Recommended Posts

I am surprised that something hasn't come out for the PS3, from what I understand that PS3 problems are far worse. Also put a few hours into the game and I'm loving it :D One thing that annoys me is the map at this point, I haven't figured it out yet and it's so frustrating trying to figure out where I should be heading. Hopefully put some serious time in over the weekend and my xmas break. Can't wait :D

Ya, Bethesda either did 0 game testing for the PS3, or they were OK with releasing a very broken game.

The game plays just fine for a good amount of time, but then you start to get some sort of horrible memory leak, resulting in FPS dropping to 10 or less. That was the biggest issue, besides the broken quest and such. Then they released patch 1.2, which they said would fix the issues but didn't. Instead, it just broke the dragons, broke more quest, broke resistances, and made the FPS drop not happen for about a extra 20 minutes of game play.

Everyone on PS3 is awaiting the next patch, just to see what type of improvements are there.

I had my PS3 actually over heat due from the FPS memory leak. Was fighting a backwards flying invincible dragon. By the time I got the dragon to 0 health, my FPS was at 10 or less. Shortly after, the screen froze and artifact up. I touched the back of the PS3 and it was the hottest it has even been. Since then, I haven't touched Skyrim until they fix this issue. I've read reports where people have had their PS3's just stop working completely while having the FPS issue, so I'm not about to risk that.

Thanks for those tips Soulsiphon. I think that I just need to get stuck it and it'll become easier. I've not heard anyone else complain about it so it can't be that bad.

Shakey - yeah it does seem that way right? I would have though even with the most basic of test runs they would have picked up an issue like that. I mean it's not even an isolated incident is it? Let's hope the next PS3 patch comes soon enough and then you can go back to questing.

Before I got to blackreach, during those twisty ramps, those things need guard rails. Stupid companion and dog kept falling off, had to restarts so many times from either them falling off, or deciding to rush when I do the dragon shout push.

Got fed up with the dog, told him to go home. He started slowly sulking away, so I dragon pushed his ass off the cliff and killed him.

But blackreach is huge, I had to stop exploring it and get on with quest as it was knocking on 3am, Definatly have to go back and explore/loot more, had to pass a lot of stuff

Been playing since Monday, have no idea how many hours I've put in so far. A little summary of me:

- Level 30

- Arch-Mage Dragonslayer :p

- I mainly use Conjuration Magic, typically a conjured sword (which raises my skill in One Handed weapons) and a Dremora Lord. Sod real companions/weaponary, too unreliable :D I had started with Destruction magic but it seemed to take too long to level up and become really powerful in.

- I went through most of the Thieves Guild quests except for the very last one

so I can keep the Skeleton Key. When I've raised my Lockpick skill enough to get the perk that stops picks being broken, then I'll finish the final quest.

.

Before buying the game I noticed most people went with sword and shield and argued about which armour looks better. That's also how I played Oblivion. Thought I'd be a bit different and be a mage and only wear robes. The Arch-Mages' robes are pretty useful and I've combined it with one of the priest masks so magicka recovers really quickly. My Dremora Lord friend is super powerful, and if he dies, I just spawn a new one. Love it.

Originally I thought it would be difficult for me to prevent myself glitching to high levels but now that I've put so much time into the game, I don't want to ruin the fun for myself. I can't be doing with spending hours chopping wood to make money like some do, though. I don't need a house, everything I need (i.e. a chest) is in the Arch-Mage's quarters.

Absolutely loving the game. Already have my hands on a few unique artefacts - Ring of Hircine is pretty fun. There are so many quests in my pause menu it's unreal.

I think someone mentioned a patch for the PC. The one that Llawnroc was talking about is something completely different. Though I'm guessing that it's the patch to sort out the textures?

Can anyone confirm. I'm stuck at work and won't be able to check until later on tonight.

