Good DSLR for a beginner


Recommended Posts

Hello,

I am looking to take a camera course, a requirement I've noticed is a DSLR that has RAW capabilities.

Could anyone advise me what a good camera for a beginner would be? I'm looking to spend between ?150 - ?300.

There are a few on Amazon that take my eye, but I'm not sure whats best. Ideally I would like a LCD and some automatic settings to aid me.

Many thanks.

Link to comment
https://www.neowin.net/forum/topic/964596-good-dslr-for-a-beginner/
Share on other sites

All dSLRS have Raw capabilities ( olympus cameras I think using their own raw format, as does nikon too )

With that budget any entry level dSLR from Canikon duopoly would be alright ( Canon or Nikon). I would get the cheapest one and then later on, buy according to your needs.

This may sound biased and all of you may disagree with me, but I have a Sony A450 and that's not bad for a beginner, i'm just starting out with SLRs as well, as the interface explains what each function does clearly. The only issue is metering issues, something that's easily corrected in Adobe Bridge if you shot in RAW.

BTW all SLRs have their own RAW format Sony's being ARW, Nikon's is NRW, Canon use CRW and Olympus use RAW.

Oh I agree, Sony makes good entry level dSLRS however, not sure about image quality on those, as i've never owned, never been interested in one. ( yet :p) Though maybe you can state why you decided to go with sony, over other brand when making your purchase, to give the OP some intel :)

Oh I agree, Sony makes good entry level dSLRS however, not sure about image quality on those, as i've never owned, never been interested in one. ( yet :p) Though maybe you can state why you decided to go with sony, over other brand when making your purchase, to give the OP some intel :)

np, I'll try and keep it short!!!

I was looking at the Canon EOS450D, sadly discontinued, and spoke to the guys in the shop and they recommended the Sony A450 to me.

Instead of a 12.2MP sensor it has a 14MP APS-C CMOS sensor, support for both SD and MS cards which has a switch to choose which one to record the images to, support for A-Mount Konica Monolta Lenses, seeing as the camera division of Minolta was sold off to Sony this isn't surprising.

The A450 is actually a midrange camera but surprisingly easy to use, i've managed to get really decent images out of it as well and i'll post some on here, if I can, to give an idea of image quality (Looks like it'll be a link to Skydrive or a similar website as the RAW files are 7MB+).

OP, you need to remember that a Megapixel rating isn't what makes a great picture, that's up to the photographer. I've got decent pictures, some approaching SLR quality, out of a 5MP cameraphone. What you need to look for is one that suits your needs as well as being easy for you to use. That's a very subjective issue and we can only give you our opinions on the Cameras we've used, I would go into a Camera store having chosen at least three models from different manufacturers and try them out before buying. I would also consider going to a smaller shop to buy as larger shops will push you towards models that make the most money.

Moved to Digital Camera Lab

I started off with a 400D and quickly found it limiting. However the lowest range DSLR canon do atm is the 550D. It seems like a good place to start, i haven't tried one personally but it has strong stats. If your feeling adventurous move up the scale a bit to the 60D.

OP, you need to remember that a Megapixel rating isn't what makes a great picture, that's up to the photographer. I've got decent pictures, some approaching SLR quality, out of a 5MP cameraphone. What you need to look for is one that suits your needs as well as being easy for you to use. That's a very subjective issue and we can only give you our opinions on the Cameras we've used, I would go into a Camera store having chosen at least three models from different manufacturers and try them out before buying. I would also consider going to a smaller shop to buy as larger shops will push you towards models that make the most money.

Best advice. I for one went with nikon, because Canon (450d) felt like a toy compared to the Nikon D50 back in the day (when Sony hadn't bought minolta yet). Then I bought a D5000 because ATM it had better higher ISO capabilities than the canon equivalent ( 500d I think...) PLUS I had some nikon glass already so...

Why not post a couple of jpegs in our digital gallery :p

Moved to Digital Camera Lab

I started off with a 400D and quickly found it limiting. However the lowest range DSLR canon do atm is the 550D. It seems like a good place to start, i haven't tried one personally but it has strong stats. If your feeling adventurous move up the scale a bit to the 60D.

Yeah... I went with a "midrange" D5000 and man I regret it, the more you learn and shoot, the more you know how to use the features and start to notice or the lack off, as an example, the D5000 doesn't have a wireless commander mode for external flash which I thought I would never need, boy was I wrong...

