97 members have voted

  1. 1. What race do you play as (the most)?

    • Protoss
      36
    • Terran
      38
    • Zerg
      14
    • Random
      9


Recommended Posts

My big question is, how do you know which units to attack singly or go all out (if thats the right term)..?

Think of starcraft as rock paper scissors. This counters that blah blah, so if the game seems to be going late game I generally try to a bit of this and a bit of that. Generally works out since they won't have anything to counter unit A if they massed a single unit. If you're playing a P v P game and you know your opponent is going Void, build stalkers and sentries. Bye bye viod ray.

i was 73% on plat league before i do campaign... now that im finished with brutal mode and all gold on challenges, im thinking going to for the 10-win streak that elude me; guess what, i got my 10-streak... 10-losing-streak >.< auto refinery and fly-in supply depots really spoiled me...

Yeah, Heard that slang as well. Its apparently a rush in the opponents teams area with cannons and just straight up building in their base.

Damn youth and their slang : P

neztea

A cheese is often known as a cheap win, where you may lose at the expense of not scouting. They often require great sacrifice and can often result in a loss if not unsuccessful.

http://wiki.teamliqu...tarcraft/Cheese

Well, I did not build a single building outside my main base, I did go with dual gateway/quick zealots though but that strategy will not put me far behind if it doesn't win and scouting will limit the effectiveness but not prevent damage.

I think that as the expansions are released we'll see some of the stuff from the campaign added into the multiplayer. The reason they haven't added it in yet is because the zerg and protoss don't have their uber upgrades yet. I hope this is the case because that predator unit is fun! :laugh:

Anyone did the In Utter Darkness on Brutal? That thing is just impossible. :/

dark templar wall off 3 entrance, then mass phoenix; build a crap loads of cannons inside your production area

once the carriers became buildable, mass build carriers

after the initial 4-5 waves, send the observer closer to the zerg spawning point; if you see overseer(s) actively snipe them down with phoenix before they start coming in, then retreat your phoenix. if your observer die, you must send another one in to replace it

beware of the multiple entrance attacks, you will need to split your phoenix group up to kill the overseer from both spawn points

when the pressure became too much (when one DT wall is broken down, and hopefully you are above 2k kills; my wall broken down at around 2.2k), retreat ALL of your troops - including the DT walls - to your main, give up the lower area. group around the mothership for stealth, then continue snipe down overseers when you see them

i have about 2.8k kill when the mission ends; the key to the success of this mission is snipe down the overseers BEFORE the army charge to your DT wall

^ Thank you for your post. This will surely help! :)

no problem... i was having a lot of problem with the mission too, always dying at 2.2k and 2.3k kills; then i finally decided to mass carriers instead of colossi, and always keep 15-18 phoenix per team in two teams before the wall falls. when you see an army is building up by the spawn point, you want to immediately send a group phoenix in regardless of the presence of overseer just in case; if you dont see one, retreat immediately before losing too many (likely losing 3-4 depending on the army composition near mid-game); if you do see one, sometimes two, kill them then immediately retreat, and restock your lost units. your void rays and carriers will be more than enough to take care of the nydus worm and fliers near the achieves. you might want to keep the nydus worm that popped on top of your initial cannon area alive, as it keeps on popping zerglings for easy kills

In Utter Darkness = 30xx kills on Brutal. :laugh:

Thanks to theclueless. :)

One thing though, I didn't make any units other than Phoenixes and Dark Templars (+3 armor / weapons / shield).

EDIT: Only All In remains. But I'll have to play the damn campaign again, because I killed the worms instead of the fliers.

Well I am officially taking a break from starcraft 2 for awhile.

After 8 losses in a row to maphackers. I'm kind of fed up with the ****.

I mean I can understand one game with a blatant hacker. But when its 8 in a row due to the same ******* team its pretty ridiculous.

I'm going to tell you right now. Do not get into Diamond if you can.

Cause you will play some of the same people over and over again.

So if you play hackers adapt to their strategy they adapt to your moves.

These guys were good but had to map hack to win.

The one zerg was maphacking so bad he sat on my base told his teammates what i had and were.

I had tanks set up for a mass reaper wall that was coming.

The guy completely avoided my tanks no scan, no overlords nothing.

He edged himself just away from my tanks line of sight and killed my scvs.

Then the other guy would bring in mutas and without any line of sight knew where i had my stalkers and flew by them and whenever i would move with observer sight he knew.

3 zerg match so no way they could of seen what I had. Then the randomly spawning nyduses in the fog of war was the best part of it!

w00 just an update to all of you.

