MacBook Pro with Retina display announced


Recommended Posts

Not sure why people are complaining about the lack of the ethernet port. If you can afford the cost of the laptop itself and need ethernet, then I'm pretty sure you can afford another $29. I can't say I've ever used that port on my laptop in the 4 years I've had it. And I'm sure most people are the same way.

Not sure why either. I mean, when a company says something along the lines of, "We wanted to make a next generation device without being held back by legacy," what did people think would happen? Puppies and rainbows?

I don't mind the ethernet being shifted to an adapter if it helps slim down the casing. I haven't been able to plug a VGA or DVI cable into a Mac laptop for years either without an adapter.

As for optical drives, I bought a Zalman VE200 recently so I'm just about out of nails for physical media's coffin.

The only concern I have is for the non-replaceable batteries, but I'm assuming they're good for a fair few years.

*cough cough* :p

:p Yea yea.

Firewire isn't totally dead yet, but it's clear that Apple is replacing it with Thunderbolt. Thunderbolt has taken over every function that Firewire used to serve for a Mac (including Target Disk Mode).

Firewire isn't totally dead yet, but it's clear that Apple is replacing it with Thunderbolt. Thunderbolt has taken over every function that Firewire used to serve for a Mac (including Target Disk Mode).

Yeah, except prices are just insanely high. The other day I saw this Thunderbold hub: ?250 + ?45 for a cable. That's almost ?100 more I paid for the LaCie d2 Quadra v3 2 TB. :/

Yeah, except prices are just insanely high. The other day I saw this Thunderbold hub: ?250 + ?45 for a cable. That's almost ?100 more I paid for the LaCie d2 Quadra v3 2 TB. :/

FireWire was the same way for a while too. It'll level out eventually.

FireWire was the same way for a while too. It'll level out eventually.

What I meant was until it happens for the vast majority of people Thunderbold just isn't a viable option. It also offers no real advantage for external storage unless you use SSDs or start daisy chaining multiple drives.

Not sure why either. I mean, when a company says something along the lines of, "We wanted to make a next generation device without being held back by legacy," what did people think would happen? Puppies and rainbows?

I certainly was not expecting puppies and rainbows.

Just got my ship notice from Apple for mine. I had been waiting years for an upgrade like this. I had been putting money aside since last fall when the refresh wasn't what I expected. The one I built was pretty maxed out as I intend to use this one for a long time:

  • 2.6GHz Quad-core Intel Core i7
  • 16GB 1600MHz DDR3L SDRAM
  • 512GB Flash Storage

Just got my ship notice from Apple for mine. I had been waiting years for an upgrade like this. I had been putting money aside since last fall when the refresh wasn't what I expected. The one I built was pretty maxed out as I intend to use this one for a long time:

  • 2.6GHz Quad-core Intel Core i7
  • 16GB 1600MHz DDR3L SDRAM
  • 512GB Flash Storage

Nice. :D When did you place your order and what was your expected shipping time? Trying to get a feel for if they're ahead of schedule or not.

Nice. :D When did you place your order and what was your expected shipping time? Trying to get a feel for if they're ahead of schedule or not.

I ordered mine when it said Shipping 5-7 business days on June 11th (this was about an hour after the WWDC conference). It shipped 4 days later (June 15th), so they are a day before their said time right now. I couldn't even tell you how quickly they are shipping now though.

Had an opportunity today to play with the MBP w/ Retina Display. Wow, it's nice. Really, really nice. Even the build quality is noticeably better from the older unibody models, including the Air. All the curves felt smoother, especially the notch where you lift the lid, it had a nice angled design to it rather than being the fairly sharp metal of before.

Only thing I don't like is the new MagSafe 2 connector, it's reverted back to the original design that stuck straight out as opposed to the superior design that hugged the notebook much closer.

I would get it except I'm probably going to wait on the hopes that Retina Displays eventually come to the 13'' Pro models as well as the 11'' Air. Might be a long time, but I'm okay with waiting.

On the subject of memory being fixed, yes I appreciate that for repairs you want to be able to swap out the memory but for upgrading how is it different from the 3 Dell laptops before my MBP and indeed my MBP which could only take 2/4/4/4GB of memory respectively anyway - and they were maxed out on ordering.

So for the last 10 years I've never needed to or been able to upgrade my memory in a laptop.

Surely many people who use macbooks use them for just browsing.... word... and that's all apparently.

