Recommended Posts

So I will try to find something to fix this (although it doesn't really annoy me).

Leave it the way it is. It looks fine. You don't have to have feedback when something is highlighted. I used to do that with previous win versions - highlight color and 3d object color were the same. You get the ballon tips thingies as enough feedback for those who want it (sorry, I just woke up ;)).

well, like dazzla said, the icons are far from complete anywhere online, but i was working on a iptheme this morning, and had to create a bunch of icons for it, i might continue with it, might not, i have a LOT of folders and stuff to create for the damn thing, but we will see...

Schmoove, I know you're all for IP, but is it worth the investment? I tried SD software like 3 years ago and hated it... but then again, I haven't played with a shell32.dll yet, so I guess alt way's of changing icons (aside from manually) are welcome. Any issues from you guys using IP? If you can get this thing done, I think I might have to break down and give it a whirl - since everything else with this theme (and additional skins) rocks.

The thing with IP is that it doesn't change every single icon ofcourse like a Shell32.dll can do.

There are not enough icons to compile a decent Shell32.dll I think, even putting together an IP theme is a bitch.

Well I'm nearly finished with it and it is looking good I think.

Personally I prefer something like IP or IconPhile instead of a shell32.dll. It is easier to switch between themes that way.

Still waiting on Jimmac's permission, but if you'ed like a teaser, there's a screenshot on my site under the skinz section. :)

http://www.vidarbox.net

offtopic: you are using the same forumskin as i, i really need to work on a new one so it isn't so generic, you are the first site i have seen to use the same one, although i am sure there are lots more

@schmoove: Is the Ximian set near the completeness of Korilla or BlueCurve or are you having to create additional icons for the XP-varient of the set?

@vidar: *drool* I hope hope hope Jimmac gets back to you on the permissions. That is looking TIGHT! And that should be compatible with XMMS as well, so I should be able to use that on the linux side of my box! :D :hop: :hop: :hop:

offtopic: I went ahead and nabbed the 2.12a Public release of IP. It seems pretty good/stable - a helluva lot better than a couple years ago for sure. I loaded the Korilla set as a test (I've heard many speak of the completeness that set has). It seems to be pretty decent. I guess, as you said, it's easier that playing with DLL's and I can live with some change (if not a complete one), since I've gotten sick of the default icon set. What's the different between the public and paid-for versions of IP? anything?

@schmoove: Is the Ximian set near the completeness of Korilla or BlueCurve or are you having to create additional icons for the XP-varient of the set?

@vidar: *drool* I hope hope hope Jimmac gets back to you on the permissions. That is looking TIGHT! And that should be compatible with XMMS as well, so I should be able to use that on the linux side of my box! :D :hop: :hop: :hop:

offtopic: I went ahead and nabbed the 2.12a Public release of IP. It seems pretty good/stable - a helluva lot better than a couple years ago for sure. I loaded the Korilla set as a test (I've heard many speak of the completeness that set has). It seems to be pretty decent. I guess, as you said, it's easier that playing with DLL's and I can live with some change (if not a complete one), since I've gotten sick of the default icon set. What's the different between the public and paid-for versions of IP? anything?

The paid version doesn't have the nag-screen.

(hint, eMule has the latest)

My BlueCurve IP package was 100% complete. I will not release the Ximian set if it is not 100% complete AND looking good. Well I'm nearing completion, only have to make a couple of additional folders, the rest is done (AND looking good).

@Vidar: it is GPL so technically you can release it as long as you credit Jimmac. Though asking him for permission is the decent way to go. I'd say wait a week and if he doesn't respond just release it. Then if he has problems with it afterward you can always work something out.

My BlueCurve IP package was 100% complete. I will not release the Ximian set if it is not 100% complete AND looking good. Well I'm nearing completion, only have to make a couple of additional folders, the rest is done (AND looking good).

I hopped over to your BlueCurve set - It fits pretty well with Ximian - and I'm amazed! :D

Just a thought - you might want to link, on the frontpage along with the Y'z and XMMS skins, links to the WMP and Trillian Pro skins for any late adapters (it's amazing what I think of when I've been awake for less than 10 minutes).

Hrm. I don't know what to say. I reuploaded the file, downloaded it myself. Works fine - possibly a corrupt wsz/zip?

The scrollbars fixed. The grabber isn't 100% accurate as I can't put the full :-:-:-: on there. Could only fit a -:-:-:- .

Edited by Vidar

Skin works here :) Very nice, blends in more than the MacOSXGraphite skin I was using before :)

A few suggestions for a future version though:

- Could you make a title for the playlist window, like in the main window (ie, playlist centered)?

