97 members have voted

  1. 1. What race do you play as (the most)?

    • Protoss
      36
    • Terran
      38
    • Zerg
      14
    • Random
      9


Recommended Posts

I play as Protoss (obviously), and I just got bumped to Gold league for 1v1! I'll probably be promoted to Platinum pretty soon, though. I am 10th in my division, and that's about where I was when it bumped me up into Gold.

For those of you who play Protoss, or have more knowledge of the game than I, how do you deal with corrupters? I've tried getting a lot of stalkers to defend my colossi against them, but then my ground army dies and the colossi just have to flee. Any suggestions on how to counter the use of these units?

I play as Protoss (obviously), and I just got bumped to Gold league for 1v1! I'll probably be promoted to Platinum pretty soon, though. I am 10th in my division, and that's about where I was when it bumped me up into Gold.

For those of you who play Protoss, or have more knowledge of the game than I, how do you deal with corrupters? I've tried getting a lot of stalkers to defend my colossi against them, but then my ground army dies and the colossi just have to flee. Any suggestions on how to counter the use of these units?

I play Zerg (1600 Diamond).

Good forcefields to block the Zerg ground army combined with running your Colossi back and blink stalkers quickly kill Corrupters.

Thanks for the tip, Duke.

I think my biggest problem at this point is my force fields in mid to late game. I can get a good force field on my ramp when I need to, but when it's more than one force field that needs to be cast quickly, I just don't have the micro for it. Many of the recent games I've lost were by poorly cast force fields.

Thanks for the tip, Duke.

I think my biggest problem at this point is my force fields in mid to late game. I can get a good force field on my ramp when I need to, but when it's more than one force field that needs to be cast quickly, I just don't have the micro for it. Many of the recent games I've lost were by poorly cast force fields.

Forcefields are the key to any good Protoss player.

Forcefields single-handedly caused me to switch out of Roach/Hydra against Protoss and instead I use an early timing attack of fast Muta/Zergling.

The key to Forcefields is to pick the location of your battles wisely. Know on each map where the bottlenecks are and try to lure the Zerg into them. Then cut off the Roaches from the Hydras. Without the DPS backup from the Hydras, the Roachs can't do much.

Personally, I think something needs to be done with Forcefields. In the hands of a newbie,they are useless because it is hard to micro your army and forcefield. In the hands of a pro, they are broken because it effectively cuts the opposing army in half unless they have either air units or massive units to stomp out the forcefields.

Many pros now spend a lot of their times trying to bait out forcefields before attacking.

Personally, I think something needs to be done with Forcefields. In the hands of a newbie,they are useless because it is hard to micro your army and forcefield. In the hands of a pro, they are broken because it effectively cuts the opposing army in half unless they have either air units or massive units to stomp out the forcefields.

Many pros now spend a lot of their times trying to bait out forcefields before attacking.

Doesn't good creep spread in ZvP even that out? With good creep, you can move a Zerg army around much faster than a Protoss ball of units. It just comes down to picking your battles wisely. For zerg, it's wide open spaces to get your units a nice concave. For protoss, it's a close-quarters choke you want the units to come through to allow for maximum splash damage from Colossi and effictive Force Fields.

Either way, it's a very interesting match-up.

Doesn't good creep spread in ZvP even that out? With good creep, you can move a Zerg army around much faster than a Protoss ball of units. It just comes down to picking your battles wisely. For zerg, it's wide open spaces to get your units a nice concave. For protoss, it's a close-quarters choke you want the units to come through to allow for maximum splash damage from Colossi and effictive Force Fields.

Either way, it's a very interesting match-up.

Casting forcefield is instant. You can set up 5-6 within 2 seconds. No way to move out the way.

Beside, you should be using observers to hunt down creep tumors anyways.

Been playing a lot this afternoon. I'm zerg, platinum league. There is one thing I just can't deal with, and that's a 4-gate rush on blistering sands. Usually when I see that coming, I'll plant 4-5 spine crawlers at my entrance and be fine. But on blistering sands, you have two entrances, and I can't really defend both with static defenses. So the toss simply attacks where the crawlers are not, and I get roflstomped. Any tips?

Been playing a lot this afternoon. I'm zerg, platinum league. There is one thing I just can't deal with, and that's a 4-gate rush on blistering sands. Usually when I see that coming, I'll plant 4-5 spine crawlers at my entrance and be fine. But on blistering sands, you have two entrances, and I can't really defend both with static defenses. So the toss simply attacks where the crawlers are not, and I get roflstomped. Any tips?

down vote blistering :p

sounds like you're just investing too much into static defense

1 or 2 spines at the front of your natural should be enough. keep a spotter overlord by the back rocks and make sure your creep spread is good so u can move in between your entrances quickly

i'm not sure what unit composition you're losing with

but hydras are good against gateway units

and early on roaches and lings can handle zealots and stalkers

so you can either open with ling speed and roaches or get some lings for early defense and get a quick lair and go for hydras

You don't defend a 4-gate push with Lair tech. It arrives at approx. 6:00 and any money spent on tech at that point won't help you survive (will make you lose). I can get roaches and lings but without the help of some static defenses, he can just outpower my army.

down vote blistering :p

sounds like you're just investing too much into static defense

1 or 2 spines at the front of your natural should be enough. keep a spotter overlord by the back rocks and make sure your creep spread is good so u can move in between your entrances quickly

i'm not sure what unit composition you're losing with

but hydras are good against gateway units

and early on roaches and lings can handle zealots and stalkers

so you can either open with ling speed and roaches or get some lings for early defense and get a quick lair and go for hydras

You won't have time for Hydras or decent creep spread (unless you want to sacrifice larava injections). Warpgate tech hits about the 6:15 mark.