Team ranked matches have been fixed so that you won't play more games out of your league then in league anymore.

So for all you silvers playing diamonds. be ready to play your respective leagues more often.

Tonight me and my team played against platinums and diamonds as usual since we are on brink of being promoted and you can tell the matches

were better picked because they were always close games.

So happy :D

Done with the single player. All achievements gained. Time to kick some butt. Protoss brethren, here I come! :cool:

congrat! on a side note... i beat all-in against fliers (kill the worms); with hive mind control, my base is literally swarmed with muta, brood lords, roaches and hydra; the game pretty much went to auto-pilot mode when the levi appeared, its just a matter of clicking the nova when it charges, and controlling the muta when they come

you should play the challenges, they are fun (and frustrating)

just thought i'd post this tool that i use to practice build orders, i saw Day9 used it in one of his tutorials a while ago

http://www.sc2mapster.com/maps/yabot/

download the and unzip

double click the map to load it in the map editor

File -> Test Document

it has some preloaded build orders to practice or u can just freestyle

you can also set the AI to none, or use Green Tea AI + a specific build order to practice against (don't forget to check the Use Custom Build Order box)

i found it very useful when trying to learn a new race or to just test out a build order you might have seen in a VOD

This topic is now closed to further replies.
  • Posts

    • Movavi Video Editor Plus 26.18.0 by Razvan Serea With Movavi Video Editor Plus, you can either enhance your video files with two or three simple steps, or turn them into something completely new. Create your own movies using multiple filters, transitions, and special effects: show multiple videos on one screen with the Picture in picture effect or change the background with the Chroma Key effect, imitate the camera zoom or make your video look like an old-style movie. Adjust video parameters such as brightness, contrast and colors. Stabilize shaky footage, improve video quality and remove defects. Create video presentations, tutorials or educational videos: add titles and record your own narration to create a video with voiceover. Import video from any source: TV-tuner, webcam, camcorder, or VHS. Drop multiple media files onto a timeline and let your imagination do the rest! Features at a glance: Video and audio editing on a timeline Edit, enhance videos Add background music Apply titles and effects Image quality improvement Hollywood-worthy effects High-grade titles and fades Digitize VHS tapes, record video from TV tuners Stabilize any shaky sections Support for a wide range of formats Prepare your videos for uploading to YouTube, Facebook, Vimeo, or any other website New in Movavi Video Editor 2026: 30+ fresh subtitle styles. Upgrade your automatic captions with new designs. Customize your text in the Styles tab with a single click. Optional advanced settings are also available in the dedicated Design tab. Subtitles in English – instantly! Translate auto-subtitles into English with a click – no dictionaries or online services needed. Once translated, configure and fine-tune the subtitles using the standard editing tools. 40+ adjustable effects. Enhance your videos in a click with new realistic effects – from dust particles and light leaks to retro-style and VHS. Every effect is fully customizable – so it will fit any clip perfectly and bring an extra spark to your edits. Ultra-fast playback. Show more in less time with video speed control of up to 100x. Perfect for epic time-lapses, long process recaps, or whenever you want to add some extra energy to your content. Magnetic zones are marked with dots, and the 1x value is indicated by a vertical line. Silence removal – in a click. Cut out unwanted pauses automatically or fine-tune the pause length and volume threshold yourself. Skip the tedious cleanup and make your videos more dynamic. Fast effect copying. Effortlessly duplicate any effect from one video to another: click Clip effects in the dropdown menu and proceed to copy or paste. Movavi Video Editor Plus 26.18.0 changes: This version includes small improvements for better editing. Download: Movavi Video Editor Plus 26.18.0 | 2.7 MB (Shareware) View: Movavi Video Editor Plus Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • JBL BAR 800 5.1.2 Dolby Atmos soundbar is an amazing deal today by Sayan Sen This Amazon Prime Day 2026 sales so far we have had a couple of nice deals related to sound and audio. First we have the Sennheiser HD 600 at its lowest ever price of just $225. Next we also have the Beats Studio Pro at its lowest price ever at just $150. However perhaps you prefer your gear to sound great on a larger scale, like throughout the room. In that case an all-in-one soundbar system can help and currently JBL's BAR 800 is a great deal for sure as it's up for grabs at just $600 (purchase link under the specs table down below). One