I use each and one of my available ports, in fact, I've felt that I need even more ports:

2 USB 3.0 -> One conected to a USB 3.0 hub, another to a USB 3.0 harddrive

USB 3.0 hub (4 ports) -> usb 2.0 HDD, external soundcard, bluetooth, 1 port free for pen drives

2 USB 2.0 -> One always connected to a mouse and the other often connected to a PLC or any other programmable usb device.

Ethernet port -> Not only works for internet, many PLCs or programmable devices program themselves using that port, not to mention one also needs to monitor the internal behavior of such devices. Also, transfer speeds are of about 100 Mb/s vs 6mb/s to a wireless N router.

HDMI -> connected to my second screen

VGA -> not used because it's to close to HDMI, I need an slimmer connector...

Audio ports -> this is the only thing not often used, and it's just because I have an external sound card.

So.... macbooks are quite just the decorative PC that can't do pretty much anything. (O yeah, but they have a shiny high-res screen)

So.... macbooks are quite just the decorative PC that can't do pretty much anything. (O yeah, but they have a shiny high-res screen)

No, you are missing the point. It's a laptop - a mobile device.

For everything else you described I have a desktop that would smoke any of these laptops..

No, you are missing the point. It's a laptop - a mobile device.

For everything else you described I have a desktop that would smoke any of these laptops..

I agree. Let's see you bring your immobile desktop with you on the bus. LOL.

No, you are missing the point. It's a laptop - a mobile device. For everything else you described I have a desktop that would smoke any of these laptops..

In any case, I still can call it "mobile device" and at the same time smoke any of these macbooks.

In any case, I still can call it "mobile device" and at the same time smoke any of these macbooks.

And pray tell what "smoking" tasks are you referring to, because you are aware you can store your porn in the cloud now.

I bought an IBM box last year that cost 50K and it doesn't even have USB3, hell it doesn't even have USB, the keyboard is connected via PS2. It has no HDMI and the VGA only outputs to a green screen but I can guarantee you it would "smoke" your PC any day of the week. Perhaps you can now see how silly your argument sounds.

Most companies still have 802.11B/G and just a handful of WAPs shared by hundreds of users. In a Professional environment (hint: Pro) ethernet is still much better in about every single case. In my office the VGA/DVI dongles are lost by the dozen every month with my users, I don't even want to think about the added cost of having to constantly replace thunderbolt ethernet adapters. For my company the non-retina pro will stay the standard for a long time, and the retina will probably be asked for by our video teams and presidents.

The problem though is that I have yet to find an fiber adapter for TB since that's how they connect to their xSAN.

2 USB 2.0 -> One always connected to a mouse and the other often connected to a PLC or any other programmable usb device.

Ethernet port -> Not only works for internet, many PLCs or programmable devices program themselves using that port, not to mention one also needs to monitor the internal behavior of such devices. Also, transfer speeds are of about 100 Mb/s vs 6mb/s to a wireless N router.

Ah, PLCs. I already have a bag full of cables for different brands and generations, including a USB to RS232 converter since only the latest PLCs have native USB support. In some cases I even have to use two converters to get from USB to the manufacturer's port. I don't see what one more adapter for gigabit Ethernet is going change. Since I usually carry my own cable anyway it's just a matter of leaving the adapter snapped onto one end.

Really that doesn't matter so much since I don't use my existing Macbook, which does have an Ethernet port, for field PLC programming anyway. I leave that job to $400 Thinkpads that do the job just fine. It isn't so heart breaking when one gets dropped or is used as a tool shelf.

The problem though is that I have yet to find an fiber adapter for TB since that's how they connect to their xSAN.

Like this? http://www.promise.c...rsn1=40&rsn3=49

I bought an IBM box last year that cost 50K and it doesn't even have USB3, hell it doesn't even have USB, the keyboard is connected via PS2. It has no HDMI and the VGA only outputs to a green screen but I can guarantee you it would "smoke" your PC any day of the week. Perhaps you can now see how silly your argument sounds.

I think you are misunderstanding the term "smoking" as raw power which clearly is not. Hint: Connectivity.