You don't defend a 4-gate push with Lair tech. It arrives at approx. 6:00 and any money spent on tech at that point won't help you survive (will make you lose). I can get roaches and lings but without the help of some static defenses, he can just outpower my army.

I'm a diamond zerg, and I've been using a new strategy that doesn't seem that great on paper, but has been working surprisingly well in the current meta game.

One base muta.

During the beta, one base muta was actually a pretty popular strategy until fast expand made everyone forget about it. A Zerg that is on even bases with his opponent is almost bound to lose. However, I pulled out one base muta over the weekend and I stomped over 4-gate simply because they didn't expect it.

The big order is roughly (sorry off the top of my head):

-9 Overlord

-15 Spawning Pool

-15 Overlord

-16 Queen

-Immediately once the Queen pops out, upgrade to Lair

-Make a few Zergling and poke around and try to stop any scouting Probes <--this is very important.

-Once lair finishes, immediately drop a Spire.

-Build Zerglings and try not to spend any gas at all. Build up some Overlord buffer because Mutas are food heavy.

-Save up larva once Spire is close to finish

-The second Spire finishes you should have exactly enough gas and minerals to make 5 Mutas.

This should be at about the 6 minute mark. Fly the Mutas and start harrassing his base. Kill probes or just annoy him. The point is the he can't move out of his base if you are harrassing. While harrassing, expand and shift to roach/ling mix. Sometimes I build more Mutas, sometimes I don't get any more. Depends whether he gets static defense.

This takes advantage of the fact that most 4-gate rushes against Zerg are Zealot/Sentry heavy because they expect you to be defending with Roaches, Lings and Spine Crawlers. They might have 2-3 Stalkers which die quickly to Muta. Sentry don't do much and Zealots obviously do nothing.

Obviously not a perfect or long term strategy if people start wising up and using fewer Zealots, but I've had great luck with it so far.

Hey all. I just picked up SC II and I'm really enjoying the game. However, I'm a complete noob, and I have no idea what I'm doing half the time. Does anyone have any good websites for beginners?

Check out www.teamliquid.net. Is is the main page for the Team Liquid team, but they have a huge forum following as well as lots of livestreams of professional playing and casting of tournaments around the world.

Google "day9tv". Day9 is a professional caster who makes a daily video about Starcraft. His show is aimed at beginners as well as high-end players and is generally very entertaining.

Also, google "liquidpedia" which is a Starcraft II wiki hosted by Team Liquid. It has lots of build orders which can help you get started.

Check out www.teamliquid.net. Is is the main page for the Team Liquid team, but they have a huge forum following as well as lots of livestreams of professional playing and casting of tournaments around the world.

Google "day9tv". Day9 is a professional caster who makes a daily video about Starcraft. His show is aimed at beginners as well as high-end players and is generally very entertaining.

Also, google "liquidpedia" which is a Starcraft II wiki hosted by Team Liquid. It has lots of build orders which can help you get started.

Thanks so much. This is exactly what I was looking for.

The big order is roughly (sorry off the top of my head):

-9 Overlord

-15 Spawning Pool

-15 Overlord

-16 Queen

-Immediately once the Queen pops out, upgrade to Lair

-Make a few Zergling and poke around and try to stop any scouting Probes <--this is very important.

-Once lair finishes, immediately drop a Spire.

-Build Zerglings and try not to spend any gas at all. Build up some Overlord buffer because Mutas are food heavy.

-Save up larva once Spire is close to finish

-The second Spire finishes you should have exactly enough gas and minerals to make 5 Mutas.

When do you get gas?

When do you get gas?

I get my first gas at the same time as my pool. I get my second gas usually when the queen is half built.

The key is to build up your gas because Mutas are so gas heavy. The other key is to keep a close eye on your opponent because you will be very vulnerable.

But once you get 5 mutas, you can start taking map control.

  • 3 weeks later...

I absolutely hate Mutalisks. They're so annoying! It's hard to constantly defend myself from them. It makes it even harder to move out and attack my opponent's base.

Mutas are useful if you get them out at the right time. They're particularly fun if you catch a Terran trying to air drop a command center. Also fun if you can harass with them in ZvZ.

Against Protoss though, you'll just get lit up by Stalkers 9 times out of 10.

I play 2v2 Platinum with my friend and we both play Protoss. We often find ourselves getting harassed by Mutalisks with guerilla-style attacks. Either we defend our respective bases with Stalkers or we warp in some photon cannons (which results in having a smaller army). It isn't an issue late-game but it's definitely annoying when you're about to expand early.

I play 2v2 Platinum with my friend and we both play Protoss. We often find ourselves getting harassed by Mutalisks with guerilla-style attacks. Either we defend our respective bases with Stalkers or we warp in some photon cannons (which results in having a smaller army). It isn't an issue late-game but it's definitely annoying when you're about to expand early.

If they're going mutalisks instead of roaches, you should just mass zealots and walk all over them before they get a spire up.

I play 2v2 Platinum with my friend and we both play Protoss. We often find ourselves getting harassed by Mutalisks with guerilla-style attacks. Either we defend our respective bases with Stalkers or we warp in some photon cannons (which results in having a smaller army). It isn't an issue late-game but it's definitely annoying when you're about to expand early.

All you need is a forge--which you should have anyways to get upgrades--and 3 cannons in your mineral line.

Everywhere else, you can just move your army once he starts to harass.

Alternatively, you can just go Stargate to counter Mutas and Overlord hunt.

Patch 1.3.0 is now live (with new league icons).

Also, Blizzard decided to remove the Khaydarin Amulet upgrade for High Templars. There goes +25 starting energy. :(

This topic is now closed to further replies.
  • Posts

    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      222
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!