Recommended Posts

For anyone plugging their iDevice into the usb port on their monitor and getting Error code 9's and "unrecognized USB device" during the first device restart, unplug it from the USB port in your monitor and plug it into a port on the computer. then try the restore again.

I downloaded iOS 5 and the iTunes 10.5 beta today. The upgrade on my iPhone 4 went smoothly and quicker than I thought. One nice thing is that when it syncs now you can still use the phone. I didn't even know it was syncing everything back until I saw that some programs said "Installing..." and I iTunes said it was syncing. I'd recommend it anyone, no need to wait. The GM is the final version, even if they were to make minor changes in the next few days, you'd be caught up during the first update to iOS 5.

Don't listen to that guy. The GM is the final version. The same exact one that will be released to the public aslong as no show-stopper bugs are discovered from now until release day.

Can you confirm this? and how do I download the CDMA version? it wants me to log in.

Can you confirm this? and how do I download the CDMA version? it wants me to log in.

Well consider that the GM of iOS 2, 3 and 4 were the ones released to the public as were the GM's of Tiger, Leopard, Snow Leopard and Lion too.

It is well known that the GM is the one they intend to release and usually its only a week or 2 before the final release so that any final huge show stopper bugs (like all your files being deleted randomly or something else equally catastrophic) can be caught before the public release.

Well consider that the GM of iOS 2, 3 and 4 were the ones released to the public as were the GM's of Tiger, Leopard, Snow Leopard and Lion too.

It is well known that the GM is the one they intend to release and usually its only a week or 2 before the final release so that any final huge show stopper bugs (like all your files being deleted randomly or something else equally catastrophic) can be caught before the public release.

Thanks!

Also I shouldn't have to restore anything should I? I am on the vanilla version for my Verizon Iphone. So just figure out how to download and install and thats it?

If you are on iOS 4 you will need to perform a Restore inside iTunes to install the iOS 5 GM. It cannot be installed over iOS 4 without using the restore option in iTunes.

Thanks for the info, can you tell me how to do this? Sorry I never did this before. Im downloading the CDMA version now.

Thanks for the info, can you tell me how to do this? Sorry I never did this before. Im downloading the CDMA version now.

Connect your iPhone to your computer. Open iTunes and click on your iPhone in the left pane.

If you have a Macintosh hold down the CMD key and at the same time click on Restore inside iTunes. You will require the iTunes 10.5 Beta 7 or higher (such as Beta 9).

A file finder window will appear, navigate to the firmware file you acquired (from Apple directly I'm sure :p) and allow iTunes to work its magic.

Connect your iPhone to your computer. Open iTunes and click on your iPhone in the left pane.

If you have a Macintosh hold down the CMD key and at the same time click on Restore inside iTunes. You will require the iTunes 10.5 Beta 7 or higher (such as Beta 9).

A file finder window will appear, navigate to the firmware file you acquired (from Apple directly I'm sure :p) and allow iTunes to work its magic.

do I need to extract the .DMG file anywhere and do I need to point itunes to that file? Will i lose my music, contacts and pictures, or ringtones on my phone?

do I need to extract the .DMG file anywhere and do I need to point itunes to that file? Will i lose my music, contacts and pictures, or ringtones on my phone?

You need to first mount the DMG for the ipsw file inside (thats the firmware image) to be accessed by iTunes. Point iTunes to the ipsw file.

Yes your phone will be wiped of all data. Make sure you right click on your phone and do a backup before you perform the restore. Depending on how much data you have to be loaded it could take over an hour for your data to sync back to your phone after the upgrade.

do I need to extract the .DMG file anywhere and do I need to point itunes to that file? Will i lose my music, contacts and pictures, or ringtones on my phone?

You need to extract the IPSW from the DMG file. It's easy though. On Windows I used a trial of "TransMac". You won't lose anything. Everything is backed up prior to the upgrade, including texts, contacts, etc.

Loving the fact I can use my iPhone 4 while it's syncing...that's really nice...playing with new things, digging it so far. Bout time I got something other than 4.2.X to play with on my Verizon iPhone, been wanting at least the Safari performance upgrades that were put in 4.3

This topic is now closed to further replies.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      592
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!