D90 and D500 owners look here


Recommended Posts

Good deal, thanks for the heads up!

2 questions though.

1, what will this change?

2, how do I install it? :p

1. I am not ENTIRELY sure... it's supposed to help with distortion somehow... it was just released yesterday so I am going to wait a week to see what people on the web say!!

2. follow this: http://nikonimglib.com/dcdata/manual/En/lensprofile_win_en_ABF.html

Edit: I did install it myself just 10 minutes ago, but I haven't seen any differences, but I only shot like two pics in my bedroom....

here is a quote I found: "The Distortion Control Data firmware upgrade is available for Nikon D90 and D5000 cameras only. This is used to correct barrel and pincushion distortion during shooting and editing.”

I was hoping for a significant update... but I guess there won't ever be one as the D90 is almost phased out.... although idk what they could possibly improve over a firmware update :p

Whaaaaaat?! It better not! I just got mine a few months ago. :(

... lol what difference does it make if it's "phased out" or not? :p I didn't think it was a big deal... doesn't that just mean there is a replacement and you can no longer buy it?

You already have one, so who cares if its gone? :p

Isn't the D7000 it's replacement? Which means that, since it's replacement is out it should be discontinued shortly?

Edit: I guess technically the D7000 didn't replace it seeing as there is still three cameras in the Advanced category... But it's almost at the three year mark, so it will probably be replaced this coming August

ZOMG yet they can't upgrade the video at all :/

Whaaaaaat?! It better not! I just got mine a few months ago. :(

Way to pay attention to product life cycles... lol D90's been around since mid 2008.

And what remus said, who cares if you like it? I've had it since launch and I'm still fairly happy w/ it :)

ZOMG yet they can't upgrade the video at all :/

The whole "rolling stutter" thing I read way back when that it was HIGHLY unlikely (if even possible) that they'd upgrade the video... that's one of the downsides to getting the first DSLR that supported "HD" video, I didn't buy it for that anyway so doesn't bother me TOO much, would be nice though, as I have taken a few short clips here and there

Edit: I guess technically the D7000 didn't replace it seeing as there is still three cameras in the Advanced category... But it's almost at the three year mark, so it will probably be replaced this coming August

Good things dont get outdated :D

Anyway this update process looks difficult, and since i have no probs with current firmware i guess i will just stick with it :p

Good things dont get outdated :D

Anyway this update process looks difficult, and since i have no probs with current firmware i guess i will just stick with it :p

lol yeah, it's not necessary... but it's insanely easy to do? literally took me 30 seconds LOL...

All you do is download it... extract it... then copy the one file to your memory card... then go to "firmware" in the camera then click "update" done.

The step-by-step guide is just extremely tedious and makes it seem like it takes longer than it does, I didn't even need it, figured it out quickly, it's just for those who NEED to know step by step... e.g. right click here. lol

The whole "rolling stutter" thing I read way back when that it was HIGHLY unlikely (if even possible) that they'd upgrade the video... that's one of the downsides to getting the first DSLR that supported "HD" video, I didn't buy it for that anyway so doesn't bother me TOO much, would be nice though, as I have taken a few short clips here and there

Well there's that too, but I was also thinking how hard was it to upgrade to 1080 and something other than 24fps? Is that really limited by hardware or what?

Well there's that too, but I was also thinking how hard was it to upgrade to 1080 and something other than 24fps? Is that really limited by hardware or what?

TBH idk, it might be? Maybe the sensor just wasn't designed for that...but even if it was, I doubt they would do it at this stage of the game, if you want 1080p (and by you I mean consumers) your gonna have to buy their D7000 or other new model. D90 is old news, they are just focusing on the new and upcoming models.

Well there's that too, but I was also thinking how hard was it to upgrade to 1080 and something other than 24fps? Is that really limited by hardware or what?

Yeah it is. Apparently Expeed 1 wasn't up to the task of 1080, where as the new expeed2 in the d7000 is a lot faster.

So the D7000 is worthy of purchasing? I currently have a D40 but looking for something with additional features and preferably got HD video.. looked at the D3100 not too keen on that. Want something thats a worthy upgrade, more semi-pro.

So the D7000 is worthy of purchasing? I currently have a D40 but looking for something with additional features and preferably got HD video.. looked at the D3100 not too keen on that. Want something thats a worthy upgrade, more semi-pro.

The D7000 is apparently one of the best cameras Nikon has released in quite some time. It is currently second only to the Pentax K-5 in image quality (in APS-C cameras and by a close margin, the Sony A580 is third, also by a close margin).

So the D7000 is worthy of purchasing? I currently have a D40 but looking for something with additional features and preferably got HD video.. looked at the D3100 not too keen on that. Want something thats a worthy upgrade, more semi-pro.

yeah, the 3100 is just a newer version of your 40. the 5000 (5100?) would be a slight upgrade with some nice features) but I'd definately suggest the 7000 if you can afford it. I have a 90 myself, and I went from a D40.

yeah, the 3100 is just a newer version of your 40. the 5000 (5100?) would be a slight upgrade with some nice features) but I'd definately suggest the 7000 if you can afford it. I have a 90 myself, and I went from a D40.

