97 members have voted

  1. 1. What race do you play as (the most)?

    • Protoss
      36
    • Terran
      38
    • Zerg
      14
    • Random
      9


Recommended Posts

I play as Protoss (obviously), and I just got bumped to Gold league for 1v1! I'll probably be promoted to Platinum pretty soon, though. I am 10th in my division, and that's about where I was when it bumped me up into Gold.

For those of you who play Protoss, or have more knowledge of the game than I, how do you deal with corrupters? I've tried getting a lot of stalkers to defend my colossi against them, but then my ground army dies and the colossi just have to flee. Any suggestions on how to counter the use of these units?

I play as Protoss (obviously), and I just got bumped to Gold league for 1v1! I'll probably be promoted to Platinum pretty soon, though. I am 10th in my division, and that's about where I was when it bumped me up into Gold.

For those of you who play Protoss, or have more knowledge of the game than I, how do you deal with corrupters? I've tried getting a lot of stalkers to defend my colossi against them, but then my ground army dies and the colossi just have to flee. Any suggestions on how to counter the use of these units?

I play Zerg (1600 Diamond).

Good forcefields to block the Zerg ground army combined with running your Colossi back and blink stalkers quickly kill Corrupters.

Thanks for the tip, Duke.

I think my biggest problem at this point is my force fields in mid to late game. I can get a good force field on my ramp when I need to, but when it's more than one force field that needs to be cast quickly, I just don't have the micro for it. Many of the recent games I've lost were by poorly cast force fields.

Thanks for the tip, Duke.

I think my biggest problem at this point is my force fields in mid to late game. I can get a good force field on my ramp when I need to, but when it's more than one force field that needs to be cast quickly, I just don't have the micro for it. Many of the recent games I've lost were by poorly cast force fields.

Forcefields are the key to any good Protoss player.

Forcefields single-handedly caused me to switch out of Roach/Hydra against Protoss and instead I use an early timing attack of fast Muta/Zergling.

The key to Forcefields is to pick the location of your battles wisely. Know on each map where the bottlenecks are and try to lure the Zerg into them. Then cut off the Roaches from the Hydras. Without the DPS backup from the Hydras, the Roachs can't do much.

Personally, I think something needs to be done with Forcefields. In the hands of a newbie,they are useless because it is hard to micro your army and forcefield. In the hands of a pro, they are broken because it effectively cuts the opposing army in half unless they have either air units or massive units to stomp out the forcefields.

Many pros now spend a lot of their times trying to bait out forcefields before attacking.

Personally, I think something needs to be done with Forcefields. In the hands of a newbie,they are useless because it is hard to micro your army and forcefield. In the hands of a pro, they are broken because it effectively cuts the opposing army in half unless they have either air units or massive units to stomp out the forcefields.

Many pros now spend a lot of their times trying to bait out forcefields before attacking.

Doesn't good creep spread in ZvP even that out? With good creep, you can move a Zerg army around much faster than a Protoss ball of units. It just comes down to picking your battles wisely. For zerg, it's wide open spaces to get your units a nice concave. For protoss, it's a close-quarters choke you want the units to come through to allow for maximum splash damage from Colossi and effictive Force Fields.

Either way, it's a very interesting match-up.

Doesn't good creep spread in ZvP even that out? With good creep, you can move a Zerg army around much faster than a Protoss ball of units. It just comes down to picking your battles wisely. For zerg, it's wide open spaces to get your units a nice concave. For protoss, it's a close-quarters choke you want the units to come through to allow for maximum splash damage from Colossi and effictive Force Fields.

Either way, it's a very interesting match-up.

Casting forcefield is instant. You can set up 5-6 within 2 seconds. No way to move out the way.

Beside, you should be using observers to hunt down creep tumors anyways.