Moved to Digital Camera Lab

I started off with a 400D and quickly found it limiting. However the lowest range DSLR canon do atm is the 550D. It seems like a good place to start, i haven't tried one personally but it has strong stats. If your feeling adventurous move up the scale a bit to the 60D.

The 550D (T2i) or the 500D (T1i) are both rated highly for entry level cameras. They're probably on the higher end of the entry level, so you can't go wrong for the money. I love my T2i as I traded up from an Xti. Whatever camera you get you'll need to back it up with a nice lens. I've seen excellent cameras held back by poor lenses, and poor cameras excel with good lenses.

Good luck!

Best advice. I for one went with nikon, because Canon (450d) felt like a toy compared to the Nikon D50 back in the day (when Sony hadn't bought minolta yet). Then I bought a D5000 because ATM it had better higher ISO capabilities than the canon equivalent ( 500d I think...) PLUS I had some nikon glass already so...

Why not post a couple of jpegs in our digital gallery :p

I'll certainly post some images, I don't have them here, i'm at home and the external drive is at my term time address.

I read Digital Camera Magazine and have learned a lot from the tutorials within it. The reviews have also been helpful in finding the right extra kit to buy as well.

This website is also helpful Warehouse Express. They charge for delivery but it is next day, most items have reviews and you can also chat to the staff for help, I bought my Tamrac Expedition 3 Camera Bag from them.

The only thing I didn't like about the EOS450D is that it has the IS, Image Stablisation for the benefit of the OP, built into the lens. This means that only Canon and third party lenses that are built specifically for Canon cameras will have IS, it also makes the lenses more expensive than ones for other cameras.

OP, I would also look for a camera with a kit lens, it'll cost more initially but it means that you won't have to spend extra on a lens.

I would look into buying a body only, then getting a 35 or 50mm lens (preferably 35). If you're completely new to photography, you shouldn't be learning on a zoom lens. Nor should you be using autofocus. Also, make sure that the ISO, f-stop, and shutter speed are all easily accessible in manual mode.

The nice thing about learning how to shoot on film was that it was cheap to get a fully manual 35mm camera that took great, high-resolution photos, and only had enough dials to take a picture. All digital cameras unfortunately load up the number of on camera features, and the entry level ones often rely too heavily on face-finding features.

I would look into buying a body only, then getting a 35 or 50mm lens (preferably 35). If you're completely new to photography, you shouldn't be learning on a zoom lens. Nor should you be using autofocus. Also, make sure that the ISO, f-stop, and shutter speed are all easily accessible in manual mode.

The nice thing about learning how to shoot on film was that it was cheap to get a fully manual 35mm camera that took great, high-resolution photos, and only had enough dials to take a picture. All digital cameras unfortunately load up the number of on camera features, and the entry level ones often rely too heavily on face-finding features.

This isn't bad advice but keep in mind the OPs budget of ?150 - ?300, that's not really enough to get a top entry level camera and a separate lens.

Everyone has to learn how to use a zoom lens at some point why not now, I did!!!

I also think that OP should leave some settings on Auto for the moment, until they are ready to move onto manual i.e. when OP starts the camera course.

This isn't bad advice but keep in mind the OPs budget of ?150 - ?300, that's not really enough to get a top entry level camera and a separate lens.

Everyone has to learn how to use a zoom lens at some point why not now, I did!!!

I also think that OP should leave some settings on Auto for the moment, until they are ready to move onto manual i.e. when OP starts the camera course.

Well, you can get a kit lens then sell it. Everyone sells a cheap 50mm. Zoom lenses, which I use extensively, can be detrimental to beginners trying to get the hang of composition. They also won't have the wide aperture of an inexpensive prime, which brings up the issues of hunting out good light sources and limits your composition some.

As for auto settings, I'm against learning with them. Remember, everyone used to know how to shoot "full-manual" (albeit your iso was pre-determined). It's only recently, and in many respects because digital cameras have too many settings for too few buttons, that auto and semi-auto modes came about. If there's really a need to start off with some assistance, then aperture priority is probably the best semi-auto mode to learn in.

Just my two cents. Learn everything, then decide what you're ok with letting the camera control.

Well, you can get a kit lens then sell it. Everyone sells a cheap 50mm. Zoom lenses, which I use extensively, can be detrimental to beginners trying to get the hang of composition. They also won't have the wide aperture of an inexpensive prime, which brings up the issues of hunting out good light sources and limits your composition some.