The patch is for the Xbox and supposedly fixes everything listed here:

http://forums.bethsoft.com/index.php?/topic/1308294-update-13/

Unfortunately not had time to test everything out!!!! :D

Update 1.3 for Skyrim is now available on Steam and is being submitted to Sony and Microsoft. As soon as we have more information on the update hitting PlayStation 3 and Xbox 360, we'll let everyone know. Below are the release notes for the update:

Update 1.3 Notes (all platforms unless specified)

  • General stability improvements
  • Optimize performance for Core 2 Duo CPUs (PC)
  • Fixed Radiant Story incorrectly filling certain roles
  • Fixed magic resistances not calculating properly
  • Fixed issue with placing books on bookshelves inside player purchased homes
  • Fixed dragon animation issues with saving and loading
  • Fixed Y-look input to scale correctly with framerate

I haven't tried it out yet, still on 1.1 on Xbox. From everything I've read in the Beth forums, the fixes are working fine and nothing noticeable is broken. I'm going to go ahead and jump to 1.3 tomorrow and do a HDD install (been playing off disc due to texture issue).

I spent a few hours playing it y'day and didn't notice anything unusual, I had in installed to the HDD drive too. Think they may have sorted the issues out...for now at least.

lol, I have like 110k right now (after buying all the houses), at level 54. I really really don't need money, but some key things I did:

Level up Pickpocketing - Easy as hell to level! Move through the perks to get +100 carrying capacity.

Find the stone of The Steed - Adds +100 to your carrying capacity!

If you're a Heavy Armor user like me, get the perk that makes your armor not weigh anything when you wear it. Very helpful!

This leaves me with plenty of room to store items I come across along the way to sell. As I played, I picked up the spell Transmute, then bought all the Iron Ore I could find, as well as mined some of it up while I was out on my travels. Then, at some point when I feel like I have plenty, I just transmute the Iron Ore to Silver Ore, then from Silver Ore to Gold Ore. Smelt it into Gold Ingots, and use whatever gems I have to make wonderfully expensive jewelry. Probably one of the easiest ways to make cash really. Also unintentional leveling of Alteration magic!

Another easy way that levels your Smithing and Enchanting is (which I'm sure talked about already here) to make ONLY Iron Daggers to level your Smithing. Save them all, then enchant them all with the best enchant you have, and sell those daggers off. Remember you don't have to do it all at once, just as you go really.

Also helps if you equip the Thieves Guild Hood and Amulet of Zenithar for better prices when you go to sell your goods. I think that's a 25% difference they make there.

I guess at this point, I really should stop being a pack rat, but I can't help it hahah. I want ALL the gold! :D

my lvl 35 archer/assassin has 18 dragon souls ... but can't use them on any more shouts ? i have the first shout and the sprint shout from the grey beards what gives ?

Some spoilers;

Not doing many dungeons? There are lots of word walls around in certain dungeons, and even around in the world, for example in dragon rests (like the one up in the mountain just straight south from Riften, in some cases you get bounty quests from the Jarl/Steward to kill such a dragon too). If you continue to do quests for grey beards they will ask you to go to a specific dungeon to get a word from a wall. Personally I got about same amount of words as souls, slightly more words in fact.

If you want a super spoiler you can check a web site that has all locations and hunt for them. I wouldn't suggest that though, removes a lot the fun.

Have you found the other shouts?

Some spoilers;

Not doing many dungeons? There are lots of word walls around in certain dungeons, and even around in the world, for example in dragon rests (like the one up in the mountain just straight south from Riften, in some cases you get bounty quests from the Jarl/Steward to kill such a dragon too). If you continue to do quests for grey beards they will ask you to go to a specific dungeon to get a word from a wall. Personally I got about same amount of words as souls, slightly more words in fact.

If you want a super spoiler you can check a web site that has all locations and hunt for them. I wouldn't suggest that though, removes a lot the fun.

lots of shouts

i think i need to do more dungeons

Yeah, anything that sends you to a Nord crypt or a Dragon's head on the map is a good place to look.

Aside, I got "Reveal Aura" last night, and they say in the description that it's a "whisper", but every time I use it everyone hears me. Does it get quieter once you learn all the words?

Been running off the original release (Xbox) due to the problems with patches but decided to download the 1.3 patch that came out yesterday. Played around for about 3 hours last night and can't notice any particular glitches (except one from before I upgraded, doing a quest after the Winterhold college where there's a dispute amongst the mages in the college, 2 mages have a dispute with another which leads to a quest to retrieve a couple of staffs. Completed the quest and retrieved the staffs but it only updated one quest line and now I'm stuck with a staff that I can't put down (quest item) and the quest line won't update to let me complete it).

