Apple Restricts Hard Drive Replacements on New iMacs


Recommended Posts

Apple Restricts Hard Drive Replacements on New iMacs

As noted by Other World Computing, Apple has implemented a new temperature sensor system on its latest iMac models that significantly hampers the ability of users to replace their original hard drives in the case of failure or a desire to upgrade. Without the custom 7-pin hard drive cable and proprietary firmware included on stock hard drives in the new machines, the new iMacs' fans spin to full speed and the machines fail to pass the Apple Hardware Test.

For the main 3.5" SATA hard drive bay in the new 2011 machines, Apple has altered the SATA power connector itself from a standard 4-pin power configuration to a 7-pin configuration. Hard drive temperature control is regulated by a combination of this cable and Apple proprietary firmware on the hard drive itself. From our testing, we've found that removing this drive from the system, or even from that bay itself, causes the machine's hard drive fans to spin at maximum speed and replacing the drive with any non-Apple original drive will result in the iMac failing the Apple Hardware Test (AHT).

As the report notes, the change does mean that anyone seeking to replace the hard drive in a new iMac will have to go through Apple, limiting options and increasing costs.

It is not a matter of "if" but rather a matter of "when" your hard drive is going to fail. We preach this all the time in regards to having a proper backup strategy in place to prepare from when that failure happens. But it seems now, that when that happens to the main drive on your iMac, you're left with two options - buy a new drive from Apple and have them install it via one of their Authorized Service Centers, or enjoy the rather large Apple logoed paperweight on your desk. Want a 3.5" drive larger than 2TB? Too bad - Apple doesn't offer them.

Apple has not officially supported do-it-yourself hard drive replacements on the iMac for many years, but many users have still elected to take on the task themselves or have others not specifically authorized by Apple perform the swap for them.

Source: Mac Rumors

Ugh, it's kind of unfortunate that they felt the need to do this... I'm sure it has some technical benefits while the drive is working, but surely they would have realized that people swap their drives when their iMacs are out of warranty...

  • Like 3

I'm sorry but this is BS....... When people like Dell had non-standard power supplies people where all up in arms about how it wasn't replaceable, but this is a darn hard drive..... these have been standardized since forever...... stop being so stupid apple.... the standardization people should be screaming about this but most of them are probably in bed with their mac's right now making love to them....

  • Like 4

This is why is always good idea to buy an Apple Care Support.

You shouldnt HAVE to pay $170 just because Apple thinks its funny to make non-standard connectors. Most other computers allow you to swap out parts.

  • Like 5

just wait till they glue your case shut and make it unable to replace ANYTHING and treat it like an iPhone / iPod / iPad where nothings replaceable...... then make propitiatory Keyboard and mouse ports and take us back to the 1980's with hardware interoperability again.....

  • Like 3

Well it surprises me it took this long for apple to do something like this. They are a hardware company after all. Still only people who lose out are people who actually own a mac, so they weren't to bright in their purchasing decision anyway. (with upgrades in mind at least)

the unibody and the macbook (pros) are a big deterrent .... now only you cannot replace batter (if/when it gets messed up) but now ram is also locked, airport and other things locked, now drives are locked ....

I am not saying joe doe will want to open his shiny 3000$ machine and upgrade ram/drive BUT, for those that are more tech inclined cannot do ram/HD upgrades because it will void warranty and go through a lot of grief ..... crap move

What a dirtbag move by Apple. I hope they reverse this decision after it gets some attention in the blogsphere.

Its too late the machines are already out i dont think they are going to re-engineer the hardware and firmware because of a few disgruntled people on the internet.

the unibody and the macbook (pros) are a big deterrent

Why?

You can replace the hard drive and ram very easily in the MBP's.

Its only the macbook air where you can't replace things so easily (well, and now the new iMac).

  • Like 1

What a dirtbag move by Apple. I hope they reverse this decision after it gets some attention in the blogsphere.

Why?

I'm sorry but the guys who "open their boxes and replace stuff" are an insignificant minority of the overall computer users - no matter how much noise they make out of it and Apple knows this. They could make all components in all of their machines non-user changeable and no one would give a rats ass except a few few people in online forums.

Sure, people like you and me would suffer from this but we are, after all, a very - VERY small portion of their userbase. Barely a blip on the radar.

Hard drives are not meant to be user-replaceable in iMacs anyway. All you can mess with is the RAM unless you tear the whole thing apart.

Exactly, the all-in-one computers are suppose to be non upgradable. The only thing you can mess is with memory. You want upgradable parts? buy a Mac Pro.

Why?

I'm sorry but the guys who "open their boxes and replace stuff" are an insignificant minority of the overall computer users - no matter how much noise they make out of it and Apple knows this. They could make all components in all of their machines non-user changeable and no one would give a rats ass except a few few people in online forums.

Sure, people like you and me would suffer from this but we are, after all, a very - VERY small portion of their userbase. Barely a blip on the radar.

Right and what happens when your warranty runs out and your HDD dies, do you go to your local/favourite store and pick up a cheap hard drive.....no you cant you have to pay Apples prices because they are propietary connectors.

I already had this problem with my current iMac. The SSD I replaced my internal drive with didn't have a place to connect the temperature sensor cable. I have to use shell scripts on launch to limit the fan speed. I'm sure it wouldn't pass the AHT because that cable is unplugged.

Right and what happens when your warranty runs out and your HDD dies, do you go to your local/favourite store and pick up a cheap hard drive.....no you cant you have to pay Apples prices because they are propietary connectors.

Hey, that sounds exactly like... my car.

'sup Jenson, let's demand that car manufacturers standardize everything?

  • Like 3
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The fact I need to use "Show more" like 99% of the time is so annoying. Or why I have 7-zip under 3 submenus when it could be in top. And Microslop keeps saying how they'll improve Start and I've not seen ANY improvement yet. In MONTHS. WTF?! I'll believe any of it when they actually deliver anything.
    • LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Doesn't even need a UI for point 2 - use some sort of JSON/XML container - because MOST users won't even bother.
  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      PsYcHoKiLLa
      263
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!