Been playing a lot this afternoon. I'm zerg, platinum league. There is one thing I just can't deal with, and that's a 4-gate rush on blistering sands. Usually when I see that coming, I'll plant 4-5 spine crawlers at my entrance and be fine. But on blistering sands, you have two entrances, and I can't really defend both with static defenses. So the toss simply attacks where the crawlers are not, and I get roflstomped. Any tips?

Been playing a lot this afternoon. I'm zerg, platinum league. There is one thing I just can't deal with, and that's a 4-gate rush on blistering sands. Usually when I see that coming, I'll plant 4-5 spine crawlers at my entrance and be fine. But on blistering sands, you have two entrances, and I can't really defend both with static defenses. So the toss simply attacks where the crawlers are not, and I get roflstomped. Any tips?

down vote blistering :p

sounds like you're just investing too much into static defense

1 or 2 spines at the front of your natural should be enough. keep a spotter overlord by the back rocks and make sure your creep spread is good so u can move in between your entrances quickly

i'm not sure what unit composition you're losing with

but hydras are good against gateway units

and early on roaches and lings can handle zealots and stalkers

so you can either open with ling speed and roaches or get some lings for early defense and get a quick lair and go for hydras

You don't defend a 4-gate push with Lair tech. It arrives at approx. 6:00 and any money spent on tech at that point won't help you survive (will make you lose). I can get roaches and lings but without the help of some static defenses, he can just outpower my army.

down vote blistering :p

sounds like you're just investing too much into static defense

1 or 2 spines at the front of your natural should be enough. keep a spotter overlord by the back rocks and make sure your creep spread is good so u can move in between your entrances quickly

i'm not sure what unit composition you're losing with

but hydras are good against gateway units

and early on roaches and lings can handle zealots and stalkers

so you can either open with ling speed and roaches or get some lings for early defense and get a quick lair and go for hydras

You won't have time for Hydras or decent creep spread (unless you want to sacrifice larava injections). Warpgate tech hits about the 6:15 mark.

You don't defend a 4-gate push with Lair tech. It arrives at approx. 6:00 and any money spent on tech at that point won't help you survive (will make you lose). I can get roaches and lings but without the help of some static defenses, he can just outpower my army.

I'm a diamond zerg, and I've been using a new strategy that doesn't seem that great on paper, but has been working surprisingly well in the current meta game.

One base muta.

During the beta, one base muta was actually a pretty popular strategy until fast expand made everyone forget about it. A Zerg that is on even bases with his opponent is almost bound to lose. However, I pulled out one base muta over the weekend and I stomped over 4-gate simply because they didn't expect it.

The big order is roughly (sorry off the top of my head):

-9 Overlord

-15 Spawning Pool

-15 Overlord

-16 Queen

-Immediately once the Queen pops out, upgrade to Lair

-Make a few Zergling and poke around and try to stop any scouting Probes <--this is very important.

-Once lair finishes, immediately drop a Spire.

-Build Zerglings and try not to spend any gas at all. Build up some Overlord buffer because Mutas are food heavy.

-Save up larva once Spire is close to finish

-The second Spire finishes you should have exactly enough gas and minerals to make 5 Mutas.

This should be at about the 6 minute mark. Fly the Mutas and start harrassing his base. Kill probes or just annoy him. The point is the he can't move out of his base if you are harrassing. While harrassing, expand and shift to roach/ling mix. Sometimes I build more Mutas, sometimes I don't get any more. Depends whether he gets static defense.

This takes advantage of the fact that most 4-gate rushes against Zerg are Zealot/Sentry heavy because they expect you to be defending with Roaches, Lings and Spine Crawlers. They might have 2-3 Stalkers which die quickly to Muta. Sentry don't do much and Zealots obviously do nothing.

Obviously not a perfect or long term strategy if people start wising up and using fewer Zealots, but I've had great luck with it so far.

Hey all. I just picked up SC II and I'm really enjoying the game. However, I'm a complete noob, and I have no idea what I'm doing half the time. Does anyone have any good websites for beginners?

