Neowin Digital Gallery

By SkyyPunk
in Digital Camera Lab

 Share

Recommended Posts

Experienced

remus_lupin

Posted
Posted

Yeah the 2nd one is better. From my experience (i'm no pro), I think what makes a great/interesting photo is an interesting subject! And also some good photography skills. I can sit here at my desk and take as many photos as I want of my coffee mug using good composition, proper exposure, aperture, etc. but at the end of the day it's still a boring old coffee mug. So get out there and just take a ton of photos of interesting stuff! It does also help to do a bit of reading/learning too. Enjoy the new camera.

Definitely true^ however... I actually have the most fun trying to make an interesting and cool photo out of something as ordinary as a coffee mug... Mind you, those photos usually don't turn out the way I plan, but when they do it's a great feeling... It's all about looking at things in a different way... But an interesting subject makes taking a good photo all the more easy!

5167294397_2178c6a2ff.jpg

Experienced

remus_lupin

Posted
Posted

yeah....I have a lot to learn...Well this is my first SLR

How about this?

post-169609-12895157306355.jpg

try not to upload it at such a large resolution, it makes it difficult to view properly... was this taken in automode or were you tinkering with the aperture?...

It looks a little grainy, idk what everyone else thinks... I personally think it should be more sharp/clear... maybe try lowering your ISO with outdoor shots as it is bright enough out (assuming this was outdoor, judging by the subject I am guessing it was)

Actually I think that the focus was just a tiny bit too close... it looks like your focused directly on the edge of the branch, maybe try focusing directly on the first bud (that I assume is the subject of this photo) that will make it a little more sharp, while unsharpening the edge of the branch just a tad.... sometimes (depending on the quality of the auto-focus system) when you are doing a super close up like that you need to be very precise and manual mode is the best solution (just to adjust the focus a tiny bit)

Edit: actually looking at it a second time, it looks like your focus is fine... idk what it is about the picture, it just looks... unclean... nothing that is your fault, I just think the ISO is too high? I'm not nearly as experienced as the other users on this forum, I am sure they know why

Grand Master

Argote

Posted
Posted

^ Yes, there is definitely Chroma and Luminance noise in that image, the Canon Rebel XS gets noisy at ISO 800 and higher if I recall correctly. Some noise reduction could help (though don't abuse it because it takes a heavy toll on the sharpness).

Experienced

remus_lupin

Posted
Posted

And so a solution to that would be to just lower your ISO (light sensitivity). Which will automatically decrease your shutter speed (assuming you are in aperture priority) which is fine since you are outdoors; there is enough light that you can afford to take the shot at ISO 320 or whatever since your shutter speed will still be fast enough to avoid unsharpness due to hand movement, especially because it appears you are using a large aperture (low f-value) - which you probably know by now results in a limited depth of field

Experienced

remus_lupin

Posted
Posted

I think my iso was set to 800. So for close-up pictures i should use lower ISO?

Well not necessarily close up photos exclusively, but generally when you can afford to use a low ISO DO SO. For example, let's say it's a bright day out and I am taking a photo at 1/2000th of a second, at aperture 7.1 and ISO 800... and I am taking a photo of an unmoving tree... If the tree is unmoving, why would I require taking the picture at 1/2000th of a second... I would be better off getting a more clear image at ISO 200, and take the photo at 1/250th of a second and aperture 7.1

If say, it is a little darker out, or if you are so close it is hard to get a lot of light into the image and your camera is choosing a shutter speed of 1/20th of a second with aperture 4.5 at ISO 200, then I would recommend increasing ISO JUST so your shutter speed is fast enough where you can take a photo without moving your hand too much... And that shutter speed depends upon if your subject is moving/staying still, your focal length, and how still you can be... but the sweet spot is different for everyone and in different situations, your best bet is to just keep taking more photos and you'll develop your own

Grand Master

Kerm

Posted
Posted

ISO has nothing to do with how close you are to something, it's how sensitive your sensor is to light. So the less light there is you might need to bump up your ISO to make it more sensitive allowing for 'correct' exposure. An alternative to raising your ISO as I'm sure you know is either to shoot with a wider aperture (lower F value) or a slower shutter speed, both of these will allow more light to hit the sensor.

