Recommended Posts

Anyone use OpenDesire? It looks like it doesn't stray far from the official 2.2 update and only adds a little :)

The MoDaCo rom looks good as well.

I'm using OpenDesire right now. Have nothing to complain! It's close to stock, with a few added extras. Also there's plenty of updates, and the devs listen closely to people on their forum. :)

I'm using OpenDesire right now. Have nothing to complain! It's close to stock, with a few added extras. Also there's plenty of updates, and the devs listen closely to people on their forum. :)

Sounds good. Can you update without losing all your contacts/aps ect? (after the initial install of a custom rom) Some of the custom roms get updated so frequently.

I looked at OpenDesire but there seem to have been lots of complaints about it looking at the XDA thread. I went for DeFrost in the end, which works splendidly!

You can also install a new ROM without wiping, but in the case that you have any issues, you may have to do a full wipe/clean install. They do recommend that you do a Nandroid backup though before you upgrade, so that in the rare case that something does go wrong, you can do a complete restore.

Sounds good. Can you update without losing all your contacts/aps ect? (after the initial install of a custom rom) Some of the custom roms get updated so frequently.

Yeah I only needed to swipe when going from my 2.1 Sense ROM to 2.2 OpenDesire. After that I updated OpenDesire several times, and never had any issues with losing data. Better yet, I still had some unread notifications and they were still there after updating. Small but pleasant surprise.

I looked at OpenDesire but there seem to have been lots of complaints about it looking at the XDA thread. I went for DeFrost in the end, which works splendidly!

I only had an issue once, and that was when they switched keyboards in an update. Had some crashes, but they released an update the same day which fixed it.

:)

I think I'll go with OpenDesire then, looks like it keeps the Sense UI by HTC intact as well.

No it doesn't. Unless I've missed something new. :p

I do recommend trying the stock GUI though. I personally like it much better than HTC's "dumbed down" version. Put LauncherPro on that thing and you're ready to rock.

No it doesn't. Unless I've missed something new. :p

I do recommend trying the stock GUI though. I personally like it much better than HTC's "dumbed down" version. Put LauncherPro on that thing and you're ready to rock.

It doesn't? Ah right, might go with MoDaCo then it looks like it does run on Sense UI - http://android.modaco.com/content/htc-desire-desire-modaco-com/316565/24-aug-r8-modaco-custom-rom-for-htc-desire-with-online-kitchen-2-2-froyo/

I haven't tried MoDaCo yet. Still happy with OpenDesire so far. To be honest, I felt quite relieved when I ditched Sense. I liked it, but I like everything about the stock UI better. :) Just feels more fresh and modern. Also I hated the Sense browser. :p

Guess I just have that feeling of wanting to experience what I buy first :p

Plus a dog crapping in a bag is better than iOS, so I'm sure I'll love Sense to start with, or forever.

I just don't want to dive right into heavy customization/etc, want a nice light custom rom similar to what stock would be but with some tweaks/extras.

Thanks for all the help guys!

ps. Can't you get Opera or something from the droid store? Chrome should really be on these phones by now lol.

Guess I just have that feeling of wanting to experience what I buy first :p

Plus a dog crapping in a bag is better than iOS, so I'm sure I'll love Sense to start with, or forever.

I just don't want to dive right into heavy customization/etc, want a nice light custom rom similar to what stock would be but with some tweaks/extras.

Thanks for all the help guys!

ps. Can't you get Opera or something from the droid store? Chrome should really be on these phones by now lol.

Yeah that makes sense. :) You can always go for more customization if you get bored.

I believe there's Opera 10 Mini or something in the Market. Tried it, but didn't like it. :p The stock browser looks alot like Chrome though. Not sure if it is. Pretty sure the Sense browser works on the same technology. So you should be fine.

Another question (please don't be mad people :p)

Why is it all the custom roms include A2SD/A2SD+? I thought 2.2 added the ability to install an Application to your SD card?

Thanks

2.2 does add the ability for apps to be stored on your SD card, however the developer of that app needs to specifically code that in. Where as A2SD+ pushes all apps onto your SD card.

A2SD = Froyo 2.2 apps on SD card

A2SD+ = ALL apps onto SD card

I would go with ROMs with A2SD+ ;)

Also, to answer your earlier question. One click root, called unrevoked. Nothing hard at all.

Another question (please don't be mad people :p)

Why is it all the custom roms include A2SD/A2SD+? I thought 2.2 added the ability to install an Application to your SD card?

Thanks

Android 2.2 A2SD isn't A2SD, it's rubbish in comparison. It allows you to move an app (not its data, just the app itself) to SD after you install it to internal memory and nothing more.

