Recommended Posts

Right!

It looks like we are getting somewhere now.

I setup SquidGuard as your instructions above, stopped and restarted squidguard and now it appears everything is working.

At the bottom of the long BLOCKLIST i choose allow all for now until i can figure out how to apply a certain category to only 1 IP.

Your an amazing chap Bud :D Thanks again.

That would be an ACL, let me take a look at how you do that.

edit:

Here you go, create a group ACL, put in your kids IP as source, I used 192.168.1.40

post-14624-0-70605800-1300226076.jpg

Then I created a new category, kids - and put in yahoo.com

post-14624-0-36338200-1300226104.jpg

In the group ACL block your new custom cat or categories you want - and shazam

in my virtual machine that is on 192.168.1.40 can not access yahoo.com

But my host machine on .100 can.

post-14624-0-46501600-1300226175.jpg

  • Like 2

--Budman

Spent a while lat night looking at the different options in SQUIDGUARD and managed to get an ACL setup for 192.168.33.253 which worked, so after all your help i have finally got it working and i think i now know what i was doing wrong, when specifying to use the blocklist i wasn't telling it to use the LOCAL database also i hadn't setup any categories for it to block or deny so it looks like it was BLOCKING everything by default.

I am going to take the screenshots you posted above and make a reference guide for the future, i also noticed a CONFIG BACKUP package which i can install to backup the configuration of the firewall which may be worth doing.

Earlier on at the start of this thread you also mentioned in an edit so i didn't catch it until i was reading back over the thread but you said something about DNS and not using the ISP DNS and you also said something about installing UNBOUND which i can't find so i have either read something wrong done something wrong or need to do something i haven't done. -- I also notice that on the general settings page i have the box ticked which says something about getting DNS from the ISP.

Thanks again for all your help

:woot: :woot: :woot:

yeah you can run your own recursive nameserver, install the unbound package

post-14624-0-83209600-1300281644.jpg

So my clients never talk to my isp dns, or forward a dns request -- pfsense is the dns server. It talks to roots directly, etc. You can use dnssec this way.

maybe you play with what you got working for awhile - and we can move on to DNS at a later date ;)

Ok -- come on now.. Who rep'd a post that says in essence "Im using 2.0 RC1"

But the 3 pages of posts where I walk him through every step, tell him what he did wrong and post screenshots, etc. etc. Gets none??

Something wrong with this picture! ;)

  • Like 1

Ok -- come on now.. Who rep'd a post that says in essence "Im using 2.0 RC1"

But the 3 pages of posts where I walk him through every step, tell him what he did wrong and post screenshots, etc. etc. Gets none??

Something wrong with this picture! ;)

Ahaha thats actually kind of funny. Crazy world we live in eh Budman, what with earthquakes and Tsunamis and all.

Perhaps its PfSense developers trying to push their latest release :shiftyninja: :shiftyninja:

:p

Im not knocking you getting a rep - good for you(but did you earn it?), it just did not make sense to me - I got a PM that he rep'd me for the help I did which is great.. To be honest I could care less, just here to help people - I have gotten my fair share of rep around the forum - it feels good when people upvote you - don't get me wrong. But as long as the post help the OP or the next guy is what matters.

I just found it odd that someone rep'd a post that I had already posted he should do a few times - I agree the 2.0 line is more than stable enough to run in a home, or even a production environment to be sure. And quite a few +'s to doing so.. But the 1.2.3 line REALLY STABLE and great as well. But I like to be on the cutting edge myself - and 2.0 makes more sense with the ipv6 suff I have been playing with lately!!

But come on -- who stops by and reps a post like yours, which is a great kick in the ass for the OP mind you to move to the latest version - dont get me wrong.. But they clearly do not understand what the rep system is suppose to do.. You don't rep +1 type posts, you don't rep "me too" type posts, you don't rep "yeah I agree with that" type posts -- its suppose to be for posts that HELPED/SOLVED the users problem. And sorry but you run 2.0 does not fall into that area no way no how :)

Maybe you have great other posts? But to me I look at 631 posts in like 7 years = LURKER!! Not even part of the community at all. Sorry!

The rep system is not meant to be a 'like" type system - atleast from my take of it. Its not reddit clicking upvote, etc. But I do feel you should be able to click to see who rep'd -- can you???