thing that should be appreciated a lot about these JBL soundbars is their spec sheet and the frequency response data it provides. The firm is honest about it as JBL confirms the subwoofer is able to go down to 35 Hz at -6dB or F6. This means it should be covering 40Hz and up very well, where most of the bass lies. You miss out on a lot of sub-bass but that is to be expected given the price point and the subwoofer driver size. Speaking of which, it is a 10-inch driver and promises a max output power of 300 watts at 1% THD (total harmonic distortion). JBL also claims the system will provide you with a "True Dolby Atmos" experience. The surround speakers are wireless and battery-powered which means setting them up should be really convenient. The technical specs of the JBL BAR 800 are given in the table below: Specification Value Channel Configuration 5.1.2-channel soundbar system Dolby Atmos Yes, with 2 up-firing drivers Total System Power Output 720 W Soundbar Power Output 340 W Surround Speaker Power Output 2 × 40 W Subwoofer Power Output 300 W Soundbar Drivers 3 × 46×90 mm racetrack drivers, 3 × 20 mm tweeters, 2 × 70 mm up-firing full-range drivers Surround Speaker Drivers 1 × 46×90 mm racetrack driver (each speaker) Subwoofer Driver 10-inch (260 mm) wireless subwoofer Frequency Response 35 Hz – 20 kHz (-6 dB) Audio Inputs Optical, Bluetooth, Chromecast built-in, AirPlay, Alexa Multi-Room Music (MRM), USB* HDMI Inputs 1 HDMI video input HDMI Output 1 HDMI eARC output HDCP Version 2.3 HDR Pass-Through HDR10, Dolby Vision Bluetooth Version 5.0 Wi-Fi Version 6, 6E Streaming Services Chromecast built-in, Apple AirPlay, Alexa MRM Get it at the link below: JBL Bar 800-5.1.2-Channel Dolby Atmos soundbar with Detachable Surround Speakers (Black): $599.85 (Sold and Shipped by Amazon US with Prime) Prime subscription can be cancelled within three business days. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Microsoft releases PowerToys v0.100.1, fixes a bug that made remapped keys misbehave by Ivan Jenic Microsoft just released PowerToys v0.100.1, a patch update that addresses several stability and behavior issues found in v0.100.0. The v0.100.0 patch was a significant update for PowerToys, as it introduced all sorts of new features and additions, such as a rebuilt Shortcut Guide, a Command Palette Extension Gallery, webcam overlay support in ZoomIt, and more. However, the v0.100.0 version also introduced some bugs and stability issues. And now, Microsoft is addressing these issues in the new patch. The most impactful fix in this release perhaps is in Keyboard Manager, where remapped modifier keys were being delivered as system-key events, causing unexpected behavior in apps. The clearest example of this was Alt-to-Backspace remaps, deleting whole words instead of a single character. So, if you thought there was an issue with your keyboard, Microsoft just confirmed that it was PowerToys. Beyond the Keyboard Manager fix, v0.100.1 also addresses several other issues. It fixes a bug with Power Display that was preventing monitors from waking from standby correctly. Additionally, the new update patches Quick Access crashes on launch, and resolves a Shortcut Guide crash that occurred when switching between sidebar sections. Here’s the full changelog: Color Picker Fixed a bug where the main Color Picker window could appear inside the zoomed-in picker view Command Palette Fixed Run history initialization in AOT builds Fixed a bug where the Performance Monitor dock item could show ??? after restart Fixed the Hibernate command using the Sleep icon Limited the "pin to dock" dialog to displays where the dock is enabled Keyboard Manager Fixed modifier keys remapped to non-modifier keys being delivered as system-key events, which caused unexpected behavior in apps such as Alt-to-Backspace deleting whole words Power Display Fixed a bug where selecting On in the monitor power-state control did not wake a monitor from standby Fixed built-in display detection and brightness control on dual-GPU laptops where the internal panel is driven by the discrete GPU PowerToys Run Fixed VS Code Workspaces discovery after VS Code moved recently opened workspace data to shared storage Quick Access Fixed Quick Access flyout crashes caused by unhandled XAML exceptions during launch or page navigation Shortcut Guide Fixed a crash when navigating between Shortcut Guide sidebar sections Fixed number-key rendering in shortcut manifests and added a Postman shortcut manifest Updated bundled shortcut manifests to use the literal number-key token so number keys render correctly across apps ZoomIt Fixed a race condition in audio initialization for ZoomIt video recording You can download PowerToys v0.100.1 from the official GitHub releases page.
