updated to the latest available BIOS version and configured with the necessary Secure Boot certificates before installing Microsoft's Windows 11 Patch Tuesday updates. Systems that are already experiencing the problem may require BIOS configuration changes to restore normal boot behavior. Admins can find information regarding that in the support article here on HP's official website.
    • Getting further away from the artistic study of mental disease that was the first game... (which never needed any sequels to begin with) But I get it, a company has to make money. And the second was at least visually impressive, if not in any other way.
    • If its the devs fault you would think Unreal would help M$ take full advantage of Unreal and work with them to fix the performance issues. Otherwise they are catching unwarranted bad press.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      246
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      69
    5. 5
      neufuse
      68
  • Tell a friend

    Love Neowin? Tell a friend!