- An icon of some sorts where the Winamp lighting bolt normally is (I click there to get to the media library)

- A different selection color for the media library window (it makes it impossible to read the selection on my machine, see attachment)

I couldn't reckognize the font on the main window, so I didn't add the title - plus, there isn't a title on the original XMMS skin.

Hrm. It shows up blue on my system (see attachment). Try redownloading. If it doesn't help, or if others are having this problem, let me know. I'll delete and make a whole new zip. Don't know why its being weird like that :(

Will fix, its merely a matter of coloring a single pixel on the map.

As to the icon, I was thinking that to.. but there isn't one on the XMMS skin so I didn't include one. Maybe the Ximian monkey like my Gorilla skin?

post-36-1063485137.jpg

Sorry Schmoove. I use WInamp 2.91 (as .95 isn't final yet). I'm assuming its looking at the wrong pixel in genex.bmp. I've deleted the file off the server and created a whole new zip (35.9KB not 35.6KB) which hopefully will remove the error. The only other thing I can think it might be is if you are using a lower color depth (16bit rather than 32?) and its substituting the color for something lower.

I've attached the genex as a "patch/test". If *it* looks green, then I know where our problem lies. If it looks blue -- its a programming bug in .95.

post-36-1063499200.jpg

I'm using 2.95 as well so it's probably a difference in that version :( I'm using 32bit color here.

I downloaded it again from your site, and now instead of just a green bar, it's a blue bar now.. So it's slightly better. :p Perhaps how Winamp 2.95 reads the font color has changed also (so instead of being white, it shows up as blue like the bar)?

Schmoove: love the new color schemes :)

Nice color additions Schmoove.