I must have been running low res graphics before as they certainly changed after downloading the 1.3 patch, wow. Killed a dragon and got it's soul so that patch appears to be fixed, dragons don't fly backwards or jump around so that ones fixed. Magic resistance is fixed.

I think for anybody that's on the fence with patches (as I was), the 1.3 patch (Xbox) is safe to download.

Yeah, anything that sends you to a Nord crypt or a Dragon's head on the map is a good place to look.

Aside, I got "Reveal Aura" last night, and they say in the description that it's a "whisper", but every time I use it everyone hears me. Does it get quieter once you learn all the words?

I have up to the second word of that and yes, it's much quieter. I believe the second word also lets you see undead, too. I really wish the descriptions were more uh...precise...in what the actual words did for you. That's one of the biggest issues I have with this game.

Hth are you guys getting those high levels??? I'm like level 18 and advancing quite nicely just running through content normally. I mean, I'm temporarily diverted onto some side-quests, run pretty much every dungeon I can find a quest for, kill every loose dragon that comes along, and am also very far along the MQ line, I just don't know how someone is 50ish or whatever :( Am I missing something??

Hth are you guys getting those high levels??? I'm like level 18 and advancing quite nicely just running through content normally. I mean, I'm temporarily diverted onto some side-quests, run pretty much every dungeon I can find a quest for, kill every loose dragon that comes along, and am also very far along the MQ line, I just don't know how someone is 50ish or whatever :( Am I missing something??

All I can say is if you want to be a high level it pays to play like you have adhd at times. Whenever you go to a quest objective just take your time to look around and explore along the way.

On the other hand leveling up enchanting, smithing, and alchemy (when you can afford it and don't want to gather materials yourself) will get you a lot of levels.

Hth are you guys getting those high levels??? I'm like level 18 and advancing quite nicely just running through content normally. I mean, I'm temporarily diverted onto some side-quests, run pretty much every dungeon I can find a quest for, kill every loose dragon that comes along, and am also very far along the MQ line, I just don't know how someone is 50ish or whatever :( Am I missing something??

You have to level random skills to get to the higher levels. It's actually somewhat detrimental to get to a high level too quickly, as it means you've spent time in smithing an alchemy and things like that, while your main skills might be lower than they should be.

It's all relative, but if you're doing pretty good in your main skills (one-handed/two-handed, sneak, etc), then you can "power level" smithing or enchanting or alchemy to get a few levels quickly.

All I can say is if you want to be a high level it pays to play like you have adhd at times. Whenever you go to a quest objective just take your time to look around and explore along the way.

On the other hand leveling up enchanting, smithing, and alchemy (when you can afford it and don't want to gather materials yourself) will get you a lot of levels.

Pretty much this.

Best thing to do is make Iron Daggers because of their material costs and because you can get your Smithing to 100 off them. Just buy Iron Ingots or Iron Ore whenever you can (that's what I did at least, only mined a couple times max), make all your daggers (KEEP THEM), then go enchant them. Can either buy already filled Soul Gems or buy empty ones and fill them yourself. Best recommendation is to enchant "Soul Trap" to your weapons so that you can always be filling up them Soul Gems. Enchant your daggers with the best enchant (that is, the one that'll make the cost the highest) you have and sell them.

Overall, you get Smithing up fast, Enchanting up fast, and level up like crazy without hurting your pockets much (if at all).

I'm not having the best luck with Alchemy, but I guess maybe I'm just not doing it enough? Only have it up to level 40 and I'm level 55 having maxed out a lot of my skills already. :s