  • Like 1

Im not knocking you getting a rep - good for you(but did you earn it?), it just did not make sense to me - I got a PM that he rep'd me for the help I did which is great.. To be honest I could care less, just here to help people - I have gotten my fair share of rep around the forum - it feels good when people upvote you - don't get me wrong. But as long as the post help the OP or the next guy is what matters.

I just found it odd that someone rep'd a post that I had already posted he should do a few times - I agree the 2.0 line is more than stable enough to run in a home, or even a production environment to be sure. And quite a few +'s to doing so.. But the 1.2.3 line REALLY STABLE and great as well. But I like to be on the cutting edge myself - and 2.0 makes more sense with the ipv6 suff I have been playing with lately!!

But come on -- who stops by and reps a post like yours, which is a great kick in the ass for the OP mind you to move to the latest version - dont get me wrong.. But they clearly do not understand what the rep system is suppose to do.. You don't rep +1 type posts, you don't rep "me too" type posts, you don't rep "yeah I agree with that" type posts -- its suppose to be for posts that HELPED/SOLVED the users problem. And sorry but you run 2.0 does not fall into that area no way no how :)

Maybe you have great other posts? But to me I look at 631 posts in like 7 years = LURKER!! Not even part of the community at all. Sorry!

The rep system is not meant to be a 'like" type system - atleast from my take of it. Its not reddit clicking upvote, etc. But I do feel you should be able to click to see who rep'd -- can you???

now you're making something out of nothing.. and now making this personal. You say you dont care, yet you make a post ALL about it, and NOW you target me, specifically the bold part.

I've always respected your knowledge of things Budman, but this is disrespectful to something I havnt done. Thanks for derailing this, and if you have a problem with my "post count" and calling me a lurker. PM NEXT TIME.

Insulted. You tend to do that a lot.

Ridiculous BudMan.

Also, stop being concerned about "message board rep" it means nothing in life. I'm not going to forget this next time I see you being targeted... which I have seen before in other posts. Why should I rep your posts now? When I have plenty of times in the past...

I might have worded that a bit harsh.. :blush:

I did not mean anything bad directed at you to be honest, but more at the person that rep'd you.. The lurker comment was uncalled for, sorry!!

This is more what should of stood out - and clearly not direct towards you since you can not rep your own posts.

"You don't rep +1 type posts, you don't rep "me too" type posts, you don't rep "yeah I agree with that" type posts -- its suppose to be for posts that HELPED/SOLVED the users problem"

"The rep system is not meant to be a 'like" type system - atleast from my take of it. Its not reddit clicking upvote,"

The beers and irish whisky I had been consuming since 2pm might have had a bit to do with my lurker comment? :blush:

I might have worded that a bit harsh.. :blush:

I did not mean anything bad directed at you to be honest, but more at the person that rep'd you.. The lurker comment was uncalled for, sorry!!

This is more what should of stood out - and clearly not direct towards you since you can not rep your own posts.

"You don't rep +1 type posts, you don't rep "me too" type posts, you don't rep "yeah I agree with that" type posts -- its suppose to be for posts that HELPED/SOLVED the users problem"

"The rep system is not meant to be a 'like" type system - atleast from my take of it. Its not reddit clicking upvote,"

The beers and irish whisky I had been consuming since 2pm might have had a bit to do with my lurker comment? :blush:

Apology accepted.

  • 1 month later...

Pfsense Rocks.. I am running 2.0 RC2 now.. Did the OP solve this issue in the end ?

And Glad you 2 kissed and made up ;-)

Seriously tho... got to see the funny side of all this..

Take care.

Phillip.

Yes he did get it worked out. His internet access problem was fixed when he turned his gateway device into just a modem - see earlier in the thread

"I changed the DG834G router into modem only mode which makes it into a modem only device"

Then to his accessing his modems private IP - that was fixed too, he had the wrong virtual IP set on his wan interface to allow talking to his modems internal private IP. He had set the virtual ip to the same as his modems IP 192.168.10.1 vs .2

we used teamviewer and I got on his box so I could look at his pfsense config - once he corrected that it worked just fine.