Check out www.teamliquid.net. Is is the main page for the Team Liquid team, but they have a huge forum following as well as lots of livestreams of professional playing and casting of tournaments around the world.

Google "day9tv". Day9 is a professional caster who makes a daily video about Starcraft. His show is aimed at beginners as well as high-end players and is generally very entertaining.

Also, google "liquidpedia" which is a Starcraft II wiki hosted by Team Liquid. It has lots of build orders which can help you get started.

Check out www.teamliquid.net. Is is the main page for the Team Liquid team, but they have a huge forum following as well as lots of livestreams of professional playing and casting of tournaments around the world.

Google "day9tv". Day9 is a professional caster who makes a daily video about Starcraft. His show is aimed at beginners as well as high-end players and is generally very entertaining.

Also, google "liquidpedia" which is a Starcraft II wiki hosted by Team Liquid. It has lots of build orders which can help you get started.

Thanks so much. This is exactly what I was looking for.

The big order is roughly (sorry off the top of my head):

-9 Overlord

-15 Spawning Pool

-15 Overlord

-16 Queen

-Immediately once the Queen pops out, upgrade to Lair

-Make a few Zergling and poke around and try to stop any scouting Probes <--this is very important.

-Once lair finishes, immediately drop a Spire.

-Build Zerglings and try not to spend any gas at all. Build up some Overlord buffer because Mutas are food heavy.

-Save up larva once Spire is close to finish

-The second Spire finishes you should have exactly enough gas and minerals to make 5 Mutas.

When do you get gas?

When do you get gas?

I get my first gas at the same time as my pool. I get my second gas usually when the queen is half built.

The key is to build up your gas because Mutas are so gas heavy. The other key is to keep a close eye on your opponent because you will be very vulnerable.

But once you get 5 mutas, you can start taking map control.

  • 3 weeks later...

I absolutely hate Mutalisks. They're so annoying! It's hard to constantly defend myself from them. It makes it even harder to move out and attack my opponent's base.

Mutas are useful if you get them out at the right time. They're particularly fun if you catch a Terran trying to air drop a command center. Also fun if you can harass with them in ZvZ.

Against Protoss though, you'll just get lit up by Stalkers 9 times out of 10.

I play 2v2 Platinum with my friend and we both play Protoss. We often find ourselves getting harassed by Mutalisks with guerilla-style attacks. Either we defend our respective bases with Stalkers or we warp in some photon cannons (which results in having a smaller army). It isn't an issue late-game but it's definitely annoying when you're about to expand early.

I play 2v2 Platinum with my friend and we both play Protoss. We often find ourselves getting harassed by Mutalisks with guerilla-style attacks. Either we defend our respective bases with Stalkers or we warp in some photon cannons (which results in having a smaller army). It isn't an issue late-game but it's definitely annoying when you're about to expand early.

If they're going mutalisks instead of roaches, you should just mass zealots and walk all over them before they get a spire up.

I play 2v2 Platinum with my friend and we both play Protoss. We often find ourselves getting harassed by Mutalisks with guerilla-style attacks. Either we defend our respective bases with Stalkers or we warp in some photon cannons (which results in having a smaller army). It isn't an issue late-game but it's definitely annoying when you're about to expand early.

All you need is a forge--which you should have anyways to get upgrades--and 3 cannons in your mineral line.

Everywhere else, you can just move your army once he starts to harass.

Alternatively, you can just go Stargate to counter Mutas and Overlord hunt.

Patch 1.3.0 is now live (with new league icons).