This topic is now closed to further replies.
  • Posts

    • Flameshot 14.0 Final by Razvan Serea Flameshot is a free and open-source, cross-platform tool to take screenshots with many built-in features to save you time. Using Flameshot is as simple as launching, dragging the selection box to cover the area you want to capture, making annotations as needed in on-screen and saving the shot to your computer, all with a very simple and straightforward interface. Flameshot allows users to simply upload their screenshots directly to the cloud in order to easily share it with others. You can upload your image directly to Imgur with a single click and share the URL with others. In-app screenshot editing - You can choose to add an arrow mark, highlight text, blur a section (blur or pixelate an area), add a text, draw something, add a rectangular/circular shaped border, add an incrementing counter number, and add a solid color box with Flameshot's built-in editing tools. Command-line interface (CLI) - Flameshot has several commands you can use in the terminal without launching the GUI via a command line interface. The command line interface lets you script Flameshot and use it as the subject of key binds. Flameshot 14.0 release notes: This release brings major improvements to multi-monitor support, fractional scaling support, new capture workflows, and a long list of bug fixes across all platforms. Changelog: New Multi-Monitor Capture Workflow New monitor selection screen before capture for better multi-monitor and mixed-scaling support. Option to auto-capture the monitor under the cursor (X11 & Windows). Tray menu can directly select a monitor. Linux Improvements XDG Desktop Portal is now the primary screenshot method. Added legacy X11 fallback option for minimal window managers. New D-Bus capture API for scripting and automation. Windows Enhancements Global screenshot hotkeys now supported (not limited to Print Screen). New portable mode stores settings next to the executable. Clipboard now always uses PNG format for better compatibility. CLI & Platform Updates Redesigned flameshot screen command with per-monitor capture support. Added native Nix Flake support. More compact launcher UI and improved update notifications. Major Fixes Multiple Wayland stability fixes, including KDE Plasma crash fixes. Clipboard compatibility improvements for GNOME, Wayland, X11, Windows, and macOS. Fixed D-Bus hangs, capture crashes, and HiDPI region issues. Other Changes Dropped Ubuntu 20.04 (Focal) support. Updated translations and build infrastructure. Intel macOS builds are no longer provided. [full release notes] Download: Flameshot 14.0 | 18.1 MB (Open Source) Download: Flameshot Portable | 53.0 MB Links: Flameshot Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Helium Browser 0.13.4.1 by Razvan Serea Helium is a private, fast, and honest Chromium-based web browser — built for people, with love. It offers the best privacy by default, unbiased ad-blocking, and a clean experience free from bloat and noise. Proudly based on Ungoogled-Chromium, Helium removes Google’s clutter while keeping a fast, efficient development pipeline. With thoughtful touches like native !bangs and split view, Helium is a people-first, fully open-source browser that puts control back in your hands. Privacy, security, and control come first. Ads, trackers, and third-party cookies are blocked automatically, HTTPS is enforced everywhere, and all Chromium extensions work seamlessly — while Google can’t track your activity. Helium’s 13,000+ offline-ready !bangs let you jump straight to sites or AI tools like ChatGPT instantly. Open-source, people-first, and unbiased, Helium delivers a browsing experience that’s fast, secure, and free from noise, ads, and compromises. Helium Browser key features: Performance Fast, efficient, and lightweight — built on Chromium’s optimized engine. Energy-saving and consistent — stays fast over time without slowing down. No bloat — stripped of unnecessary components for maximum speed. Minimalist interface — compact, clean, and distraction-free. Customizable toolbar — hide elements you don’t need. Smooth and stable — no flicker, lag, or animation glitches. Comfort-focused experience — intuitive and unobtrusive. Privacy & Security Best privacy by default — blocks ads, trackers, phishing, and third-party cookies. Unbiased ad-blocking — powered by community filters and uBlock Origin. No telemetry or analytics — zero background web requests on first launch. Strict HTTPS enforcement — warns for insecure sites. Passkeys supported — modern authentication made simple. No built-in password manager or cloud sync — your data stays yours. Extension Compatibility Full Chromium extension support — including MV2 extensions. Anonymized Chrome Web Store requests — Google can’t track extension installs. Extended MV2 support — maintained for as long as possible. Smart Features Native !bangs — browse faster using 13,000+ offline-ready shortcuts. AI integration — use !chatgpt and others directly from the address bar. Offline functionality — bangs work without an Internet connection. Philosophy People-first design — open source, transparent, and community-driven. No ads, no noise, no bias — privacy and honesty over profit. Helium Browser 0.13.4.1 changelog: 0a4f1149 revision: bump to 4 (#1969) 4848de1f helium/core: enable the