    • OBS Studio 32.2.0 Beta 2 by Razvan Serea OBS Studio is software designed for capturing, compositing, encoding, recording, and streaming video content, efficiently. It is the re-write of the widely used Open Broadcaster Software, to allow even more features and multi-platform support. OBS Studio supports multiple sources, including media files, games, web pages, application windows, webcams, your desktop, microphone and more. OBS Studio Features: High performance real time video/audio capturing and mixing, with unlimited scenes you can switch between seamlessly via custom transitions. Live streaming to Twitch, YouTube, Periscope, Mixer, GoodGame, DailyMotion, Hitbox, VK and any other RTMP server Filters for video sources such as image masking, color correction, chroma/color keying, and more. x264, H.264 and AAC for your live streams and video recordings Intel Quick Sync Video (QSV) and NVIDIA NVENC support Intuitive audio mixer with per-source filters such as noise gate, noise suppression, and gain. Take full control with VST plugin support. GPU-based game capture for high performance game streaming Unlimited number of scenes and sources Number of different and customizable transitions for when you switch between scenes Hotkeys for almost any action such as start or stop your stream or recording, push-to-talk, fast mute of any audio source, show or hide any video source, switch between scenes,and much more Live preview of any changes on your scenes and sources using Studio Mode before pushing them to your stream where your viewers will see those changes DirectShow capture device support (webcams, capture cards, etc) Powerful and easy to use configuration options. Add new Sources, duplicate existing ones, and adjust their properties effortlessly. Streamlined Settings panel for quickly configuring your broadcasts and recordings. Switch between different profiles with ease. Light and dark themes available to fit your environment. …and many other features. For free. At all. OBS Studio 32.2.0 Beta 2 changelog: Beta 2 Changes Fixed a CI deployment issue. There are no application changes since Beta 1. 32.2 New Features Replaced add source dropdown with new dialog [Warchamp7] Improved FPS selector UX [jcm93] Added missing file support for filters [exeldro] Added ability for plugins to set custom icons for new source types [cg2121] Included .webp files when adding a directory to Image Slide Show source [TarunCore] Added copy paste functions to frontend API [exeldro] Added filter to compose SDR into HDR [jpark37] Added delete as a hotkey to delete sources on macOS [PatTheMav] Added dynamic bitrate support to multitrack video [lexano-ivs] 32.2 Changes Forced Intel-based installations to update to Apple Silicon version on macOS [PatTheMav] This change means that OBS Studio versions built for Intel-based Macs but running on Apple Silicon Macs will automatically update to OBS Studio built for Apple Silicon Macs. If an installation was using third-party plugins, those plugins will no longer load until replaced with Apple Silicon versions. Fixed audio mixer state getting out of sync when changing settings via websockets or plugins [Warchamp7] Added theming for checked QToolButtons [glikely] Improved OpenGL performance slightly on low-end machines [kkartaltepe] Set minimum size for color source to 1 pixel [exeldro] Added minimum width to spinboxes [Warchamp7] Disallowed overwriting the crash handler [sebastian-s-beckmann] Applied process mitigation policies for Windows [notr1ch] Adjusted description of multitrack video [jhnbwrs] Changed new capture devices to use fallback frame rate by default [PatTheMav] Improved DLL loading behavior on Windows [notr1ch] Limited multitrack video config to Custom service [PatTheMav] 32.2 Bug Fixes Fixed OAuth and dock state save corruption [PatTheMav] Fixed group bounds not resizing when removing items [howellrl] Fixed canvas mixes not being restored after video reset [dsaedtler] Fixed some erroneous crashes during shutdown [Warchamp7] Fixed display capture sometimes capturing black after a duplicator failure [ThrowTop] Fixed color of controls dock output buttons in System theme [shiina424] Fixed virtual camera reset failures [stephematician] Fixed potential crash when user discards changes in the settings window [suogesi] Fixed incorrect return value in virtualcam filter [xtfo] Fixed source toolbar buttons not working after dragging a source into a group [Warchamp7] Fixed properties hint icon spacing [Warchamp7] Fixed potential crash when a video device reconnects on macOS [jcm93] Fixed an issue where PipeWire could fail on NVIDIA GPUs [hoshinolina] Fixed obs_canvas_get_video_info returning incorrect framerate [dsaedtler] 32.2 Deprecations Deprecated obs_properties_add_button [sebastian-s-beckmann] Download: OBS Studio 32.2.0 Beta 2 | Portable | ARM64 | ~200.0 MB (Open Source) View: OBS Studio Homepage | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Is a fast food restaurant a good metric to compare against?
  • Recent Achievements

    • One Year In
      OHI Accounting earned a badge
      One Year In
    • First Post
      Almohandis earned a badge
      First Post
    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      474
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      122
    4. 4
      Michael Scrip
      83
    5. 5
      Xenon
      72
  • Tell a friend

    Love Neowin? Tell a friend!