The link to the pfsense doc is earlier in the thread, but for quick reference here it is again

http://doc.pfsense.org/index.php/Accessing_modem_from_inside_firewall

I dont want to knock anyone or PFsense, but with all the trouble the OP had, I think he might of had an easier time going with smoothwall, compared to PFsense (at least to me), it may have been easier to configure OOB. Budman you sure do have a lot of patience :) Sometimes it can be difficult trying to explain stuff to people without being able to be physically there to show someone, I have to do it daily to people deployed overseas in hot zones.

The user most likely would of had issues with any router distro to be honest.. His "modem" was not a modem - it was a gateway (modem/router combo) doing NAT. And he setup his LAN network on pfsense to be the same as what his gateway was using as its private network 192.168.33/24 -- so he had the same network on both his lan and his wan of his pfsense box.

I have chatted with him quite a bit on PM, he is trying but his basic understanding of networking needs work ;)

But he is getting there - and last I heard very happy with his setup now that he got it figured out in his head what he was doing wrong.

Nothing wrong with smoothwall -- its a great firewall/router distro.. I have not played with it for quite some time. But sure it's a fantastic choice as well - there are many firewall/router distro's out there - they all have pluses and minuses.. For the last few years I have been a using pfsense, but ipcop, smoothwall, etc all work too.

lately have been running the development ipv6 stuff from pfsense, which is working out great. Not a lot of distro's out there will full tunnel/firewall support for ipv6 - and its not in the mainline for pfsense either yet, not til they start work on the 2.1 version.

How is smoothwalls ipv6 support? Is it in the mainline version - if it is a more mature implementation I might have to take another look at it.

The user most likely would of had issues with any router distro to be honest.. His "modem" was not a modem - it was a gateway (modem/router combo) doing NAT. And he setup his LAN network on pfsense to be the same as what his gateway was using as its private network 192.168.33/24 -- so he had the same network on both his lan and his wan of his pfsense box.

I have chatted with him quite a bit on PM, he is trying but his basic understanding of networking needs work ;)

But he is getting there - and last I heard very happy with his setup now that he got it figured out in his head what he was doing wrong.

Nothing wrong with smoothwall -- its a great firewall/router distro.. I have not played with it for quite some time. But sure it's a fantastic choice as well - there are many firewall/router distro's out there - they all have pluses and minuses.. For the last few years I have been a using pfsense, but ipcop, smoothwall, etc all work too.

lately have been running the development ipv6 stuff from pfsense, which is working out great. Not a lot of distro's out there will full tunnel/firewall support for ipv6 - and its not in the mainline for pfsense either yet, not til they start work on the 2.1 version.

How is smoothwalls ipv6 support? Is it in the mainline version - if it is a more mature implementation I might have to take another look at it.

Ipv6 is still in it's infant stages with smoothwall, with update 8 that was just pushed out they added kernel support, but I don't think it's ready for prime time. I touched pfsense briefly when setting up my firewall/router, but when i gave smoothwall a test 2 years ago, it just worked. I spent maybe 5 minutes out of the box with it's setup tool and it just launched. installing packages/mods requires a little more work (usually requires the terminal), but it's very robust, and if you're into caching/im filtering, that's already built into the box (imspector and squid). for those with multicore processors, SMP is now supported as well.

All of those features are available on pfsense - it works out of the box as well.. Its normally a 5 minute install to up and running.. The OP just for some strange reason setup his lan network to the same as his router he already had. That would of caused an issue with any router distro.

Understanding that he was already doing nat, or for that matter keeping the default lan ip range would of worked with a double nat, etc.

Squid is click to install no terminal access required to install packages like squid, squidguard, im inspector, etc.

Im glad your happy with smoothwall - its a good distro and all.. But with what the OP did smoothwall would of had the same issue.