As for auto settings, I'm against learning with them. Remember, everyone used to know how to shoot "full-manual" (albeit your iso was pre-determined). It's only recently, and in many respects because digital cameras have too many settings for too few buttons, that auto and semi-auto modes came about. If there's really a need to start off with some assistance, then aperture priority is probably the best semi-auto mode to learn in.

Just my two cents. Learn everything, then decide what you're ok with letting the camera control.

I would certainly agree, I tend to shoot in Aperture priority mode but started with auto, I do change from the current settings when needed though, it's something you learn really, isn't it. I'm just trying to find a new lens though as the kit lens I got with it is limiting (18-55mm btw), which isn't easy.

I'm guessing you started with a 35mm fully manual SLR?

I'm guessing you started with a 35mm fully manual SLR?

Yup, with film. Auto cameras were available (and some digital cameras existed), but we weren't allowed to use them in class.

Also had to shoot in black and white, which is a good way to learn these days, although not nearly as limiting as it was with film.

This is within your budget: http://www.amazon.co...93753881&sr=1-9

As a Sony user, I can say that their entry range cameras are very decent, the A2x0 series does not shine at higher ISO settings but is very good at lower settings. Also you get in-camera IS for ALL lenses, including fast primes. The only consideration for your course is if you're going to be using external studio lighting you'll need an adapter to use them (5 pounds shipped on ebay tops) since Sony uses a different (read: more modern) hotshoe design.

Also, the big advantage to Canon/Nikon is that a lot of people are likely to have those in your class so there is a chance you could borrow some gear you might need.

These are the other options available from the other 3 manufacturers (Olympus only does 4/3s, which is not as good an option IMO).

http://www.amazon.co...3753924&sr=1-30 (From what I've read, this is the best one in low light, but the Pentax system is slightly more limited than the Sony system)

http://www.amazon.co...93753881&sr=1-3 (This is the worst of the bunch since it is a very ancient design that, for some reason, Canon still sells plus it comes with a non-IS lens)

http://www.amazon.co...93753992&sr=1-2 (the D3000 was only like 15 pounds less, so I skipped it as the D5000 is vastly superior, but it costs significantly more, at this price point you're competing against different cameras from Sony and Canon).

Well, you can get a kit lens then sell it. Everyone sells a cheap 50mm. Zoom lenses, which I use extensively, can be detrimental to beginners trying to get the hang of composition. They also won't have the wide aperture of an inexpensive prime, which brings up the issues of hunting out good light sources and limits your composition some.

As for auto settings, I'm against learning with them. Remember, everyone used to know how to shoot "full-manual" (albeit your iso was pre-determined). It's only recently, and in many respects because digital cameras have too many settings for too few buttons, that auto and semi-auto modes came about. If there's really a need to start off with some assistance, then aperture priority is probably the best semi-auto mode to learn in.

Just my two cents. Learn everything, then decide what you're ok with letting the camera control.

I wouldn't say it was *that* recent - my thirty year old A-1 has Av/Tv/Auto on it :p. Damn thing's light meter is a hell of a lot better than my 40D's as well :(

I'm not sure if this is a dumb question, but do most, if not all, DSLR camera shoot video also?

For example, I'm considering: http://www.amazon.co.uk/Sony-DSLRA290L-Digital-Camera-SAL1855/dp/B003S9X6U6/ref=sr_1_9?s=electronics&ie=UTF8&qid=1293753881&sr=1-9

I'm not sure if this is a dumb question, but do most, if not all, DSLR camera shoot video also?

For example, I'm considering: http://www.amazon.co.uk/Sony-DSLRA290L-Digital-Camera-SAL1855/dp/B003S9X6U6/ref=sr_1_9?s=electronics&ie=UTF8&qid=1293753881&sr=1-9

Most newer dslrs shoot video yes but I would never recommend getting one on the strength of its video shooting. Pictures are what they're for and what they do best - if you want video get a camcorder.

The Nikon d40 is a fantastic beginners camera. Also have a look for a second hand Nikon D5000 - brilliant camera.

i have the nikon D3000 dslr....it is a great camera. it takes some beautiful shots. before we bought it. some of the local professional camera shops around and most professional photog mags said the the d3000 was the best entry level dslr on the market at the time.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.3 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.3 changelog: Fixes issues with MP4 files with more than 8 channels Fixes incorrect VBR detection for some CBR MP3 files Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      144
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      75
  • Tell a friend

    Love Neowin? Tell a friend!