Apple Restricts Hard Drive Replacements on New iMacs


Recommended Posts

Apple Restricts Hard Drive Replacements on New iMacs

As noted by Other World Computing, Apple has implemented a new temperature sensor system on its latest iMac models that significantly hampers the ability of users to replace their original hard drives in the case of failure or a desire to upgrade. Without the custom 7-pin hard drive cable and proprietary firmware included on stock hard drives in the new machines, the new iMacs' fans spin to full speed and the machines fail to pass the Apple Hardware Test.

For the main 3.5" SATA hard drive bay in the new 2011 machines, Apple has altered the SATA power connector itself from a standard 4-pin power configuration to a 7-pin configuration. Hard drive temperature control is regulated by a combination of this cable and Apple proprietary firmware on the hard drive itself. From our testing, we've found that removing this drive from the system, or even from that bay itself, causes the machine's hard drive fans to spin at maximum speed and replacing the drive with any non-Apple original drive will result in the iMac failing the Apple Hardware Test (AHT).

As the report notes, the change does mean that anyone seeking to replace the hard drive in a new iMac will have to go through Apple, limiting options and increasing costs.

It is not a matter of "if" but rather a matter of "when" your hard drive is going to fail. We preach this all the time in regards to having a proper backup strategy in place to prepare from when that failure happens. But it seems now, that when that happens to the main drive on your iMac, you're left with two options - buy a new drive from Apple and have them install it via one of their Authorized Service Centers, or enjoy the rather large Apple logoed paperweight on your desk. Want a 3.5" drive larger than 2TB? Too bad - Apple doesn't offer them.

Apple has not officially supported do-it-yourself hard drive replacements on the iMac for many years, but many users have still elected to take on the task themselves or have others not specifically authorized by Apple perform the swap for them.

Source: Mac Rumors

Ugh, it's kind of unfortunate that they felt the need to do this... I'm sure it has some technical benefits while the drive is working, but surely they would have realized that people swap their drives when their iMacs are out of warranty...

  • Like 3

I'm sorry but this is BS....... When people like Dell had non-standard power supplies people where all up in arms about how it wasn't replaceable, but this is a darn hard drive..... these have been standardized since forever...... stop being so stupid apple.... the standardization people should be screaming about this but most of them are probably in bed with their mac's right now making love to them....

This is why is always good idea to buy an Apple Care Support.

You shouldnt HAVE to pay $170 just because Apple thinks its funny to make non-standard connectors. Most other computers allow you to swap out parts.

  • Like 5

just wait till they glue your case shut and make it unable to replace ANYTHING and treat it like an iPhone / iPod / iPad where nothings replaceable...... then make propitiatory Keyboard and mouse ports and take us back to the 1980's with hardware interoperability again.....

  • Like 3

Well it surprises me it took this long for apple to do something like this. They are a hardware company after all. Still only people who lose out are people who actually own a mac, so they weren't to bright in their purchasing decision anyway. (with upgrades in mind at least)

the unibody and the macbook (pros) are a big deterrent .... now only you cannot replace batter (if/when it gets messed up) but now ram is also locked, airport and other things locked, now drives are locked ....

I am not saying joe doe will want to open his shiny 3000$ machine and upgrade ram/drive BUT, for those that are more tech inclined cannot do ram/HD upgrades because it will void warranty and go through a lot of grief ..... crap move

What a dirtbag move by Apple. I hope they reverse this decision after it gets some attention in the blogsphere.

Its too late the machines are already out i dont think they are going to re-engineer the hardware and firmware because of a few disgruntled people on the internet.

the unibody and the macbook (pros) are a big deterrent

Why?

You can replace the hard drive and ram very easily in the MBP's.

Its only the macbook air where you can't replace things so easily (well, and now the new iMac).

  • Like 1

What a dirtbag move by Apple. I hope they reverse this decision after it gets some attention in the blogsphere.

Why?

I'm sorry but the guys who "open their boxes and replace stuff" are an insignificant minority of the overall computer users - no matter how much noise they make out of it and Apple knows this. They could make all components in all of their machines non-user changeable and no one would give a rats ass except a few few people in online forums.

Sure, people like you and me would suffer from this but we are, after all, a very - VERY small portion of their userbase. Barely a blip on the radar.

Hard drives are not meant to be user-replaceable in iMacs anyway. All you can mess with is the RAM unless you tear the whole thing apart.

Exactly, the all-in-one computers are suppose to be non upgradable. The only thing you can mess is with memory. You want upgradable parts? buy a Mac Pro.

Why?

I'm sorry but the guys who "open their boxes and replace stuff" are an insignificant minority of the overall computer users - no matter how much noise they make out of it and Apple knows this. They could make all components in all of their machines non-user changeable and no one would give a rats ass except a few few people in online forums.

Sure, people like you and me would suffer from this but we are, after all, a very - VERY small portion of their userbase. Barely a blip on the radar.

Right and what happens when your warranty runs out and your HDD dies, do you go to your local/favourite store and pick up a cheap hard drive.....no you cant you have to pay Apples prices because they are propietary connectors.

I already had this problem with my current iMac. The SSD I replaced my internal drive with didn't have a place to connect the temperature sensor cable. I have to use shell scripts on launch to limit the fan speed. I'm sure it wouldn't pass the AHT because that cable is unplugged.

Right and what happens when your warranty runs out and your HDD dies, do you go to your local/favourite store and pick up a cheap hard drive.....no you cant you have to pay Apples prices because they are propietary connectors.

Hey, that sounds exactly like... my car.

'sup Jenson, let's demand that car manufacturers standardize everything?

