Best Affordable SLR Camera for Novice


Recommended Posts

Hey guys,

I've been toying with the idea of buying an SLR camera.

I was pretty set on the Nikon D90 DX for ~$1000*, but then I saw that the Canon T1i is only $700* and seems to be the a better buy.

*prices on Amazon.com

What would you guys suggest?

Also, what about the Nikon D5000? I can get it on Amazon new for $640.

And concerning lenses, should I buy the frame with the default lens or should i upgrade? If so, to which one?

Remember, I am a novice photographer, semi-limited budget (no more than $1000) and want quality.

Thanks guys. I've been going through some topics here and you seem knowledgeable. Help a brother out!

-Will

Have you played with either one? There's a big difference between the way canon and nikon feel in your hands and their UI.

I'd take a D90 over the T1i or the D5000, but the T2i is better I think.

Lenses are more important to image quality than the camera body, so maybe go with the D5000 or T1i and spend money on lenses.

Which lenses? It depends on what you want to do with the camera. Let us know.

I have handled a D90 and really liked it.

And the lens I was thinking (if I didn't stick with the stock lens) would be the Canon EF-S 55-250mm unless you have a recommendation for something else? I'm all ears.

The first thing you should learn is you can't mix cannon and nikon lenses. For instance, if you have a Nikon camera, you can't use a Canon lens

The first thing you should learn is you can't mix cannon and nikon lenses. For instance, if you have a Nikon camera, you can't use a Canon lens

Thanks for the clarification. I was curious about that, because Amazon recommended me that lens when I was on the D90 page. Stupid, I know.

and might I add, at those price points those are not really entry level DSLRs

I have the cash to go up to $1000, and I want to buy a camera so I don't have to buy another one for a while.

I'd rather pay a little extra for a better piece of equipment that I know is a great product and will last me a long time.

I am thinking of getting the Canon EOS Rebel T2i EF-S 18-55IS Kit. It's listed at $899 on Canon's website but I'm sure I could find it for less. What do you all think of it?

Great camera that is definitely not entry level. Price is listed retail price. Read my advice from earlier. Look at spending a few hundred of your $1000 on lenses. You'll regret it if you don't.

What will you be using this for? Do you need video?

If you want my advise, use Bing Cash Back, and get 20% off of this: http://www.bestbuy.com/site/Nikon+-+12.3-Megapixel+Digital+SLR+Camera+-+Black/9311755.p?id=1218082646627&skuId=9311755

Then go get a telephoto lens.

I don't need the video but it's one of those things that is nice to have. I currently have a Canon Powershot SX 1 IS which is no longer available. If I could I would get a full frame sensor but... those are too much at the moment. The main problem that I have with my current camera is its poor low light performance. Anything more than ISO 800 there is noticeable grain/noise. I use it for pretty much everything from portraits to landscapes and nature.

The D90 was my very first camera. Back when bing had 30% cashback I bought one for $600 and lenses for $180 or so. Such a good deal, but somehow it became defective (I think?) and I could no longer get any good shots so I sold it and built a computer instead, lol. But man, it was really easy to learn and it felt great in your hands. The extra buttons were so useful. I've never used a canon but I'm sure they're equally as great, so it's up to user preference.

I started to miss photography though, so I bought a D40 kit for $147 from a sears. I doubt you can find any left at that price 'cause they were discontinued a while ago, but keep an eye out just in case. I think the D40 is more entry level than D90, but it can't really compete with the D90 at all... I miss the bigger body and motor for non-DX lenses...

$1000 is not entry level. Something like the Canon XSi is entry level. It will cost you around 400-480 for a new body. That is usually the entry level price. I wouldnt buy a $1000 camera and then not know how to use it. the worse thing is when you buy something expensive and not know how to handle it. it is waste of money. For a novice start with the Basic DSLR

I'm contemplating which lens to buy. I want it to be a one-and-done lens. a good one with a quality zoom and crisp image.

A D90 and which lens? Anyone want to shoot?

There is no perfect lens, especially a zoom lens. Zoom lenses are bet at their mid-zoom point, they get worse on each side of that. Zoom lenses are handy and you can get some great shots with them, but primes are the best for crisp images

Also note that lenses usually depreciate much slower than bodies so they're a far better investment.

The D90 with the kit lens should be pretty nice, if you can get something like an 18-105 kit lens then much better.

http://www.bhphotovideo.com/c/product/580422-REG/Nikon_25448_D90_SLR_Digital_Camera.html

http://www.bhphotovideo.com/c/product/680673-REG/Canon_4462B005_Canon_EOS_Rebel_T2i.html

Try to find them somewhere else for less :p

Yeah. haha.