Sweet so I know not to bother with the 3100.. I am stuck between D90 and D7000. One costs more but is far superior feature/technology wise. On the other hand D90 a massive upgrade from the basic D40 which I feel very limited by now. Oh what to dooooo! If I can get a cheap D90 body I will stick with that!!

a cheap D90 is still a great camera, sure the 7000 is better, but I'm not sure I'd say it's that much better it warrants the price difference.

unless you're really going to use it for filming, but you're not, cause no matter how good the DSLR's are at filming they're still horrible to use for it, at least without buying a shoulder frame that costs even more than the camera. and besides the D90 can, unlike what the haters say, make some really nice film, as long as it's no dark you won't even see the rolling shutter.

yeah, the 3100 is just a newer version of your 40. the 5000 (5100?) would be a slight upgrade with some nice features) but I'd definately suggest the 7000 if you can afford it. I have a 90 myself, and I went from a D40.

Isn't the Image quality in the D3100 a significant upgrade from the D3000 (which was like a D60 and slightly better than a D40)?

not sure about the 3000, and it depends on what you mean by image quality.

the sensor generally gets better. the D40 also had an upgrade, they did a significan't sensor resolution upgrade for the D40x, and the 3000 I believe replaced both the 40 and 60, thoguh arguably the 5000 is the 60 replacement.

not sure about the 3000, and it depends on what you mean by image quality.

the sensor generally gets better. the D40 also had an upgrade, they did a significan't sensor resolution upgrade for the D40x, and the 3000 I believe replaced both the 40 and 60, thoguh arguably the 5000 is the 60 replacement.

Well, yes, the D5000 took the D60's position on the market, however the D3000 was basically a re-badged D60 aimed at the entry-level market.

On the D3100 they moved from a CCD to a CMOS sensor and made other improvements as well.

Well, yes, the D5000 took the D60's position on the market, however the D3000 was basically a re-badged D60 aimed at the entry-level market.

On the D3100 they moved from a CCD to a CMOS sensor and made other improvements as well.

I have done a comparison on DP Review between the D90 & D7000. Seems the only significant differences I can see stat wise are:

D7000:

Higher Megapixels

Higher ISO Limit upto 25,600 with Boost

Newer focus system - Nikon Multi-CAM4800 DX

39 focus points compared to 11

Advanced metering

Newer battery

6fps

Thats all I can see from the comparison, would anyone say this is worth the extra cash? Oh of course there is some aesthetic changes to the camera also. I need a cheap D90.. looks like I have to spend at least £450 just for a body! Need a second hand one.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
    • Thanks for the info, but I'm still not sure if I need this....
    • We check out the SKG PS700 Neck Massager by Steven Parker I was offered the chance to test out the SKG PS700 Neck Massager, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk; I figured it could offer some neck pain relief. What's in the box: SKG PS700-2 Neck Massager Rechargeable Battery (inside massager) Type-C USB cable User Manual Quick Start guide 1-Year Warranty In short, everything you need to get started. According to the official listing, here are the key features: Biomimetic Kneading & High Torque Motor: Designed with innovative biomimetic kneading heads that perfectly simulate the touch of human hands. Powered by a high-torque motor, this massager delivers powerful and precise deep tissue relief to effectively target stiff neck muscles and release built-up tension Soothing Heat & Integrated Sound Relaxation: Experience the ultimate Relaxationation with our dual-action approach. The soothing heat function gently warms your neck, while the built-in sound Relaxation provides calming audio tracks, helping you achieve a state of mindfulness and mental tranquility during your physical massage Cordless Convenience & Travel-Ready & Father's Day Gifts: Crafted for maximum portability and ease of use. Its lightweight, cordless design allows you to enjoy a premium massage anywhere without the hassle of tangled wires-whether you're taking a quick break at your desk or winding down at home Versatile Relief for Home & Office: An essential wellness companion for office workers, gamers, frequent travelers, or anyone looking to integrate mindfulness into their daily routine. It seamlessly fits into your lifestyle, providing instant neck relief whenever and wherever you need it Safe & Premium Materials: Manufactured with high-quality, skin-friendly materials to ensure a safe and comfortable experience without irritation. SKG backs this device with dedicated customer service, making it a thoughtful tech-health gift for family and friends App & Bluetooth Music Control: Connect via Bluetooth to control your massage settings through the dedicated app and enjoy your favorite music during your massage session for a fully customizable and immersive relaxation experience Red Light Warmth Technology: Features advanced red light warmth technology that penetrates deep into neck muscles to enhance blood circulation and provide soothing comfort while relieving muscle tension and stiffness Design With all that out of the way, here are my own findings. SKG does not say what materials are used to make the neck massager. However, on the product website, it mentions "soft-touch silicone" with what looks like PU leather cushioning, with the rest being mostly made up of plastics. On the inside of the massager, there are two "biomimetic kneading heads" that are motorized for the different styles of massage, which are not actually listed at all in the paper user manual, but the standard included modes are: De-stress mode, Mediation mode, Relax mode, Shiatsu mode. The massager looks quite premium and is actually very comfortable to wear. This massager is small and light enough to go anywhere, as it doesn't get in the way of anything, so I was able to use it in the chair while writing this review. Unlike the back massager, SKG does not warn in the user guide not to use it for more than 30 minutes a day (or two 15-minute sessions). However, there is a long laundry list of important safeguards to consider before and during the use of the device, and it is warned that the neck massager is not waterproof. It also includes a 1,400mAh battery with a rated power of 14W and input of 5V, which is the standard for up to USB 3.0 power (although the Amperage is not mentioned at all). SKG does not say how long it takes to charge, but a quick calculation at 2A (if that is what it is) would mean it would take roughly 1.5 hrs to charge from empty. In any case, the light around the button changes from orange to green on a full charge. In addition, it is not possible to use the device while it is charging. On the right of the neck massager is the On/Off and modes button, which also acts as a joystick. You can operate all the modes directly from the power button, as well as the app, which I'll get into a bit later: Push up: Short press to adjust Heat levels On/Off button: long press Mode Switching: Short press (while in operation) ➕ Push left: increase Music volume ➖ push right: decrease Music volume Push down: Short-press to turn Music on or off The massager defaults to De-stress mode, and it is not stated anywhere if the neck massager has overheat protection. This time around, regarding heat, the only detail I could find is that it has "triple action soothing heat." The temperature stages are not listed anywhere in the paper manual, Amazon listing, or official website. The heat levels can be adjusted through the app or directly on the device using the joystick button. Usage There's also the SKG Health app, which makes using the massager far easier than feeling around for the button on the side of your neck. If the app is stopped, you are required to log in with a verification code over email, which I am not too pleased with, as this means it will only work that way for however long SKG decides to support it through said app. However, I was not able to get the app to connect to the OS500, which I have reported back to my contact. Bluetooth appeared to be working on the neck massager as it became available to pair with my phone, but the SKG app failed to discover it. Before I forget, there's also a switch next to the USB charging port to deactivate and activate the Voice Prompt, which, when enabled, audibly tells the user when switching intensities, modes, or connecting to the app and informs when the massages start and are completed. That said, on to my likes and dislikes, which are listed below. What I didn't like Unable to connect the Neck Massager to the app Use through the mobile app relies on continued support from SKG What I liked Can be used without the app Cordless use Light and comfortable to wear Heat is also quite comfortable Where to buy: According to the official website, this has an MSRP of $249.99, but is currently $50 (on Amazon). To sweeten the deal a bit more, there's also an in-page coupon that knocks a further $20 off the price. SKG PS700-2 Neck Massager for $179.99 on Amazon (was $199.99) Apply the in-page $20 off coupon for the final price of $179.99 Just like the back massager, this gets a confused thumbs up (due to the cost). However, I cannot rate it through app usage as it failed to connect. As an Amazon Associate, we earn from qualifying purchases.
    • This Samsung T7 external SSD deal lasts less than a day by Sayan Sen Recently we had covered some nice deals of internal NVMe SSDs which include the 4TB TeamGroup G50 for only $400, the WD_BLACK SN7100 2TB for just $243, as well as the Samsung 990 PRO 1TB for $370. If however you require an external SSD for portability and quick data transfers and have a budget of less than $200 the Samsung T7 1TB model is currently on a limited time deal at just $190, it's lowest price in nearly three months. The deal ends today so you better hurry if you need one (purchase link below). The T7 weighs in at just 72 grams meaning it should be fairly easy to carry around helping in the portability department. Via its USB 3.2 Gen 2 interface the T7 promises sequential read speeds of up to 1050 MB/s and writes of 1000 MB/s. It is also fairly robust with a drop protection of up to 2 meters, though bear in mind that this is not waterproof. For that you will have to choose the rugged T7 Shield. The technical specifications of the Samsung T7 1TB are given in the table below: Specification Value Model Code (1TB) MU-PC1T0T / MU-PC1T0H Interface USB 3.2 Gen 2 (10 Gbps) Dimensions (W × H × D) 85 × 57 × 8 mm Weight 72 g Sequential Read Speed Up to 1,050 MB/s Sequential Write Speed Up to 1,000 MB/s Drop Resistance Up to 2 m (6.6 ft) Encryption AES 256-bit hardware encryption Operating Temperature 0°C to 60°C Non-Operating Temperature -40°C to 85°C Humidity 5% to 95% (non-condensing) Shock Resistance 1,500 G, duration 0.5 ms, 3-axis (non-operating) Vibration Resistance 20–2,000 Hz, 20 G (non-operating) Get it at the link below: Samsung T7 Portable SSD, 1TB External Solid State Drive, MU-PC1T0T/AM, Gray: $189.98 (Sold and Shipped by Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • I just wish they would put more love into Virtual Desktops. There is just so much more they could do.
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      85
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!