Shanemca - Try this. Open the Genex.bmp. The line with the singular pixels, try filling them in one at a time with white, putting the genex back in the zip (wsz = zip disguised) and see which pixel .95 is using for the font. I have .91 installed so I can't do it myself and get the result. Heh.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Movavi Video Editor Plus 26.18.0 by Razvan Serea With Movavi Video Editor Plus, you can either enhance your video files with two or three simple steps, or turn them into something completely new. Create your own movies using multiple filters, transitions, and special effects: show multiple videos on one screen with the Picture in picture effect or change the background with the Chroma Key effect, imitate the camera zoom or make your video look like an old-style movie. Adjust video parameters such as brightness, contrast and colors. Stabilize shaky footage, improve video quality and remove defects. Create video presentations, tutorials or educational videos: add titles and record your own narration to create a video with voiceover. Import video from any source: TV-tuner, webcam, camcorder, or VHS. Drop multiple media files onto a timeline and let your imagination do the rest! Features at a glance: Video and audio editing on a timeline Edit, enhance videos Add background music Apply titles and effects Image quality improvement Hollywood-worthy effects High-grade titles and fades Digitize VHS tapes, record video from TV tuners Stabilize any shaky sections Support for a wide range of formats Prepare your videos for uploading to YouTube, Facebook, Vimeo, or any other website New in Movavi Video Editor 2026: 30+ fresh subtitle styles. Upgrade your automatic captions with new designs. Customize your text in the Styles tab with a single click. Optional advanced settings are also available in the dedicated Design tab. Subtitles in English – instantly! Translate auto-subtitles into English with a click – no dictionaries or online services needed. Once translated, configure and fine-tune the subtitles using the standard editing tools. 40+ adjustable effects. Enhance your videos in a click with new realistic effects – from dust particles and light leaks to retro-style and VHS. Every effect is fully customizable – so it will fit any clip perfectly and bring an extra spark to your edits. Ultra-fast playback. Show more in less time with video speed control of up to 100x. Perfect for epic time-lapses, long process recaps, or whenever you want to add some extra energy to your content. Magnetic zones are marked with dots, and the 1x value is indicated by a vertical line. Silence removal – in a click. Cut out unwanted pauses automatically or fine-tune the pause length and volume threshold yourself. Skip the tedious cleanup and make your videos more dynamic. Fast effect copying. Effortlessly duplicate any effect from one video to another: click Clip effects in the dropdown menu and proceed to copy or paste. Movavi Video Editor Plus 26.18.0 changes: This version includes small improvements for better editing. Download: Movavi Video Editor Plus 26.18.0 | 2.7 MB (Shareware) View: Movavi Video Editor Plus Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • JBL BAR 800 5.1.2 Dolby Atmos soundbar is an amazing deal today by Sayan Sen This Amazon Prime Day 2026 sales so far we have had a couple of nice deals related to sound and audio. First we have the Sennheiser HD 600 at its lowest ever price of just $225. Next we also have the Beats Studio Pro at its lowest price ever at just $150. However perhaps you prefer your gear to sound great on a larger scale, like throughout the room. In that case an all-in-one soundbar system can help and currently JBL's BAR 800 is a great deal for sure as it's up for grabs at just $600 (purchase link under the specs table down below). One thing that should be appreciated a lot about these JBL soundbars is their spec sheet and the frequency response data it provides. The firm is honest about it as JBL confirms the subwoofer is able to go down to 35 Hz at -6dB or F6. This means it should be covering 40Hz and up very well, where most of the bass lies. You miss out on a lot of sub-bass but that is to be expected given the price point and the subwoofer driver size. Speaking of which, it is a 10-inch driver and promises a max output power of 300 watts at 1% THD (total harmonic distortion). JBL also claims the system will provide you with a "True Dolby Atmos" experience. The surround speakers are wireless and battery-powered which means setting them up should be really convenient. The technical specs of the JBL BAR 800 are given in the table below: Specification Value Channel Configuration 5.1.2-channel soundbar system Dolby Atmos Yes, with 2 up-firing drivers Total System Power Output 720 W Soundbar Power Output 340 W Surround Speaker Power Output 2 × 40 W Subwoofer Power Output 300 W Soundbar Drivers 3 × 46×90 mm racetrack drivers, 3 × 20 mm tweeters, 2 × 70 mm up-firing full-range drivers Surround Speaker Drivers 1 × 46×90 mm racetrack driver (each speaker) Subwoofer Driver 10-inch (260 mm) wireless subwoofer Frequency Response 35 Hz – 20 kHz (-6 dB) Audio Inputs Optical, Bluetooth, Chromecast built-in, AirPlay, Alexa Multi-Room Music (MRM), USB* HDMI Inputs 1 HDMI video input HDMI Output 1 HDMI eARC output HDCP Version 2.3 HDR Pass-Through HDR10, Dolby Vision Bluetooth Version 5.0 Wi-Fi Version 6, 6E Streaming Services Chromecast built-in, Apple AirPlay, Alexa MRM Get it at the link below: JBL Bar 800-5.1.2-Channel Dolby Atmos soundbar with Detachable Surround Speakers (Black): $599.85 (Sold and Shipped by Amazon US with Prime) Prime subscription can be cancelled within three business days. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Microsoft releases PowerToys v0.100.1, fixes a bug that made remapped keys misbehave by Ivan Jenic Microsoft just released PowerToys v0.100.1, a patch update that addresses several stability and behavior issues found in v0.100.0. The v0.100.0 patch was a significant update for PowerToys, as it introduced all sorts of new features and additions, such as a rebuilt Shortcut Guide, a Command Palette Extension Gallery, webcam overlay support in ZoomIt, and more. However, the v0.100.0 version also introduced some bugs and stability issues. And now, Microsoft is addressing these issues in the new patch. The most impactful fix in this release perhaps is in Keyboard Manager, where remapped modifier keys were being delivered as system-key events, causing unexpected behavior in apps. The clearest example of this was Alt-to-Backspace remaps, deleting whole words instead of a single character. So, if you thought there was an issue with your keyboard, Microsoft just confirmed that it was PowerToys. Beyond the Keyboard Manager fix, v0.100.1 also addresses several other issues. It fixes a bug with Power Display that was preventing monitors from waking from standby correctly. Additionally, the new update patches Quick Access crashes on launch, and