Okay, I have been considering cheaper alternatives. I've been reading reviews on the D40 and it's pretty much unanimously positive for it. And it's quite cheaper. What price would you say for the D40? On Amazon I can get it for $527 new with the stock 18-55mm lens.

Or pay $120 more for the D5000 with the 18-55mm lens.

There's such a massive difference between the D40 and D5000. Don't get anything less than the D5000. The D5000 has the same sensor as the D300s, an $1800 pro camera. That makes it very good deal for the price.

Oh and they don't even make the D40 any more; it's been replaced by the D3000.

There's such a massive difference between the D40 and D5000. Don't get anything less than the D5000. The D5000 has the same sensor as the D300s, an $1800 pro camera. That makes it very good deal for the price.

Oh and they don't even make the D40 any more; it's been replaced by the D3000.

+1 The D40 is maybe a tier or two below the D5000 all around (noise performance/metering/fps/sensor/) and the D3000 doesn't exactly fill the gap.

Like Crazzy says, get the D5000, Same sensor in D90 and D300s.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Researchers claim Microsoft's quantum breakthrough is flawed by basic Python errors by Karthik Mudaliar Microsoft's aggressive roadmap to deliver a commercial quantum supercomputer by 2029 has now hit a bit of a snag, and it's not because of a complex sub-zero dilution refrigerator, but rather because of a few lines of basic Python code. A new critique published in the scientific journal Nature argues that simple software errors effectively manufactured the breakthrough that Microsoft's foundational research claimed back in 2025 into Majorana-based topological qubits. Topological quantum computing, the path that Microsoft chose for its research, relies on creating and controlling "Majorana zero modes." These are exotic quasiparticles that theoretically offer vastly superior error resistance compared to the highly sensitive superconducting qubits currently being championed by rivals like Google and IBM. However, physically proving you have created these particles requires sifting through massive amounts of complex electrical conductance data to isolate a specific "topological gap." Because of the sheer volume of data, physicists rely heavily on custom software pipelines to process the results. This is where the Python scripts come in. Now, according to the critique, Microsoft’s data processing software contained fundamental programming errors that ultimately skewed the published results. By mishandling data arrays or deploying incorrect logic within the Python script, the software supposedly discarded "noisy" or contradictory data. Which is why it only highlighted the specific electrical measurements that supported the topological-gap claim. The researchers behind the critique argued that this makes the findings invalid, suggesting the heralded "quantum leap" was actually a false positive generated by bad code and not a product of groundbreaking physics. However, Microsoft is pushing back hard against these allegations. The Redmond giant has formally rejected the criticism, saying that it's just a minor anomaly rather than a fatal flaw. According to the company, while there may have been a minor oversight in the data parsing scripts, it does not alter the fundamental reality of their physical experiment. Just weeks ago, Microsoft unveiled the Majorana 2 quantum processor, a milestone so significant that the company boldly accelerated its timeline for a commercial quantum supercomputer from 2035 down to 2029. But the new software allegations reopen an old wound. Microsoft's quantum division faced a remarkably similar crisis when a landmark 2018 paper on Majorana particles was famously retracted in 2021 after independent physicists discovered the data had been inappropriately cropped. That historical baggage makes the current Python-related allegations particularly sensitive. If the foundational math and data processing for the 2025 breakthrough are genuinely flawed, the highly anticipated 2029 commercial timeline could easily be delayed or, worse, cancelled.
    • Because of what they have done to VMware I will never buy anything Broadcom again.
    • AMD releases hotfix for driver install issues on Windows 10 PCs by Taras Buria Earlier this week, AMD released an important graphics driver update. Version 26.6.2 brought AMD FSR 4.1 support to the previous-gen Radeon lineup, the RX 7000 series, giving users better upscaling tech that was previously locked to the newest GPUs. However, the driver turned out to be a little buggy, with users reporting installation issues on systems still running Windows 10. AMD quickly acknowledged the bug and today released a hotfix to resolve the problem. The AMD 26.6.3 Hotfix update is now available for download from the official website. Given that it is a hotfix release, it has only one change in its release notes: AMD announced the update on its official X account and added that a WHQL driver update with the necessary fixes would be released next week. Meanwhile, users can apply the hotfix or roll back to the previous driver using the official AMD Cleanup Utility. You can download AMD Software: Adrenalin Edition 26.6.3 Hotfix Preview Driver from the official website here. It is compatible with all currently supported graphics cards and 64-bit Windows 10 and 11. Full release notes are available on the same page.
    • With Microsoft now listening to its core audience and acting upon received feedback, fans can finally expect a much better version of Windows 11 than what was available five years ago. Here is to five more years, Windows 11! I guess we all need a good laugh now and again...
  • Recent Achievements

    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
    • One Year In
      Tom Schmidt earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      465
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      123
    4. 4
      Michael Scrip
      82
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!