Any advice for my first DSLR ?


Recommended Posts

Hi guys,

I'll be getting my first real paycheck next month (yay !) and I was thinking about geting my first DSLR, something I always wanted to do as I'm huge fan of photography (actually read countless books without ever practicing). I'm seeking your help here as I don't want to be blinded by my excitment. What I would like to achieve is a long-term investment (something that I'll be using at least for 2-3 years) so I can start working on the lens collection. My budget would be in the 1000$ range but I'm willing to put more on the table if it's worth it.

Any help would be very much appreciated :)

Link to comment
https://www.neowin.net/forum/topic/994102-any-advice-for-my-first-dslr/
Share on other sites

Well depends on availability. Finding it here in Morocco would be better but if I can't do that I'll just buy it online.

PS : I was just looking at the EOS 5D Mark II and that thing is beautiful ! Do you think it would be worth it to wait a little longer and buy it ? Or is there a cheaper satisfying alternative that I can go with ?

Argote, yep I'm aware of that :) That's why I asked if it would be worth it to wait a little longer and go with it ? In any case, any advice on a ~1000$ DSLR would be appreciated !

EDIT : Thanks for the suggestions, I'll look into these and figure out which one suits me.

like he said guys... he is aware it is above $1000 and (like he mentioned in his original post) he is willing to go ABOVE $1000... IF it is worth it.

So the question isn't "will the 5D MKII ever be $1000" the question is "is it worth it to spend the extra money to get a 5D MKII opposed to another camera that is around the $1000 price range"

I personally do not know about the 5D MKII so I can not answer that question, but as others have mentioned, the list that Argote gave is pretty good, look into those cameras, hopefully someone else will be able to tell you if it would be worth it for you to wait a little longer and save up for the 5D MKII

Like Crazzy said, Nikon and Canon are your best choices. (mainly because they have such a huge selection of lenses) I recommend testing one of each to determine which brand feels better in your hands.

Ok landscapes/urbex: You'll want a really good wide angle lens for that. Expect an additional $1500-2000 for that. I dunno what canon's top of the line is, but something in the 10-25mm range with a constant aperture of F4 or faster. I'm sure they have something wide that's "L" class.

I was in a similar situation (Although it wasn't for a first dSLR) to decide whether I should get a 60D, 7D, or 5D2. (Avoid those Digital Rebels... just my personal opinion)

In the end I stuck with an EOS 60D and has been turning out impressive photos. Sure the 5D2 is full frame but are you really willing to pay 2.5x the price? For most enthusiasts and even semi-pro the 60D offers excellent bang for the buck imo. Spend your money on better lenses and buy a good flash.

Alright yeah, I agree with most people, don't go full frame for now, as long as you get a current midrange dslr, it will last 2-3 years (as you want).

As crazzy said for what you want (landscape/urbex) a wide-angle is a must, but you don't HAVE to spend as much as he says; I would look into Tokina's 11-16 f/2.8, I have it and it is a great lens!

Here are some Urbex shots I did with mainly it:

In addition, you are going to need a tripod.

So again, I would go with a body near the $1000 range... and then get a nice wide-angle and a basic 35mm or 50mm to start with

Wow thanks a lot guys :) I think I'll go with what you said and get a 1000$ body so I can invest in lens. Gonna check out what you suggested and keep you posted if I need any more advice. Thanks again !

By the way, awesome shots remus :)

In my opinion, if you need to ask if it's worth saving up for something like a 5D over a cheaper body, the answer is already no.

This is grossly oversimplifying, but these days the body is towards the bottom of the list of things that affect photo quality - technique, lens, available light, etc are all more important.

I think it's best when starting out to get a cheap but decent body - my girlfriend just bought a 1000D, for example. That thing can take superb pictures, especially with the L lens that normally lives on my 7D. Once you get experience, you'll start figuring out if a more expensive body would be better for you. The more expensive bodies buy you features - weatherproofing, a faster image processor, more AF points, more megapixels, etc - but not necessarily better image quality.

So, in summary: Photo quality = Technique + Lens + body.

Starting out with a cheap body means you can spend more of a limited budget on lenses, which will benefit you more than a slightly better body. You can then "graduate" to better bodies as you see fit.

Thanks iKenndac :) I fully agree with you, it's just that I want to seize this opportunity to get something that will last me, something that I will just get and forget so I can concentrate on lens without feeling limited by the body. After reading some reviews on what you guys suggested (and looking for different opinions on the web) I think I'll settle on the Nikon D7000 camera. What do you think guys ? Anyone had a previous experience with it ?

The D7000 is a great camera. I used mine since launch in November and couldn't be happier. It gives me sufficient controls, fits well in the hand, has great low light performance for a DX sensor and has enough "pro" features and build quality to satisfy most people. I've collected some lenses to go along with it and probably will move to a pro/FX body once I get better.

If you are willing to pay a bit extra for the D7000 then it is definitely worth it. It is one of the best APS-C cameras out there right now. It is right up there with the PENTAX K-5, better than the 7D IMO and Sony doesn't have a prosumer grade body right now (though the A580 uses the same sensor).

The only thing to consider here IMO is whether to get the D7000 or save some money and go with the D5100 (same IQ but less direct controls, smaller body, no in-body motor and less advanced AF system). I'd say go with the D7000.

As crazzy said for what you want (landscape/urbex) a wide-angle is a must, but you don't HAVE to spend as much as he says; I would look into Tokina's 11-16 f/2.8, I have it and it is a great lens!

Well it depends. If he was gunna dish out for a 5DMKII, it'd be stupid to put a $600 lens on a body that expensive. See quote below!

So, in summary: Photo quality = Technique + Lens + body.