resolves a Shortcut Guide crash that occurred when switching between sidebar sections. Here’s the full changelog: Color Picker Fixed a bug where the main Color Picker window could appear inside the zoomed-in picker view Command Palette Fixed Run history initialization in AOT builds Fixed a bug where the Performance Monitor dock item could show ??? after restart Fixed the Hibernate command using the Sleep icon Limited the "pin to dock" dialog to displays where the dock is enabled Keyboard Manager Fixed modifier keys remapped to non-modifier keys being delivered as system-key events, which caused unexpected behavior in apps such as Alt-to-Backspace deleting whole words Power Display Fixed a bug where selecting On in the monitor power-state control did not wake a monitor from standby Fixed built-in display detection and brightness control on dual-GPU laptops where the internal panel is driven by the discrete GPU PowerToys Run Fixed VS Code Workspaces discovery after VS Code moved recently opened workspace data to shared storage Quick Access Fixed Quick Access flyout crashes caused by unhandled XAML exceptions during launch or page navigation Shortcut Guide Fixed a crash when navigating between Shortcut Guide sidebar sections Fixed number-key rendering in shortcut manifests and added a Postman shortcut manifest Updated bundled shortcut manifests to use the literal number-key token so number keys render correctly across apps ZoomIt Fixed a race condition in audio initialization for ZoomIt video recording You can download PowerToys v0.100.1 from the official GitHub releases page.
    • OBS Studio 32.2.0 Beta 2 by Razvan Serea OBS Studio is software designed for capturing, compositing, encoding, recording, and streaming video content, efficiently. It is the re-write of the widely used Open Broadcaster Software, to allow even more features and multi-platform support. OBS Studio supports multiple sources, including media files, games, web pages, application windows, webcams, your desktop, microphone and more. OBS Studio Features: High performance real time video/audio capturing and mixing, with unlimited scenes you can switch between seamlessly via custom transitions. Live streaming to Twitch, YouTube, Periscope, Mixer, GoodGame, DailyMotion, Hitbox, VK and any other RTMP server Filters for video sources such as image masking, color correction, chroma/color keying, and more. x264, H.264 and AAC for your live streams and video recordings Intel Quick Sync Video (QSV) and NVIDIA NVENC support Intuitive audio mixer with per-source filters such as noise gate, noise suppression, and gain. Take full control with VST plugin support. GPU-based game capture for high performance game streaming Unlimited number of scenes and sources Number of different and customizable transitions for when you switch between scenes Hotkeys for almost any action such as start or stop your stream or recording, push-to-talk, fast mute of any audio source, show or hide any video source, switch between scenes,and much more Live preview of any changes on your scenes and sources using Studio Mode before pushing them to your stream where your viewers will see those changes DirectShow capture device support (webcams, capture cards, etc) Powerful and easy to use configuration options. Add new Sources, duplicate existing ones, and adjust their properties effortlessly. Streamlined Settings panel for quickly configuring your broadcasts and recordings. Switch between different profiles with ease. Light and dark themes available to fit your environment. …and many other features. For free. At all. OBS Studio 32.2.0 Beta 2 changelog: Beta 2 Changes Fixed a CI deployment issue. There are no application changes since Beta 1. 32.2 New Features Replaced add source dropdown with new dialog [Warchamp7] Improved FPS selector UX [jcm93] Added missing file support for filters [exeldro] Added ability for plugins to set custom icons for new source types [cg2121] Included .webp files when adding a directory to Image Slide Show source [TarunCore] Added copy paste functions to frontend API [exeldro] Added filter to compose SDR into HDR [jpark37] Added delete as a hotkey to delete sources on macOS [PatTheMav] Added dynamic bitrate support to multitrack video [lexano-ivs] 32.2 Changes Forced Intel-based installations to update to Apple Silicon version on macOS [PatTheMav] This change means that OBS Studio versions built for Intel-based Macs but running on Apple Silicon Macs will automatically update to OBS Studio built for Apple Silicon Macs. If an installation was using third-party plugins, those plugins will no longer load until replaced with Apple Silicon versions. Fixed audio mixer state getting out of sync when changing settings via websockets or plugins [Warchamp7] Added theming for checked QToolButtons [glikely] Improved OpenGL performance slightly on low-end machines [kkartaltepe] Set minimum size for color source to 1 pixel [exeldro] Added minimum width to spinboxes [Warchamp7] Disallowed overwriting the crash handler [sebastian-s-beckmann] Applied process mitigation policies for Windows [notr1ch] Adjusted description of multitrack video [jhnbwrs] Changed new capture devices to use fallback frame rate by default [PatTheMav] Improved DLL loading behavior on Windows [notr1ch] Limited multitrack video config to Custom service [PatTheMav] 32.2 Bug Fixes Fixed OAuth and dock state save corruption [PatTheMav] Fixed group bounds not resizing when removing items [howellrl] Fixed canvas mixes not being restored after video reset [dsaedtler] Fixed some erroneous crashes during shutdown [Warchamp7] Fixed display capture sometimes capturing black after a duplicator failure [ThrowTop] Fixed color of controls dock output buttons in System theme [shiina424] Fixed virtual camera reset failures [stephematician] Fixed potential crash when user discards changes in the settings window [suogesi] Fixed incorrect return value in virtualcam filter [xtfo] Fixed source toolbar buttons not working after dragging a source into a group [Warchamp7] Fixed properties hint icon spacing [Warchamp7] Fixed potential crash when a video device reconnects on macOS [jcm93] Fixed an issue where PipeWire could fail on NVIDIA GPUs [hoshinolina] Fixed obs_canvas_get_video_info returning incorrect framerate [dsaedtler] 32.2 Deprecations Deprecated obs_properties_add_button [sebastian-s-beckmann] Download: OBS Studio 32.2.0 Beta 2 | Portable | ARM64 | ~200.0 MB (Open Source) View: OBS Studio Homepage | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Is a fast food restaurant a good metric to compare against?
  • Recent Achievements

    • One Year In
      OHI Accounting earned a badge
      One Year In
    • First Post
      Almohandis earned a badge
      First Post
    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      474
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      122
    4. 4
      Michael Scrip
      83
    5. 5
      Xenon
      72
  • Tell a friend

    Love Neowin? Tell a friend!