Hard to route traffic and nat when your lan IP is the same IP as the gateway on your wan interface ;)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Sadly "beats Steam Machine" isn't much of a brag.
    • Passkeys: Think of them like a broken heart necklace. Imagine one of those heart necklaces that breaks into two matching pieces. One person keeps one half, and the other person keeps the other half. With passkeys, the website has one half, and you have the other half. If the website gets hacked and someone steals its half, that stolen piece is useless by itself. It cannot unlock your account without your matching half. This particular heart necklace is one of a kind, there is only one in existence. Your half of the necklace has to be stored somewhere. It might be stored on your phone, tablet, computer, security key, or a password manager that can sync it between all your devices. A security key is a small physical device that you keep with you, kind of like a house key, car key, or flash drive. I would not usually recommend a security key as the first option for the average person. For most people, it is easier to use their phone, computer, or a password manager that can sync passkeys between their devices. A security key is more like a spare key you keep in a safe place, just in case you lose access to your other devices or your password manager. Some security keys plug into your computer. Some plug into your phone or tablet. Some get tapped against your device. The idea is simple: a security key can hold another passkey for the same website. Think of it like creating a second one-of-a-kind heart necklace for the same account. One necklace could be paired with your password manager, while another necklace could be paired with your security key. That means the website has more than one matching half on file. One half matches the passkey in your password manager. Another half matches the passkey stored on your security key. So, if you lose access to your phone, computer, or password manager, you would still be able to log in using the passkey stored on your security key. Think of it like keeping an extra special necklace piece on a tiny keychain, stored somewhere safe. The website still has the matching half for that security key, but your half is safely stored inside the little key. A passkey does not automatically exist on every device you own. It lives wherever you save it. If your half is stored on one device, then that device is the one that has the matching piece. For example, if you create the passkey on your Windows computer and it is only saved to that computer, your iPhone does not automatically have that same half. If you create it on your iPhone and it only stays on that iPhone, your Android phone does not automatically have it either. That is where password managers come in. A password manager can act like a protected jewelry box for your passkeys. Instead of your half of the necklace being locked to only one device, the password manager can securely sync that half to your other approved devices. For example, Apple Passwords and iCloud Keychain can sync passkeys between your Apple devices. Google Password Manager can sync passkeys with your Google account. But password managers such as 1Password and Bitwarden can sync passkeys between everything, your phones, tablets and computers. Now, you might ask: “What happens if I lose access to the device that has my passkey?” That depends on where your passkey was saved and what recovery options the website gives you. If your passkey was synced through a password manager, you may be able to sign in from another device that has access to that same password manager. For example, if your passkey is saved in iCloud Keychain, Google Password Manager, 1Password, or Bitwarden, another approved device may still have access to it. If your passkey was saved only on one phone, computer, or security key, and you lose that device, then you may not have your half of the necklace anymore. In that case, you would usually need to use the website’s backup login or account recovery options. A lot of websites that support passkeys still let you fall back to your regular password. So if you lose access to your passkey, the site may still let you log in with your password, a code sent to your email, a text message, a recovery code, or some other account recovery process. That is convenient, but it is also important to understand: if the website still allows password login, then your password still matters. Passkeys are safer than passwords, but if your account still has a password as a backup, you should still use a strong, unique password and turn on two-factor authentication if the website offers