Tripods?


Recommended Posts

So I used to own this tripod which I got for free as someone gave it to me, found out it costs $10 (at the time, it's now at $14 on amazon ), well i still own i, but my mum was nice enough to lose teh quick release plate a couple of months ago. :angry: So i googled for a new one and a new release plate cost more than the damn tripod! Long story short, looking for a new tripod locally, shipping of anything just for for sheer volume, would get me ass raped by my courier...

Anyway, I never had a complain about said tripod, it's very light weight, closes up to almost 1/2m ( 2-3ft) and when open up it goes to like 2.5m tall ( 7-8ft). The only complaint MAYBE is that the ball head doesn't tilt from side to side. Build quality is alright, lot's of plastic and metal, but nothing I would be afraid of placing my camera on...

So I was browsing amazon and man those gitzo tripods are crazy expensive some even around $700, when I could get a fully functionaly one for $14 :s Now I know... "yeah yeah I don't want to punt my $4K of camera equipment on a $14 tripod" So I say to thee, why not? It gets the job done, keeps the camera firm and tight in place for taking photos. Don't get me wrong, there probably are thousand of very cheap tripods that would break which is why people prefer uber expensive manfrottos or gitzos I guess. But in the long run, I can't see myself spending more than $50 on a tripod and even then I would think about it :p

Link to comment
https://www.neowin.net/forum/topic/893742-tripods/
Share on other sites

I got myself a sherpa or something to replace my old on that couldn't handle the increased weight of my D90 with batterypack and 300 lens :)

they're pretty damn awesome, good quality, fairly cheap (ok not 10 dollar cheap but..)

never heard of that brand i'll look into it :)

I think one possible concern with a cheap laptop is that it would get easily bent so your camera is no longer able to stay level. I personally just have a <$100 tripod which has worked fine for me, but I don't use it very often.

Laptop :p ? Yeah yeah I know :p

Well maybe that $10 isn't built like a rock and could get bent, but for that to happen I would have to either put my weight on it ( 230lbs ) or a couple of bricks :rofl:

@ Argote try $800 :/ carbon fiber craziness. Oh I agree for heavier equipment and whatnot, It's just unbelieveable IMO.

I ended up looking at second hand stores/thrift shops for a cheap one, still haven't found one, found 2, but without quick release. :(

Link to comment
https://www.neowin.net/forum/topic/893742-tripods/#findComment-592513062
Share on other sites

Sears/Kmart sells a few decent tripods for $15-20.

Here's a few. These links won't work in Firefox, btw. Poorly coded site.

Digipower Tripod w/ 3-Way Panhead $20

http://www.sears.com/shc/s/p_10153_12605_00354654000P

Digital Concepts Tripod, 55 in. 2-Way Panhead $17.99

http://www.sears.com/shc/s/p_10153_12605_107000000SAKTR60P

They actually have a large selection of tripods, in a wide range of prices.

Link to comment
https://www.neowin.net/forum/topic/893742-tripods/#findComment-592519024
Share on other sites

I ALWAYS take care of my gear and I went through two cheap department store tripods very quickly. Plastic and cheap metals don't last long, especially when dealing with heavy gear. Talk to lots of people in the photo community and you'll find that most agree that the tripod is not something you should cheap out on.

Link to comment
https://www.neowin.net/forum/topic/893742-tripods/#findComment-592519262
Share on other sites

Sears/Kmart sells a few decent tripods for $15-20.

Here's a few. These links won't work in Firefox, btw. Poorly coded site.

Digipower Tripod w/ 3-Way Panhead $20

http://www.sears.com/shc/s/p_10153_12605_00354654000P

Digital Concepts Tripod, 55 in. 2-Way Panhead $17.99

http://www.sears.com/shc/s/p_10153_12605_107000000SAKTR60P

They actually have a large selection of tripods, in a wide range of prices.

That first one looked like my old tripod.

works great for PS cameras and small DSLRs with small lenses. well on the DSLR It's not very stable and can be a bit hard to stabilize.

however once you get a bigger DSLR and/or a bigger lens, the head can't cope with the weight and no matter how hard you tighten, it'll just tip forward.

Link to comment
https://www.neowin.net/forum/topic/893742-tripods/#findComment-592520240
Share on other sites

It's not that cheap tripods don't necessarily offer the stability, but they break so damn easily, they're a waste of cash repeatedly buying vs a more expensive tripod that will last. Generally speaking, at least.

I had a cheap tripod I was using in Paris, and one of the legs snapped (thankfully not with a camera on it), so I tossed the whole thing, in its cute little tripod bag, into the nearest bin. I then got followed by four french police officers for about half an hour, after which they stopped me and had a rather long conversation which barely understood; the best I could tell, they thought it was extremely suspicious and I think they were trying to arrest me.

I'm currently using a not-expensive tripod from the 70s. It's not necessarily sturdier or offers firmer support, but for my purposes, it's fine, if a bit on the heavy side. One plus side, they don't make em like they used to, it's built like a brick ****house, and looks like it would survive a nuclear war.

Link to comment
https://www.neowin.net/forum/topic/893742-tripods/#findComment-592527332
Share on other sites

It's not that cheap tripods don't necessarily offer the stability, but they break so damn easily, they're a waste of cash repeatedly buying vs a more expensive tripod that will last. Generally speaking, at least.

exactly

I had a cheap tripod I was using in Paris, and one of the legs snapped (thankfully not with a camera on it), so I tossed the whole thing, in its cute little tripod bag, into the nearest bin. I then got followed by four french police officers for about half an hour, after which they stopped me and had a rather long conversation which barely understood; the best I could tell, they thought it was extremely suspicious and I think they were trying to arrest me.

Seems weird that FOUR french police officers NONE of them speak English. I went to Paris for 5 days last year and everybody spoke SOME amount of English.

Link to comment
https://www.neowin.net/forum/topic/893742-tripods/#findComment-592528632
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
    • I still use HexChat! Not really as ancient as the 1994 AutoCAD above my post, but I have never found anything better to replace it. Yes we still operate an IRC server https://www.neowin.net/irc/ 😛 
    • At work we still have a couple of people that use a version of AutoCAD LT purchased in 1994. This predates Windows 95 and works fine on versions of Windows up to XP. Its long since run in an locked down isolated XP VM, accessible via RDP. I did install LibreCAD for them, however they said it was just too different to get to grips with. In all fairness one of them is now 75 and the other is almost 60.
    • On my music making (non internet) PC Sony Acid Pro 7.0 Adobe Audition 2015 Korg Legacy Collection Windows 7 SP1
    • Anyway to download these versions without being on the Experimental builds?
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!