chromium screenshot feature (#1968) e0dec3f5 onboarding: integrate strings to i18n system (#1948) 417fa5bc i18n: fix newline parsing for onboarding 7a339b39 i18n: add foraged translations for onboarding 4f090cff i18n/generate: add handling for onboarding strings bfe48d58 i18n_apply: manually override parent grd logic for onboarding strings ab214e3c onboarding: bump in deps, wire up grdp afa6a059 helium/core: disable pdf infobar feature (#1965) eba585e7 helium/ui/vertical: fix new tab button alignment and icon size (#1964) 6ecfc9e0 helium/ui/tabs: fix horizontal tab hover background color (#1963) 3db87dc0 helium/ui/tabs: fix new tab button hover/press colors (#1962) 6bbdcc3e helium/ui: improve tab group UI in all layouts (#1961) 53deb314 helium/ui/tabs: enable tab group hover cards e93aece7 helium/ui/vertical: fix tab group appearance, prevent line overlap 629f5495 helium/ui/tabs: restore solid group header colors, enable new colors 961c962e helium/ui/tabs: move horiz tab group underline to bottom, make it thick c96deab6 merge: update to chromium 149.0.7827.155 (#1959) 36db56b4 i18n: update source.gen.json 5ce006ae patches: refresh for chromium 149.0.7827.155 b4c1ea62 merge: update ungoogled-chromium to 149.0.7827.155 4e5e8671 Update to Chromium 149.0.7827.155 08a3e7da helium/ui/layout: disable mute on collapsed vertical tabs (#1778) a0a5bbaf helium/core: simplify context menu and prevent huge widths (#1951) c4732aac devutils/i18n: add forage command (#1944) 11d16986 devutils/i18n: add an option to translate using local CLI tools (#1942) d820c3a2 i18n/prompt: tighten translation rules to prevent common errors (#1940) cf827007 Update to Chromium 149.0.7827.114 6e3d5164 Update to Chromium 149.0.7827.102 Download: Helium 64-bit | Portable 64-bit |~100.0 MB (Open Source) Download: Helium ARM64 | Portable ARM64 Links: Helium Home Page | macOS | Linux | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Glow 26.10 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.10 changelog: New Features The bootstrapping algorithm has been completely redesigned. The software can now launch directly without requiring TS Preloader. As part of this change, the startup splash screen displayed during initialization has been removed. In addition, spikes in CPU usage have been eliminated, resulting in a more stable architecture with significantly lower memory consumption. The Microsoft Office detection infrastructure within the Operating System section has been enhanced. Additional detection support has been added for Office C2R (Click-to-Run) installations. Furthermore, the license status evaluation system has been improved, and the priority order has been revised as follows: Licensed > Grace Period > Other (NOTIFICATIONS, EVALUATION, etc.). Glow now includes preliminary support for Wi-Fi 8 technology, allowing more detailed information to be displayed for Wi-Fi 8-compatible network adapters. Glow now provides full support for Bluetooth 6.2. Adapters supporting Bluetooth 6.2 can be analyzed in greater detail and with improved accuracy. The disk distribution view in the Disk section has been modernized, replacing the traditional table layout with a new 2×2 card-based design. The TS Custom Controls module has been updated to v26.7. Thanks to the new custom controls, all Türkaysoft applications now offer a more modern and consistent user interface aligned with Windows 11 design standards. Bug Fixes Potential line-ending handling issues in the Office detection code within the Operating System section have been resolved. Additionally, the output format has been standardized to UTF-8 to prevent character encoding issues and ensure consistent data processing. Several stability and file management issues within the Debugging infrastructure have been addressed. Problems that prevented new log files from being created after Debugging was disabled, as well as issues causing debug records to be lost, have been fixed. File deletion and reaccess issues that occurred after file locks were released have also been resolved. In addition, a bug that caused newly recreated log files to remain locked after deletion has been eliminated. Unnecessary blank lines within debug logs and the extra empty line that could appear at the end of log files have also been corrected. A shortcut key conflict caused by assigning identical hotkeys to both the DNS Test Tool and the Donation page has been fixed. The DNS Test Tool can now be accessed using CTRL + Shift + D, while the Donation page is available via CTRL + Alt + D. Changes The service responsible for providing the Public IP Address and Internet Service Provider information in the Network section has been updated to use the ipinfo.io infrastructure. This change improves the accuracy and consistency of the displayed data. (No external requests are made while Hiding Mode is enabled.) Some terms in the Dutch and Korean language files have been updated to make them clearer and more user-friendly. [TS Updater] Before the update process begins, users are now prompted to choose whether they would like to view the release notes. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.10 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      582
    2. 2
      +Edouard
      183
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      73
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!