*Edit* Whoops, that was to Quick shot on the previous page.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • DWARF mini review: the world's smallest smart telescope for night and day sky captures

      By Malisk · Posted

      I think it depends on what you're looking for to do, and the time you have to spare. With my Dwarf 3, I easily spend 3-4 hour sessions; half an hour driving to an un-light polluted place, another half hour unpacking and setting up the smart scope + tripod for equatorial tracking, then 15 more minutes mucking around with settings and shooting calibration frames, spending a few hours shooting, merging with past photo sessions, etc. It's crazy how time flies and I often get home later than I expected. It's something I still need to set aside a good part of an evening to do, all in all. For one session, where you often need like four for best results when it comes to deep space objects. Even with a smart scope like Dwarf 3, regular non-astro photography is still way more approachable to people getting into photography. I find this is a time consuming niche no matter how I go about it. With practice, I can probably begin cutting time here but I think where smart scopes find their home is among people who love to shoot the night sky but don't have the spare time to go deep with the "navigator level" attunement to the night sky itself in addition to everything else. Having said this, _if_ you have even more time to spend on this hobby, it will probably be even more rewarding to do it more by hand and learn the skies and the details of how it all works.
    • Microsoft confirms a new, useful Teams' app is coming very soon

      By Malisk · Posted

      I misread the title and thought Teams itself would be redesigned. Imagine having this one as a native WinUI app.
    • Dell, HP PCs ran into endless reboot, BitLocker recovery loops but Windows 11 isn't to blame

      By hellowalkman · Posted

      Dell, HP PCs ran into endless reboot, BitLocker recovery loops but Windows 11 isn't to blame by Sayan Sen Last month Neowin reported on a major issue on Dell systems wherein a bug in its official support tool was leading to endless blue screen of death (BSOD) and restarts. Following our report, Dell officially acknowledged its SupportAssist-related crash issue, confirming that the culprit is not Microsoft's operating system but rather a faulty version of its own remediation software. In a newly published support advisory, Dell stated that version 5.5.16.0 of Dell SupportAssist Remediation and Alienware SupportAssist Remediation can trigger blue screen errors and unexpected system restarts. The company notes that the problematic component operates independently of the main SupportAssist application, meaning users should not remove the primary SupportAssist software when troubleshooting the issue. According to Dell, the crashes are linked specifically to the SupportAssist Remediation service, which is bundled with SupportAssist OS Recovery Tools, and as such it has since released an updated version, 5.5.16.1, which is said to resolve the problem. Affected users are advised to first verify whether version 5.5.16.0 is installed by checking the Installed Apps section in Windows Settings. If so, Dell recommends updating SupportAssist OS Recovery Tools through either SupportAssist's "Update Software" feature or Dell Command Update. Dell also advises users to back up important data before performing the update and to ensure systems remain connected to power throughout the installation process. If you are still having issues though make sure to report to the Dell support forum. As it turns out though Dell is not the only PC maker currently dealing with update-related headaches as HP is also facing a separate but probably equally frustrating issue involving recent Windows Secure Boot updates that were released with recent Windows 11 Patch Tuesdays. Similar to Dell, HP also put up its own support article where it explains the issue. The company says that affected devices could hit a brick wall when booting as they run into a BitLocker recovery loop after the April 2026 updates. The problem appears to affect systems wherein the new UEFI Secure Boot CA 2023 certificates fail to apply properly. As such affected users will find themselves entering their recovery key over and over again despite the system otherwise functioning normally. HP says such PCs should be updated to the latest available BIOS version and configured with the necessary Secure Boot certificates before installing Microsoft's Windows 11 Patch Tuesday updates. Systems that are already experiencing the problem may require BIOS configuration changes to restore normal boot behavior. Admins can find information regarding that in the support article here on HP's official website.
    • Ninja Theory's new Hellblade game is action-focused and set in Purgatory

      By Case_f · Posted

      Getting further away from the artistic study of mental disease that was the first game... (which never needed any sequels to begin with) But I get it, a company has to make money. And the second was at least visually impressive, if not in any other way.
    • Halo: Campaign Evolved is out next month with new prequel missions

      By mcloum · Posted

      If its the devs fault you would think Unreal would help M$ take full advantage of Unreal and work with them to fix the performance issues. Otherwise they are catching unwarranted bad press.

  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      246
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      69
    5. 5
      neufuse
      68
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!