Ah, PLCs. I already have a bag full of cables for different brands and generations, including a USB to RS232 converter since only the latest PLCs have native USB support. In some cases I even have to use two converters to get from USB to the manufacturer's port. I don't see what one more adapter for gigabit Ethernet is going change. Since I usually carry my own cable anyway it's just a matter of leaving the adapter snapped onto one end. Really that doesn't matter so much since I don't use my existing Macbook, which does have an Ethernet port, for field PLC programming anyway. I leave that job to $400 Thinkpads that do the job just fine. It isn't so heart breaking when one gets dropped or is used as a tool shelf. Like this? http://www.promise.c...rsn1=40&rsn3=49

OMRON PLCs have that option, it's quite good actually, rs232 always disconnects and I really don't that

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • What I like about Paint is using it almost exclusively for cropping and resizing images I get elsewhere--it's quick, easy and cheap... I keep it glued to my taskbar, in fact. Also, the clipping tool comes in handy, as well (hit print scrn on the keyboard and it activates immediately.)
    • I still remember it fondly today. It was so cool to work in 64-color Half Bright mode and 4.096-color HAM mode (interlaced) when x86 was still in 4-color CGA or 16-color EGA low res. C= never realized what it had until it was far too late--the failure of C= was the failure of its top management. The C= Amiga was 20 years ahead of its time, I always thought. It didn't hurt that in only 512k of chip memory, the Amiga could preemptively multitask when Apple was still doing gray scale graphics on tiny screens and along with everyone else was doing cooperative multitasking (running more than one app at a time in resident memory, but you could only run one of them at a time--had to manually switch between them.) I had a ball with AREXX scripting running between programs that had AREXX ports so that when you sent other applications data and instructions, those running applications could process the same in real time to output! Memories...
    • I'm not sure about that, but it at least "does" a version of 7.1 that this brand new card doesn't....
    • Floorp 12.15.2 by Razvan Serea Floorp is a cutting-edge web browser that combines the trusted foundation of Mozilla's Firefox with a unique Japanese perspective, offering users an exceptional online experience. This open-source browser prioritizes privacy, customization, and security. Floorp is transparent, with no user tracking or data sharing, and it's completely open source. With a strict no-tracking policy and full transparency, your personal information remains private. As an open-source project, Floorp not only shares its source code but also its build environment, inviting users to contribute and build their unique versions. The regular updates, based on Firefox ESR, ensure that you always have the latest features and security enhancements. Floorp key features: Strong Tracking Protection: Floorp offers robust tracking protection, safeguarding users from malicious tracking and fingerprinting on the web. Flexible Layout: Customize Floorp's layout to your heart's content, including moving the tab bar, hiding the title bar, and more for a personalized browsing experience. Switchable Design: Choose from five distinct designs for the Floorp interface, and even switch between OS-specific designs for a unique look Regular Updates: Based on Firefox ESR, Floorp receives updates every four weeks, ensuring up-to-date security even before Firefox's releases. No User Tracking: Floorp prioritizes user privacy by abstaining from collecting personal information, tracking users, or selling user data, with no affiliations with advertising companies. Completely Open Source: The full source code for Floorp is open to the public, allowing transparency and enabling anyone to explore and build their own version. Dual Sidebar: Floorp features a versatile built-in sidebar for webpanels and browsing tools, making it perfect for multitasking and quick access to bookmarks, history, and websites. Flexible Toolbar & Tab Bar: Customize your browser with Tree Style Tabs, vertical tabs, and bookmark bar modifications, catering to both beginners and experts in customization. User-Centric Web Experience: Floorp prioritizes user privacy and collaboratively blocks harmful trackers. Floorp 12.15.2 changelog: fix: reset tab drag state on dragend to prevent position offset (#2488) by @Ryosuke-Asano in #2497 fix(workspaces): hide split view wrapper when all tabs are hidden by @Ryosuke-Asano in #2495 fix(split-view): prevent stuck pointer-events:none after drag on web content by @Ryosuke-Asano in #2492 feat(design): add Gecko 152 CSS variable aliases and Lepton compatibility layer by @Ryosuke-Asano in #2494 fix(workspaces): exitOnLastTabClose no longer quits Floorp when closing the last tab by @Ryosuke-Asano in #2498 Download: Floorp 64-bit | 95.0 MB (Open Source) Links: Floorp Website | Github Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I can barely recall getting web results from a file search... I must've turned it off long ago. 26H2 is Insider's Preview build 26300.8697, which I am running, atm. It is not available for people running the standard commercial builds of Windows--only for the beta test Insider's group. But anyway, as mentioned in the thread, this feature has been around for a long time...
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      507
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      84
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!