Also, Blizzard decided to remove the Khaydarin Amulet upgrade for High Templars. There goes +25 starting energy. :(

This topic is now closed to further replies.
  • Posts

    • Bypassed Windows 11 shows surprising stability on ancient, completely unsupported hardware by Sayan Sen When Windows 11 was first released, one of the most complained-about issues with the new desktop Microsoft OS was its higher system requirements, which pushed many relatively modern and powerful processors and devices onto the officially unsupported list. Thankfully, they have not been updated again for the base OS, though systems require four times the memory and storage if they want to run AI-powered apps and features. As such, Windows 11 technically runs on 4GB of memory, and there is no imposed restriction on the generation of memory it supports. Speaking of memory, prices are extremely high nowadays for hardware, especially DDR5 and DDR4 kits due to the current silicon shortage, and there are also reports of it affecting DDR2 as well, and it might only be a matter of time before even DDR1 gets affected. Before that could happen, an enthusiast took an ancient DDR1-based system and decided to try out Windows 11 on it to see how well the modern OS would fare on such hardware. The system runs an outdated graphics card interface standard based on AGP, or Advanced Graphics Port, called AGP 3.0 or AGP8x. AGP was essentially succeeded by the modern PCI Express (PCIe) bus standard. The user behind the experiment is retro hardware enthusiast Omores, who built the system around an ASRock ConRoe865PE motherboard based on Intel's i865PE chipset from way back in 2003, around the time when AGP was still in fashion. What made this board special back in the day was its unusual support for newer Core 2 Duo and even Core 2 Quad processors while still retaining older DDR1 memory support and an AGP8X graphics slot, making it an ideal bridge or link between two vastly different generations. Powering the machine was Intel's Core 2 Quad Q6600 alongside 3GB of DDR1 RAM and an ATI Radeon HD 4650 AGP graphics card, one of the final and most capable GPUs released for the aging AGP interface. While installing Windows 11 itself was relatively easy by bypassing Microsoft's hardware checks, getting the graphics card fully functional proved to be some challenge. Microsoft had quietly dropped native AGP support after the earliest releases of Windows 10, meaning newer versions of Windows no longer include the necessary Graphics Address Remapping Table (GART) drivers required for proper AGP acceleration. Without them, AGP graphics cards typically boot up, though with limited functionality, and can often throw a Code 43 error in Device Manager. To work around the limitation, Omores extracted Intel's legacy AGP440 SYS driver from an early Windows 10 release and paired it with a modified INF file so Windows 11 would correctly recognize the chipset. Following this and combined with AMD's final 64-bit Catalyst AGP drivers from 2012, the Radeon HD 4650 was able to operate with full AGP 8X acceleration intact. The result was said to be surprisingly usable for hardware that is over two decades old. Hardware-accelerated H.264 video playback worked correctly and benefited apps like Firefox, while legacy applications and games ran without major graphical issues. The system also successfully completed the 3DMark 2001 benchmark, although performance naturally lagged behind what the same hardware achieves under Windows 7, which is significantly lighter than Windows 11. There was, however, one unavoidable limitation as Microsoft's Windows 11 version 24H2 introduces a mandatory SSE4.2 CPU instruction requirement that cannot be bypassed through installer modifications or registry tweaks. Since no AGP-era processor supports SSE4.2, Windows 11 version 23H2 effectively becomes the final release capable of running on such systems. Regardless, it is still a very cool feat and quite fascinating to see just how stable Windows 11 turned out to be on such unfamiliar hardware. Source: Omores (Patreon) via O_MORES (Reddit)
    • That will only really help other players that are also responsible for creating the problem.
    • Well, it's good to know that they have found a workaround to a problem that they helped create, I guess...