+100

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Waymo recalls self-driving software after cars enter closed freeway work zones by Paul Hill Waymo, the self-driving car maker owned by Alphabet – the parent company of Google –, has recalled some of its fifth-generation Automated Driving Systems (ADS). It did so after some of its cars drove through closed construction zones. According to the National Highway Traffic Safety Administration (NHTSA), the affected vehicles were capable of driving through a closed freeway construction zone and continuing to drive at speed. The listing on the NHTSA website says that Waymo is currently developing a solution to fix this issue, but in the meantime, freeway driving is being restricted. Waymo will update its ADS software so that vehicles can detect when they can avoid entering construction zones. According to the Safety Recall Report, on April 20, 2026, Waymo’s Field Safety Committee began meetings reviewing an event from April 11, 2026, and five events from April 19, 2026, where Waymo’s autonomous vehicles didn’t recognize and drove past ramp closure signs into the pre-planned freeway construction zones. This took place in Phoenix, Arizona. Separately, on May 18, 2026, seven Waymo vehicles entered freeway lanes with active construction in the San Francisco Bay Area by driving between cones that were placed to show the lane was closed. On the back of both of these events, Waymo restricted freeway driving until it could address the issue. In June, Waymo’s Safety Board reviewed the issue and additional information related to ADS performances around construction zones; then, as a result, it decided to conduct a recall. This development is not good for Waymo as it adds to a growing list of technical hiccups its cars have experienced. Ultimately, it will lead to more scrutiny from lawmakers around the world who will be more cautious about letting autonomous vehicles on their roads without tighter regulation. For readers in areas where Waymo operates, does this news make you more wary about stepping into one of these vehicles?
    • I'm still on Windows 10 22H2 because I didn't want to deal with all the issues in Windows 11, so I waited almost a week before installing the latest Patch Tuesday update (KB5094127), I went ahead and did it, and it was a huge mistake—ever since then, my File Explorer has seen a performance drop of about 30% when transferring large files... Once again, Microsoft has outdone itself! This update cannot be uninstalled, either through the Control Panel (via Settings) or by accessing Advanced Startup Options. The only possible alternative would be to use system restore points, but I’d have to reinstall all app and driver updates (and there’s no guarantee it would work). Or there’s the “nuclear option” of a in-place repair without losing files or apps, but even then, all my customizations would be lost! Microsoft just can’t help but mess everything up! Way to go, Microsoft! But I still don’t want your c****y Windows 11!
    • Microsoft: Windows 11 could finally solve a major issue across AMD, Nvidia, and Intel GPUs by Sayan Sen While Microsoft has been trying to improve it, Windows 11 is definitely not flawless, as even today some issues are taking a year to publicly acknowledge. However, one area of trouble that may finally see much better results soon is graphics driver crashes. Work on graphics driver timeouts, also called Timeout and Detection Recovery (TDR), is not new as the latest WDDM 3.2 also has specific improvements regarding it. Windows Display Driver Model (WDDM) version 3.2 is supported on Windows 11 24H2 and 25H2. However, with the upcoming version 26H2, TDR crash diagnosis could go to the next level as Microsoft is introducing a new DirectX 12 API feature called "DirectX Dump Files". Similar to how system memory dump files work when a system crashes or freezes or encounters any such major issue, DirectX Dump Files (DDF) will essentially record a snapshot of the GPU execution right at the moment a graphics-related crash or hang or freeze occurs, so that developers can better understand and diagnoze these TDR and timeout detection errors. The dump will be available as a .dxdmp file for analysis and it will be a comprehensive dump file generated with detailed insights about the hardware, drivers, Windows, as well as the affected application. This should be another welcome change in this department. Earlier at GDC 2026, when the technology was first debuted, Microsoft had shared more details regarding it. The company had explained how DDF is designed to gather data from every layer of the graphics stack into a single file, eliminating the need for developers to manually correlate logs from multiple tools. As mentioned above, the dump can contain a lot of useful details like GPU hardware state information such as register values, shader program counters, page fault virtual addresses, shader memory data, and command buffers. Alongside that, it also captures DirectX runtime and kernel information, including D3D objects, pipeline state objects, device error data, adapter details, and CPU call stacks. Microsoft says the feature has been built around two primary use cases: retail device removals and local device removals. The former allows developers to collect crash information from end users' systems in the field, while the latter helps QA teams and developers investigate issues on test machines. Developers will also be able to include up to 2 MB of custom application data through new D3D12 APIs, providing additional context for troubleshooting. In addition, Microsoft is introducing three dump collection modes ranging from zero-overhead capture, which has no runtime performance impact on supported hardware, to higher-detail modes that collect more vendor-specific debugging data. On compatible Tier 2 hardware, zero-overhead dumps will be enabled by default, meaning developers may begin receiving useful crash diagnostics without making any code changes. The table below explains the three tiers: Tier Description NO_OVERHEAD Enables crash capture with no runtime cost and is suitable for broad deployment MEDIUM_OVERHEAD Provides a balance, capturing additional diagnostic data with moderate impact HIGH_OVERHEAD Collects the most detailed GPU and driver state available, enabling deeper investigation at the cost of higher runtime overhead In terms of availability, the company expects broader release to be around the fall of 2026, which should be right around the time when Windows 11 version 26H2 lands. Right now, DirectX Dump Files are available as a preview and currently, only AMD has the compatible AgilitySDK Developer Preview driver version 26.10.07.02. You can find the official announcement post here on Microsoft's website.
    • And with SO much better perf than the laggy mess that is Files.
  • Recent Achievements

    • One Month Later
      Sharbel earned a badge
      One Month Later
    • First Post
      BizSAR earned a badge
      First Post
    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      598
    2. 2
      +Edouard
      190
    3. 3
      PsYcHoKiLLa
      79
    4. 4
      Michael Scrip
      76
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!