What's the best DVD-R brand?


Recommended Posts

if those dvd's are readable in full speed (which means less errors or retries that your dvd-rw player is making while reading those memorex dvd's) than it's allright.But if your drive is reading it slowly like 1mb/sec than it's not a good sign.

how can I test if they're readable at full speed? They play on my DVD players just fine. How do I test and see if it's reading it slowly?

I'll echo the same thing a few above have said. Taiyo Yuden are by far the best. Even their value line, which are considerably cheaper come out better then just about any other brand. I think someone else said it above, but the blanks made in Japan are just about always better than when they are made anywhere else.

Verbatim if you can afford it. Otherwise, any other DVD would be fine but you need to burn at low speed to minimize errors. They can advertise as 8x 16x or whatever but don't trust the advertising. Besides, cheap DVDs will stop working after a couple of years so check them regularly to make sure everything is ok.

I'll echo the same thing a few above have said. Taiyo Yuden are by far the best. Even their value line, which are considerably cheaper come out better then just about any other brand. I think someone else said it above, but the blanks made in Japan are just about always better than when they are made anywhere else.

right, I always try to have a spindle of Taiyo Yuden blanks to copy stuff that needs to be kept, but i'll buy any brand for stuff that i'm not going to need in a while...

:laugh: Fair enough, I guess it is clear-cut.

Verbatim is the brand to go for.

I have nothing against Memorex (I've used their DVD+RW and CD-RW media for the past year-plus); however, I'm not a fan of -R media (from anyone) given recent stability advances in terms of +RW media.

Also, while -R media used to have a large price advantage over +RW media, that is now only true for CD-sized media; the advantage for DVD-sized media has practically gone away, especially given the increased tolerances for rewrites. I don't even buy write-once media any more.

It depends on where the disc was manufactured... not the brand name. There are a number of low cost Verbatim DVD-r and DVD+R that are causing a lot of people grief... mostly in the Life Series. The last I checked it was made by CMC MAG-coded media and is pretty crappy (but I could be wrong).

Honestly, the state of DVD media is going downhill. It probably has to do with the razor thin margins they are making on the sale of discs... 100pak for less then $20 sometimes. Not much profit to be made here, and much easier to outsource to cheap manufacturing plants.

The only real archival DVDs are: JVC Taiyo Yuden and some Verbatim/other branded... those produced by Mitsubishi Chemicals, Mitsubishi-Kagaku Media, Verbatim. I would avoid TDK. It stopped producing quality media in 2006 and Sony left the market in 2010. You will find both still, but they are not the same, though you probably should be able to purchase quality Sony sources for a while.

Here is a guide:

http://www.digitalfaq.com/reviews/dvd-media.htm

  • Like 1

Taiyo Yuden is what I use. Just seem to have a higher success rate for a stack of 100. Also I like to get them because there is no branding on the discs. Overall they cost a little more, but I will happily pay it.

http://www.rima.com/CTGY/TAIYOYUDEN.html

Taiyo Yuden is what I use. Just seem to have a higher success rate for a stack of 100. Also I like to get them because there is no branding on the discs. Overall they cost a little more, but I will happily pay it.

http://www.rima.com/CTGY/TAIYOYUDEN.html

I don't use my burner a lot, but I have used this brand and they worked very well. As with most things, you get what you pay for.

I have learned to use RW DVDs.

You get a second chance to burn, if something goes wrong.

I have also learned to keep the burn speed low, say at 2X -- no matter what the advertised DVD label says, or the DVD drive claims.

And I give a plus 1 for Verbatim.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Surprise Execs are dumb. I hope the rehired engineers said were not coming back until we get 2x our salary.
    • Ford execs say they made a mistake when they replaced human engineers with AI by David Uzondu Ford recently announced that over the last three years, it's had to rehire about 350 "gray beard" engineers to mentor younger staff and reprogram diagnostic systems and AI tools that were failing to meet up to quality expectations. The company's VP of vehicle hardware engineering, Charles **** said that leaders overlooked the deep experience of veterans who survived many product cycles. **** admitted that simply replacing them with AI was a huge mistake, and that while AI is "a fantastic tool," it remains "only as good as the information you use to train it." The rehired engineers now run mandatory meetings to troubleshoot vehicles and reprogram automated engineering software and AI tools to prevent glitches before production. These technical specialists hunt for failure points before parts ever reach the plant floor, helping prevent the massive recalls and defects that previously cost the company billions as it aims to cut one billion dollars in expenses this year. In last year's JD Power Quality Survey, an annual study that measures the quality of a car during the first three months of ownership, Ford finished 10th among mainstream brands and scored below the industry average. But this year, JD Power ranked the automaker as the top mainstream brand, placing it above the likes of Toyota Motor Corp. and Honda Motor Co. Ford attributed this massive improvement directly to the expertise of these returned engineers. Ford's realization that AI cannot magically design and test quality vehicles without senior human oversight is just the tip of the iceberg. When Careerminds looked at companies that conducted AI-driven layoffs, researchers found out that 35.6% of those companies had to rehire more than half of the employees they previously fired. Another 32.7% had to rehire between 25% and 50% of them. In 2024, Sebastian Siemiatkowski, CEO of Klarna, proudly announced that its new chatbot was doing the work of 700 full-time customer service agents. As a result, the fintech company froze hiring and cut hundreds of positions. But by mid 2025, and into 2026, Klarna was scrambling to recruit human agents again because customer satisfaction had plummeted. It turns out, while AI is very good at answering basic questions like how to check an account balance, when faced with complex customer issues that require nuance, the thing usually resorts to the unhelpful, robotic corporate jargon we all know and love.
    • Free AI in IDEs is shifting to paid models Or you know, you could just learn to actually design and code apps, use frameworks to handle the repetitive parts and not use AI at all - and voila... free for life!
    • In a sane world US antitrust laws wouldn't even allow these companies to be in the position to be subjected to EU directives. As you say, better than oligarch nothing.
    • Apple reportedly has a second-generation iPhone Fold planned for 2027 Good grief, Apple hasn't even released a first folding phone and the Apple faithful is already obsessing over the sequel? Seriously people, go out and touch grass... because this level of obsession is borderline stalkery/neurotic.
  • Recent Achievements

    • Week One Done
      xvvxcvv earned a badge
      Week One Done
    • One Month Later
      xvvxcvv earned a badge
      One Month Later
    • Enthusiast
      Xonos went up a rank
      Enthusiast
    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      405
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      129
    4. 4
      neufuse
      69
    5. 5
      Xenon
      68
  • Tell a friend

    Love Neowin? Tell a friend!