  • Like 3
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Never had a problem with TPM and started using that many years ago in Win10. Through several motherboards and OS versions, it just does what it does without complaint. My games library doesn't even know it's there. Secure boot does a lot more than support anti-cheat, as it came along long before anti-cheat software. I've used it religiously since before I started using TPM, and I always liked it for being able to nullify virus contagions that try their best to come in underneath the firmware during boot, so that the OS doesn't see them, etc. That is its purpose, imo. I'll never understand why people who elect to use another OS feel compelled to run down Windows... I guess they need to do that to feel secure about their choices? I run Windows because it supports all the software (including games) natively that I want to buy, and I've never had to run down another OS to make me feel better about it. (Although it's certainly possible to do that, of course...) Win10 is on a ventilator atm, and Win11 is very close to being free, and I finally got to stop running StartAllBack as I moved to the Experimental/Dev channel and my 26300.8553 build supports the moveable taskbar and it's running fine at the top of the screen! Finally, my last major dislike of Win11 is being rectified! So, I'm not at all surprised to see Win11's share of the Steam survey hitting 70%.
    • I can answer about the Linux bit. I only used AMD GPUs. I currently have a 9060XT (8GB) that fits my needs, I'm not a gamer, so I don't need that much GDDR. But lately, NVIDIA has grown a lot in the recent years. Oh, the horrors of NVIDIA drivers not working. But they have been getting better. I know a lot of members onm here that are running cachyOS and other distros, and are fine with a 4090/5090 variants. Really, though, I would stick with AMD variants.
    • Everything they say you can already do yourself on the registry by changing some things.
    • Artist's renderings are so much nicer to view than the real thing, don't you think?
    • WildBit Viewer 6.20 released; no further updates planned by Razvan Serea WildBit Viewer is a popular, fast, and extensive image viewer offering a comprehensive suite of tools for photographers, designers, and image enthusiasts. It includes a powerful Viewer, Slide Show, Editor, Search, Profile Switcher, and Multi-Screen Viewer. The Viewer provides blazing-fast folder, file list, and thumbnail navigation with customizable headers, full-screen view, and a shell toolbar to organize favorite folders. It supports all major graphic formats (over 70), including JPEG, TIFF, PNG, BMP, GIF, PCX, TGA, and RAW formats. Detailed Image Info shows EXIF, IPTC, and XMP metadata, with rotation based on EXIF orientation, wallpaper setting, image comparison, geo-tag viewing, color labels, and CMS-aware color management. The Slide Show module offers 176 transition effects, multi-monitor support, custom shows with per-image settings, image marking, zoom, rotate, and desktop hiding for a professional viewing experience. The Editor supports advanced image manipulation, including crop, resize, color adjustments, curves, edge detection, effects, batch processing, retouching, layer support, and printing. Users can apply mass renaming, update or clear metadata, and work with multi-page TIFFs and animated GIFs. Search allows filtering by name, location, date, size, attributes, and metadata, while the Profile Switcher saves and loads custom layouts for all modules. The Multi-Screen Viewer opens multiple windows on available monitors, allowing simultaneous image viewing with independent zoom, pan, and rotation. WildBit Viewer also supports portable operation, 32- and 64-bit versions, Unicode, high-DPI displays, and multiple Windows styling options. With its combination of speed, versatility, and rich feature set, WildBit Viewer is an indispensable tool for managing, editing, and showcasing images efficiently. WildBit Viewer key features: Blazing-fast folder, file list, and thumbnail browsing Supports 70+ image formats including JPEG, TIFF, PNG, BMP, GIF, and RAW Full-screen view with multi-monitor support Explorer-style file handling with customizable headers Thumbnail Browser with sorting, view change, and fast size adjustment EXIF, IPTC, and XMP metadata viewing and editing Automatic rotation based on EXIF orientation Shell toolbar for organizing favorite folders Image Compare to calculate similarity between images Mass renaming and batch metadata updates File List Generator (HTML, CSV, RTF, TXT, Unicode) Rating and color labels, CMS-aware color management Video playback (AVI, MPG, MPEG, WMV) Animated GIF, multipage TIFF, Camera RAW support Slide Show with 176 transition effects and custom settings Editor: crop, resize, rotate, flip, canvas resize, and retouching tools Batch processing and image format conversion Multi-Screen Viewer: multiple windows with independent zoom, pan, and rotate Profile Switcher: save, load, reset, delete module profiles Portable operation, 32-/64-bit support, Unicode, and high-DPI ready WildBit Viewer 6.20 changelog: Viewer, Slide Show, Editor, Search, Profile Switcher & Multi Screen Viewer. Updated ImageEn to 15.0.0 version. Viewer, Slide Show, Editor, Search, Profile Switcher & Multi Screen Viewer. Updated Jedi JCL&JVCL. Viewer - Image Geo Info, OpenStreetMap removed. Slide Show Remote Mode removed. Note! This means that WildBit Slide Show Remote is now officially EOL. Editor - Shortcut keys for Capture removed. Optimized code. Note! This version includes help what supersedes all previous releases. plus Lots of bug fixes and changes, check Readme files for details. WildBit Viewer End‑of‑Life WildBit Viewer has reached its final release with version 6.20. As development comes to a close, no further feature updates are planned. WildBit Slide Show Remote reached End-of-Life on 06 June 2026, while WildBit Viewer will reach End-of-Life on 30 June 2026. Downloads will remain available until the end of July 2026 (possibly extending into early August). After End-of-Life, the software will no longer receive updates, security fixes, or technical support. Download: WildBit Viewer 64-bit | Portable 64-bit | ~70.0 MB (Freeware) Download: WildBit Viewer 32-bit | Portable 32-bit Links: WildBit Viewer Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      252
    3. 3
      Steven P.
      71
    4. 4
      +Edouard
      69
    5. 5
      FloatingFatMan
      68
  • Tell a friend

    Love Neowin? Tell a friend!