Proper A2SD and A2SD+ allows moving of everything to the SD-EXT partition and this also includes Cache2SD and you end up with more free internal memory and better performance.

2.2 does add the ability for apps to be stored on your SD card, however the developer of that app needs to specifically code that in. Where as A2SD+ pushes all apps onto your SD card.

A2SD = Froyo 2.2 apps on SD card

A2SD+ = ALL apps onto SD card

I would go with ROMs with A2SD+ ;)

Also, to answer your earlier question. One click root, called unrevoked. Nothing hard at all.

Thanky buddy, I got it all planned for tomorrow, unrevoked, then MoDaCo :)

edit: What's this about formatting the memory stick correctly for A2SD+ though?

Thanky buddy, I got it all planned for tomorrow, unrevoked, then MoDaCo :)

edit: What's this about formatting the memory stick correctly for A2SD+ though?

That is nothing to worry about...

Singh's mini guide

1) If you have an Orange branded handset, make sure you unlock it first

2) Root it using unrekoved (tip, run the exe as admin, right click and select as admin)

3) Create a nandroid backup

4) Then flash your radio - some ROMs require very specific radios. Most need a radio of 5.x+ now

5) Then flash your ROM, then LEAVE IT alone. Go away, and leave it for atleast 15 mins. If it gets stuck on the HTC logo screen or the boot screen. Do not panic. Reboot back into the boot loader, and clear all the caches, including the dalvik cache.

6) Once you have finally booted into your custom ROM, give it a couple of minutes to settle down after you finish the set up process.

7) Download ROM Manager straight away from the Market. And then create the EXT2 (or EXT3) partition. When prompted, select 512MB size of partition, and then select 0mb swap.

8) Reboot

9) Profit.

Good luck!

That is nothing to worry about...

Singh's mini guide

1) If you have an Orange branded handset, make sure you unlock it first

2) Root it using unrekoved (tip, run the exe as admin, right click and select as admin)

3) Create a nandroid backup

4) Then flash your radio - some ROMs require very specific radios. Most need a radio of 5.x+ now

5) Then flash your ROM, then LEAVE IT alone. Go away, and leave it for atleast 15 mins. If it gets stuck on the HTC logo screen or the boot screen. Do not panic. Reboot back into the boot loader, and clear all the caches, including the dalvik cache.

6) Once you have finally booted into your custom ROM, give it a couple of minutes to settle down after you finish the set up process.

7) Download ROM Manager straight away from the Market. And then create the EXT2 (or EXT3) partition. When prompted, select 512MB size of partition, and then select 0mb swap.

8) Reboot

9) Profit.

Good luck!

Really, thanks a lot! My ROM says it includes the newest radio so I think I can skip step 4, but the rest will help loads!

If you use unrevoked then flash AmonRA's R5 recovery, this puts a permanent recovery on the phone just like previous android phones (g1/nexus 1, magic etc) and means you don't need rom manager or an update.zip any more.

It also has a lot more features compared to the fakeflash methods used by rom manager and unrevoked.

If you use unrevoked then flash AmonRA's R5 recovery, this puts a permanent recovery on the phone just like previous android phones (g1/nexus 1, magic etc) and means you don't need rom manager or an update.zip any more.

It also has a lot more features compared to the fakeflash methods used by rom manager and unrevoked.

Not quite sure I follow much of this :p

All I have to go on for my ROM is

To install this ROM:
  • Ensure you have are able to launch the custom recovery image (see 'requirements' above)
  • Download the zip file of your choice from the links below (or the online kitchen) and copy to your SD card
  • Restart your device in recovery mode
  • PERFORM A NANDROID BACKUP FROM THE MENU
  • Select the option to apply an update zip, and select the zip file you copied to your memory card

If that's the way I have to update I guess I should just leave it alone?

Thanks though I'm just soo new too all of this, if it's jailbreaking or customizing the iPhone I'm fine haha.

If you use unrevoked then flash AmonRA's R5 recovery, this puts a permanent recovery on the phone just like previous android phones (g1/nexus 1, magic etc) and means you don't need rom manager or an update.zip any more.

It also has a lot more features compared to the fakeflash methods used by rom manager and unrevoked.

Unrevoked permanently flashes ClockworkMod Recovery to the recovery partition. It is always there. And you don't need an update.zip at all, just *.zip will do. All you have to do is select "install zip from SD card" and then select your zip (tip: drop zip in root of your SD card).

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.3 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.3 changelog: Fixes issues with MP4 files with more than 8 channels Fixes incorrect VBR detection for some CBR MP3 files Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      144
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      75
  • Tell a friend

    Love Neowin? Tell a friend!