    • Meta is reusing old DDR4 RAM in its servers instead of buying new hardware by Ivan Jenic Image: Meta The global hardware shortage isn’t exactly news, as the entire world has been struggling with rising component prices for quite some time now. And while big companies certainly aren’t as affected as the average consumer, even they aren’t opposed to the idea of saving a few (million) bucks. Meta appears to have found a way to spend less on new hardware while also putting its outdated infrastructure to use, essentially killing two birds with one stone. The company has built a custom chip that lets it reuse memory from retired servers rather than buying new hardware. The chip is called Vistara and allows for connecting old DDR4 RAM from obsolete servers into new servers that rely on DDR5. The problem Vistara solves goes back to a basic mismatch in how long hardware lasts. Meta replaces its servers every three to five years, but the memory modules inside them are good for seven to ten. When a server gets decommissioned, perfectly usable DDR4 RAM goes with it. Meta is presenting the new method at today’s ISCA symposium, but The Register has got hold of a paper that explains how Vistara works. It's a custom ASIC that bridges DDR4 memory to newer processors via aCXL 2.0/1.1 interface over PCIe Gen5 x16. Meta pulls DDR4 sticks from old machines and installs them in dedicated units it calls MemServers, each of which pairs 768GB of DDR5 with 256GB of recovered DDR4. The operating system sees the DDR4 as an additional memory node and draws from it when the primary DDR5 is running low. Off-the-shelf CXL hardware couldn't do this, so Meta built its own. Existing interfaces bundle their own memory with the controller, which makes reusing old RAM sticks impossible. But Vistara separates the controller from the memory entirely, so Meta can plug in whatever DDR4 sticks it has on hand. Meta plans to deploy the new architecture in hyperscale infrastructure with millions of servers, which should mean that Meta’s AI datacenters will now be more efficient. The company is investing heavily in AI infrastructure, especially with its new AI model, Muse Spark, now widely available. All of this doesn't mean that Meta will exclusively rely on "recycled" RAM, but the company is still looking at considerable savings at scale.
    • Save up to 87% on ChatPlayground AI lifetime subscriptions by Steven Parker Today's highlighted deal comes via our Apps + Software section of the Neowin Deals store, where for only a limited time, you can save up to 87% on ChatPlayground AI: lifetime subscriptions. ChatPlayground AI puts the world’s top AI models in one powerful interface, letting you enter a single prompt and instantly compare outputs from multiple models to choose the perfect response for your needs. Boost productivity and creativity with access to the latest AI giants like GPT-4o, Claude Sonnet 4, Gemini 1.5 Flash, DeepSeek V3, and dozens more — all in one window. Whether you’re chatting, coding, generating images, or refining prompts, ChatPlayground AI equips you with advanced tools like prompt engineering, image/PDF chat, saved conversations, and AI image creation, plus priority support to keep your workflow seamless. Access the world’s best AI models Side-by-Side Comparisons: Enter one prompt & instantly view results from multiple AI models to find the best output for your needs 40+ AI Models: Includes GPT-4o, Claude Sonnet 4, Gemini 1.5 Flash, DeepSeek V3, Llama, Perplexity, and many more Multi-Function Platform: Access AI for chat, image generation & coding all within a single interface Web Browser Extension: Offers a Chrome extension to seamlessly integrate the platform into your browsing workflow Boost productivity with powerful features ChatPlayground Interface: Designed for seamless AI model comparison in one window Prompt Engineering: Refine & optimize your prompts for better, more accurate responses Chat with Images & PDFs: Upload visuals and documents to get context-aware answers Saved Chat History: Keep track of past conversations for reference & ongoing projects AI Image Generation: Create high-quality visuals powered by top AI image models Priority Customer Support: Get faster assistance whenever you need it What you'll get with the Unlimited Plan Includes unlimited messages/month Built for prompt engineers, startups, and teams who run experiments nonstop Includes priority access to new features and future models Good to know Length of access: lifetime Redemption deadline: redeem your code within 30 days of purchase Access options: Desktop Max number of device(s): Unlimited Available to both NEW & Existing users Updates included A lifetime subscription to ChatPlayground AI (Unlimited Plan) normally costs $619, but you can pick it up for just $79 for a limited time - that represents a saving of $530 (87% off). Click the link below for more details, always check terms and specifications before making a purchase. Get this ChatPlayground AI (Unlimited) for $79 (was $619) There are also two other discounted plans to choose from. Although priced in U.S. dollars, this deal is available for digital purchase worldwide. Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      539
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!