Apple Restricts Hard Drive Replacements on New iMacs


Recommended Posts

Apple Restricts Hard Drive Replacements on New iMacs

As noted by Other World Computing, Apple has implemented a new temperature sensor system on its latest iMac models that significantly hampers the ability of users to replace their original hard drives in the case of failure or a desire to upgrade. Without the custom 7-pin hard drive cable and proprietary firmware included on stock hard drives in the new machines, the new iMacs' fans spin to full speed and the machines fail to pass the Apple Hardware Test.

For the main 3.5" SATA hard drive bay in the new 2011 machines, Apple has altered the SATA power connector itself from a standard 4-pin power configuration to a 7-pin configuration. Hard drive temperature control is regulated by a combination of this cable and Apple proprietary firmware on the hard drive itself. From our testing, we've found that removing this drive from the system, or even from that bay itself, causes the machine's hard drive fans to spin at maximum speed and replacing the drive with any non-Apple original drive will result in the iMac failing the Apple Hardware Test (AHT).

As the report notes, the change does mean that anyone seeking to replace the hard drive in a new iMac will have to go through Apple, limiting options and increasing costs.

It is not a matter of "if" but rather a matter of "when" your hard drive is going to fail. We preach this all the time in regards to having a proper backup strategy in place to prepare from when that failure happens. But it seems now, that when that happens to the main drive on your iMac, you're left with two options - buy a new drive from Apple and have them install it via one of their Authorized Service Centers, or enjoy the rather large Apple logoed paperweight on your desk. Want a 3.5" drive larger than 2TB? Too bad - Apple doesn't offer them.

Apple has not officially supported do-it-yourself hard drive replacements on the iMac for many years, but many users have still elected to take on the task themselves or have others not specifically authorized by Apple perform the swap for them.

Source: Mac Rumors

Ugh, it's kind of unfortunate that they felt the need to do this... I'm sure it has some technical benefits while the drive is working, but surely they would have realized that people swap their drives when their iMacs are out of warranty...

  • Like 3

I'm sorry but this is BS....... When people like Dell had non-standard power supplies people where all up in arms about how it wasn't replaceable, but this is a darn hard drive..... these have been standardized since forever...... stop being so stupid apple.... the standardization people should be screaming about this but most of them are probably in bed with their mac's right now making love to them....

  • Like 4

This is why is always good idea to buy an Apple Care Support.

You shouldnt HAVE to pay $170 just because Apple thinks its funny to make non-standard connectors. Most other computers allow you to swap out parts.

  • Like 5

just wait till they glue your case shut and make it unable to replace ANYTHING and treat it like an iPhone / iPod / iPad where nothings replaceable...... then make propitiatory Keyboard and mouse ports and take us back to the 1980's with hardware interoperability again.....

  • Like 3

Well it surprises me it took this long for apple to do something like this. They are a hardware company after all. Still only people who lose out are people who actually own a mac, so they weren't to bright in their purchasing decision anyway. (with upgrades in mind at least)

the unibody and the macbook (pros) are a big deterrent .... now only you cannot replace batter (if/when it gets messed up) but now ram is also locked, airport and other things locked, now drives are locked ....

I am not saying joe doe will want to open his shiny 3000$ machine and upgrade ram/drive BUT, for those that are more tech inclined cannot do ram/HD upgrades because it will void warranty and go through a lot of grief ..... crap move

What a dirtbag move by Apple. I hope they reverse this decision after it gets some attention in the blogsphere.

Its too late the machines are already out i dont think they are going to re-engineer the hardware and firmware because of a few disgruntled people on the internet.

the unibody and the macbook (pros) are a big deterrent

Why?

You can replace the hard drive and ram very easily in the MBP's.

Its only the macbook air where you can't replace things so easily (well, and now the new iMac).

  • Like 1

What a dirtbag move by Apple. I hope they reverse this decision after it gets some attention in the blogsphere.

Why?

I'm sorry but the guys who "open their boxes and replace stuff" are an insignificant minority of the overall computer users - no matter how much noise they make out of it and Apple knows this. They could make all components in all of their machines non-user changeable and no one would give a rats ass except a few few people in online forums.

Sure, people like you and me would suffer from this but we are, after all, a very - VERY small portion of their userbase. Barely a blip on the radar.

Hard drives are not meant to be user-replaceable in iMacs anyway. All you can mess with is the RAM unless you tear the whole thing apart.

Exactly, the all-in-one computers are suppose to be non upgradable. The only thing you can mess is with memory. You want upgradable parts? buy a Mac Pro.

Why?

I'm sorry but the guys who "open their boxes and replace stuff" are an insignificant minority of the overall computer users - no matter how much noise they make out of it and Apple knows this. They could make all components in all of their machines non-user changeable and no one would give a rats ass except a few few people in online forums.

Sure, people like you and me would suffer from this but we are, after all, a very - VERY small portion of their userbase. Barely a blip on the radar.