it. This is why it is a good idea to have more than one safe way back into important accounts. For example, you might keep your passkey in a syncing password manager, add a second trusted device, save recovery codes somewhere safe, or set up a backup security key. A passkey is very secure, but just like a real key, you need a backup plan in case you lose access to it. Now, you might ask: “What stops a hacker from copying my half of the necklace?” That’s the important part: your half is protected. It is not something you type in, and it is not something the website gets to keep. Think of your half as being locked inside a tiny safe on your phone, computer, security key, or password manager. That safe only opens when you approve it with your fingerprint, face, PIN, or device password. When you log in, the website does not need to see your half. It only needs proof that your half matches its half. Your actual half is not handed over to the website. This is different from a password. With a password, you type the secret into the website. If you type it into a fake website, the hacker now has it. With a passkey, you are not typing your secret into the website. Your device is proving you have the matching half without giving the half away. That also helps protect you from fake websites. If someone makes a fake login page that looks like the real site, your device can tell it is not the real match. It will not use your passkey there. Now, could someone use your passkey if they stole your device, got into your password manager, or somehow unlocked the safe that holds your half? Yes, that is why your device password, PIN, fingerprint, face unlock, and password manager security still matter. But a hacker cannot just steal your passkey from the website or trick you into typing it into a fake page like they can with a password. That is why passkeys are safer than passwords. The two matching pieces have to come together, like two lovebirds who were once separated and are finally reunited.
    • Newegg offers insane combo deal on Amazon Prime Day 2026 that beats Steam Machine by Sayan Sen Building a PC is undoubtedly difficult nowadays but with this epic combo deal, Newegg is trying to make it as easy for you as it is possible. If you are making a new one or even upgrading an old system to a new Windows 11 device, this combo bundle is truly unmissable as you get AMD's Ryzen 9800X3D, a compatible X870 motherboard, a 240mm AIO liquid cooler and finally a Samsung 990 PRO SSD all for under $1000 (purchase link under the specs table down below). This should beat out the newly launched Steam Machine from Valve in terms of performance and performance per dollar especially if you are willing to set Linux up on it. Essentially with this combo you will get the AMD Ryzen 7 9800X3D 8-core 3D V cache CPU, Samsung's 990 PRO 2TB NVMe SSD, the MSI MAG X870 TOMAHAWK WIFI ATX Motherboard, and finally the Cooler Master Elite Liquid 240. Thanks to that massive vertically stacked L3 cache, the X3D desktop processors, including the 9800X3D, also come with the benefit of not needing fast memory. Even DDR5-5600 should be plenty for it. The technical specifications of the Ryzen 7 9800X3D are given in the table below: Specification Value Architecture Zen 5 Cores / Threads 8 / 16 Base Clock 4.7 GHz Max Boost Clock Up to 5.2 GHz L1 Cache 640 KB L2 Cache 8 MB L3 Cache 96 MB Total Cache 104 MB CPU Core Process TSMC 4nm FinFET I/O Die Process TSMC 6nm FinFET Socket AM5 Default TDP 120W Max Temperature (Tjmax) 95°C Thermal Solution Not included Memory Type DDR5 Max Capacity 256 GB Memory Speeds 2x1R: DDR5-5600 2x2R: DDR5-5600 4x1R: DDR5-3600 4x2R: DDR5-3600 PCIe Version PCIe 5.0 PCIe Lanes (Total/Usable) 28 / 24 USB 3.2 Gen 2 (10Gbps) 4 USB 2.0 1 Graphics Cores 2 CU RDNA 2 Frequency 2200 MHz DisplayPort over USB-C Yes Overclocking Unlocked Up next we have the tech specs for the MSI MAG X870 TOMAHAWK WIFI Motherboard: Specification Value Chipset AMD X870 CPU Support AMD Ryzen 9000 / 8000 / 7000 Series Desktop Processors Socket AM5 Memory Slots 4 × DDR5 UDIMM Maximum Memory Capacity 256GB Memory Support DDR5 8400–5600 MT/s (OC), DDR5 5600–4800 MT/s (JEDEC) Integrated Graphics Outputs 1 × HDMI 2.1 FRL (up to 8K 60Hz) 2 × USB4 Type-C with DisplayPort 1.4 HBR3 (up to 4K 60Hz) Expansion Slots PCI_E1: PCIe 5.0 x16 (CPU) PCI_E2: PCIe 3.0 x1 (Chipset) PCI_E3: PCIe 4.0 x4 (Chipset) Audio Realtek ALC4080 Codec 7.1-Channel USB High Performance Audio Supports up to 32-bit/384kHz playback on front panel S/PDIF output M.2 Slots 4 × M.2 M2_1: PCIe 5.0 x4 (CPU, 22110/2280) M2_2: PCIe 5.0 x4 (CPU, 2280/2260) M2_3: PCIe 4.0 x2 (Chipset, 2280/2260) M2_4: PCIe 4.0 x4 (Chipset, 2280/2260) SATA Ports 4 × SATA 6Gb/s RAID Support RAID 0, 1, 5, 10 for M.2 NVMe storage devices Rear USB Ports 4 × USB 2.0 3 × USB 5Gbps Type-A 2 × USB 10Gbps Type-A 1 × USB 10Gbps Type-C 2 × USB4 40Gbps Type-C Front USB Headers 4 × USB 2.0 4 × USB 5Gbps Type-A 1 × USB 20Gbps Type-C LAN Realtek 8126-CG 5G LAN Wireless Wi-Fi 7 (M.2 Key-E module pre-installed) Supports 2.4GHz / 5GHz / 6GHz bands Up to 5.8Gbps Supports 802.11 a/b/g/n/ac/ax/be Bluetooth Bluetooth 5.4, MLO, 4KQAM Internal Power Connectors 1 × 24-pin ATX Power 2 × CPU Power Connectors 1 × PCIe 8-pin Power Connector Fan Headers 1 × CPU Fan 1 × Combo Fan (Pump/System) 6 × System Fan RGB Headers 3 × Addressable V2 RGB (JARGB_V2) 1 × RGB LED (JRGB) Other Internal Headers 1 × EZ Conn-header 2 × Front Panel Headers 1 × Chassis Intrusion 1 × Front Audio 1 × TPM 2.0 Header Debug Features 4 × EZ Debug LEDs 1 × EZ Digit Debug LED Rear I/O Ports Clear CMOS Button Flash BIOS Button HDMI 2 × USB 40Gbps Type-C 1 × USB 10Gbps Type-C 4 × USB 10Gbps Type-A 3 × USB 5Gbps Type-A 4 × USB 2.0 5G LAN Port Wi-Fi/Bluetooth Antenna Connectors Audio Connectors Form Factor ATX The Samsung 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification Value Interface PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 Controller Samsung In-house Controller NAND Flash 3D TLC DRAM Cache 2GB LPDDR4 Sequential Read (Max) 7,450 MB/s Sequential Write (Max) 6,900 MB/s Random Read (4K) Up to 1,400,000 IOPS Random Write (4K) Up to 1,550,000 IOPS TBW (Endurance) 1,200 TBW MTBF 1,500,000 hours Operating Temperature 0°C to 70°C Storage Temperature -40°C to 85°C Shock Resistance 1,500G / 0.5ms Heatsink No Get the combo deal at this link: AMD Ryzen 7 9800X3D, Samsung 990 PRO 2TB, MSI MAG X870 TOMAHAWK WIFI motherboard, Cooler Master Elite Liquid 240: $784.99 + $25 off with promo code FTTF77: $759.99 (Sold and Shipped by Newegg US) Good to know This Newegg deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • I heard from a lot of people that driver support for the latest games when RDNA first came out (Radeon 5000 series) was pretty bad, but if you didn't buy the card on day one, or were not trying to play the latest titles, then you were isolated from that issue. Other than that, it's been good and only getting better.
    • Meta launches new AI glasses in 26 styles and Muse Spark multimodal capabilties by Pradeep Viswanathan Meta today announced a new line of Meta Glasses in partnership with EssilorLuxottica. The new AI glasses build on the company’s existing smart glasses portfolio, which is sold under the Ray-Ban Meta and Oakley Meta brands. The new Meta Glasses start at just $299, are compatible with prescription lenses, and will be available in 26 styles across different colors, lenses, and frames. At launch, Meta Glasses will be available in three frame styles. The Meta Adventurer features a clean rectangular design and comes in Standard and Large sizes. The Meta Fury is a bolder frame for users who want a stronger look. Meta Glasses by Kylie is a slim oval frame designed in collaboration with Kylie Jenner. Similar to existing Meta AI Glasses, the new Meta Glasses include a dedicated action button that can be used to quickly access Meta AI or launch a favorite feature. They also feature open-ear speakers for calls, music, and more. Meta has also included a multi-mic array with wind noise reduction for calls and messaging. Users can capture photos and videos hands-free using voice commands. Meta claims more than eight hours of battery life, while the portable charging case can provide up to 40 additional hours. As expected, Meta Glasses come pre-loaded with Meta AI powered by Muse Spark from day one. Muse Spark is the first model from Meta Superintelligence Labs with improved multimodal capabilities. The same Meta AI upgrade is also now available on existing Ray-Ban Meta and Oakley Meta Glasses in the US and Canada via an update. With the Muse Spark-powered AI assistant, Meta AI in the new glasses can provide smarter answers, understand what the user is seeing, and help with daily tasks such as calendar management and navigation. Meta also announced an upcoming feature called the dynamic photo feature, which captures multiple frames and recommends the best one. Pedestrian navigation is also coming soon to these glasses. Meta is also adding support for 14 new live translation languages, including Japanese, Mandarin Chinese, Hindi, and Korean. The new Meta Glasses are available starting today through Meta.com, Best Buy, Amazon, LensCrafters, Sunglass Hut, and select retailers.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      468
    2. 2
      +Edouard
      166
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!