Right and what happens when your warranty runs out and your HDD dies, do you go to your local/favourite store and pick up a cheap hard drive.....no you cant you have to pay Apples prices because they are propietary connectors.

I already had this problem with my current iMac. The SSD I replaced my internal drive with didn't have a place to connect the temperature sensor cable. I have to use shell scripts on launch to limit the fan speed. I'm sure it wouldn't pass the AHT because that cable is unplugged.

Right and what happens when your warranty runs out and your HDD dies, do you go to your local/favourite store and pick up a cheap hard drive.....no you cant you have to pay Apples prices because they are propietary connectors.

Hey, that sounds exactly like... my car.

'sup Jenson, let's demand that car manufacturers standardize everything?

  • Like 3
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Qmmp 2.3.3 by Razvan Serea Qmmp (Qt-based MultiMedia Player) is a free, open-source audio player that delivers a classic music listening experience with a modern foundation. Inspired by the legendary Winamp, Qmmp features a familiar, customizable interface that supports both Winamp and XMMS skins, making it instantly recognizable to long-time users. It handles a wide variety of audio formats including MP3, OGG Vorbis, FLAC, WAV, AAC, and many others, ensuring smooth playback across diverse music libraries. In addition to basic playback, Qmmp offers advanced features such as a 10-band equalizer, crossfading, gapless playback, and audio visualization plugins. Users can manage playlists efficiently, create and save multiple lists, and even enable streaming from online sources. Plugin support extends the player’s capabilities, allowing integration of features like lyrics display, ReplayGain, and more. Built with the Qt framework, Qmmp runs smoothly and efficiently, making it ideal even for older systems. 10 great QMMP features you might not know: Global Hotkeys Support – Control playback using customizable system-wide keyboard shortcuts. CUE Sheet Support – Automatically detects and plays tracks from CUE files for full album playback. Last.fm Scrobbling – Integrated support for sending playback data to Last.fm. Audio CD Playback – Play music directly from audio CDs. Command Line Interface – Control Qmmp via command-line options for scripting or automation. System Tray Integration – Minimize to and control playback from the system tray. MPRIS Support – Integration with desktop media player controls via the MPRIS (Media Player Remote Interfacing Specification) interface. Spectrum Analyzer and Oscilloscope – Built-in visualizations for real-time audio feedback. Configurable Notifications – Custom pop-ups for track changes and playback status. Multiple Output Backends – Support for ALSA, PulseAudio, JACK, and more, offering flexible audio routing. Qmmp 2.3.3 changelog: fixed build with PipeWire versions less than 0.3.50; fixed settings dialog layout; fixed default CUE encoding; fixed possible null pointer dereference; fixed tracks order when added using drag and drop (2.3.3 only); fixed uninitialized structure usage; improved sid plugin: added libsidplayfp 3.0 support; added feature to build without residfp engine; fixed memory leak; fixed displaying audio information; updated Japanese translation (2.3.3 only). Download: Qmmp 64-bit | 24.0 MB (Open Source) Download: Qmmp 32-bit | 24.1 MB View: Qmmp Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • BATorrent 3.0.3 is out.
    • The current Statcoungter desktop numbers has Google Chrome increasing it's market share this past year and currently commanding 75% share. Everybody else is just making up the numbers with even MS Edge losing 3% this past year and has dipped just below 10% share which is staggering considering it's default on every Windows deviced purchased. If these numbers are correct that terrible Edge number is both devastating and embarrassing for MS especially when you add in the terribly low Bing market share. This leads me to ask a couple of questions as the default browser holding just less than 10% market share seems really weird. It used to be that all Chromium browsers were being counted as Google Chrome in some cases.  Is this still happening? Do these high Google Chrome numbers contains some Edge user numbers?
    • Yeah, all web browsers seem to have some junk in them these days. The regular Brave browser has a lot of unnecessary stuff in it, similar to Microsoft Edge, so I don't see any benefits of using Brave over Microsoft Edge if you already have Microsoft Edge fully set up with ad blockers and that. The cleanest or best free browser outside of 'Microsoft Edge' I’ve tried so far is 'Samsung Browser'. It has very little bloat and is a nice-looking web browser with an inbuilt 'Ad blocker'. I also really like the web browser called 'Floorp' that is based on Firefox. This browser can also install Chrome extensions. I have a system wide Ad blocking program for Windows 11 that doesn't just blocks ads in the web browser, but over the whole system. I don't really need a web browser with an inbuilt ad blocker because of that.
  • Recent Achievements

    • Rookie
      moog19 went up a rank
      Rookie
    • Mentor
      grik went up a rank
      Mentor
    • Dedicated
      JKR earned a badge
      Dedicated
    • One Year In
      CHUNWEI earned a badge
      One Year In
    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
  • Popular Contributors

    1. 1
      +primortal
      491
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      Skyfrog
      75
    4. 4
      Steven P.
      68
    5. 5
      FloatingFatMan
      63
  • Tell a friend

    Love Neowin? Tell a friend!